Overview

Request 905642 accepted

- Update to 0.5.10:
* S3M: Honor the Stereo flag not being set. This improves the
sound of some tunes like Turbulence by Purple Motion.
* S3M: Detect MPT 1.0 alpha versions which didn’t set the Stereo
flag. In this case, the unset Stereo flag is also ignored
because MPT 1.0 alpha used the default S3M channel panning
anyway.
* S3M: Only for OPL instruments the high sample rate bits should
be ignored; for PCM instruments they are clamped to 65535 Hz.
* MOD: Do not apply ProTracker loop length quirk to MODs that
could have been made with Scream Tracker (fixes Soul-O-Matic
by Purple Motion).
* AMF (DSMI): Format revisions 1 and 9, as well as early
(technically malformed) revision 10 files, are now supported.
Surround panning commands and instrument number without note
are now converted correctly.
* AMF (DSMI): Patterns and samples were not read correctly in
some files (e.g. AVOID.AMF).
* GDM: Correctly import extra-fine portamentos.
- Update to 0.5.9:
* The retrigger effect didn’t work correctly for OPL instruments
in some cases depending on the chosen output sample rate.
* S3M: Emulate IT short sample retrigger quirk in S3M files saved
with Impulse Tracker and Schism Tracker.
* ProTracker 3.6 doesn’t support sample swapping. It is now
disabled when loading a ProTracker 3.6 IFF module.
* Some files with “hidden” garbage patterns were not played
correctly since libopenmpt 0.5.3.
* MOD: E9x retrigger now works the same way as in ProTracker 2.
* MDL: Improve auto-vibrato accuracy.
* 669: Reject files that contain any pattern tempo higher than
15.
* Reduce memory consumption of malformed XPK-compressed files.
- Update to 0.5.8:
* [Sec] Possible null-pointer dereference read caused by a
sequence of openmpt::module::read,
openmpt::module::set_position_order_row pointing to an invalid
pattern, and another openmpt::module::read call. To trigger the
crash, pattern 0 must not exist in the file and the tick speed
before the position jump must be lower than the initial speed
of the module.
* [Bug] libopenmpt 0.5.7 broke seeking in some subsongs.
* The built-in LFO plugin did not load the correct initial LFO
frequency.
* IT command S7x (instrument control) is now supported when
seeking with sample sync enabled.
* libopenmpt_ext play_note was cutting of channels even when
there were plenty of free channels to use.

Loading...
Request History
Mia Herkt's avatar

mia created request

- Update to 0.5.10:
* S3M: Honor the Stereo flag not being set. This improves the
sound of some tunes like Turbulence by Purple Motion.
* S3M: Detect MPT 1.0 alpha versions which didn’t set the Stereo
flag. In this case, the unset Stereo flag is also ignored
because MPT 1.0 alpha used the default S3M channel panning
anyway.
* S3M: Only for OPL instruments the high sample rate bits should
be ignored; for PCM instruments they are clamped to 65535 Hz.
* MOD: Do not apply ProTracker loop length quirk to MODs that
could have been made with Scream Tracker (fixes Soul-O-Matic
by Purple Motion).
* AMF (DSMI): Format revisions 1 and 9, as well as early
(technically malformed) revision 10 files, are now supported.
Surround panning commands and instrument number without note
are now converted correctly.
* AMF (DSMI): Patterns and samples were not read correctly in
some files (e.g. AVOID.AMF).
* GDM: Correctly import extra-fine portamentos.
- Update to 0.5.9:
* The retrigger effect didn’t work correctly for OPL instruments
in some cases depending on the chosen output sample rate.
* S3M: Emulate IT short sample retrigger quirk in S3M files saved
with Impulse Tracker and Schism Tracker.
* ProTracker 3.6 doesn’t support sample swapping. It is now
disabled when loading a ProTracker 3.6 IFF module.
* Some files with “hidden” garbage patterns were not played
correctly since libopenmpt 0.5.3.
* MOD: E9x retrigger now works the same way as in ProTracker 2.
* MDL: Improve auto-vibrato accuracy.
* 669: Reject files that contain any pattern tempo higher than
15.
* Reduce memory consumption of malformed XPK-compressed files.
- Update to 0.5.8:
* [Sec] Possible null-pointer dereference read caused by a
sequence of openmpt::module::read,
openmpt::module::set_position_order_row pointing to an invalid
pattern, and another openmpt::module::read call. To trigger the
crash, pattern 0 must not exist in the file and the tick speed
before the position jump must be lower than the initial speed
of the module.
* [Bug] libopenmpt 0.5.7 broke seeking in some subsongs.
* The built-in LFO plugin did not load the correct initial LFO
frequency.
* IT command S7x (instrument control) is now supported when
seeking with sample sync enabled.
* libopenmpt_ext play_note was cutting of channels even when
there were plenty of free channels to use.


Factory Auto's avatar

factory-auto added opensuse-review-team as a reviewer

Please review sources


Factory Auto's avatar

factory-auto accepted review

Check script succeeded


Saul Goodman's avatar

licensedigger accepted review

ok


Dominique Leuenberger's avatar

dimstar_suse set openSUSE:Factory:Staging:F as a staging project

Being evaluated by staging project "openSUSE:Factory:Staging:F"


Dominique Leuenberger's avatar

dimstar_suse accepted review

Picked "openSUSE:Factory:Staging:F"


Dominique Leuenberger's avatar

dimstar accepted review


Dominique Leuenberger's avatar

dimstar_suse accepted review

Staging Project openSUSE:Factory:Staging:F got accepted.


Dominique Leuenberger's avatar

dimstar_suse approved review

Staging Project openSUSE:Factory:Staging:F got accepted.


Dominique Leuenberger's avatar

dimstar_suse accepted request

Staging Project openSUSE:Factory:Staging:F got accepted.

openSUSE Build Service is sponsored by