- Update to version 1.28:
* New meson options testplan, sphinx and xe_driver.
* Add amdgpu GFX1036, GFX1037 chips.
* Add xe_pciids.h with Lunar Lake (LNL) support.
* Use the new procps library libproc2.
* Add helper for srandom seed initialization.
* Support for vmwgfx driver.
* i915_pciids.h updated to include Pontevecchio (PVC) platform.
* Add OAM formats and support for media engines in perf tests.
* Support for Xe driver.
* igt_runner can now dump GPU state on timeout.
* igt_runner will now use proper 'abort' as result instead of pseudoresult.
* New vendor agnostic gputop tool.
* New tool to dump Intel GuC/HuC CSS header.
* Improve tools intel_watermark, intel_vbt_decode, intel_reg.
* New way for documenting tests will allow to generate documentation and
testlists during build, see README.md and test_documentation.md. This
is mandatory for Intel (both i915 and xe) and kms tests.
* Move intel specific tests to new directory.
* Ported and refactored drmlib security tests in amdgpu.
* Switch DRM selftests to KUnit.
* Enabled MeteorLake aux ccs tests.
* Exercise oversized object detection for Xe.
* Enable validation for VDSC output formats.
* Add support for Bigjoiner / 8K mode.
* Use intel_cmds_info library.
* Use Intel kernel gpu command definitions.
* Add a basic perf_pmu test.
* Add test for V3D's Wait BO IOCTL.
* Add i915_power test for power measurement.
* Remove sysfs_clients.
- Remove intel-gpu-tools-libproc2_libproc2_library.patch (fixed upstream)
- Remove u_intel-gpu-tools-1.7-fix-bashisms.patch (obsolete)
- Build against libproc2 instead of libprocps
* intel-gpu-tools-libproc2_libproc2_library.patch
- Update to version 1.27.1:
* Support for Intel discrete graphics and other new platforms (Andrzej
Turko, Matt Roper, Clint Taylor, Tejas Upadhyay, et al)
* Support for MSM driver. (Mark Yacoub, Rob Clark)
* Support for SRIOV device selection. (Łukasz Łaguna)
* Tiled display emulation support with chamelium. (Kunal Joshi)
* Support for Chamelium v3. (Mark Yacoub)
* Initial FreeBSD support. (Jake Freeland)
* Structured communication from tests to igt_runner. (Petri Latvala)
* Removed last remaining uses of libdrm_intel in tests and
tools. (Zbigniew Kempczyński)
* Automatic kernel code coverage collection during testing. (Mauro
Carvalho Chehab)
- Remove intel-gpu-tools_fix-meson.patch
- Disable SUSE_ZNOW to fix failing tests on x86_64
+ https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/issues/102
- Build with meson 0.60 (intel-gpu-tools_fix-meson.patch)
+ https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/issues/107
- Update to version 1.26:
* Autotools support has been entirely dropped in favor of only meson. (Arkadiusz Hiler)
* Tests can now signal that the whole test round should be aborted. (Arkadiusz Hiler)
* Various robustness improvements for Chamelium use. (Arkadiusz Hiler,
Kunal Joshi, Imre Deak, et al)
* Device filtering improvements for multi-device use. (Arkadiusz Hiler)
* Device filtering for various Intel tools like intel_gpu_top. (Ayaz A Siddiqui)
* Overhauled kernel parameter handling. (Jani Nikula)
* Introduced an i915 batchbuffer facility. (Zbigniew Kempczyński)
* Improvements for testing nouveau. (Lyude Paul)
* More readable and useful output for lsgpu and other tools that list
devices. (Tvrtko Ursulin)
* intel_gpu_top can now show per-client busyness stats. (Tvrtko Ursulin)
* igt_runner can now limit the disk space used by a single test. (Petri Latvala)
- Switch to meson build system, Remove u_respect_cflags.diff (no longer needed)
- Update to version 1.25:
* Meson build options have been renamed. Please check the news options in
meson_options.txt and make sure you don't get any warnings when configuring
the project. (Simon Ser)
* Compile-testing CI for MIPS. (Guillaume Tucker)
* Various igt_runner reliability improvements (Petri Latvala & Arkadiusz Hiler)
* Switched GEM tests to engine discovery. (Tvrtko Ursulin et al)
* Subtests can now be documented and their descriptions are available in
generated HTML docs and on the command line via *-describe. Documenting new
tests is mandatory. (Arkadiusz Hiler)
* Unified library for EDID creation (Simon Ser)
* Chamelium port auto-discovery (Simon Ser)
* Tigerlake support (Lucas De Marchi)
* Cometlake support (Anusha Srivatsa)
* Add kernel selftest wrapper for dmabuf (Chris Wilson)
* Bumped required meson version to 0.47.2 (Arkadiusz Hiler)
* Rewritten README to be more friendly (Arkadiusz Hiler)
* Introduced dynamic subsubtests for getting partial result for
runtime*dependant features (Petri Latvala)
* IGT can now run on the selected GPU via --device and lsgpu tool (Zbigniew
Kempczyński)
* Reduced runtime of many many tests (Chris Wilson et al)
- Update to version 1.24:
* Bumped required meson version to 0.47. (Arkadiusz Hiler)
* All the meson build options that used auto, true and false are now first
class 'feature' options taking auto, enabled and disabled. (Arkadiusz Hiler)
* Piglit as the primary test executor replaced by mostly drop-in
compatible igt_runner. (Petri Latvala)
* Stack traces now contain source file names and line numbers, using
libdw. (Maarten Lankhorst)
* Pixman dependency is now mandatory. (Maxime Ripard)
* The project has moved to gitlab, and uses gitlab's CI to build test
and sanity test each commit on various distributions and
architectures. (Arkadiusz Hiler et al)
* Shader debugger removed due to lack of use and accumulation of
bitrot. (Arkadiusz Hiler)
* Added support for testing DP/HDMI audio with the Chamelium device,
dropping the audio tests that required exotic custom hardware to
execute. (Simon Ser)
* Autotools support dropped for various parts of IGT (assembler,
documentation, etc). (Daniel Vetter)
* intel-gpu-top can now output data to stdout or a log file for
noninteractive use. (Tvrtko Ursulin)
- Remove n_disable-build-of-pm_rpm.patch is no longer needed
- n_disable-build-of-gem_userptr_blits.patch
* disabled build of gem_userptr_blits test in order to fix build
on SUSE <= sle15/Leap15
- Release 1.23 (2018-08-08)
* General changes:
- Bumped used C standard to gnu11. (Lucas De Marchi)
- Bumped required meson version to 0.44. (Petri Latvala)
- Introduced meson options for explicit control over optional dependencies.
(Petri Latvala)
- Added a meson option to set runpath for the installed executables.
(Petri Latvala)
- GLib is now a mandatory dependency. (Petri Latvala)
- Added testlists for the vc4 driver. (Maxime Ripard)
- The project has now finalized its name change and is now IGT GPU Tools,
docs and install paths are now "igt-gpu-tools". (Arkadiusz Hiler)
- Added a blacklist for the Intel CI. (Petri Latvala)
* Library changes:
- i915_pciids.h updated to include KBL, ICL, WHL and AML.
(José Roberto de Souza, Paulo Zanoni)
- Overhaul of gpu_cmds, gpgpu_fill, media_fill and rendercopy.
(Katarzyna Dec, Lukasz Kalamarz)
- Added igt_matrix and igt_color_encoding helper libraries. (Ville Syrjälä)
- IGT now shows the kernel stack trace when reporting a GPU hang. (Chris Wilson)
- Added Icelake platform support. (Arkadiusz Hiler, Paulo Zanoni)
* Tools changes:
- intel-gpu-top was rewritten to be safe to use. (Tvrtko Ursulin)
* Documentation changes:
- Documented commit rights in CONTRIBUTING. (Daniel Vetter)
* Test changes:
- kms_prs_sink_crc was renamed to kms_psr. (Dhinakaran Pandiyan)
- kms_frontbuffer_tracking no longer tests sink crc. (Dhinakaran Pandiyan)
- drm_vma_limiter is no more. (Chris Wilson)
* And many other bug fixes, improvements, cleanups and new tests.
- Release 1.22 (2018-03-09)
* General changes:
- Libudev has been made a mandatory dependency. (Antonio Argenziano)
- Documentation changed to refer to the new igt-dev mailing
list. (Rhys Kidd)
* Library changes:
- Refactored timer usage for smaller code size. (Chris Wilson)
- Various fixes to support planar framebuffers. (Maarten Lankhorst)
- Added support for fetching the most recent CRC without waiting for a
vblank, along with flushing the queue of already collected
CRCs. (Maarten Lankhorst)
- Added a helper to mark BOs purgeable on vc4. (Boris Brezillon)
- Moved handling of a "cork" BO into lib from various tests.
(Daniele Ceraolo Spurio)
- Added support for looping over physical i915 engines, as opposed to
uABI engines that can alias. (Chris Wilson)
- Added an accelerated method for reading from WC buffers.
(Chris Wilson)
* Tools changes:
- Improved intel_vbt_decode output, updated the data from current
kernel. (Jani Nikula)
- intel_reg can now read/write registers using a given engine.
(Mika Kuoppala)
- Aubdump can now simulate enhanced execlist submission, for
gen11+. (Scott D Phillips)
* And many other bug fixes, improvements, cleanups and new tests.
- Release 1.21 (2018-01-16)
* Library changes:
- Added helpers for using DRM syncobj. (Jason Ekstrand)
- Refactored several i915 helpers into library functions.
(Michał Winiarski)
- Improved the GPU quiescing code to more thoroughly flush old data
and pending work. (Chris Wilson)
- Reworked DRM property handling to be more suitable for
atomic commits. (Maarten Lankhorst)
- Removed support for legacy CRC API. The generic API has been
available since kernel 4.10. (Maarten Lankhorst)
- Opening a DRM device now automatically loads its module. (Chris Wilson)
- Imported the drm-uapi headers as copies instead of using what's
installed in the system. (Eric Anholt)
- Moved the perf code to its own library from
intel-gpu-overlay. (Tvrtko Ursulin)
- Removed Android support due to lack of use and
maintenance. (Arkadiusz Hiler)
- Upgraded meson to official production status, automake is still kept
around for now.
* Tools changes:
- Improved the output of intel_vbt_decode. (Jani Nikula)
- intel_error_decode now prints user buffers if they contain debug
logs. (Chris Wilson)
- Improved the output of intel_watermark. (Ville Syrjälä,
Dhinakaran Pandiyan)
- Aubdump can now simulate execlist submission, converting from ring
buffer submission method. (Scott D Phillips)
- intel-gpu-overlay can now show data from perf PMU. (Tvrtko Ursulin,
Chris Wilson)
- intel-gpu-overlay now parses tracepoint locations from
sysfs. (Lionel Landwerlin)
* Documentation changes:
- Documentation can now be built with Meson. (Daniel Vetter)
* And many other bug fixes, improvements, cleanups and new tests.
- adjusted u_respect_cflags.diff
- fix deps for libdrm
- fix build
* add ./autogen.sh
* add --enable-gtk-doc
- Release 1.20 (2017-10-04)
* Library changes:
- Added helpers for launching external processes and capturing their
outputs. (Abdiel Janulgue)
- Increased max pipe count to 6 to support AMD GPUs. (Leo (Sunpeng) Li)
- Various improvements for Chamelium support. (Paul Kocialkowski)
- Added Coffeelake platform support. (Rodrigo Vivi, Anusha Srivatsa)
- Added Cannonlake platform support. (Rodrigo Vivi)
- Added support for audio testing. (Paul Kocialkowski)
- Added preliminary meson build system support. (Daniel Vetter, et al)
-- Autotools remains the supported build system for now.
* Tools changes:
- Refactored video bios data to use definitions copied from the
kernel. (Jani Nikula)
* Documentation changes:
- Added user and developer documentation about Chamelium support to
aid deploying the platform. (Paul Kocialkowski)
- Added documentation about the required hardware setup for audio
testing. (Paul Kocialkowski)
* Tests changes:
- Converted remaining shell-script tests to C code (Abdiel Janulgue)
- Multiple new tests.
* And many other bug fixes and improvements.
- adjusted u_respect_cflags.diff
- add Source signature file
- Release 1.19 (2017-06-09)
* Library changes:
- Changed debugfs handlers to open files for the DRM device in use,
for setups with more than one DRM device. (Tomeu Vizoso)
- Added support for 4K and audio HDMI EDID injection. (Abdiel
Janulgue, Marius Vlad)
- Added support for AMDGPU devices. (Chris Wilson)
* Tools changes:
- intel_error_decode now automatically opens a pager. (Chris Wilson)
- intel_error_decode now dumps the GuC firmware logs if available.
(Chris Wilson)
* Benchmark changes:
- gem_wsim: New benchmark that simulates command submission
workloads. (Tvrtko Ursulin)
* Scripts changes:
- trace.pl: New tool to parse i915 tracepoints for performance
analysis. (Tvrtko Ursulin)
- media-bench.pl: New tool to programmatically analyze simulated media
workloads using gem_wsim to find the optimal load balancing
strategy. (Tvrtko Ursulin)
* Test changes:
- Imported amdgpu tests from libdrm. (Chris Wilson)
- Multiple other new tests.
* And many other bug fixes and improvements.
- SLE merge
* update to latest version, Stack release 2016Q1
(fate #315643-315645, 319159-319161, 319618)
- Release 1.18 (2017-03-13)
* Library changes:
- Various changes to library functions so that they don't assume Intel
hardware. (Lyude)
- Added helper functions for managing synchronization primitives.
(Robert Foss)
- Added support for the new generic CRC capture kernel ABI. (Tomeu
Vizoso)
- Added Geminilake platform support. (Ander Conselvan de Oliveira)
- Added helpers for sysfs hotplug events. (Lyude)
- Added support for hotplug testing with the Chamelium device (Lyude)
* Tools changes:
- intel_dp_compliance: New tool for running automated DisplayPort
compliance tests. (Manasi Navare)
- Renamed intel_bios_reader to intel_vbt_decode. (Jani Nikula)
- intel_gvtg_test: New tool for setting up GVT-g guests based on
KVMGT. (Terrence Xu)
* Test changes:
- Multiple new tests.
* And many other bug fixes and improvements.
- refreshed patches: n_disable-build-of-pm_rpm.patch, u_respect_cflags.diff
- Add u_respect_cflags.diff
- supersedes N_intel-gpu-tools_Fix_libkmod.h_include_path_1320.patch,
N_intel-gpu-tools_Fix_libkmod.h_include_path_1315.patch,
N_intel-gpu-tools_Fix_libkmod.h_include_path.patch
- Release 1.17 (2016-12-02)
* Library changes:
- Added an iterator that generate primes for creating input data that
should not fall into any patterns that may be optimised by the
drivers. (Chris Wilson)
- Crashes in fixture blocks now print a stacktrace. (Marius Vlad)
- Added support for various system suspend/resume options. (Imre Deak)
- Added linked list helpers from the Wayland project. (Lyude)
- Added a generic dummy workload helper for submitting GPU workloads
that consume exactly a specified amount of time. (Abdiel Janulgue)
- Added C functions for driver loading/unloading, pkill and lsof, for
converting shell script tests to C code. (Marius Vlad)
* Tools changes:
- intel_reg: Add Kabylake support. (Jani Nikula)
- intel_bios_reader: Also dump PSR info. (Ville Syrjälä)
- intel_guc_logger: New tool for capturing logs from the GuC
firmware. (Akash Goel)
- intel_aubdump: Added commandline option to stream the dump to
another process. (Lionel Landwerlin)
- intel_aubdump: Annotate the dump with the application name and the
used PCI ID. (Jason Ekstrand)
* Benchmark changes:
- gem_latency: Added support for measuring fence wakeup latencies. (Chris Wilson)
- prime_lookup: New microbenchmark for stressing prime_fd_to_handle
and prime_handle_to_fd. (Chris Wilson)
* Test changes:
- Multiple new tests.
- Added an explicit list of tests used for Intel CI. (Petri Latvala)
- Converted multiple shell script tests to C. (Marius Vlad)
* And many other bug fixes and improvements.
- add new deps
* pkgconfig(libkmod)
* pkgconfig(libprocps)
- rebase patches
- fix libkmod.h include path
* add N_intel-gpu-tools_Fix_libkmod.h_include_path_1315.patch
* add N_intel-gpu-tools_Fix_libkmod.h_include_path_1320.patch
* add N_intel-gpu-tools_Fix_libkmod.h_include_path.patch
- Update to version 1.16
A new intel-gpu-tools quarterly release is available with the following
changes:
- Build automatically tests required when issueing a make check, Tests/subtests
that receive a crash signal should print a backtrace when i-g-t is built with
libunwind support (Marius Vlad)
- lib/igt_kms: Force connector probing on first use (Chris Wilson)
- vc4: Add a test for BO lookup failure error path (Eric Anholt)
- tests/gem_mocs_settings: Remove direct register tests,
and added RC6 tests (Peter Antoine)
- Check for libdrm_intel and build if present, Add stubs for intel_bufmgr
(Robert Foss)
- igt/gem_mmap_gtt: Add a test to detect non-WC access (Chris Wilson)
- Various documentation improvements (Daniel Vetter)
- Added new tests: tests/kms_rmfb and tests/kms_atomic_transition, a test for
fastboot, tests/kms_panel_fitting, and a test that only tries to set the
current property values back, tests/kms_properties. Various improvements to
tests/kms_cursor_legacy (Maarten Lankhorst)
- lib/igt_kms: Use pipes for committing, not outputs and assign pipe properties
in pipe init and many other improvements (Maarten Lankhorst)
- tests/gem_workarounds: read test added as a basic test, fix assertion of num
of regs (Mika Kuoppala)
- Various improvements to tools/intel_bios_reader and tools/intel_reg (Ville
Syrj�l�)
- lib: Add x86 cpuid based feature detection (Chris Wilson)
- demos/intel_sprite_on: Instead of looping until the first disconnected port
is found, now go through all possible connectors, drawing the sprite on any
connected display. (Jim Bride)
- Multiple improvements to lib/igt_kms (Robert Foss)
- lib/igt_aux: Framework for measuring latency in raising signals (Chris
Wilson)
- Various modifications to intel_chipset: Replace lookup of GT size with
computation, remove unused PCI_CHIP ids, converting platforms names using
device info (Chris Wilson)
- tests/kms_chv_cursor_fail: Run the tests with fewer steps
(Maarten Lankhorst)
- lib/intel_chipset: Add more Kabylake PCI IDs and removed PCI IDs that are no
longer listed as Kabylake (Rodrigo Vivi)
- Basic framework for GVT-g testing has landed (Chris Wilson)
- Various improvements to tests/kms_flip (Ville Syrj�l�)
- igt/kms_cursor_legacy: Add a rudimentary test to detect stalled cursors,
detect pageflip errors and check that cursor updates do not stall flips
(Chris Wilson)
- vGEM support: lib and added tests/vgem_basic, tests/vgem_slow and
tests/vgem_reload_basic (Chris Wilson)
- Various fixes to tests/kms_frontbuffer_tracking: prefer BLT drawing, recreate
FBS at every subtest and properly handle mixing GTT and WC mmaps (Paulo Zanoni)
- Replace drv_missed_irq_hang script with a C-equivalent: tests/drv_missed_irq
(Chris Wilson)
- Added a test case for polling dma-buf fences: tests/prime_busy (Chris Wilson)
- lib/igt_gt: Omit illegal instruction on gen8+ and time
constrains on hang detection (igt/gem_reset_stats) (Mika Kuoppala)
- Added tests/kms_invalid_dotclock, a test that makes sure every modeset gets
rejected by the kernel if the requested dotclock is beyond the hardware
capabilities (Ville Syrj�l�)
- tests/gem_stolen: Verify contents of stolen-backed objects across
hibernation, fix for no_mmap subtest and check for available stolen memory size
(Ankitprasad Sharma)
- tests/core_prop_blob: Add invalid tests to set fb props (Daniel Vetter)
- Many more fixes and improvements.
Update to version 1.15
- New KMS test: tests/kms_cursor_legacy (Stress legacy cursor ioctl)
(Chris Wilson)
- Several GEM tests have been removed from BAT: tests/gem_exec_whisper,
tests/gem_sync (dropped individual engines), test/gem_cs_prefetch (replaced
by test/gem_exec_gttfill), tests/gem_ctx_param_basic (got relabeled
to tests/gem_ctx_param) (Chris Wilson)
- build: Skip configure step if is NOCONFIGURE set (Tomeu Vizoso)
- tools/intel_bios_reader: Added options for dumping individual panels, specific
section, hex format and other various fixes (Jani Nikula)
- build: Add optional --enable-werror
(hard-fail in case of compiler warnings) (Marius Vlad)
- New KMS test: tests/prime_mmap_kms (show case dma-buf new API
and processes restrictions) (Tiago Vignatti)
- Several tests have gained to ability to be run on different platforms
than Intel: tests/testdisplay (Tomeu Vizoso), tests/kms_panel_fitting
(Robert Foss), tests/kms_flip_event_leak, tests/kms_flip (Tomeu Vizoso).
- compute exitcode first: In the case of running multiple subtests which all
happen to be skipped, igt_exitcode is 0, but the final exit code will be 77.
(Chris Wilson)
- Shorten tests/kms_flip test (Tvrtko Ursulin)
- Half the timeout for suspend to RAM and a third for suspend to disk
(Marius Vlad)
- lib: Pass format instead of bpp to create_bo_for_fb (Ville Syrjälä)
- Removed from tests/test-list.txt, tests/gem_concurrent_all and added
tests/test-list-full.txt that contains all the tests. This will speed
up considerably piglit when starting tests. (Gabriel Feceoru)
- piglit changed its behaviour to prevent overwriting the results. A fairly new
version of piglit is required to run i-g-t tests. (Gabriel Feceoru)
- lib: Replace drmIoctl() with a layer of indirection (Chris Wilson)
- Adding missing Broxton PCI IDs (Rodrigo Vivi)
- Added COMMIT_ATOMIC (lib/igt_kms, w/ tests/kms_rotation_crc).
Requires nuclear_pageflip parameter turned on in the i915 driver.
(Mayuresh Gharpure, Pratik Vishwakarma)
- man/: rewrite manual pages in reStructuredText (Jani Nikula)
- tests/drv_module_reload_basic: perform fault injection (Chris Wilson)
with various improvements (Imre Deak)
- Removed tests/gem_multi_bsd_sync_loop which was superseded by
tests/gem_ring_sync_loop and tests/gem_dummy_reloc_loop by
tests/gem_exec_reloc (Chris Wilson)
- New GEM tests: tests/gem_exec_whisper, tests/gem_exec_store,
test/gem_exec_gttfill, tests/gem_exec_suspend, tests/gem_exec_flush
(Chris Wilson)
- New benchmarks: benchmarks/gem_syslatency, benchmarks/gem_exec_fault
(Chris Wilson)
- tests/gem_exec_nop included in BAT (Chris Wilson)
- tests/pm_rpm: Fix crash on machines that lack LLC (David Weinehall)
- lib/igt_fb: Fix domain tracking for GTT cairo surfaces (Chris Wilson)
- Add igt_subtest_group to allow igt_fixture for only a subset of subtests
without skipping/failing all subsequent subtests. (Daniel Vetter)
- Many more fixes and improvements.
Added python3-docutils to BuildRequires, since manual pages are now built
via rst2man.
- Update to version 1.14
* New test: gem_create validate parameters for GEM_CREATE ioctl
(Ankitprasad Sharma)
* New test: gem_softpin exercise the userptr ioctl to create shared
buffers between CPU and GPU (Vinay Belgaumkar)
* New tests: prime_mmap_coherency/kms_mmap_write_crc cache coherency
tests (Tiago Vignatti)
* New test: prime_mmap mmap() on dma-buf fds (Rob Bradford)
* New test: gem_exec_reloc sanity check of execbuf-ioctl relocations (Chris
Wilson)
* New test: gem_exec_basic sanity check of execbuf-ioctl rings (Chris Wilson)
* improved igt_hang_ring() infrastructure for generic hang injection support
in the core library (Chris Wilson)
* new igt_pm library to collect power management testing helpers (David
Weinehall)
* lig/igt_vc4: VC4 support library (Eric Anholt)
* kms_frontbuffer_tracking: included in BAT (Paulo Zanoni)
* kms_psr_sink_crc: Add BAT test for PSR active (Rodrigo Vivi)
* gem_wait: test superseded by gem_latency in benchmarks (Chris Wilson)
* igt_core: Fix logging to display extended line (Derek Morton)
* igt_core: Expand --run-subtest functionality (Derek Morton)
* kms_force_connector_basic: various fixes and included in BAT set (Daniel
Vetter)
* Many other improvements and bug fixes.
- Update to version 1.13:
+ New tests:
- kms_atomic tests atomic mode setting.
- core_prop_blob tests blob properties.
- gem_request_retire targets request retirement code paths.
- core_setmaster_vs_auth checks that drop/setMaster correctly
transfer master state.
+ Wildcard characters are now accepted when using the
--run-subtest command line option to specify multiple subtests
to run.
+ Add support for Broxton in intel_audio_dump.
+ Added Kabylake support.
+ Many other bug fixes and improvements.
- Add pkgconfig(libudev) and pkgconfig(xrandr) BuildRequires,
configure looks for them so lets build with those supported too.
- intel-gpu-tools 1.12
- Various new tests and tools
- New statistical analysis functions. (Damien Lespiau)
- New benchmark tests. (Chris Wilson)
- Old register tools that were superseded by intel_reg have been removed.
- Various tests have been marked "basic", to indicate they are suitable for
use in basic acceptance testing. (Jesse Barnes)
- Per-ring gem_storedw_loop tests combined into a single test with subtests.
(Jesse Barnes)
- New "aubdump" tool, used to launch an application and capture rendering to
an AUB file. (Kristian Høgsberg Kristensen)
- Cherryview support added to intel_display_poller. (Ville Syrjälä)
- Skylake and Broadwell support added to gem_gpgpu_fill tests.
(Dominik Zeromski)
- Support for running core drm tests on any platform. (Micah Fedke)
- Many other bug fixes
- supersedes patch 'u_build-fixes.patch"
- use correct filelist macros
- Update to version 1.11
* Various new tests and tools
* Single combined test list (supported by piglit since commit 8a122bb)
* Optional dependency on libunwind to provide automatic stack traces on test
failures. (Thomas Wood)
* Add optional default debug and optimisation flags for tests to enable better
stack traces and debugging. (Thomas Wood)
* Test programs are now installed into libexec. This is useful when building a
complete software stack for a DUT from scratch. (Building and installing
tests can still be disabled by the --disable-tests configure flag.)
(Joonas Lahtinen)
* New tool to decode watermark registers (Ville Syrjälä)
* Timeout mechanism now reports test as failed
* Introduce intel_reg as the one Intel graphics register multitool to replace
intel_reg_read, intel_reg_write, intel_iosf_sb_read, intel_iosf_sb_write,
intel_vga_read, intel_vga_write, intel_reg_dumper, intel_reg_snapshot,
and quick_dump.py. (Jani Nikula)
* Add functions to manipulate i915.ko parameters and ensure features are enabled
for testing. (Paulo Zanoni)
- supersedes u_Fix-pointer-cast-in-order-to-fix-build-on-32bit-arch.patch
- added new buildrequires to gtk-doc and libunwind
- added /usr/lib/intel-gpu-tools/* and /usr/share/intel-gpu-tools/* to filelist
- u_Fix-pointer-cast-in-order-to-fix-build-on-32bit-arch.patch
* fixes build on 32bit
- Update to version 1.10
* New frequency manipulation tool (intel_gpu_frequency)
* Adjustments for the Solaris port (Alan Coopersmith).
* Remove tests/NAMING-CONVENTION since it's all in the docbook now,
to avoid divergent conventions.
* New CRITICAL log level for really serious stuff (Thomas Wood).
* Interactive test mode can now be enabled by the shared cmdline
option --interactive-debug=$var (Rodrigo Vivi).
* Improved logging to kmsg to better line up test runs with kernel
messages (Chris Wilson).
* Record all log levels (including disabled levels) in a ringbuffer
and dump that on test failures for quicker diagnostics of automated
test run results (Thomas Wood).
* A lot of small polish all over the test library.
* Piles of new testcases and improvements to existing ones as usual.
- reenabled post build checks
- u_build-fixes.patch
* fix post build checks
- Update to version 1.9:
+ Patches refactored for new sources
+ post-build-checks disabled, due to check failure:
I: Program returns random data in a function
E: intel-gpu-tools no-return-in-nonvoid-function
intel_renderstate_gen8.c:441
+ Dropped:
- n_missing_check-ndebug.h.patch
- intel-gpu-tools-1.7.tar.bz2
+ Added:
- intel-gpu-tools-1.9.tar.bz2
+ Changes from version 1.7
- More Android porting
- Fixes to documentation warnings
- Updates to UPDATE, MAINTAINERS, and README
- lib:
- Fix out of tree build of version.h
- added function to lock memory into RAM
- add option log domain filtering
- introduce log domains
- igt_debugfs: Don't setup crc in _new
- igt_debugfs: Throw away the two first CRCs
- igt.cocci: Deal with min/max/swap
- add swap() macro
- always reset connectors after the state is forced
- remove igt_edid.h
- tests:
- gem_tiled_swapping: use igt_info logging wrapper
- replaced 3D test images
- kms_cursor_crc: Restore the valid pipe/connector combo check
- kms_mmio_vs_cs_flip: Count valid tests for all crtcs
- kms_flip:
* Target the back buffer with the dummy load
* Calibrate the dummy load delay in kms_flip
* Use fixed size (2kx2k) buffers for dummy load
* Refactor blit code
- Run lib/igt.cocci
- pm_rps: vlv:
* roundmiddle point to freq supported by HW
* load gpu for idle min/max tests\
* wait for freq to settleo
- add gem_gpgpu_fill to .gitignore
- use base edid
- tools:
- add missing copyright headers
- terminate getopt_long long option arrays properly
- drv_hangman: Remove unused function
- kms_cursor_crc: Remove value to 'return' in a void function
- igt/drm_read: Require that pipe 0 is active
- igt/drm_read: Abuse read(drm)
- intel_error_decode: Decode the ERROR register on Sandybridge
and Ivybridge
- gem_bad_reloc: Don't flip-flop between SKIP and PASS
- rename intel-gpu-tools-1.7-fix-bashisms.patch to
u_intel-gpu-tools-1.7-fix-bashisms.patch according to our patch
guidelines
- fix bashism in intel_gpu_abrt script that uses bash-specific
constructions
- add patches:
* intel-gpu-tools-1.7-fix-bashisms.patch
- update to release 1.7; Here goes a new i-g-t quarterly release
with the following changes:
* Piles of API documentation for the core i-g-t testing libraries.
* Improved igt loggin, now also with igt_vlog (for va_args printf-style
logging).
* Polish for the igt_debugfs library.
* Split out igt_fb library from igt_kms, cleanup of the igt_kms functions.
* Android porting patches (Tim Gore, Tvrtko Ursulin).
* Piles more tests as usual.
* Support for building libcairo based tests on Android. Set ANDROID_HAS_CAIRO=1
in the build enviroment when you have this (Tim Gore).
* Timeout support in igt_aux, see igt_set_timeout (Thomas).
* Documentation for the testrunner interface like exit codes, subtest
enumeration and log output. Should help other people to run the tests in their own framework.
* Make swig an optional dependency (Damien).
* Helpers for runtime pm tests in igt_aux.
- rename n_disable-build-of-pm_pc8.patch to n_disable-build-of-pm_rpm.patch,
since test has been renamed
- update to release 1.6
* Changes to support Broadwell in the test suite. (Ben, Damien, et al.)
* Updated (now working again!) Android support from Oscar Mateo.
* Test coverage through i-g-t is now officially an integral part of any drm/i915
feature work and also for bugfixes. For more details see:
http://blog.ffwll.ch/2013/11/testing-requirements-for-drmi915.html
* Fix the gen4asm build depency handling, now that the assembler is included in
i-g-t (Ben).
* Improve the cairo object lifetime management of the kmstest helpers (Chris).
* Allow register access to succeed if i915 is loaded but debugfs isn't found
(i.e. nomodeset is used)
* New kernel modesetting helper library for simpler testcases (Damien).
* New structure logging support for tests. Message at the WARN level be
reflected in the piglit result, also included igt_warn_on macros to simplify
test asserts which should just result in warnings, but not in a test abort.
* Broadwell support for intel_audio_dump (Mengdong Lin).
* API documentation support (Thomas)
- n_missing_check-ndebug.h.patch
* added missing include file in order to fix build
- refreshed n_disable-build-of-pm_pc8.patch
- added missing pkgconfig(dri2proto)
- added missing LICENSE file
- update to release 1.5
- n_disable-build-of-pm_pc8.patch
* disables build for pm_pc8 test app for now
- removed obsolete patches
* intel-gpu-tools-no-test.diff
* u_intel-gpu-tools-no_m4_dir.patch
- renamed latest patch according to our policy
- Removed AC_CONFIG_MACRO_DIR([m4]) from configure.ac to fix
build with new automake
- Update to version 1.3:
New intel-gpu-tools release with too much stuff changed. Biggest part is
improvements to the testsuit, but also some other neat things:
+ dpf tool for handling l3 remapping on gen7
+ robustify against wc gtt mappings
+ improvements to the reg_dumper and register read/write tools
+ haswell support
- Packaging changes:
+ Added cairo to BuildRequires (we need this now)
+ changed intel-gpu-tools-no-test.diff to speed up compilation
- change it to exclusivearch, as it also does not exist on ARM
- exclude ppc, ppc64. There is no intel graphic
- updated to version 1.2:
support for recent Intel graphic chips, many fixes
See ChangeLog for details
- Don't build test directory (to simplify the packaging)
- Split intel-gpu-tools from xorg-x11-driver-video.
Initial version: 1.0.2-20101210-292ae45.