- update to 2.14.0
   Features:
    * Support monochrome bar type
    * Apply default color palettes in --file and --data (Logo)
    * Support named variable placeholders in custom module formattion string
     - --title-format '{user-name-colored}{at-symbol-colored}{host-name-colored}'
       is equivalent to --title-format '{6}{7}{8}'
    * Support named color placeholders in custom module formattion string
     - --<module>-format '{#red}' is equivalent to --<module>-format '{#31}'
     - '{#red}' or '{#31}' is preferred over \u001b[31m because is more readable
       and --pipe aware (will be ignored in pipe mode)
     - Supported in Custom module too
     - See fastfetch -h format for detail
    * Add new module InitSystem, which detects the name of init system
     - i.e. process name of pid1. init, systemd, etc
    * Add option --color-separator to set the color of key-value separators
    * Print error reason when vulkan init fails (Vulkan)
   Bugfixes:
    * Don't detect .conf files in --list-config-paths
    * Fix outputColor doesn't work if module keys are disabled

• Files Changed
• Browse Source

- update to 2.13.2:
   Bugfixes:
    - Remove DRM driver version detection feature,
      which caused a performance regression for nouveau drivers (Display, Linux)
    - Don't use *-unknown as display name for Wayland protocol (Display, Linux)
   Features:
    - Add new module Editor which prints editor settings, i.e. $VISUAL or $EDITOR

• Files Changed
• Browse Source

- update to 2.13.1:
   Changes:
    * The long deprecated flag based config files are removed.
     - They can still be used with xargs fastfetch < /path/to/config.conf
     - --gen-config can be used to migrate them to json based config files
    * The long deprecated options --set and --set-keyless are removed.
    * Kernel module now prints kernel name by default
   Features:
    * Support st terminal font detection for font configuration compiled in st binary (TerminalFont, Linux)
    * Add option --color-output to change output color of all modules except Title, Separator
        display.color.output in JSONC config file
    * Add option --<module>-output-color to change output color of one specified module,
      which overrides the global option --color-output
    * Add option --publicip-ipv6 to print IPv6 address (PublicIP)
    * Add new module Loadavg to print load averages (Loadavg)
    * Add new module PhysicalMemory to print information of physical memory devices (PhysicalMemory)
        Requires root permission to work on Linux and FreeBSD
    * Support specifying --logo-width only for --kitty-direct and --iterm (Logo)
    * Add option --localip-show-all-ips to show all IPs assigned to the same interface (LocalIP)
        Default to false
    * Add --cpu-show-pe-core-count to detect and display core count for performance / efficiency cores (CPU)
    * Add new module Bootmgr which prints information of stage 2 bootloader (grub, system-boot, etc)
     - Requires booting in UEFI mode
    * Detect core count for performance / efficiency cores (CPU)
     - Test it with fastfetch --cpu-show-pe-core-count
    * Detect DRM driver version if DRM detection method is used (GPU, Linux)
   Bugfixes:
    * Rename option --temperature-unit to --temp-unit as documented in help messages
    * Fix alternate logo doesn't work with { "type": "builtin" } (Logo)
    * Don't detect clifm and valgrind as a terminal (Terminal, Linux)

• Files Changed
• Browse Source

Automatic submission by obs-autosubmit

• Files Changed
• Browse Source

- update to 2.11.0:
  Changes:
    - Default hideCursor to false. It doesn't make much difference
      but makes user's terminal unusable if fastfetch is not exited correctly.
  Bugfixes:
    - Fix minimum cmake version support
    - Fix wifi detection on platforms that don't use NetworkManager
    - Fix GPU type detection for AMD cards
  Features:
    - Add basic support DE detection support for UKUI (DE, Linux)
    - Make config specified in JSONC overridable by command line flags
     * Note this change only make global config overridable; module configs are still not
    - Suggest increasing --processing-timeout when child process timeouts
    - Only detect folders that specified by --disk-folders
     * Previously --disk-folders only omits unmatched disks from output.
       This option can be used to improve detection performance by ignoring slow network drives

• Files Changed
• Browse Source

- update to 2.10.2:
  Changes:
    * We now always detect max frequency of GPUs for consistent, instead of current frequency
  Features:
    * Improve display detection for wlroots based WMs. Fastfetch now correctly reports fractional scale factors in hyprland (Display, Linux)
    * Improve GPU detection on Linux (GPU, Linux)
        - Support GPU memory usage detection for AMD GPUs
        - Support GPU frequency detection for Intel GPUs
    * Improve performance of Gnome version detection (DE, Linux)
    * Improve performance of kitty version detection (Terminal, Linux)
    * Detect refresh rate when using --ds-force-drm sysfs-only (Display, Linux)
    * Add option --ts-version to disable terminal and shell version detection. Mainly for benchmarking purposes
    * Improve performance of detecting WSL version (Host, Linux)
  Bugfixes:
    * Correctly detect /bin/sh as current shell if it's used as default shell (Shell, Linux)
    * Work around an issue which CPU module reports incorrect CPU frequency that is too high (CPU, Linux)
    * Don't print ANSI escape codes in --pipe mode

• Files Changed
• Browse Source

- update to 2.9.2:
  Changes:
    * To make use of the newly introduced `yyjson` flag `YYJSON_WRITE_NEWLINE_AT_END`, fastfetch now requires `yyjson` 0.9.0 or later
  Features:
    * Always add a final new-line when generating JSON output
    * Detect partition create time, which can be used as OS installation time (Disk)
    * Print time string when generating JSON result instead of UNIX epoch time number, which is more human-readable
  Bugfixes:
    * Fix a memory leak
    * Fix parsing of option `--packages-disabled` (Packages)
    * Don't use command `time` as a shell (Shell)
  Logos:
    * Add openSUSE MicroOS
    * Fix color of AOSC OS

• Files Changed
• Browse Source

• Files Changed
• Browse Source

- update to 2.9.0:
  Features:
    * Support Lxterminal version detection (Terminal, Linux)
    * Support weston-terminal version and font detection (TerminalFont, Linux)
    * Support am package manager detection (Packages, Linux)
    * Support network prefix length detection for IPv6 (LocalIP)
    * Display all IPs when multiple IPs are assigned to the same interface (LocalIP)
    * Add option --localip-show-prefix-len to show network prefix length for both IPv4 and IPv6. Defaults to true (LocalIP)
  Bugfixes:
    * Fix network prefix length detection when the value is greater than 24 (LocalIP, Linux)
    * For xfce4-terminal, use system mono font if no config file is found (TerminalFont, Linux)

• Files Changed
• Browse Source

- update to 2.8.10:
  Bugfixes:
    * Ignore chezmoi (Terminal, Linux)
    * Trim trailing possible whitespaces (PublicIP)
    * Fix detection compatibility for KDE 6 (Font, Linux)
  Features:
    * Improve stability; print more useful error message; avoid misuse (PublicIP / Weather)

• Files Changed
• Browse Source

- update to version 2.8.9:
  Bugfixes:
    * Don't detect SessionLeader as terminal, actually (Terminal, Linux)
    * Fix blurry chafa result when specifying both width and height (Logo)
  Features:
    * Distinguish min frequency and base frequency (CPU)

• Files Changed
• Browse Source

- update to version 2.8.8:
  Bugfixes:
    * Fix old fish version compatibility
    * Fix truncated texts in --help format
    * Fix old vulkan-header and libdrm library compatibility (Linux)
    * Fix possible segfaults in --help *-format
    * Fix invalid resolution detection when using libdrm (Linux, Display)
    * Fix segfault when /sys/devices/system/cpu/cpufreq/ doesn't exist (CPU, Linux)
    * Don't detect SessionLeader as terminal (Terminal, Linux)
    * Fix detection of client IP (Users, Linux)

• Files Changed
• Browse Source

- update to version 2.8.7:
  Bugfixes:
    * Fix max CPU frequency detection for some cases (CPU, Linux)
    * Fix some memory leaks
    * Fix ddcutil 2.1 compatibility (Brightness, Linux)
  Features:
    * Support zellij version detection (Linux, Terminal)

• Files Changed
• Browse Source

- update to version 2.8.6:
  Changes:
    * Due to newly introduced configs, JSONC option { "temperatureUnit": "C" } has been changed to { "temp": { "unit": "C" } }
  Bugfixes:
    * Fix incorrect GPU name detection for Intel iGPU on Linux (GPU, Linux)
  Features:
    * Support additional temperature formatting options
        { "temp": { "ndigits": 1 } }
        { "temp": { "color": { "green": "green", "yellow": "yellow", "red": "red" } } }
    * Support specifying custom pci.ids path for Linux (GPU, Linux)
    * Support warp-linux terminal version & terminal font detection (Terminal, Linux)

• Files Changed
• Browse Source

- update to version 2.8.5:
  Bugfixes:
    * Fix segfault if we fail to find Vendor ID in lscpu (CPU, Linux)
    * Fix multi-device bcachefs filesystem compatibility (Disk, Linux)
  Features:
    * Support --color-block-width and --color-block-range (Colors)
    * Support --diskio-detect-total to show total bytes read/written (DiskIO)
    * Support --netio-detect-total to show total bytes received/sent (NetIO)
    * Support --packages-disabled to disable specified package manager (Packages)
    * Support --display-order to sort multiple displays in a specific order (Display)
    * Support --display-compact-type original-with-refresh-rate to show refresh rates in compact / oneline mode (Display)

• Files Changed
• Browse Source

- update to version 2.8.3:
  Bugfixes:
    * Fix GPU name detection for AMD graphic cards (GPU, Linux / FreeBSD)

  Bugfixes:

• Files Changed
• Browse Source

- update to version 2.8.0:
  Features:
    * Rewrite GPU module, drop libpci dependency (GPU, Linux)
    * Detect marketing name of Apple Silicon CPUs for asahi linux (CPU, Linux)
    * Add new module Camera, which prints the name and resolution of connected cameras
Bugfixes:
    * Fix compatibility with packages installed by flatpak (Terminal, Linux)
    * Don't show not connected if no power adapter is found (macOS / Linux, PowerAdapter)
    * Make format of battery status be consistent with other platforms (Linux, Battery)

• Files Changed
• Browse Source

- update to version 2.7.1:
  Features:
    * Config presets in app folder now work with symlinks
  Bugfixes:
    * Fix a possible segfault when detecting terminal (Terminal, Linux)

• Files Changed
• Browse Source

• Files Changed
• Browse Source

- update to version 2.4.0:
  **BREAKING** 
  We are deprecating flags based config files (will be removed in v3.0.0). 
  We suggest you migrate to json based config files. 
  One may use `-c /path/to/config.conf --gen-config` to migrate existing flag 
  based config files.
  Changes:
    * All flag based presets are removed
  Features:
    * Improve performance of detecting rpm and pkg package count (Packages, Linux / FreeBSD)
    * Support Apple M3X temperature detection (CPU / GPU, macOS)
    * `--ds-force-drm` support a new option `sysfs-only`
    * Improve xfce4 version detection
    * Detect WM and DE by enumerating running processes (WM / DE, FreeBSD)
    * Add a new module `Physical Disk`, which detects product name, full size, serial number and so on.
  Bugfixes:
    * Fix crashes sometimes when `--logo-padding-top` is not set (Logo)
    * Fix memory usage counting algorithm (Memory, macOS)
    * Fix the behavior of `--no-buffer` in Windows
    * Fix possible segfault in some devices (Display, Linux)
    * Fix segfaults on first use of new images with Sixel flag (Image) 
- update specfile:
  * add bash completion subpackage.
  * add fish completion subpackage.
  * add manpage for fastfetch for package.

• Files Changed
• Browse Source