- Update to opensbi 1.4
  * Synopsys DesignWare APB GPIO driver
  * Zicntr and Zihpm support
  * Console print improvements
  * Smepmp support
  * Simple FDT based syscon regmap driver
  * Syscon based reboot and poweroff driver
  * Non-contiguous hpm counters
  * Smcntrpmf support
  * Full sparse hartid support
  * IPI improvements
  * RFENCE improvements
  * Zkr support
  * Andes custom PMU support (forwarded request 1135365 from Andreas_Schwab)

• Files Changed
• Browse Source

- Update to opensbi 1.3.1
  * ACLINT driver fix for disabled CPUs
  * SBI PMU fix for out-of-bound access
  * Designware GPIO driver (forwarded request 1099547 from Andreas_Schwab)

• Files Changed
• Browse Source

- Update to opensbi 1.3
  * Allow platform to influence cold boot HART selection
  * Starfive JH7110 platform support
  * Split RX and RW firmware regions
  * Advertise nonretentive suspend for allwinner D1 platform
  * Byteorder/endianness conversion macros
  * SBI debug console extension (Experimental)
  * Configure the PMA regions for RZ/Five platform
  * SBI system suspend extension (Experimental)
  * SBI PMU platform firmware events (Experimental)
  * SBI CPPC extension (Experimental)
  * Optimized remote TLB flushes
  * Simple heap for boot time memory allocations
  * Bring back no-map DT property for reserved memory nodes (forwarded request 1095418 from Andreas_Schwab)

• Files Changed
• Browse Source

- Update to opensbi 1.2
  * RISC-V AIA v1.0.0 support
  * Cadence UART driver
  * Platform specific PMU device operations
  * Trap handling improvements for platforms with H-extension
  * Semihosting support
  * T-HEAD C9XX PMU and CLINT support
  * FDT based drivers for Andes AE350 platform
  * Andes AE350 platform improvements
  * Allow enabling/disabling of SBI extensions via Kconfig
  * Renesas SCIF serial driver
  * Renesas RZ/Five platform support (forwarded request 1045227 from Andreas_Schwab)

• Files Changed
• Browse Source

- Update to opensbi 1.1
  * SBI PMU improvements
  * RISC-V AIA v0.3.0 draft support
  * Simple external interrupt handling framework
  * Xilinx UART-Lite driver
  * RISC-V privilege specification v1.12 support
  * RISC-V Svpbmt extension support
  * RISC-V Smstateen extension support
  * RISC-V Sstc extension support
  * RISC-V privilege specification version detection
  * Platform callback to populate HART extensions
  * Compile time C arrays support
  * Probing FDT based drivers using compile time C arrays
  * SBI HSM improvements
  * Allwinner D1 platform support
  * Trap redirection improvements related to [m|h]tinst CSR
  * SBI v1.0 specification support

• Files Changed
• Browse Source

- Update to opensbi 1.0
  * SBI HSM suspend as defined by SBI v0.3 specification
  * Position independent execution for firmware
  * Ticket based spinlocks
  * Simplified / reduced platform callbacks
  * ACLINT MTIMER and MSWI support
  * SBI PMU extension as defined by SBI v0.3 specification
  * Simple FDT based GPIO driver framework
  * Improved reset driver framework along with various reset drivers
  * Generic timer delay loop APIs
  * RISC-V Sscofpmf extension support
  * Simple FDT based I2C driver framework along with SiFive I2C driver
  * UART drivers for Gaisler and LiteX platforms (forwarded request 942351 from Andreas_Schwab)

• Files Changed
• Browse Source

- Drop sifivefu540 flavor (forwarded request 911068 from Andreas_Schwab)

• Files Changed
• Browse Source

- Update to opensbi 0.9
  * Optimized trap handler for both RV32 and RV64
  * Domain support for system-level partitioning
  * Device tree based domain configuration
  * SBI v0.3 SRST extension
  * More detailed boot-time prints (forwarded request 864141 from Andreas_Schwab)

• Files Changed
• Browse Source

- Package generic fw_dynamic firmware (forwarded request 862651 from Andreas_Schwab)

• Files Changed
• Browse Source

- Update to opensbi 0.8
  * Simple FDT timer driver framework
  * Simple FDT ipi driver framework
  * Simple FDT irqchip driver framework
  * Simple FDT serial framework
  * Generic FDT based platform support
  * Nuclei UX600 platform support
  * Detect HART CSRs at boot time
  * Multi-PLIC support
  * Multi-CLINT support
  * Allow multiple builtin DTBs
  * Hypervisor v0.6.1 specification support
  * Shakti C-class platform support (forwarded request 816147 from Andreas_Schwab)

• Files Changed
• Browse Source

- Update to opensbi 0.6
  * drop qemu/sifive_u platform
- align.patch: removed (forwarded request 778750 from Andreas_Schwab)

• Files Changed
• Browse Source

• Browse Source