baserev update by copy to link target

• Files Changed
• Browse Source

- Update to 3.2.0:
  * Added extra diagnostics to printcal.
  * Added colprof -nI option, that adds inverse gamut mapping to Perceptual and
    Saturation A2B tables, if they are being created. This is not recommended for
    source profiles, since it handicaps true gamut mapping, but may be a workaround
    to faulty Adobe Lightroom BPC for Perceptual intent in output profiles.
  * Added error message for ColorMunki spectro sensor internal cable being
    disconnected.
  * Fixed bug in Appearance B2A conversion that appeared in V3.0 release.
  * Fixed crash in chartread strip reading when given faulty .ti2 file.
  * Tweaked i1d3 AIO adaptive integration time to reduce measure time to be more
    comparable to just using Rev A commands.
  * Re-worked ARGYLL_NOT_INTERACTIVE stdin to work much better on MSWin when
    connected to a pipe. Removed code that empties stdin before expecting use input
    when ARGYLL_NOT_INTERACTIVE.
  * Fixed OS X dispwin -c etc.
  * Fixed colprof IGNORE_DISP_ZEROS heuristic so that it doesn't reject OLED red
    measurements that have a Z value of 0.0.
  * Added -H option to colprof to allow setting the charTargetTag to given string,
    rather than automatically filling with .ti3 data.
  * Changed instrument monitoring thread debug messages to only be shown on -D9, so
    they don't interfere with messages shown at -D8.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

Fix wrong bugzilla reference

• Files Changed
• Browse Source

- Fix build with gcc14 (bsc#1221304)
  * Add ajam-gcc14.patch
- Reformat ajam-include.patch with a/b prefixes
- Use %autosetup

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

Prepare for RPM 4.20

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 3.1.0:
  * Fixed bug in CMYK profile B2A table creation that sometimes resulted in
    bumpy black generation. (Only occurred when compiled using recent gcc with
    code optimization.)
  * Changed ICC profile serialization of pure ASCII text tags emit a warning
    rather than error if they are fed non-ASCII utf8 input.
  * Made ICC code a little more robust against bad profiles. (Thanks to David Hoyt).
  * Fixed latent bug in X11 plot code that caused window not to be created or
    updated when dowait == 0. This shows up on Linux as failure of spotread -S
    to show spectral plot.
  * Fixed problem with colorhug not noticing errors from the instrument.
  * Updated scanin/it8Wolf.cht to improve accuracy of grey wedge patch recognition.
  * Merged some Debian patches, including spelling fixes.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 3.0.2:
  * Fix #include <ctype.h> in spectro/conv.c
  * Fix typo introduced into spectro/i1d3.c that prevents
    retail i1d3 from working.
  * Fixed accuracy problem with xicclu -fb when using cLut type
    profiles that use a matrix in their B2A table.
  * Fixed crash in xicclu with device link profiles.
  * Fixed error when creating profiles with
    ARGYLL_CREATE_DISPLAY_PROFILE_WITH_CHAD or
    ARGYLL_CREATE_OUTPUT_PROFILE_WITH_CHAD.
  * Make re-writing an ICC profile more forgiving of
    tags that are incorrect for the profile version.
  * Fixed problem with writing textDescriptionType
    ScriptCode that was not being padded to 67 characters.
  * Fixed bug in CGATS output. This showed up in oeminst.

  * Changed i1d3 driver to cope with Rev. B "0x83" error robustly. This should
  * Fixed possible crashes in xicc/ccss.c and spectro/oeminst.c
* Fix SpyderX faulty initial black calibration
    L* 1 and 99 are not rounded.
- Remove obsolete patch argyllcms-decl.patch
  * Fix oeminst for OS X Spyder 4 CD calibration file location.
  * Fixed USB problem with i1pro (Rev B & D ?), where communications
  * Added workaround for i1d3 Rev. B status code 0x83 on very low
  * Fixed bug in Klein K10 driver - adaptive measurement wasn't properly
  * Improved Klein K10 driver to be more robust when lights off command
    returns bogus error codes, or causes a cascade of bogus measurement
  * Added maximum sensor frequency check for Spyder & i1d3 drivers,
    being read, nor allows bi-directional strip reading, if "printtarg -r"
    was used. A warning will be issued if "printtarg -r" was used, and

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to 3.0.0:
  * Updated ccast/axTLS to get ChromCast working again with latest Google CC
    operating software.
  * Extensive re-write/re-factor of icclib to make it more future-proof.
    See https://www.argyllcms.com/doc/ChangesSummary.html for details.
  * Added ref/ColorCheckerPassport.ti2 and ref/ColorCheckerHalfPassport.ti2
    to allow measuring ColorCheckerPassport with instrument.
  * Fixed bug in Munki spectro hi-res mode with some instruments. Luminance
    matching between normal and hi-res was sometimes quite poor.
  * Added ARGYLL_CREATE_DISPLAY_PROFILE_WITHOUT_CHAD environment variable.
  * Changed colprof -U flag to -u. Changed dispcal -J flag to -K to accommodate
    a potential new flag for colprof and dispcal.
  * Added workaround for bug in madHcNet64.dll32/64.dll which sometimes causes
    failure.
  * Added delay after USB set_config on OS X to help Spyder 3/4 on Ventura OS.
  * Added -Y parameter to dispwin to override automatic patch delay.
  * Changed i1d3 driver to cope with Rev. B "0x83" error robustly. This should 
    fix any issues measuring low level Red only patch values on OLED displays,
    but with slower measurements when this occurs.
  * Added spotread -Y S option to save spectral sensitivity curves and added
    corresponding support in i1d3 driver. This allows for comparison of different
    instruments factory calibrations.
  * Added a -h scale parameter to dispread, to allow the automatic instrument
    calibration test patch values to be scaled down from their default 100%
    value. This is useful with HDR displays.
  * Added manifest to MSWindows executables to use UTF-8 code pages on Windows
    1903 and later. This should improve non-ASCII filename and path handling.
  * Added a Violet colorant to the targen colorant list.
  * Fixed problem with OS X 64 bit backwards compatibility where it failed to
    locate serial instruments when the binaries are run on OS X V12 or latter

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Do not set everything inside doc/ mode 644; otherwise the
  directories are set 644 as well, which means no files inside are
  accessible. This resulted in the past in doc/ actually not being
  added to the devel package.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.3.1:
  * Added value sanity check & warning to chartread patch by patch mode.
  * Fixed crash on 64 bit MSWin in spectro/aglob due to changing SDK
    declarations for _findfirst().
  * Fixed one remaining problem with not coping with "Colour" spelling rather
    than "Color" in cxf2ti3.
  * Add code in cgats write to check for float format problems when faced with
    -inf or +inf value.
  * Fix i1Pro3 highres in ccxxmake, dispcal & dispread.
  * Changed OS X usb reset to re-enumerate instead, as reset does nothing on OS
    X >= 10.8.
  * Added spectro/instlib.api.txt file to public distribution.
  * Fixed possible crashes in xicc/ccss.c and spectro/oeminst.c

• Files Changed
• Browse Source

- Update to version 2.3.0:
* Fixed spotread -YL (i1Pro1/2 lamp remediation) to function even
  if calibration is impossible due to the white reference being out of tolerance.
* Fix SpyderX faulty initial black calibration 
* Added icomuf_reset_before_close flag for SpyderX, as some versions
  of the instrument have been reported to lock up after use.
* Modified the ArgyllCMS CIECAM02 implementation to include a blue
  hue linearization tweak, to improve the "blue goes purple" effect
  when gamut mapping or clipping highly saturated blues to smaller gamuts.
* Added spotread -Y y option that forces the listing of instrument
  specific display calibrations in the usage, even for serial instruments.
* Removed native i1d3 C6 instrument support as a favor to X-Rite.
* Improved cxf2ti3 so that it should cope with XML that uses "Colour"
  spelling rather than "Color".
* Added I1D3_ESCAPE environment variable to allow a user to potentialy
  use any current or future OEM coded i1d3 instrument.

• Files Changed
• Browse Source

- Update to version 2.2.0...

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source