auto commit by copy to link target

• Files Changed
• Browse Source

- Update to version 2.3.0
  * Allow reading raw frames or I/Q data from standard input. To
    enable this, specify "-" as the argument to --iq-file or
    --raw-frames-file option, respectively.
  * Added --prettify-json command line option which enables
    prettification of JSON payloads in libacars >= 2.2.0.
    This currently applies to OHMA messages only.
  * Fixed incompatibility with libacars 2.2.0 which might cause a
    crash during reassembly of CLNP packets.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source

- Update to version 2.2.0
  * Added support for reassembly of multipart CLNP and COTP packets.
    This brings the ability to decode ADS-C v2 messages which are
    too large to fit in a single CLNP / COTP packet, even if
    fragmented in the X.25 layer.
  * Added proper formatting of Route Clearance CPDLC message
    elements.  Removed the obsolete 8-channel limit. The maximum
    number of VDL2 channels that can be decoded simultaneously is
    now limited only by the hardware.
  * Station ID (specified with --station-id option) is now
    appended to the StatsD namespace if StatsD metric collection
    is enabled. For example, if the station ID is set to KLAX, the
    new namespace would be "dumpvdl2.KLAX" instead of just
    "dumpvdl2". This allows simultaneous monitoring of several
    dumpvdl2 instances separately in Grafana.
  * Fixed a crash which occurred when the ground station list
    file could not be opened.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source

- Update to version 2.1.1
  * Fixed wrong ZeroMQ version check, which incorrectly declared
    ZMQ version 4.0.x as too old.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source

- Update to version 2.1.0
  * Added full JSON formatting for all protocols and message types.
    This is supported on all output types - file, udp and zmq.
    Together with multiple outputs feature that was introduced in
    version 2.0.0 this enables arbitrarily flexible arrangements,
    like logging to a file as text, logging to another file as JSON
    and sending JSON across the network using UDP and/or ZMQ. When
    collecting data from multiple receivers, --station-id option
    may be used to assign unique names to receivers in order to
    discriminate input from each one.
  * Removed a few duplicate routines that have their counterparts
    in libacars.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source

- Update to versino 2.0.1
  * Fixed build failure with gcc version 10.

• Files Changed
• Browse Source

- Update to version 2.0.0
  * Major overhaul of the output subsystem. The new architecture
    is modular, multithreaded and can easily be extended with new
    output drivers. It also allows using multiple outputs
    simultaneously.
  * New output configuration scheme. --output-file --daily,
    --hourly and --output-acars-pp options have been removed.
    All outputs are now configured using --output option.
    Adjusting command line parameters is therefore required to run
    the program. Run dumpvdl2 --output help for instructions or
    see "Output configuration" section in README.md for details
    and examples.
  * Support for streaming messages over network using UDP/IP.
  * Support for streaming messages over network using ZeroMQ
    publisher sockets. Requires libzmq library.
  * Support for storing AVLC frames as raw data (without decoding)
    in binary files for archiving purposes. File contents can
    then be decoded anytime later, as if the frames were just
  * received from the air. Requires protobuf-c library.
  * Minor bugfixes.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source

- Update to version 1.10.1
  * Added support for SDRPlay API version 3 which is required for
    new devices (notably RSPdx). API version 2 is still supported,
    however it will probably be removed in a future release. It is
    possible to have both versions installed simultaneously and to
    choose which one to use at runtime. See README.md for details.
  * Added --milliseconds option which enables printing timestamps
    in message headers up to a millisecond precision. Note that the
    arrival timestamp is stored per VDL2 burst, not per VDL2
    message. Since a VDL2 burst may contains more than one VDL2
    message, all messages extracted from a single burst will still
    have exactly the same timestamp value, regardless of whether
    millisecond precision has been enabled or not.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source

- Update to version 1.9.0
  * Added decoder for ISO 8650 / X.227 Association Control Service
    (ACSE).
  * Improved decoder for ISO 8327 / X.225 Session Protocol.
  * Restructured code of ATN applications decoder. The previous
    implementation was a little messy and was unable to handle a
    few uncommon types of messages (like ACSE Abort PDU with no
    payload). This should bring the number of undecoded ATN
    messages down to zero.
  * Enable debugging output from SDRPlay driver only if
    --debug sdr option is used.
  * Fix formatting of geo coordinates in ADS-C v2 messages.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source

- Update to version 1.8.2
  * Fix another crash opportunity due to missing sanity check on
    unparseable ACARS messages.
  * Fix ACARS output to Planeplotter. Only first three characters
    of Message Serial Number (MSN) field were sent instead of all
    four.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source

- Update to version 1.8.1
  * Fix a bug where an unparseable ACARS message could cause the
    program to crash.

• Files Changed
• Browse Source

auto commit by copy to link target

• Files Changed
• Browse Source