baserev update by copy to link target

• Files Changed
• Browse Source

- update to 2.1.0:
  * Make transition from 1.x to 2.x version smoother
  * Fix "protocol" property
  * Fix publish() a bytearray payload
  * Fix some type annotations
  * Fix loop_stop() not stopping thread when called from callback
  * Fix some documentation errors
  * Add support for Unix socket
  * Fix flaky test

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- version update to 2.0.0
  - **BREAKING** Added callback_api_version. This break *ALL* users of paho-mqtt Client class.
    See migrations.md for details on how to upgrade.
    tl; dr; add CallbackAPIVersion.VERSION1 to first argument of Client()
  - **BREAKING** Drop support for Python 2.7, Python 3.5 and Python 3.6
    Minimum tested version is Python 3.7
    Python version up to Python 3.12 are tested.
  - **BREAKING** connect_srv changed it signature to take an additional bind_port parameter.
    This is a breaking change, but in previous version connect_srv was broken anyway.
    Closes #493.
  - **BREAKING** Remove some deprecated argument and method:
  
    * ``max_packets`` argument in loop(), loop_write() and loop_forever() is removed
    * ``force`` argument in loop_stop() is removed
    * method ``message_retry_set()`` is removed
  - **BREAKING** Remove the base62, WebsocketWrapper and ConnectionState, as user shouldn't directly use them.
  - Possible breaking change: Add properties to access most Client attribute. Closes #764.
    Since this add new properties like `logger`, if a sub-class defined `logger`, the two `logger`
    will conflict.
  - Add version 2 of user-callback which allow to access MQTTv5 reason code & properties that were
    missing from on_publish callback. Also it's more consistent in parameter order or between
    MQTTv3 and MQTTv5.
  - Add types to Client class, which caused few change which should be compatible.
    Known risk of breaking changes:
    - Use enum for returned error code (like MQTT_ERR_SUCCESS). It use an IntEnum
      which should be a drop-in replacement. Excepted if someone is doing "rc is 0" instead of "rc == 0".
    - reason in on_connect callback when using MQTTv5 is now always a ReasonCode object. It used to possibly be
      an integer with the value 132.
    - MQTTMessage field "dup" and "retain" used to be integer with value 0 and 1. They are now boolean.
  - Add support for ALPN protocols on TLS connection. Closes #790 & #648.

• Files Changed
• Browse Source

- %check: test the package

• Files Changed
• Browse Source

- update to version 1.6.1:
  - Changed default TLS version to 1.2 instead of 1.0.
  - Fix incoming MQTT v5 messages with overall property length > 127 bytes being
    incorrectly decoded. Closes #541.
  - MQTTMessageInfo.wait_for_publish() and MQTTMessageInfo.is_published() will
    now raise exceptions if called when the publish call produced an error.
    Closes #550.
  - Remove periodic retry checks for outgoing messages with QoS>0. This means
    that outgoing messages will only be retried on the client reconnecting to
    the server. They will *not* be retried when the client is still connected.
  - The `rc` parameter in the `on_disconnect` callback now has meaningful values
    in the case of an error. Closes #441.
  - Callbacks can now be applied to client instances using decorators.
  - PUBACK messages are now sent to the broker only after the on_message
    callback has returned.
  - Raise exceptions when attempting to set MQTT v5 properties to forbidden
    values. Closes #586.
  - Callbacks can now be updated from within a callback.
  - Remove _out_packet_mutex and _current_out_packet_mutex and convert the
    _out_packet queue use to thread safe.
  - Add basic MQTT v5 support to the subscribe and publish helper functions.
    Closes #575.
  - Fix on_disconnect() sometimes calling the MQTT v3.x callback when it should
    call the MQTT v5 callback. Closes #570.
  - Big performance improvement when receiving large payloads, particularly for
    SSL. Closes #571,
  - Fix connecting with MQTT v5 to a broker that doesn't support MQTT v5.
    Closes #566.
  - Removed ancient Mosquitto compatibility class.
  - Fix exception on calling Client(client_id="", clean_session=False).

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to version 1.5.1:
  * Exceptions that occur in callbacks are no longer suppressed
    by default. They can optionally be suppressed by setting
    `client.suppress_exceptions = True`.
  * Fix PUBREL remaining length of > 2 not being accepted for
    MQTT v5 message flows.

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to version 1.5.0:
  * Add support for clean_session on subscribe helper
    (gh#eclipse/paho.mqtt.python#219).
  * Add support for non-standard bridge connection
    (gh#eclipse/paho.mqtt.python#282).
  * Fix hang with QoS 2 message and clean_session = False. The fix
    replace hang with message DROP. See README for known
    limitation (gh#eclipse/paho.mqtt.python#284,
    gh#eclipse/paho.mqtt.python#286).
  * Fix connection establishement timeout
    (gh#eclipse/paho.mqtt.python#291,
    gh#eclipse/paho.mqtt.python#288).
  * Add support for connecting through a proxy
    (gh#eclipse/paho.mqtt.python#315).
  * Add MQTT v5 support (gh#eclipse/paho.mqtt.python#334).
  * Improve error message when sending queue is full
    (gh#eclipse/paho.mqtt.python#378).
  * Improve error handling during initialization on edge case
    (gh#eclipse/paho.mqtt.python#387,
    gh#eclipse/paho.mqtt.python#388).
  * Allow to specify local client port used (similar to
    bind_address) (gh#eclipse/paho.mqtt.python#390).
  * Add method is_connected to know if MQTT connection is
    established (gh#eclipse/paho.mqtt.python#414).
  * Set connection timeout to keepalive
    (gh#eclipse/paho.mqtt.python#425).

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Fix fdupes call

• Files Changed
• Browse Source

baserev update by copy to link target

• Files Changed
• Browse Source

- Update to version 1.4.0:
  * Fix hang when client restarted and broker resumed a session
    with Qos2 message.
  * Fix reconnection loop when a clean_session=True client
    reconnect while Qos2 message are being sent.
  * Catch and log any exception raised by user callback.
  * Improve support for external event loop (like asyncio).
  * Fix order of message with publish.multiple helper.
  * Fix hang on wait_for_published() on bad network.
  * Fix issue with Websocket payload size between 127 and 65536.
  * Closes socket in client destructor to avoid FD leak.
  * Fix uncaught timeout exception during connection.
  * Remove dup flag on PUBREL packet.
  * Use secure entropy source for Websocket mask_key (urandom).
  * Fix mid generation that was not thread-safe.
  * Replace print() statements with proper logging.
  * Allow insecure TLS on publish and subscribe helpers.
  * Allow to remove authentication (reset username to None).
  * Add support for the non-standard bridge mode.

• Files Changed
• Browse Source

initialized devel package after accepting 580349

• Files Changed
• Browse Source

- Update to version 1.3.1:
  * Fix reconnect_delay_set which ignored the max_delay.
  * Fix crash when connection is lost while trying to send message.
  * Fix issue with unicode topic when some character were
    multi-bytes UTF-8.
  * Fix issue with empty Client ID with broker that doesn't support
    them.
  * Fix issue with tls_set that did not allowed
    cert_reqs=ssl.CERT_NONE.

• Files Changed
• Browse Source

• Files Changed
• Browse Source

- Update to version 1.3.0:
  * Requires Python 2.7 or 3.4+.
  * Remove support for SSL without SSLContext (Requires Python
    2.7.9+ or 3.2+).
  * on_connect callback is now always called flags. Previously this
  * callback could accepts 3 OR 4 arguments, now it must accepts 4.
  * tls_insecure_set() must now be called *after* tls_set().
  * Allow username and password to be zero length (as opposed to
  * not being present).
  * Allow zero length client ids when using MQTT v3.1.1.
  * Add SSLContext support, including SNI.
  * Improved support for unicode topic and binary payload.
  * Allow arbitrary Websocket headers and path.
  * Fix issue with large inbound payload over Websocket.
  * Add exponential delay for reconnection.
  * Move unit tests to pytest and tox.
  * Add support for standard Python logging.
  * Fix duplicate incoming QoS==2 message.

• Files Changed
• Browse Source

- Update to version 1.2.3:
  * Fix possible hang of TLS connection during handshake.
  * Fix issue with publish helper with TLS connection.
  * Fix installation issue on non-UTF-8 system.
  * Fix non-working Websocket over TLS connection.
- Remove paho-mqtt-1.2.2-fix-readme-decoding.patch (fixed
  upstream).

• Files Changed
• Browse Source

- Update to version 1.2.2:
  * Fix message lost when using paho.mqtt.publish helper with
    QoS=0 message.
- Changes from version 1.2.1:
  * Handle unicode username and passwords correctly.
  * Fix handling of invalid UTF-8 topics on incoming messages - the
    library now does not attempt to decode the topic - this will
    happen when the user accesses msg.topic in the on_message
    callback. If the topic is not valid UTF-8, an exception will be
    raised.
  * Fix issue with WebSocket connection in case of network issue
    (timeout or connection broken).
  * Fix issue with SSL connection, where latest incoming message
    may be delayed or never processed.
  * Fix possible message lost with publish.single and
    publish.multiple.
- Add paho-mqtt-1.2.2-fix-readme-decoding.patch:
  * Fix error at build when using non-UTF8 locale.

• Files Changed
• Browse Source