openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

Revisions of rtl-sdr

buildservice-autocommit accepted request 1149954 from

Martin Pluskal (pluskalm) 3 months ago (revision 28)

baserev update by copy to link target

Martin Pluskal (pluskalm) accepted request 1149885 from

Dominique Leuenberger (dimstar) 3 months ago (revision 27)

Prepare for RPM 4.20

buildservice-autocommit accepted request 1123217 from

Martin Hauke (mnhauke) 7 months ago (revision 26)

baserev update by copy to link target

Martin Hauke (mnhauke) accepted request 1123175 from

Martin Hauke (mnhauke) 7 months ago (revision 25)

- Update to version 2.0.1
  * Fixup release that contains an updated debian/changelog

Martin Pluskal (pluskalm) accepted request 1122951 from

Martin Hauke (mnhauke) 7 months ago (revision 24)

- Update to version 2.0.0
  * add direct sampling to rtl_sdr
  * add -D direct sampling flag to rtl_tcp
  * add blog v4 upconverter gpio switch
  * fix rtl_tcp error on windows when hints not initialized to 0
  * add rtl-sdr blog v4 support
  * Fix signal handler from getting stuck in an endless loop
  * lib: Stop applying workaround for libusb < 1.0.9
  * lib: force wait state after cancel of usb transfer
  * rtl_fm: add a new option to select 2nd direct sampling mode
  * rtl_tcp: put new DEFAULT_* constants in defines
  * rtl_tcp: Extracted some constants out of printf strings
  * cmake: populate pkgconfig file with prefix
  * Add rtl_biast as install target
  * tuner_r82xx: fix short-write in r82xx_read
  * Fix for CMake < 3.12.0
  * Add missing rtlsdrConfig.cmake
  * rtl_tcp: Initialize listensocket
  * rtl_tcp: Add IPv6 support
  * Use udev uaccess rules
  * rtl_fm/rtl_power: Improve scanning range parsing
  * Improve librtlsdr.pc file
  * lib: enable better UHF reception (>862MHz) for FC0013
  * set CMake policy CMP0075 if it exists
  * rtl_biast: Add rtl_biast
  * lib: Add GPIO version of the bias tee configuration API
  * rtl_eeprom: fix warnings
  * lib: disable usbfs zero-copy support by default
  * lib: fix memory leak in rtlsdr_open()
  * lib: Add workaround for Linux usbfs mmap() bug

Martin Pluskal (pluskalm) accepted request 1113642 from

Wojciech Kazubski (wkazubski) 8 months ago (revision 23)

- new patch rtl-sdr-0022-add-rtl-sdr-blog-v4-support.patch adding
  support for new funcionality in RTL-SDR v4 dongle (taken from git
  tree)
- fix for one minor rpmlint error

Martin Pluskal (pluskalm) accepted request 950287 from

Wojciech Kazubski (wkazubski) over 2 years ago (revision 22)

- new patch rtl-sdr-0021-add-option-for-2nd-direct-sampling-mode.patch
  adding extra option to rtl_fm (borrowed from git tree)
- patches:
    rtl-sdr-0003-disable-zerocopy-by-default.patch
    rtl-sdr-0007-allow-build-rtlsdr-as-subroject.patch
    rtl-sdr-0008-add-CMP0075-policy.patch
    rtl-sdr-0016-add-missing-rtlsdrConfig.patch
    rtl-sdr-0017-add-rtl_biast-as-install-target.patch
    rtl-sdr-0018-fix-for-older-cmake.patch
    rtl-sdr-0020-populate-pkgconfig-with-prefix.patch
  merged into rtl-sdr-0015-modernize-cmake-usage.patch
- patch rtl-sdr-0005-add-rtlsdr_set_bias_tee_gpio.patch
  merged into rtl-sdr-0006-add-rtl_biast.patch
- Added patches to upgrade to latest git head (only significant
  changes), including:
    + rtl-sdr-0001-mmap-bug-arm.patch
    + rtl-sdr-0002-fix-rtlsdr_open-memory-leak.patch
    + rtl-sdr-0003-disable-zerocopy-by-default.patch
    + rtl-sdr-0004-fix-rtl_eeprom-warnings.patch
    + rtl-sdr-0005-add-rtlsdr_set_bias_tee_gpio.patch
    + rtl-sdr-0006-add-rtl_biast.patch
    + rtl-sdr-0007-allow-build-rtlsdr-as-subroject.patch
    + rtl-sdr-0008-add-CMP0075-policy.patch
    + rtl-sdr-0009-fix-FC0013-UHF-reception.patch
    + rtl-sdr-0010-improve-librtlsdr_pc.patch
    + rtl-sdr-0011-improve-rtl_power--scanning-range-parsing.patch
    + rtl-sdr-0012-use-udev-uaccess_rules.patch (not used)
    + rtl-sdr-0013-add-IPV6-for-rtl_tcp.patch
    + rtl-sdr-0014-initialize-listensocket_in-rtl_tcp.patch
    + rtl-sdr-0015-modernize-cmake-usage.patch
    + rtl-sdr-0016-add-missing-rtlsdrConfig.patch
    + rtl-sdr-0017-add-rtl_biast-as-install-target.patch
    + rtl-sdr-0018-fix-for-older-cmake.patch
    + rtl-sdr-0019-fix-short-write-in-r82xx_read.patch
    + rtl-sdr-0020-populate-pkgconfig-with-prefix.patch
  * Full bias tee support for RTL-SDR v3 dongle
  * Command line utility rtl_biast for controlling bias tee
  * IPV-6 support for rtl_tcp
  * Fixed some bugs and compile time issues
- Use more of cmake macros
- Disable developer output from cmake
- Update to version 0.6.0
  * Fix inline functions to use 'static inline'
  * tuner_r82xx: turn off loop-through, remove dead code
  * rtl_adsb: fix hanging upon a signal in Fedora 27
  * lib: use USB zero-copy transfers if possible
- Update to 0.5.4
  * No change log found in source or wiki
  * Drop git-requirement
- Update to version 0.5.3+git.20170919:
  * fix for msvc14
  * Add option '-T' for activating bias-T in rtl_(adsb|fm|power|tcp)
  * rtl_tcp: add command for bias tee control
  * lib: Use GPIO P0 to toggle an (optional) bias-t
  * lib: fix direction bit in GPIO code
- Update to version 0.5.3+git.20170612:
  * lib: use GPIO0 to control bias tee
  * rtl_(adsb|fm|power|tcp): add option -T for activating bias tee
- Use package-meta for tar_scm service and add git-core
  to BuildRequires
- Update group handling
- Add patch: 0001-Better-udev-handling.patch
- Use proper cmake options
- Use group rtlsdr in the udev-rules
- RPM group fix
- Update to version 0.5.3+git.20161127:
  * lib: change default number of transfers to 15
  * rtl_tcp: make all global variables static
  * cmake: include resource file for MSVC builds
  * Correct return code of e4k_reg_write().
  * Allow setting bandwidth for R820T
  * New functions rtlsdr_set_tuner_bandwidth()
  * tools: allow built-in functions for newer versions of MSVC
  * lib: check for libusb init failure
  * lib: add new HanfTek dongle
- Packaging changes:
  * Add _service for easier updating of package
  * Split udev rules to separate package
  * Run spec-cleaner
- Use cmake macros
- update to version 0.5.3_13_ge3e6ee2
  add new HanfTek dongle
- update to version 0.5.3_12_ge3c03f7
  check for libusb init failure
- update to version 0.5.3_10_g8b4d755
  Allow setting bandwidth for R820T
- update to version 0.5.3_6_gd447a2e
- update to version 0.5.2_2_g5f38c05
- Changes to spec file:
  * Update udev paths for openSUSE 13.1 and ensure udev rules are
    updated when package is installed / updated / uninstalled.
  * Define %libname to ease reuse of %post(un) macros
- update to version 0.5.1 
- update to version 0.5.0_git20130915 
- update to version 0.5.git
  * adds support for ASUS U3100MINI_PLUS_V2 
  * set DETACH_KERNEL_DRIVER=ON to allow detaching of kernel driver
- update to version git20130608
  minor enhancements 
- update to version git20130417.
  minor enhancements 
- small changes to the spec file:
  * pass %optflags to cmake according to 
    http://en.opensuse.org/openSUSE:Build_system_recipes 
  * use config(noreplace) for udev rules file
- import into the hamradio repository

Martin Hauke (mnhauke) accepted request 907681 from

Wojciech Kazubski (wkazubski) almost 3 years ago (revision 21)

- patches:
    rtl-sdr-0003-disable-zerocopy-by-default.patch
    rtl-sdr-0007-allow-build-rtlsdr-as-subroject.patch
    rtl-sdr-0008-add-CMP0075-policy.patch
    rtl-sdr-0016-add-missing-rtlsdrConfig.patch
    rtl-sdr-0017-add-rtl_biast-as-install-target.patch
    rtl-sdr-0018-fix-for-older-cmake.patch
  merged into rtl-sdr-0015-modernize-cmake-usage.patch
- patch rtl-sdr-0005-add-rtlsdr_set_bias_tee_gpio.patch
  merged into rtl-sdr-0006-add-rtl_biast.patch
- Added patches to upgrade to latest git head (only significant
  changes), including:
    + rtl-sdr-0001-mmap-bug-arm.patch
    + rtl-sdr-0002-fix-rtlsdr_open-memory-leak.patch
    + rtl-sdr-0003-disable-zerocopy-by-default.patch
    + rtl-sdr-0004-fix-rtl_eeprom-warnings.patch
    + rtl-sdr-0005-add-rtlsdr_set_bias_tee_gpio.patch
    + rtl-sdr-0006-add-rtl_biast.patch
    + rtl-sdr-0007-allow-build-rtlsdr-as-subroject.patch
    + rtl-sdr-0008-add-CMP0075-policy.patch
    + rtl-sdr-0009-fix-FC0013-UHF-reception.patch
    + rtl-sdr-0010-improve-librtlsdr_pc.patch
    + rtl-sdr-0011-improve-rtl_power--scanning-range-parsing.patch
    + rtl-sdr-0012-use-udev-uaccess_rules.patch (not used)
    + rtl-sdr-0013-add-IPV6-for-rtl_tcp.patch
    + rtl-sdr-0014-initialize-listensocket_in-rtl_tcp.patch
    + rtl-sdr-0015-modernize-cmake-usage.patch
    + rtl-sdr-0016-add-missing-rtlsdrConfig.patch
    + rtl-sdr-0017-add-rtl_biast-as-install-target.patch
    + rtl-sdr-0018-fix-for-older-cmake.patch
    + rtl-sdr-0019-fix-short-write-in-r82xx_read.patch
    + rtl-sdr-0020-populate-pkgconfig-with-prefix.patch
  * Full bias tee support for RTL-SDR v3 dongle
  * Command line utility rtl_biast for controlling bias tee
  * IPV-6 support for rtl_tcp
  * Fixed some bugs and compile time issues

buildservice-autocommit accepted request 631915 from

Martin Pluskal (pluskalm) over 5 years ago (revision 20)

baserev update by copy to link target

Martin Pluskal (pluskalm) committed almost 6 years ago (revision 19)

- Use more of cmake macros
- Disable developer output from cmake

Martin Pluskal (pluskalm) accepted request 631856 from

Martin Hauke (mnhauke) almost 6 years ago (revision 18)

- Update to version 0.6.0
  * Fix inline functions to use 'static inline'
  * tuner_r82xx: turn off loop-through, remove dead code
  * rtl_adsb: fix hanging upon a signal in Fedora 27
  * lib: use USB zero-copy transfers if possible

buildservice-autocommit accepted request 615916 from

Martin Pluskal (pluskalm) almost 6 years ago (revision 17)

baserev update by copy to link target

Martin Pluskal (pluskalm) accepted request 615652 from

mrdocs almost 6 years ago (revision 16)

If i586 on TW or Factory fails to build, it is not the package's fault. See recent opensuse-factory email list for the build error. 

- Update to 0.5.4
  * No change log found in source or wiki
  * Drop git-requirement

buildservice-autocommit accepted request 557430 from

Martin Pluskal (pluskalm) over 6 years ago (revision 15)

baserev update by copy to link target

Martin Pluskal (pluskalm) committed over 6 years ago (revision 14)

- Update to version 0.5.3+git.20170919:
  * fix for msvc14
  * Add option '-T' for activating bias-T in rtl_(adsb|fm|power|tcp)
  * rtl_tcp: add command for bias tee control
  * lib: Use GPIO P0 to toggle an (optional) bias-t
  * lib: fix direction bit in GPIO code

buildservice-autocommit accepted request 504389 from

Martin Pluskal (pluskalm) almost 7 years ago (revision 13)

baserev update by copy to link target

Martin Pluskal (pluskalm) accepted request 504335 from

Wojciech Kazubski (wkazubski) almost 7 years ago (revision 12)

New git snapshot, option for bias tee control added

buildservice-autocommit accepted request 490040 from

Martin Pluskal (pluskalm) about 7 years ago (revision 11)

baserev update by copy to link target

Martin Pluskal (pluskalm) accepted request 490039 from

Martin Hauke (mnhauke) about 7 years ago (revision 10)

- Use package-meta for tar_scm service and add git-core
  to BuildRequires

Martin Pluskal (pluskalm) committed about 7 years ago (revision 9)

Displaying revisions 1 - 20 of 28

Places

Revisions of rtl-sdr

Places