File libxl.LIBXL_HOTPLUG_TIMEOUT.patch of Package xen.31431

Overview Repositories Revisions Requests Users Attributes Meta

File libxl.LIBXL_HOTPLUG_TIMEOUT.patch of Package xen.31431

References: bsc#1120095

A domU with a large amount of disks may run into the hardcoded
LIBXL_HOTPLUG_TIMEOUT limit, which is 40 seconds. This happens if the
preparation for each disk takes an unexpected large amount of time. Then
the sum of all configured disks and the individual preparation time will
be larger than 40 seconds. The hotplug script which does the preparation
takes a lock before doing the actual preparation. Since the hotplug
scripts for each disk are spawned at nearly the same time, each one has
to wait for the lock. Due to this contention, the total execution time
of a script can easily exceed the timeout. In this case libxl will
terminate the script because it has to assume an error condition.

Example:
10 configured disks, each one takes 3 seconds within the critital
section. The total execution time will be 30 seconds, which is still
within the limit. With 5 additional configured disks, the total
execution time will be 45 seconds, which would trigger the timeout.

To handle such setup without a recompile of libxl, a special key/value
has to be created in xenstore prior domain creation. This can be done
either manually, or at system startup.

If this systemd service file is placed in /etc/systemd/system/, and
activated, it will create the required entry in xenstore:

/etc/systemd/system # cat xen-LIBXL_HOTPLUG_TIMEOUT.service
[Unit]
Description=set global LIBXL_HOTPLUG_TIMEOUT
ConditionPathExists=/proc/xen/capabilities

Requires=xenstored.service
After=xenstored.service
Requires=xen-init-dom0.service
After=xen-init-dom0.service
Before=xencommons.service

[Service]
Type=oneshot
RemainAfterExit=true
ExecStartPre=/bin/grep -q control_d /proc/xen/capabilities
ExecStart=/usr/bin/xenstore-write /libxl/suse/per-device-LIBXL_HOTPLUG_TIMEOUT 5

[Install]
WantedBy=multi-user.target

/etc/systemd/system # systemctl enable xen-LIBXL_HOTPLUG_TIMEOUT.service
/etc/systemd/system # systemctl start xen-LIBXL_HOTPLUG_TIMEOUT.service

In this example the per-device value will be set to 5 seconds.

The change for libxl which handles this xenstore value will enable
additional logging if the key is found. That extra logging will show how
the execution time of each script.
Index: xen-4.12.4-testing/tools/libxl/libxl_aoutils.c
===================================================================
--- xen-4.12.4-testing.orig/tools/libxl/libxl_aoutils.c
+++ xen-4.12.4-testing/tools/libxl/libxl_aoutils.c
@@ -529,6 +529,8 @@ static void async_exec_timeout(libxl__eg
 {
     libxl__async_exec_state *aes = CONTAINER_OF(ev, *aes, time);
     STATE_AO_GC(aes->ao);
+    char b[64];
+    libxl__suse_diff_timespec(&aes->start, b, sizeof(b));
 
     if (!aes->rc)
         aes->rc = rc;
@@ -536,7 +538,7 @@ static void async_exec_timeout(libxl__eg
     libxl__ev_time_deregister(gc, &aes->time);
 
     assert(libxl__ev_child_inuse(&aes->child));
-    LOG(ERROR, "killing execution of %s because of timeout", aes->what);
+    LOG(ERROR, "killing execution of %s because of timeout%s", aes->what, b);
 
     if (kill(aes->child.pid, SIGKILL)) {
         LOGEV(ERROR, errno, "unable to kill %s [%ld]",
@@ -552,6 +554,10 @@ static void async_exec_done(libxl__egc *
 {
     libxl__async_exec_state *aes = CONTAINER_OF(child, *aes, child);
     STATE_AO_GC(aes->ao);
+    char b[64];
+    libxl__suse_diff_timespec(&aes->start, b, sizeof(b));
+    if (b[0])
+        LOG(NOTICE, "finished execution of '%s'%s", aes->what, b);
 
     libxl__ev_time_deregister(gc, &aes->time);
 
Index: xen-4.12.4-testing/tools/libxl/libxl_create.c
===================================================================
--- xen-4.12.4-testing.orig/tools/libxl/libxl_create.c
+++ xen-4.12.4-testing/tools/libxl/libxl_create.c
@@ -986,6 +986,7 @@ static void initiate_domain_create(libxl
      * build info around just to know if the domain has a device model or not.
      */
     store_libxl_entry(gc, domid, &d_config->b_info);
+    libxl__suse_domain_set_hotplug_timeout(gc, domid, d_config->num_disks, d_config->num_nics);
 
     for (i = 0; i < d_config->num_disks; i++) {
         ret = libxl__disk_devtype.set_default(gc, domid, &d_config->disks[i],
Index: xen-4.12.4-testing/tools/libxl/libxl_device.c
===================================================================
--- xen-4.12.4-testing.orig/tools/libxl/libxl_device.c
+++ xen-4.12.4-testing/tools/libxl/libxl_device.c
@@ -1244,7 +1244,7 @@ static void device_hotplug(libxl__egc *e
     }
 
     aes->ao = ao;
-    aes->what = GCSPRINTF("%s %s", args[0], args[1]);
+    aes->what = GCSPRINTF("%s %s for %s", args[0], args[1], be_path);
     aes->env = env;
     aes->args = args;
     aes->callback = device_hotplug_child_death_cb;
@@ -1253,6 +1253,15 @@ static void device_hotplug(libxl__egc *e
     aes->stdfds[1] = 2;
     aes->stdfds[2] = -1;
 
+    switch (aodev->dev->backend_kind) {
+    case LIBXL__DEVICE_KIND_VBD:
+    case LIBXL__DEVICE_KIND_VIF:
+        if (aodev->num_exec == 0)
+            libxl__suse_domain_get_hotplug_timeout(gc, aodev->dev->domid, aodev->dev->backend_kind, &aes->start, &aes->timeout_ms, be_path);
+    default:
+        break;
+    }
+
     rc = libxl__async_exec_start(aes);
     if (rc)
         goto out;
Index: xen-4.12.4-testing/tools/libxl/libxl_event.c
===================================================================
--- xen-4.12.4-testing.orig/tools/libxl/libxl_event.c
+++ xen-4.12.4-testing/tools/libxl/libxl_event.c
@@ -858,27 +858,29 @@ static void devstate_callback(libxl__egc
 {
     EGC_GC;
     libxl__ev_devstate *ds = CONTAINER_OF(xsw, *ds, w);
+    char b[64];
+    libxl__suse_diff_timespec(&ds->w.start, b, sizeof(b));
 
     if (rc) {
         if (rc == ERROR_TIMEDOUT)
-            LOG(DEBUG, "backend %s wanted state %d "" timed out", ds->w.path,
-                ds->wanted);
+            LOG(DEBUG, "backend %s wanted state %d "" timed out%s", ds->w.path,
+                ds->wanted, b);
         goto out;
     }
     if (!sstate) {
-        LOG(DEBUG, "backend %s wanted state %d"" but it was removed",
-            ds->w.path, ds->wanted);
+        LOG(DEBUG, "backend %s wanted state %d"" but it was removed%s",
+            ds->w.path, ds->wanted, b);
         rc = ERROR_INVAL;
         goto out;
     }
 
     int got = atoi(sstate);
     if (got == ds->wanted) {
-        LOG(DEBUG, "backend %s wanted state %d ok", ds->w.path, ds->wanted);
+        LOG(DEBUG, "backend %s wanted state %d ok%s", ds->w.path, ds->wanted, b);
         rc = 0;
     } else {
-        LOG(DEBUG, "backend %s wanted state %d"" still waiting state %d",
-            ds->w.path, ds->wanted, got);
+        LOG(DEBUG, "backend %s wanted state %d"" still waiting state %d%s",
+            ds->w.path, ds->wanted, got, b);
         return;
     }
 
@@ -904,6 +906,8 @@ int libxl__ev_devstate_wait(libxl__ao *a
     ds->w.path = state_path;
     ds->w.timeout_ms = milliseconds;
     ds->w.callback = devstate_callback;
+    rc = clock_gettime(CLOCK_MONOTONIC, &ds->w.start);
+    if (rc) goto out;
     rc = libxl__xswait_start(gc, &ds->w);
     if (rc) goto out;
 
Index: xen-4.12.4-testing/tools/libxl/libxl_internal.c
===================================================================
--- xen-4.12.4-testing.orig/tools/libxl/libxl_internal.c
+++ xen-4.12.4-testing/tools/libxl/libxl_internal.c
@@ -17,6 +17,97 @@
 
 #include "libxl_internal.h"
 
+#define LIBXL_SUSE_PATH_TIMEOUT "/libxl/suse/per-device-LIBXL_HOTPLUG_TIMEOUT"
+#define LIBXL_SUSE_PATH_DISK_TIMEOUT "suse/disks-LIBXL_HOTPLUG_TIMEOUT"
+#define LIBXL_SUSE_PATH_NIC_TIMEOUT "suse/nics-LIBXL_HOTPLUG_TIMEOUT"
+
+void libxl__suse_domain_set_hotplug_timeout(libxl__gc *gc, uint32_t domid, long d, long n)
+{
+    char *path;
+    char *val, *p;
+    long v;
+
+    val = libxl__xs_read(gc, XBT_NULL, LIBXL_SUSE_PATH_TIMEOUT);
+    if (!val)
+        return;
+
+    v = strtol(val, NULL, 0);
+    if (v <= 0)
+        return;
+
+    path = libxl__xs_libxl_path(gc, domid);
+    if (d > 0) {
+        p = GCSPRINTF("%s/" LIBXL_SUSE_PATH_DISK_TIMEOUT, path);
+        LOGD(NOTICE, domid, "Setting %s to %ld*%ld=%ld", p, d, v, d*v);
+        libxl__xs_printf(gc, XBT_NULL, p, "%ld", d*v);
+    }
+    if (n > 0) {
+        p = GCSPRINTF("%s/" LIBXL_SUSE_PATH_NIC_TIMEOUT, path);
+        LOGD(NOTICE, domid, "Setting %s to %ld*%ld=%ld", p, n, v, n*v);
+        libxl__xs_printf(gc, XBT_NULL, p, "%ld", n*v);
+    }
+}
+
+void libxl__suse_domain_get_hotplug_timeout(libxl__gc *gc, uint32_t domid, libxl__device_kind kind, struct timespec *ts, int *timeout_ms, const char *be_path)
+{
+    char *path;
+    char *val, *p;
+    long v = 0;
+
+    path = libxl__xs_libxl_path(gc, domid);
+    if (!path)
+        return;
+
+    switch (kind) {
+    case LIBXL__DEVICE_KIND_VBD:
+        p = GCSPRINTF("%s/" LIBXL_SUSE_PATH_DISK_TIMEOUT, path);
+        break;
+    case LIBXL__DEVICE_KIND_VIF:
+        p = GCSPRINTF("%s/" LIBXL_SUSE_PATH_NIC_TIMEOUT, path);
+        break;
+    default:
+        return;
+    }
+    errno = 0;
+    val = libxl__xs_read(gc, XBT_NULL, p);
+    if (val)
+        v = strtol(val, NULL, 0);
+    LOGED(DEBUG, domid, "Got from '%s' = %ld from %s for %s", val?:"", v, p, be_path);
+    if (!val || v <= 0)
+        return;
+
+    if (v > (INT_MAX/1000))
+        v = (INT_MAX/1000);
+    v *= 1000;
+    LOGD(NOTICE, domid, "Replacing timeout %d with %ld for %s", *timeout_ms, v, be_path);
+    *timeout_ms = v;
+    if (clock_gettime(CLOCK_MONOTONIC, ts) < 0) {
+        LOGED(ERROR, domid, "clock_gettime failed for %s", be_path);
+        ts->tv_sec = ts->tv_nsec = 0;
+    }
+
+}
+
+void libxl__suse_diff_timespec(const struct timespec *old, char *b, size_t s)
+{
+    struct timespec new, diff;
+
+    if (old->tv_sec == 0 && old->tv_nsec == 0) {
+        *b = '\0';
+        return;
+    }
+    if (clock_gettime(CLOCK_MONOTONIC, &new))
+        new = *old;
+    if ((new.tv_nsec - old->tv_nsec) < 0) {
+        diff.tv_sec = new.tv_sec - old->tv_sec - 1;
+        diff.tv_nsec = new.tv_nsec - old->tv_nsec + (1000*1000*1000);
+    } else {
+        diff.tv_sec = new.tv_sec - old->tv_sec;
+        diff.tv_nsec = new.tv_nsec - old->tv_nsec;
+    }
+    snprintf(b, s, " (%ld.%09lds)", (long)diff.tv_sec, diff.tv_nsec);
+}
+
 void libxl__alloc_failed(libxl_ctx *ctx, const char *func,
                          size_t nmemb, size_t size) {
 #define M "libxl: FATAL ERROR: memory allocation failure"
Index: xen-4.12.4-testing/tools/libxl/libxl_internal.h
===================================================================
--- xen-4.12.4-testing.orig/tools/libxl/libxl_internal.h
+++ xen-4.12.4-testing/tools/libxl/libxl_internal.h
@@ -50,6 +50,7 @@
 #include <sys/un.h>
 #include <sys/file.h>
 #include <sys/ioctl.h>
+#include <time.h>
 
 #include <xenevtchn.h>
 #include <xenstore.h>
@@ -1452,6 +1453,7 @@ struct libxl__xswait_state {
     const char *what; /* for error msgs: noun phrase, what we're waiting for */
     const char *path;
     int timeout_ms; /* as for poll(2) */
+    struct timespec start;
     libxl__xswait_callback *callback;
     /* remaining fields are private to xswait */
     libxl__ev_time time_ev;
@@ -2557,6 +2559,7 @@ struct libxl__async_exec_state {
     char **args; /* execution arguments */
     char **env; /* execution environment */
 
+    struct timespec start;
     /* private */
     libxl__ev_time time;
     libxl__ev_child child;
@@ -4649,6 +4652,9 @@ _hidden int userlookup_helper_getpwuid(l
 
 #endif
 
+_hidden void libxl__suse_domain_set_hotplug_timeout(libxl__gc *gc, uint32_t domid, long d, long n);
+_hidden void libxl__suse_domain_get_hotplug_timeout(libxl__gc *gc, uint32_t domid, libxl__device_kind kind, struct timespec *ts, int *timeout_ms, const char *be_path);
+_hidden void libxl__suse_diff_timespec(const struct timespec *old, char *b, size_t s);
 /*
  * Local variables:
  * mode: C

Places

File libxl.LIBXL_HOTPLUG_TIMEOUT.patch of Package xen.31431

Places