Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Leap:15.5:Update
suse-migration-services.20952
suse-migration-services.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File suse-migration-services.changes of Package suse-migration-services.20952
------------------------------------------------------------------- Thu Aug 12 18:02:35 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Remove no-cd option from zypper-migration command ------------------------------------------------------------------- Wed Aug 11 15:48:31 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.29 → 2.0.30 ------------------------------------------------------------------- Wed Aug 11 15:47:50 UTC 2021 - Jesús Bermúdez Velázquez <jesus.bv@suse.com> - Add valid remote repo prefix (#220) Add valid remote repo prefix Add plugin:/susecloud prefix for repositories checking Remove extra Logger definitions to avoid duplicate entries ------------------------------------------------------------------- Mon Aug 09 14:56:18 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.28 → 2.0.29 ------------------------------------------------------------------- Sun Aug 08 23:44:06 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Set --no-cd option in the right place ------------------------------------------------------------------- Fri Aug 06 07:54:59 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.27 → 2.0.28 ------------------------------------------------------------------- Wed Jul 28 10:51:12 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Make zypper ignore CD/DVDs repositories ------------------------------------------------------------------- Wed Jul 28 10:39:56 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Edit message for pre checks repos - Add a more informative message if problematic repos are found This Fixes #214 ------------------------------------------------------------------- Wed Jul 28 09:42:47 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Add line breaks for remote repos - Remote repos message in pre checks, potentially, will produce long lines. Add line breaks for better readability This Fixes #215 ------------------------------------------------------------------- Fri Jul 23 07:49:43 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.26 → 2.0.27 ------------------------------------------------------------------- Wed Jul 21 18:36:31 UTC 2021 - Stefan Knorr <sknorr@suse.de> - doc: Fix a typo + try to sound more active: "we recommend ..." ------------------------------------------------------------------- Wed Jul 21 18:36:16 UTC 2021 - Stefan Knorr <sknorr@suse.de> - doc/DC: Update to suse2021 stylesheets ------------------------------------------------------------------- Wed Jul 21 08:00:58 UTC 2021 - Marcus Schäfer <ms@suse.de> - Use download-in-advance mode for zypper dup If the DMS was configured to use 'zypper dup' we should download packages in advance for more stability. The reason is that zypper dup always starts with deleting packages and then continues with installing packages. If at install time a package cannot be downloaded for some reason the zypper process ends and leaves the system in an inconsistent state ------------------------------------------------------------------- Thu Jun 10 09:04:39 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.25 → 2.0.26 ------------------------------------------------------------------- Thu Jun 10 08:19:31 UTC 2021 - Marcus Schäfer <ms@suse.de> - Fixed suse-migration-services package build The migration services package must not contain the pre-checks which are only relevant in the activation package ------------------------------------------------------------------- Thu Jun 10 08:11:03 UTC 2021 - Marcus Schäfer <ms@suse.de> - Setup package conflicts properly migration services and migration activation conflicts. The activation is installed on the host to migrate, the services are installed in the live migration image. There is no situation in which migration services and activation is installed on the same host. As both packages are build from the same python sources they have to conflict ------------------------------------------------------------------- Wed Jun 09 16:38:01 UTC 2021 - Marcus Schäfer <ms@suse.de> - Fixed migration services package build Several issues fixed in this commit: * Moving the sed original file over the changed one prior calling sdist invalidates the actual change * Fixed spec template for the activation The package builds a python and a grub.d app. Thus the instructions in the spec file to install from the two places needs to be adapted. In addition the %post section now runs a binary which is called in the process of creating an rpm in the checks processing. Thus all python requirements must be in BuildRequires * Make sure prechecks are grafted in MANIFEST ------------------------------------------------------------------- Wed Jun 09 16:20:42 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.24 → 2.0.25 ------------------------------------------------------------------- Wed May 05 15:12:55 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Add pre checks This extends the activation package - Check no remote repositories - Check filesystem has LUKS encryption The checks are kept in their own files and run on the host, before rebooting. This Fixes #205 ------------------------------------------------------------------- Wed May 05 07:34:22 UTC 2021 - Marcus Schäfer <ms@suse.de> - Update option settings in zypper dup mode When using the DMS in zypper dup mode the option settings --allow-downgrade and --no-confirm are handy. Even though I think with the global non-interactive option set it should not be required to set no-confirm in addition but the worst are questions being asked so better add it. With allow-downgrade set the ability to downgrade packages is given. With zypper dup the repo setup is user defined custom set and therefore downgrades should not be off the table ------------------------------------------------------------------- Mon Apr 26 10:36:40 UTC 2021 - Marcus Schäfer <ms@suse.de> - Respect host kernel boot options for migration Follow up commit to add a reference to bsc#1182520 ------------------------------------------------------------------- Fri Apr 23 14:02:43 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.23 → 2.0.24 ------------------------------------------------------------------- Fri Apr 23 13:48:27 UTC 2021 - Marcus Schäfer <ms@suse.de> - Support symlinks for certificate files ------------------------------------------------------------------- Fri Apr 23 08:41:43 UTC 2021 - Marcus Schäfer <ms@suse.de> - Cracefully handle cert copy exceptions If the copy process of a certificate failed this should not cause the entire migration process to stop. This commit handles copy errors from the cert chain and turns them into a log message. If in the subsequent chain of tasks the migration failed because of missing certificates we will see that in the log and in the attempt to access the repos which is better than the python stacktrace on an unhandled FileNotFoundError exception. Retated to Issue #197 ------------------------------------------------------------------- Thu Apr 22 08:41:10 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.22 → 2.0.23 ------------------------------------------------------------------- Thu Apr 22 08:34:59 UTC 2021 - Marcus Schäfer <ms@suse.de> - Prevent use of shutil.copytree The versions of copytree comes with a different set of features depending on the used python interpreter. The former implementation used an option which did not exist on python in SLE15. To keep us safe from further surprises I moved back to the simple but stable shutil.copy method. We can come up with a refactoring PR when needed but not combined with the fix for the certificates as this was the original intention of the change ------------------------------------------------------------------- Wed Apr 21 15:25:48 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.21 → 2.0.22 ------------------------------------------------------------------- Wed Apr 21 14:17:10 UTC 2021 - Marcus Schäfer <ms@suse.de> - Fixed import of certificates Certificates can exist on several places. This commit makes sure we lookup certificates at the following places: * /usr/share/pki/trust/anchors * /etc/pki/trust/anchors ------------------------------------------------------------------- Tue Apr 20 16:23:02 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.20 → 2.0.21 ------------------------------------------------------------------- Tue Apr 20 15:40:42 UTC 2021 - Marcus Schäfer <ms@suse.de> - Fixed mount of root for detected disk The former implementation looped through a list of block devices, mounted them, looked for the fstab file, reads it and umounted the device again. In a next step we mounted all entries from that fstab file as listed. The problem with this approach is that the mount of the root device already happened and we did it again. As this is not needed it should also not create a problem. But it does create a problem in multipath environments. With the absence of the multipath setup in the live migration system only one of the multipath devices can be mounted. This device was found by our loop approach but is not necessarily the right choice when mounting the device as referenced from the fstab file without multipath running. Therefore this commit makes sure the root device is mounted only once and only through our best guess loop and not by the entry in the fstab file. ------------------------------------------------------------------- Mon Apr 19 08:29:34 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.19 → 2.0.20 ------------------------------------------------------------------- Fri Apr 16 09:12:08 UTC 2021 - Marcus Schäfer <ms@suse.de> - Respect host kernel boot options for migration The kernel boot options used on the host to migrate can be important for the migration live environment too. For example if net.ifnames is passed is influences the network interface names to become predictable. As the DMS inherits configuration data from the host e.g the network setup, it's required that also the kernel boot parameters matches. ------------------------------------------------------------------- Tue Apr 13 16:26:34 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.18 → 2.0.19 ------------------------------------------------------------------- Tue Apr 13 10:17:50 UTC 2021 - Marcus Schäfer <ms@suse.de> - Reference commit for SUSE maintenance This commit adds a reference to bsc#1184278 Avoid multiple mount attempts ------------------------------------------------------------------- Mon Apr 12 14:50:25 UTC 2021 - Marcus Schäfer <ms@suse.de> - Added kernel-firmware to support bare metal better For the DMS to boot on bare metal system we should install the kernel-firmware package. If not present certain systems like HP with Mellanox driver fails to boot. This is related to bsc#1182520 ------------------------------------------------------------------- Mon Apr 12 12:43:55 UTC 2021 - Marcus Schäfer <ms@suse.de> - Fixed loopback root setting The root variable for the loopback search in grub was initialized with the assumption that the /usr/share/ location on the system is on the root partition. This assumption could be incorrect and the code should be smart enough to detect this situation. This Fixes #192 ------------------------------------------------------------------- Mon Apr 12 12:34:26 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Use ismount - Change the command "mount -q $mountpoint" for Python method "os.path.ismount($mountpoint)" ------------------------------------------------------------------- Mon Apr 12 11:07:42 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Avoid multiple mount attempts - Fstab could contain one of the mount points DMS mount explicitly, ending up in an exception. To avoid this, DMS does not mount the explicit mount points if they are in fstab. This Fixes #191 and bcs#1184278 ------------------------------------------------------------------- Thu Mar 25 10:32:40 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.17 → 2.0.18 ------------------------------------------------------------------- Tue Mar 02 16:53:25 UTC 2021 - Marcus Schäfer <ms@suse.de> - Added sort by path order for fstab handling Don't trust the order of entries in the fstab to be correct. Instead add a canonical path order to the fstab entries when processed by the distribution migration system. This Fixes #188 and Fixes bsc#1182520 ------------------------------------------------------------------- Wed Feb 24 09:56:41 UTC 2021 - Marcus Schäfer <ms@suse.de> - Fixed umount inconsistency There is the mount-system service which mounts the system taking fstab into account. If it fails for some reason it also umounts all parts of the system. However in the sequence of the error condition there is also the grub-setup service which uninstalls the migration package and restores the grub config such that the subsequent boot process does no longer boot into the migration system. With the error condition from above the grub-setup service has no chance to perform its jobs because all of system-root has been umounted already. This commit makes sure that mount-service only registers the mount paths but does not umount them in case of a failure. This allows grub-setup to do its job and also allows the reboot service to umount registered devices prior reboot. This is related to bsc#1182520 ------------------------------------------------------------------- Mon Feb 22 11:09:26 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.16 → 2.0.17 ------------------------------------------------------------------- Fri Feb 19 11:28:06 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Do not copy /etc/resolv.conf if empty This Fixes #185 This references bsc#1182234 ------------------------------------------------------------------- Thu Feb 18 10:45:14 UTC 2021 - Marcus Schäfer <ms@suse.de> - Fixed documentation header The information about author, version, date and source link was partially duplicated and also misplaced. This commit cleans it up ------------------------------------------------------------------- Fri Feb 05 11:06:35 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Avoid deprecation warning - Keep the flag whitelist_externals, which will be deprecated for allowlist_externals in the future versions, for compatibility reasons. - update whitelist externals to bash ------------------------------------------------------------------- Fri Feb 05 10:51:34 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.15 → 2.0.16 ------------------------------------------------------------------- Fri Feb 05 10:03:31 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Allow non standard paths Create dir if not exists before copying ------------------------------------------------------------------- Fri Feb 05 09:21:20 UTC 2021 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.14 → 2.0.15 ------------------------------------------------------------------- Thu Feb 04 07:33:11 UTC 2021 - Marcus Schäfer <ms@suse.de> - Move to github actions Travis has a strange opensource model ------------------------------------------------------------------- Tue Feb 02 12:12:53 UTC 2021 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Extend preserved files Add option to preserve files. This fixes #180 This references bsc#1181808 ------------------------------------------------------------------- Mon Nov 16 10:45:54 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.13 → 2.0.14 ------------------------------------------------------------------- Fri Nov 13 12:23:39 UTC 2020 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Set right root type fs When root type is extX, insmod is extX and it should be ext2 that way grub ext2 module supports all extX fs. This Fixes bsc#1178737 ------------------------------------------------------------------- Wed Aug 26 11:53:24 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.12 → 2.0.13 ------------------------------------------------------------------- Wed Aug 26 10:16:26 UTC 2020 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Update SMT cache Due to a cache inconsistency, the cache update needs to be triggered. This is related to bsc#1173654 ------------------------------------------------------------------- Tue Aug 25 13:32:04 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.11 → 2.0.12 ------------------------------------------------------------------- Tue Aug 25 13:29:55 UTC 2020 - Marcus Schäfer <ms@suse.de> - Trim newline at findmnt output The output of the findmnt command returns information that closes with a newline. This newline was used as part of the device name and leads to errors on the subsequent lsblk call which uses this device name. ------------------------------------------------------------------- Tue Aug 25 07:50:09 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.10 → 2.0.11 ------------------------------------------------------------------- Mon Aug 24 15:25:12 UTC 2020 - Marcus Schäfer <ms@suse.de> - Added update of regionserverclnt for Azure In case of the Azure cloud the auto detection code for the root disk device does not work when running the distribution migration live system. Therefore it's required to pass in the correct information as option to azuremetadata. This is related to bsc#1173654 ------------------------------------------------------------------- Fri Aug 21 13:20:40 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.9 → 2.0.10 ------------------------------------------------------------------- Fri Aug 21 13:19:16 UTC 2020 - Marcus Schäfer <ms@suse.de> - Explicitly request python3-azuremetadata There are two packages in the SUSE namespace for an azuremetadata tool. An old one and a new one. It seems the package does not correctly set provides/obsoletes which causes the old azuremetadata package to be pulled in when it should be python3-azuremetadata ------------------------------------------------------------------- Mon Jul 13 13:22:26 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.8 → 2.0.9 ------------------------------------------------------------------- Mon Jul 13 13:20:24 UTC 2020 - Marcus Schäfer <ms@suse.de> - Reference commit for SUSE maintenance This commit adds a reference to bsc#1173654 The rebuild of the DMS image will include an updated version of python3-azuremetadata version="5.1.0" which is required to upgrade from SLE12 to SLE15 in the Azure cloud ------------------------------------------------------------------- Fri Jul 10 07:45:53 UTC 2020 - Marcus Schäfer <ms@suse.de> - Mount EFI subvolume prior loopback If the efi grub modules lives in a btrfs subvolume it's required to mount the subvolume to allow module loading ------------------------------------------------------------------- Wed Jul 08 14:36:14 UTC 2020 - Marcus Schäfer <ms@suse.de> - Use dynamic loader allocation Set linux and initrd loader depending on the grub_platform This is related to bsc#1173532 ------------------------------------------------------------------- Wed Jul 08 14:21:12 UTC 2020 - Marcus Schäfer <ms@suse.de> - Fixed reading of grub cmdline options If the grub setup uses linuxefi or a $linux variable the regular expression to extract the kernel cmdline failed. Related to bsc#1173532 ------------------------------------------------------------------- Tue Jul 07 12:21:59 UTC 2020 - Marcus Schäfer <ms@suse.de> - Use file based syscall for kexec operation To avoid permission problems on load of the kernel use the new KEXEC_FILE_LOAD syscall instead of KEXEC_LOAD This Fixes #174 and Fixes bsc#1173532 ------------------------------------------------------------------- Wed Mar 25 14:49:56 UTC 2020 - Robert Schweikert <rjschwei@suse.com> - Documentation update * Pull cloud specific caveats into their own section * Explicitly set the supported migration path for cloud instances * Minor woring improvements * Remove section about setting the migration target to make it a hidden feature ------------------------------------------------------------------- Tue Mar 24 18:37:28 UTC 2020 - Robert Schweikert <rjschwei@suse.com> - - Improve expressiveness of upgrade condition in case of multiple root file system presence. ------------------------------------------------------------------- Wed Mar 18 17:14:05 UTC 2020 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Rewording for clarity ------------------------------------------------------------------- Mon Feb 24 11:29:23 UTC 2020 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - State the focused system is the main one ------------------------------------------------------------------- Mon Feb 24 09:14:50 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.7 → 2.0.8 ------------------------------------------------------------------- Mon Feb 24 09:14:23 UTC 2020 - Marcus Schäfer <ms@suse.de> - Reference commit for SUSE maintenance This submission creates a reference to bsc#1156068 ------------------------------------------------------------------- Fri Feb 21 13:58:11 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.6 → 2.0.7 ------------------------------------------------------------------- Mon Feb 17 16:30:42 UTC 2020 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Preserve zypper log Mount zypper log in the host system. This Fixes #168 ------------------------------------------------------------------- Mon Feb 17 07:37:27 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.5 → 2.0.6 ------------------------------------------------------------------- Wed Feb 05 17:01:20 UTC 2020 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Mount only existent devices Before, mount service mounted everything on /etc/fstab, now that service takes into account the entries that have an existent path. This Fixes #165 ------------------------------------------------------------------- Wed Jan 29 09:28:41 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.4 → 2.0.5 ------------------------------------------------------------------- Tue Jan 28 11:24:44 UTC 2020 - Marcus Schäfer <ms@suse.de> - Fixed handling of busy state on system-root The console log service holds a busy state on the system-root mount because the log file is written on the host to migrate. At reboot time the service should be stopped to allow a clean umount procedure prior reboot. In addition the console log service should only restart on failure and not always ------------------------------------------------------------------- Thu Jan 23 10:45:23 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.3 → 2.0.4 ------------------------------------------------------------------- Fri Jan 17 14:27:40 UTC 2020 - Marcus Schäfer <ms@suse.de> - Disable lvmetad lvmetad running on the live migration host does not play well with the volumes activated for the system to migrate. Any chrooted operation will cause lvmetad to complain and to fall back to internal scanning ------------------------------------------------------------------- Thu Jan 16 22:13:14 UTC 2020 - Marcus Schäfer <ms@suse.de> - Add support for LVM managed devices LVM managed devices requires the detection as such in the mount_system service as well as the activation of the volume group prior mounting. This Fixes bsc#1156068 ------------------------------------------------------------------- Tue Jan 14 10:43:11 UTC 2020 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Fix typo for doc ------------------------------------------------------------------- Mon Jan 13 12:57:26 UTC 2020 - Robert Schweikert <rjschwei@suse.com> - Update documentation Better clarify the intended use of the system for Public Cloud instances. ------------------------------------------------------------------- Mon Jan 13 11:48:16 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.2 → 2.0.3 ------------------------------------------------------------------- Mon Jan 13 11:47:50 UTC 2020 - Marcus Schäfer <ms@suse.de> - Make sure logger directory exists ------------------------------------------------------------------- Fri Jan 10 15:28:51 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.1 → 2.0.2 ------------------------------------------------------------------- Fri Jan 10 14:21:46 UTC 2020 - Marcus Schäfer <ms@suse.de> - Cleanup and fix logging The logger class contained methods never used. In addition the logging setup was wrong and only partially working. Any unit file represents a systemd call. This means any unit file is an extra program call which requires the initialization of the python logging facility. The logging itself is also extended in a way that any external program calls from the Command class will now be logged and written to the logfile at call time ------------------------------------------------------------------- Fri Jan 10 07:32:55 UTC 2020 - Marcus Schäfer <ms@suse.de> - Conditionally check if the system is registered Only if the zypper migration plugin is used it's required to check if the system is registered. In case use_zypper_migration is deactivated through the config file the migration will run zypper dup with a customer specific set of repositories. In this case it's not neccessarily required that this system is registered to use a SUSE repository server. ------------------------------------------------------------------- Thu Jan 09 15:42:01 UTC 2020 - Marcus Schäfer <ms@suse.de> - Make sure .ssh directory is a managed directory ------------------------------------------------------------------- Thu Jan 09 11:06:53 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 2.0.0 → 2.0.1 ------------------------------------------------------------------- Wed Jan 08 17:08:20 UTC 2020 - Marcus Schäfer <ms@suse.de> - Fixed registration check The SUSEConnect call to check if the system is registered was called in the live migration system environment. Of course there it will fail because the live migration system is never registered. The call has to be performed chrooted inside of the system we want to migrate. Thus the caller arguments as well as the call time in the preparation unit needs a fix ------------------------------------------------------------------- Wed Jan 08 15:56:28 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 1.2.2 → 2.0.0 ------------------------------------------------------------------- Wed Jan 08 15:55:37 UTC 2020 - Marcus Schäfer <ms@suse.de> - Reference commit for SUSE maintenance This submission creates a reference to bsc#1155192 ------------------------------------------------------------------- Wed Jan 08 15:38:47 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 1.2.1 → 1.2.2 ------------------------------------------------------------------- Wed Jan 08 11:08:06 UTC 2020 - Marcus Schäfer <ms@suse.de> - Cleanup code for style and scope Static methods should be explicitly written as such. As we are on python3 there is no need to inherit from Object for classes. Also respect the 80chars per line limit ------------------------------------------------------------------- Wed Jan 08 10:52:13 UTC 2020 - Marcus Schäfer <ms@suse.de> - Fixed static method call The method is_registered is implemented as object method but is called as static method SUSEConnect.is_registered(). This is wrong and causes a python runtime error on missing argument: self ------------------------------------------------------------------- Wed Jan 08 10:38:36 UTC 2020 - Marcus Schäfer <ms@suse.de> - Consolidate image description in git Maintain the live image description which implements the platform for the upgrade process here in git. This allows for better maintenance of the description data as well as provides scope (pubcloud) to the description and also keeps the version number in sync with the process code ------------------------------------------------------------------- Wed Jan 08 09:06:48 UTC 2020 - Marcus Schäfer <ms@suse.de> - Bump version: 1.2.0 → 1.2.1 ------------------------------------------------------------------- Fri Nov 22 15:11:30 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Add valid registration verification System must be registered for the migration to succeed. This Fixes #150 ------------------------------------------------------------------- Fri Nov 22 10:22:51 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Bind mount usr/lib/zypp/plugins/services Bind mounting usr/lib/zypp/plugins causes that old version of urlresolver gets called which breaks the migration on the zypper level. Instead of mounting all the plugins path, only services is needed. This Fixes #151 ------------------------------------------------------------------- Thu Nov 14 10:22:32 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.9 → 1.2.0 ------------------------------------------------------------------- Thu Nov 14 10:18:48 UTC 2019 - Marcus Schäfer <ms@suse.de> - Reference commit for SUSE maintenance This submission creates a reference to bsc#1155192 ------------------------------------------------------------------- Thu Nov 14 09:59:06 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.8 → 1.1.9 ------------------------------------------------------------------- Tue Nov 12 14:50:16 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Add requires for minimun version Boolean expressions are available with rpm >= 4.13 and SLES_SAP provides product(SLES) = %{version}-%{release} ------------------------------------------------------------------- Tue Nov 12 12:08:43 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.7 → 1.1.8 ------------------------------------------------------------------- Tue Nov 12 12:07:55 UTC 2019 - Marcus Schäfer <ms@suse.de> - Disable use of bool expressions in Requires Available with rpm >= 4.13. Thus we can't build for SLE12 because rpm is older there ------------------------------------------------------------------- Tue Nov 12 11:51:11 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.6 → 1.1.7 ------------------------------------------------------------------- Tue Nov 12 11:50:10 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed Requires syntax According to https://rpm.org/user_doc/more_dependencies.html boolean expressions must be embedded into brackets ------------------------------------------------------------------- Tue Nov 12 10:17:35 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.5 → 1.1.6 ------------------------------------------------------------------- Tue Nov 12 10:16:45 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed superfluous newline in changelog generator ------------------------------------------------------------------- Tue Nov 12 10:13:50 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.4 → 1.1.5 ------------------------------------------------------------------- Tue Nov 12 10:12:43 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed changelog reference commit An old reference commit was used which has to be updated because a manual change to the .changes file on obs was done :( ------------------------------------------------------------------- Tue Nov 12 09:34:49 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Add or condition properly ------------------------------------------------------------------- Tue Nov 12 08:36:48 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.3 → 1.1.4 ------------------------------------------------------------------- Tue Nov 12 08:35:52 UTC 2019 - Marcus Schäfer <ms@suse.de> - Added activation spec changes to changelog Changes that happened on the activation package spec file were not part of the package changelog generated by helper/update_changelog.py ------------------------------------------------------------------- Tue Nov 12 08:24:20 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.2 → 1.1.3 ------------------------------------------------------------------- Mon Nov 11 15:51:59 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - The minimum migration starting point should be SLES 12 SP3 or SLES For SAP 12 SP3. ------------------------------------------------------------------- Fri Nov 08 13:09:28 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.1 → 1.1.2 ------------------------------------------------------------------- Fri Nov 08 08:21:34 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed reboot call procedure the systemd magic that detects whether to do kexec or not, is only applied if we invoke reboot. systemd internally maps reboot to one or the other of 'systemctl reboot' or 'systemctl kexec'. Therefore the current implementation which just call 'systemctl reboot' does not transparently detect for kexec. As we don't want to rely on the magic behind the reboot call we explicitly call systemctl with reboot or kecec depending on the configured soft_reboot configuration option. This is then also in line with the code that runs 'kexec load' which also depends on the configured soft_reboot value. ------------------------------------------------------------------- Wed Nov 06 08:31:52 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.1.0 → 1.1.1 ------------------------------------------------------------------- Tue Nov 05 15:59:45 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed reading of config files There are two potential config files, both are optional but one of them was opened in any case and if not present raises an exception. This should not be the case and gets fixed by this commit ------------------------------------------------------------------- Tue Nov 05 15:28:39 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fix changelog inconsistency It seems there was a changelog entry added in obs but not in the git history for the suse-migration-sle15-activation package. This commit brings all in line again ------------------------------------------------------------------- Tue Nov 05 10:35:40 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.0.5 → 1.1.0 ------------------------------------------------------------------- Tue Nov 05 07:04:45 UTC 2019 - Tim Serong <tserong@suse.com> - Do kernel mounts in mount service (not in prepare service) If the /dev, /proc and /sys mounts are done in the prepare service, then exceptions thrown between mount system and prepare result in the grub config not being applied. Moving these mounts earlier in the process ensures that the grub setup service has everything it needs (see https://github.com/SUSE/suse-migration-services/pull/142 for more detailed discussion of the problem). ------------------------------------------------------------------- Thu Oct 31 17:41:06 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Require SUSEConnect updated version In a failed distribution migration scenario, zypper-migration does a rollback. During this rollback, zypper tries to refresh deactivated repos, making the rollback fail. This has been fixed in the newer (0.3.20) version of SUSEConnect. This Fixes #133 ------------------------------------------------------------------- Thu Oct 31 05:28:17 UTC 2019 - Tim Serong <tserong@suse.com> - Add schema validation for migration config file If the custom config file is empty or contains only comment lines, it will now be ignored (rather than raising an exception and killing the migration). If the file is corrupt somehow, or violates schema validation, an error will be logged and the migration will abort. Validation is *also* applied to the default config file (the one inside the migration image). This makes automated testing easy, because we'll effectively do automatic validation on any of the test config files, whether they're for default config or custom config. ------------------------------------------------------------------- Wed Oct 30 14:51:00 UTC 2019 - Marcus Schäfer <ms@suse.de> - Delete left over debug print statement ------------------------------------------------------------------- Wed Oct 30 12:45:28 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Auto detect migration product As there could be different targets (SLES, SLES_SAP, etc) instead of setting the target in the custom file, the migration system auto detects the migration product. In order to do so, the target version is read from the live system. This Fixes #129 ------------------------------------------------------------------- Fri Oct 25 06:59:02 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.0.4 → 1.0.5 ------------------------------------------------------------------- Tue Oct 22 10:28:42 UTC 2019 - Marcus Schäfer <ms@suse.de> - Perform reboot through systemd reboot is performed through systemd. The call through systemd checks if there is a kexec loaded kernel and transparently turns 'systemctl reboot' into 'systemctl kexec'. Thus both ways, soft and hard reboot are managed in one call. This is related to Issue #111 ------------------------------------------------------------------- Tue Oct 22 08:55:05 UTC 2019 - Marcus Schäfer <ms@suse.de> - Allow for vendor change during migration The migration concept allows for the zypper dup as well as for the zypper migrate approach. In the first case the user is responsible for setting up the repos and we expect that to be done in a way that vendor changes are acceptable. In the second case a repository server is used to serve the repos and we expect that registration instance to be trustworthy such that potential vendor changes are also allowed ------------------------------------------------------------------- Mon Oct 21 10:46:23 UTC 2019 - Tim Serong <tserong@suse.com> - Add option to configure reboot method This adds a soft_reboot option, which if set to false results in a hard reboot, as opposed to using kexec. Fixes #111 ------------------------------------------------------------------- Tue Aug 20 10:39:04 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Reference commit for SUSE maintenance Fix BYOS upgrade from 12SP4-SAP to 15 (BSC#1142108) ------------------------------------------------------------------- Tue Aug 20 09:50:26 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.0.3 → 1.0.4 ------------------------------------------------------------------- Tue Aug 20 09:43:50 UTC 2019 - Marcus Schäfer <ms@suse.de> - Switch changelog generation to UTC For new entries the UTC format is used because package submissions will happen from different time zones ------------------------------------------------------------------- Tue Aug 20 09:19:38 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.0.2 → 1.0.3 ------------------------------------------------------------------- Tue Aug 20 09:15:35 UTC 2019 - Marcus Schäfer <ms@suse.de> - Update changelog creation process In the same way like in the kiwi project we apply the creation of the changelog based on a reference file. This allows to work with maintenance which declines any request that changes an entry of the changes file even if this change just updates the full author name ------------------------------------------------------------------- Wed Aug 14 11:29:00 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - This submission creates a reference to bsc#1142108 ------------------------------------------------------------------- Tue Jul 30 09:44:28 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Refactor product setup Add SUSEBaseProduct class to detect and handle the installed base product. Related to Issue #129 ------------------------------------------------------------------- Tue Jul 30 08:06:41 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.0.1 → 1.0.2 ------------------------------------------------------------------- Mon Jul 29 14:41:57 UTC 2019 - Marcus Schäfer <ms@suse.de> - Try to find a more generic name glob match can return, files and directories. We only work on files but the variable should not indicate scope when there is none ------------------------------------------------------------------- Mon Jul 29 14:04:52 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed network setup The network setup was based on an overlay bind mount of the entire /etc/sysconfig/network directory. However that directory also contains script code and functions that are used by system tools like netconfig. The scripts here are not compatible between distributions. Thus the overmount of /etc/sysconfig/network/scripts from SLE12 to SLE15 as one example breaks the netconfig tool and prevents the update of the /etc/resolv.conf file on network restart. Other negative effects of that overmounting are likely. Therefore this commit changes the way we inherit the network setup. Only the plugin directory and the interface configurations are taken from the host, all the rest stays untouched. ------------------------------------------------------------------- Thu Jul 25 16:26:55 UTC 2019 - Stefan Knorr <sknorr@suse.de> - Language/typo fixes ------------------------------------------------------------------- Thu Jul 18 13:22:04 UTC 2019 - Robert Schweikert <rjschwei@suse.com> - - User doc + Clarification around the choices of invoking the migration process using reboot or kexec ------------------------------------------------------------------- Thu Jul 18 08:22:31 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 1.0.0 → 1.0.1 ------------------------------------------------------------------- Wed Jul 17 13:27:53 UTC 2019 - Marcus Schäfer <ms@suse.de> - Update documentation Mention the two methods to start the migration ------------------------------------------------------------------- Wed Jul 17 13:10:22 UTC 2019 - Marcus Schäfer <ms@suse.de> - Partially revert the no bootloader based startup After testing the kexec based implementation to start the migration live image, we found that kexec does not work in all cloud providers. Especially those using Xen like AWS do not work. Thus it's required to keep the alternative bootloader based startup sequence ------------------------------------------------------------------- Wed Jul 17 09:36:26 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 0.6.5 → 1.0.0 ------------------------------------------------------------------- Mon Jul 15 16:26:04 UTC 2019 - Marcus Schäfer <ms@suse.de> - Avoid bootloader to run the migration Instead of a reboot the customer should run the migration by calling run_migration. This commit adds a service utility to run the migration. The concept is based on kexec and avoids the modification to the bootloader setup. This allows more flexibility for clouds that runs instances not directly through a bootloader and also avoids infinite boot/reboot cycles in case of an early error of the migration mount service. This Fixes #108 ------------------------------------------------------------------- Fri Jul 05 12:25:30 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 0.6.4 → 0.6.5 ------------------------------------------------------------------- Fri Jul 05 09:27:05 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixup udev reload on rule changes The current restart sequence is missing the actual set/change of device nodes. This also prevented network interface names to be added/renamed. ------------------------------------------------------------------- Mon Jul 01 10:37:00 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 0.6.3 → 0.6.4 ------------------------------------------------------------------- Mon Jul 01 10:36:32 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed post mount service unit file Wrong path to executable ------------------------------------------------------------------- Mon Jul 01 07:49:51 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 0.6.2 → 0.6.3 ------------------------------------------------------------------- Fri Jun 28 10:07:36 UTC 2019 - Marcus Schäfer <ms@suse.de> - Added limitation note as suggested by Robert ------------------------------------------------------------------- Wed Jun 26 08:40:10 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Rename migration package Avoid confusion and possible error due to wrong package name. Fix #122 ------------------------------------------------------------------- Tue Jun 18 07:04:44 UTC 2019 - Marcus Schäfer <ms@suse.de> - Added doc chapter for new preserve section ------------------------------------------------------------------- Mon Jun 17 15:10:23 UTC 2019 - Marcus Schäfer <ms@suse.de> - Added post mount service The post mount service is used to preserve data from the system to be migrated into the live migration system directly after the mounting of the system to be migrated. It is is also responsible for making that data effective in the live migration system. The current implementation allows for preserving udev rules file and make them active. This Fixes #100 ------------------------------------------------------------------- Wed Jun 12 10:24:39 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Capitalize steps list ------------------------------------------------------------------- Mon Jun 10 14:21:45 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Rename config option to use zypper migration Rename the option to use zypper migration path, wether a plugin or a sub-command is not relevant for the name. Fixes #118 ------------------------------------------------------------------- Fri Jun 07 08:59:28 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 0.6.1 → 0.6.2 ------------------------------------------------------------------- Thu Jun 06 12:59:05 UTC 2019 - Marcus Schäfer <ms@suse.de> - Update per suggestions by Tom ------------------------------------------------------------------- Thu Jun 06 12:24:38 UTC 2019 - Marcus Schäfer <ms@suse.de> - Update per review by Robert ------------------------------------------------------------------- Thu Jun 06 06:10:40 UTC 2019 - Marcus Schäfer <ms@suse.de> - Update per review by Robert ------------------------------------------------------------------- Wed Jun 05 16:03:29 UTC 2019 - Marcus Schäfer <ms@suse.de> - update per review by Jesus ------------------------------------------------------------------- Wed Jun 05 16:00:10 UTC 2019 - Marcus Schäfer <ms@suse.de> - update per review ------------------------------------------------------------------- Wed Jun 05 15:37:49 UTC 2019 - Marcus Schäfer <ms@suse.de> - update per review by Tom ------------------------------------------------------------------- Wed Jun 05 15:33:11 UTC 2019 - Marcus Schäfer <ms@suse.de> - Update per review ------------------------------------------------------------------- Wed Jun 05 14:53:21 UTC 2019 - Marcus Schäfer <ms@suse.de> - Support PARTUUID specifier in fstab ------------------------------------------------------------------- Wed Jun 05 10:51:47 UTC 2019 - Marcus Schäfer <ms@suse.de> - Update documentation Added section about possible config file values including the explanation for the different zypper install modes. This Fixes #99 ------------------------------------------------------------------- Wed Jun 05 09:15:24 UTC 2019 - Marcus Schäfer <ms@suse.de> - Allow to skip local fstab paths If a device path is referenced as local path in the fstab file but can't be found on the system, this device path is skipped. Usually a device path references a storage node that exists as /dev/.. node on the machine. However it's possible to also reference files e.g for loop mount in the fstab file. If that file reference is not present in the live migration system it is ignored because considered harmless. file references in fstab are sometimes used for swapfiles or other file mapped data. For the purpose of the migration we consider such paths as not belonging to the system. This assumption of course could be wrong which is why we also write a warning message to the log file once this situation is disovered. This Fixes #110 ------------------------------------------------------------------- Wed Jun 05 07:10:20 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 0.6.0 → 0.6.1 ------------------------------------------------------------------- Tue Jun 04 16:36:15 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Place network logging in network service ------------------------------------------------------------------- Tue Jun 04 15:46:56 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed SSH identity copy The SSH host identity is provided by the server credentials that makes up the fingerprint of that host. However the copy of the files should exclude the encrypted private key ssh_host_key which can only be read on the origin host. In fact a copy of that file to another host will lead to a segfault in sshd and kills the connection without any further information. ------------------------------------------------------------------- Tue Jun 04 13:25:53 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Log bondN info if bonding directory exists ------------------------------------------------------------------- Tue Jun 04 08:38:52 UTC 2019 - Marcus Schäfer <ms@suse.de> - Bump version: 0.5.30 → 0.6.0 ------------------------------------------------------------------- Tue Jun 04 08:37:07 UTC 2019 - Tim Serong <tserong@suse.com> - Ignore blank lines and comments when parsing fstab ------------------------------------------------------------------- Sat Jun 01 08:43:03 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Provide detailed network information After network.online target is done, we log the network status, interfaces and relevant information. Fixes #84 ------------------------------------------------------------------- Thu May 30 11:02:58 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Inherit ssh host keys The live image creates its ssh host key on boot. However that host key does not match the host key from the system to migrate. This leads to a warning message on a changed host key when a ssh login attempt is made while the migration runs. As the migration live system inherits the network setup it should also inherit the ssh host key. This Fixes #86 ------------------------------------------------------------------- Wed May 29 22:08:19 UTC 2019 - Robert Schweikert <rjschwei@suse.com> - Cosmetic changes to handle error codes from zypper Make it more explicit to the reader that we treat specific values from zypper as errors. Positive side effect is that if the list gets longer the condition does not need to change ------------------------------------------------------------------- Wed May 29 12:12:09 UTC 2019 - Tim Serong <tserong@suse.com> - Try to mount raid partitions `lsblk` returns "raid1" (or similar) for /dev/md devices, so we need to attempt to mount these as well as regular partitions in case the root disk is on mdraid. ------------------------------------------------------------------- Wed May 29 09:37:12 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fix grub setup if root is on a raid device If the root filesystem is on a raid device the boot parameter rd.auto must be passed to the boot such that the dracut raid module can setup the raid prior to iso-scan.sh searching through the devices. Related to Issue #96 ------------------------------------------------------------------- Wed May 29 09:00:03 UTC 2019 - Marcus Schäfer <ms@suse.de> - Rebuild grub conf on uninstall of activation rpm If the activation package is installed a grub config file extension is applied. On uninstall of the package that extension will be deleted but it only becomes effective if the grub config will be rebuild. This Fixes #94 ------------------------------------------------------------------- Tue May 28 15:12:40 UTC 2019 - Marcus Schäfer <ms@suse.de> - Add support for zypper dup mode By default the migration system uses the zypper migration plugin to migrate the system. This works if the system is SLES registered and an upgrade path from SCC exists. For system where this is not possible an alternative method can be switched on with the custom configuration option use_zypper_migration_plugin set to: false. In this mode we just call zypper dup. Please note this requires that the user has pre setup the repositories before the migration system gets started. This Fixes #72 ------------------------------------------------------------------- Tue May 28 13:39:48 UTC 2019 - Tim Serong <tserong@suse.com> - Use `uniq` when finding root device in grub activation script If the system is using mdraid on the root disk, the `lsblk` invocation will return two lines matching "/$", e.g.: /dev/md1 /dev/md1 This then breaks the subsequent `blkid` invocations, so $root_uuid and $root_type are set to empty strings. When you later boot into the migration system, grub gives two errors: error: one argument expected. error: no such device: root. Adding `uniq` fixes this. ------------------------------------------------------------------- Tue May 28 08:40:50 UTC 2019 - Marcus Schäfer <ms@suse.de> - Implement import of custom configuration file Instead of the system-root/etc/sle-migration-service file which was used to setup debugging only we now allow the custom config file system-root/etc/sle-migration-service.yml whose contents gets migrated into the existing /etc/migration-config.yml on the live migration host. ------------------------------------------------------------------- Fri May 24 12:18:04 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - optional file ------------------------------------------------------------------- Fri May 24 12:13:48 UTC 2019 - Jesus Bermudez Velazquez <jesus.bv@suse.com> - Change debug flag file to option Before, to stop rebooting it was needed to place a file as a debug flag. Now there must be a debug key option set in the custom file. ------------------------------------------------------------------- Tue May 14 13:34:02 UTC 2019 - Marcus Schäfer <ms@suse.de> - User documentation Add distribution migration system user documentation. - Caveats and unsupported conditions - Structure and content for the doc tool chain - Recommendation about ssh key access - State that clean up of /etc/issue is needed - Daps style for suse docs ------------------------------------------------------------------- Mon May 06 10:38:16 UTC 2019 - Marcus Schäfer <ms@suse.de> - Fixed spec file of activation package A %install and %build section is required otherwise the default contents of those sections applies which leads to the creation of a debuginfo setup that failed on a noarch package ------------------------------------------------------------------- Thu May 02 13:38:09 UTC 2019 - Marcus Schäfer <ms@suse.de> - Reference commit for SUSE maintenance This submission creates a reference to fate#327175 and bsc#1133919 ------------------------------------------------------------------- Thu May 2 15:16:38 CEST 2019 - ms@suse.de - Bump version: 0.5.29 → 0.5.30 ------------------------------------------------------------------- Thu May 2 15:14:31 CEST 2019 - ms@suse.de - Reference commit for SUSE maintenance This submission creates a reference to fate#327175 and bsc#1133919 ------------------------------------------------------------------- Wed May 1 19:02:00 CEST 2019 - ms@suse.de - Bump version: 0.5.28 → 0.5.29 ------------------------------------------------------------------- Tue Apr 30 11:56:05 CEST 2019 - ms@suse.de - Fix reboot race condition The issue described here came up with the package split and rename of the activation package. The grub setup service deletes the activation package and calls grub2-mkconfig which deletes the migration live boot entry as well as updates grub to boot the migrated system. However if the activation package could not be removed the process ends in a boot loop. Therefore one part of this patch makes the removal of the migration packages more robust. Another part provides detailed log information about the removal and the grub setup in the log file. Last but not least the patch includes a refactoring of the umount and reboot process which offers a race condition if the grub-setup service has failed. The patch here also Delete the umount service and put the code in the reboot service. Only on reboot we umount the system. In case of debugging we want to have full access to the root of the system that should have become migrated. In addition the systemd dependency chain for the kernel-load vs. reboot service was racy and got fixed by a clear dependency for grub-setup -> kernel-load -> reboot ------------------------------------------------------------------- Tue Apr 30 10:06:28 CEST 2019 - ms@suse.de - Bump version: 0.5.27 → 0.5.28 ------------------------------------------------------------------- Tue Apr 30 10:04:59 CEST 2019 - ms@suse.de - Fixed deletion of activation package Due to the split of the services package the activation package name is target specific and needs to be matched by a pattern ------------------------------------------------------------------- Mon Apr 29 11:28:09 CEST 2019 - ms@suse.de - Split activation package from services From a release process it doesn't make sense to keep the activation script as a sub package of the services. The reason is because the suse-migration-services package will be released to the migration target distribution and the activation package will be released to the migration start distribution. Thus the code is relevant on different distributions and it is not useful to maintain that in one package. This Fixes #74 ------------------------------------------------------------------- Wed Apr 24 17:20:47 CEST 2019 - ms@suse.de - Bump version: 0.5.26 → 0.5.27 ------------------------------------------------------------------- Wed Apr 24 14:50:45 CEST 2019 - ms@suse.de - Fixed network requirement To come up with a race free network start the setup-host-network service has to be called after network.target. This ensures the wicked service is already active. An active wicked service allows for a reload of the network service. The setup-host-network service overmounts /etc/sysconfig/network and reloads the network service. That tells the running wicked service to elaborate over the new ifcfg configurations and updates the network status. In the prepare unit we require the network-online target which makes sure it operates only on an online network. ------------------------------------------------------------------- Fri Apr 12 16:00:07 CEST 2019 - ms@suse.de - Bump version: 0.5.25 → 0.5.26 ------------------------------------------------------------------- Thu Apr 11 14:21:17 CEST 2019 - ms@suse.de - Fix network setup service The network setup service for the migration inherits the network as it is configured on the system to become migrated. As part of that process the network is restarted through systemctl. However this is a problem because it interferes with the network service dependency chain. This could result in a failed network startup depending on how fast other services e.g dbus are up and running. So the way we do it causes a race condition. This commit deletes the network startup from our network setup service. Our network setup service runs by definition of the unit file before the network.target. This means at the time the network service activates the network our setup routine is already done and a normal network startup should be guaranteed. ------------------------------------------------------------------- Wed Apr 10 18:28:43 CEST 2019 - ms@suse.de - Bump version: 0.5.24 → 0.5.25 ------------------------------------------------------------------- Wed Apr 10 11:50:24 CEST 2019 - ms@suse.de - Make sure /var/lib/cloudregister exists At cloud registration time information about the SMT/RMT server is provided below /var/lib/cloudregister. For migration it's required to bind mount this path from the system to become migrated into the live migration system. ------------------------------------------------------------------- Tue Apr 9 17:56:09 CEST 2019 - ms@suse.de - Support new cloud regionsrv client The new cloud region service client comes with a plugin for zypper that translates repo URIs into a specific plugin format such that it's no longer possible to gain access to the SLES repositories of our public cloud infrastructure by playing tricks with snapshotting an on-demand instance without the billingtag. However the new and fancy way makes migration of such a system more difficult because the new repo URI format must be known to zypper migration. This requires all software components to be provided in the live migration image which has been done in the image description but furthermore requires that the cloud specific /etc/regionserverclnt.cfg and the contents of /usr/lib/zypp/plugins from the system to migrate are available in the migration live image. The later is implemented in this commit and Fixes #69 ------------------------------------------------------------------- Tue Mar 26 15:13:03 CET 2019 - jesus.bv@suse.com - Bump version: 0.5.23 → 0.5.24 ------------------------------------------------------------------- Tue Mar 26 09:21:30 CET 2019 - jesus.bv@suse.com - Fix pattern for initrd Some images have an extra boot partition, so there are grub files with '/vmlinuz' and we need to handle that case. ------------------------------------------------------------------- Mon Mar 25 10:12:40 CET 2019 - jesus.bv@suse.com - Bump version: 0.5.22 → 0.5.23 ------------------------------------------------------------------- Fri Mar 22 13:06:06 CET 2019 - jesus.bv@suse.com - Copy kernel and initrd for access It copies the files in-memory so kexec can access them once root-path gets umounted. Fixes #65 ------------------------------------------------------------------- Thu Mar 21 16:12:18 CET 2019 - ms@suse.de - Bump version: 0.5.21 → 0.5.22 ------------------------------------------------------------------- Thu Mar 21 16:05:25 CET 2019 - ms@suse.de - Fixed dependency for reboot service The reboot service must be called after mount-service and after umount-service. The mount-service handles the setup of the debug flag. If the reboot service is too fast the debug flag setup is not respected ------------------------------------------------------------------- Thu Mar 21 16:02:12 CET 2019 - ms@suse.de - Fixed logging to logfile The setup of the logfile has to be done on each service at import time. Each service is an extra python call done by systemd. The setup of the logfile needs to be done as an initializer for any unit invocation ------------------------------------------------------------------- Thu Mar 21 14:04:24 CET 2019 - ms@suse.de - Bump version: 0.5.20 → 0.5.21 ------------------------------------------------------------------- Thu Mar 21 12:13:08 CET 2019 - ms@suse.de - Added systemctl status output to logfile As part of the reboot service add the systemctl status information collected up to that point into the logfile. ------------------------------------------------------------------- Thu Mar 21 10:56:33 CET 2019 - ms@suse.de - Fixed log reference in console log service The systemd unit file was still pointing to the old file name but that has changed to var/log/distro_migration.log ------------------------------------------------------------------- Thu Mar 21 10:47:37 CET 2019 - ms@suse.de - Initialize logging and debug as early as possible The earliest opportunity to setup the log file and the debug flag is directly after the mount-system code has successfully mounted the target to migrate. At this point we should init the logfile and also the debugging if needed. The code before this commit has potential to not even reach the log/debug setup. With this commit the only requirement is a successful mount of the target system. ------------------------------------------------------------------- Wed Mar 20 18:10:00 CET 2019 - ms@suse.de - Bump version: 0.5.19 → 0.5.20 ------------------------------------------------------------------- Wed Mar 20 17:56:29 CET 2019 - jesus.bv@suse.com - Add option to handle file conflicts In the scenario where there are packaging bugs, this option install packages even if they replaces files from other packages. Fixes #58 ------------------------------------------------------------------- Wed Mar 20 17:51:58 CET 2019 - ms@suse.de - Fixed handling of debug flag file If this file is present we want to stay in the migration system no matter what happened. This is urgently required to keep us with a way to debug the process. Current testing has shown that only the log file is not enough to debug the complete pipeline. ------------------------------------------------------------------- Fri Mar 15 14:57:46 CET 2019 - jesus.bv@suse.com - Bump version: 0.5.18 → 0.5.19 ------------------------------------------------------------------- Fri Mar 15 08:06:34 CET 2019 - jesus.bv@suse.com - Add flag to handle zypper migration errors Zypper has extra error codes that does not necessarily have to stop a distribution migration. Fixes #52 ------------------------------------------------------------------- Thu Mar 7 16:29:29 CET 2019 - jesus.bv@suse.com - Bump version: 0.5.17 → 0.5.18 ------------------------------------------------------------------- Thu Mar 7 12:14:08 CET 2019 - jesus.bv@suse.com - Path for log file After reboot, if the migration has failed, the file /etc/issue has a message pointing to the log file. The path of that log file must exist inside the rebooted system. ------------------------------------------------------------------- Tue Mar 5 09:19:07 CET 2019 - ms@suse.de - Bump version: 0.5.16 → 0.5.17 ------------------------------------------------------------------- Mon Mar 4 14:13:57 CET 2019 - ms@suse.de - Add rootpart detection to grub activation script The live migration image gets installed to the system again because of the space limitation on /boot. This affects the menuentry created on grub side in a way that we can't use the pre-allocated pointer to the boot device but have to search the root partition like in a real grub root entry. This patch adds the needed code changes to locate the root part, insert the needed filesystem module and initializes the root variable to allow the loopback loading of the image. This Fixes #54 ------------------------------------------------------------------- Mon Mar 4 13:40:57 CET 2019 - ms@suse.de - Revert location change from /usr/share to /boot This reverts commit 66dd8d4943d38f121f4b16b70bf0ab8d0b2ec82d. If there is an extra boot partition and it's too small we are not able to install the migration system and the customer will not be able to use the migration concept. The image is usually around ~300MB of size and that can often be too much for an extra boot partition which is often designed to be small ------------------------------------------------------------------- Fri Mar 1 13:57:07 CET 2019 - jesus.bv@suse.com - Bump version: 0.5.15 → 0.5.16 ------------------------------------------------------------------- Wed Feb 20 11:35:36 CET 2019 - jesus.bv@suse.com - Right path for debug file Copy debug file in a different path so reboot code can read that location in case of debugging. ------------------------------------------------------------------- Tue Feb 19 08:59:29 CET 2019 - ms@suse.de - Bump version: 0.5.14 → 0.5.15 ------------------------------------------------------------------- Wed Feb 13 11:12:11 CET 2019 - jesus.bv@suse.com - Reboot system after migration unless debug The migration process will reboot the system whether it has succeeded or not unless there is a file indicating not to reboot. Fixes #48 ------------------------------------------------------------------- Tue Feb 12 10:50:47 CET 2019 - ms@suse.de - Bump version: 0.5.13 → 0.5.14 ------------------------------------------------------------------- Mon Feb 11 12:39:21 CET 2019 - jesus.bv@suse.com - Report migration error in /etc/issue In order to be able to reboot and still report errors in case the migration fails, the error will be reported in a log file (/var/log/distro_migration.log). The message and log file name to check will be indicated in /etc/issue. Fixes #47 ------------------------------------------------------------------- Fri Feb 8 11:18:28 CET 2019 - ms@suse.de - Bump version: 0.5.12 → 0.5.13 ------------------------------------------------------------------- Fri Feb 8 09:21:09 CET 2019 - jesus.bv@suse.com - Rename migration log file As zypper is part of the process but not the only component, 'zypper_migration.log' does not describe it properly. ------------------------------------------------------------------- Fri Jan 25 16:01:07 CET 2019 - ms@suse.de - Bump version: 0.5.11 → 0.5.12 ------------------------------------------------------------------- Fri Jan 25 11:12:22 CET 2019 - ms@suse.de - Change location for live migration ISO image Instead of /usr/share expect the image in /boot. The reason for this change is because we don't know if the system uses an extra boot partition to load the kernel and initrd from. However the way we add the extra loop boot entry to grub is based on reading the value for ($root) as it was configured on the system. The location ($root) points to in grub could be anywhere but we can trust /boot to be in there. This Fixes the run of the migration in Azure and also stabilizes the concept. ------------------------------------------------------------------- Tue Jan 22 17:32:32 CET 2019 - ms@suse.de - Bump version: 0.5.10 → 0.5.11 ------------------------------------------------------------------- Thu Jan 17 13:46:43 CET 2019 - jesus.bv@suse.com - Detection of baseproduct Find the .prod files inside /etc/products.d which does not contain a flavor tag. Remove the target registration in that .prod file. ------------------------------------------------------------------- Wed Jan 16 15:02:47 CET 2019 - ms@suse.de - Bump version: 0.5.9 → 0.5.10 ------------------------------------------------------------------- Wed Jan 16 11:39:55 CET 2019 - ms@suse.de - Revert/Refactor distro_target handling zypper implements a handling for the distro_target attribute. If present in the repository metadata, zypper compares the value with the baseproduct <target> setup in /etc/products.d. If they mismatch zypper refuses to create the repo. In the process of a migration from distribution [A] to [B] this mismatch always applies by design and prevents the zypper migration plugin to work. In SCC or RMT the repositories doesn't contain the distro_target attribute which is the reason why we don't see this problem there. SMT however creates repos including distro_target. The refactored workaround solution is now to delete the target specification in the baseproduct registration if present, because the overlay mounting of etc/products.d did not work as it would lead to a wrong upgrade path on response from SCC. In addition a backup of the original products.d data is created and used in the zypper migration plugin in case of an error ------------------------------------------------------------------- Wed Jan 16 09:06:55 CET 2019 - ms@suse.de - Bump version: 0.5.8 → 0.5.9 ------------------------------------------------------------------- Tue Jan 15 20:02:36 CET 2019 - ms@suse.de - Added comments to explain the driver of the change ------------------------------------------------------------------- Tue Jan 15 17:39:16 CET 2019 - ms@suse.de - Added product setup service During migration etc/products is a bind mounted location to handle the distro_target issue. At the end of a successful migration the data written to that location must be synced into the migrated system. This task is done by the product service ------------------------------------------------------------------- Tue Jan 15 17:11:34 CET 2019 - ms@suse.de - Handle distro_target Long time ago zypper added a distro_target information into the repository file and matches those with the product information of the system. If the distro doesn't match zypper refused to create the repository. In the migration process using SMT this caused the zypper migration plugin to fail because zypper never created repositories. That's because in a migration process the repository and the system to migrate never match. Therefore we bind mount the /etc/products.d information from the migration live system into the /system-root of the system to become migrated. At the end of a successful migration the new product information is copied to the migrated system ------------------------------------------------------------------- Tue Jan 15 09:14:53 CET 2019 - ms@suse.de - Bump version: 0.5.7 → 0.5.8 ------------------------------------------------------------------- Tue Jan 15 09:13:44 CET 2019 - ms@suse.de - Fixed handling of os.listdir result os.listdir only returns the names of the files in the directory. Thus the file reference in the subsequent copy call was wrong. ------------------------------------------------------------------- Tue Jan 15 08:24:09 CET 2019 - ms@suse.de - Bump version: 0.5.6 → 0.5.7 ------------------------------------------------------------------- Mon Jan 14 16:58:06 CET 2019 - ms@suse.de - Import certificates Copy certificates from /usr/share/pki/trust/anchors of the system to become migrated into the live migration system and update the certificate pool. This Fixes #37 ------------------------------------------------------------------- Mon Jan 14 15:56:48 CET 2019 - ms@suse.de - Bump version: 0.5.5 → 0.5.6 ------------------------------------------------------------------- Mon Jan 14 15:56:12 CET 2019 - ms@suse.de - Fixed console log service The systemd unit file was missing an install target ------------------------------------------------------------------- Mon Jan 14 15:30:22 CET 2019 - ms@suse.de - Bump version: 0.5.4 → 0.5.5 ------------------------------------------------------------------- Mon Jan 14 15:26:53 CET 2019 - ms@suse.de - Changed service type for console logger Move to simple type service and set a restart policy. The way the console logger was started before caused a stop of the service as soon as the kernel or some other program logs information on the console. However during migration we want the console logger to be actively occupy the console such that it's clear a migration process is currently running ------------------------------------------------------------------- Mon Jan 14 15:08:59 CET 2019 - ms@suse.de - Bump version: 0.5.3 → 0.5.4 ------------------------------------------------------------------- Mon Jan 14 14:59:53 CET 2019 - ms@suse.de - Fixed console log service Allow to start console log at any time. Make sure it starts after prepare but do not require prepare as it causes the prepare service to be called again. ------------------------------------------------------------------- Mon Jan 14 11:47:51 CET 2019 - ms@suse.de - Bump version: 0.5.2 → 0.5.3 ------------------------------------------------------------------- Mon Jan 14 09:58:04 CET 2019 - ms@suse.de - Update prepare service on hosts file In the cloud the translation from a name into an IP might also be configured via the static etc/hosts file. In case of SUSE's public cloud infrastructure the connected smt server is configured that way at registration time. For the migration process this means that this information must be present otherwise the host to upgrade cannot be resolved. ------------------------------------------------------------------- Mon Jan 14 09:07:30 CET 2019 - ms@suse.de - Don't truncate migration log file If the zypper based migration process runs it truncates the so far written logfile information. We want to keep all logging data, thus the zypper call has to append information to the existing log file and not overwrite them. ------------------------------------------------------------------- Mon Jan 14 09:05:56 CET 2019 - ms@suse.de - Fixed executable path in console log service systemd requires an absolute path to the called program. This patch fixes the path to the dialog program such that systemd calls it ------------------------------------------------------------------- Fri Jan 11 10:59:03 CET 2019 - ms@suse.de - Bump version: 0.5.1 → 0.5.2 ------------------------------------------------------------------- Tue Jan 8 14:32:02 CET 2019 - jesus.bv@suse.com - Mount kernel file systems inside /system-root The file systems were previously mounted in grub service but because the migration service needs to have access proc, dev and sys inside system-root (e.g. when updating the bootloader) they are mounted in an earlier step. There is no need to mount them again in grub. They are unmounted properly before rebooting. This Fixes #32 ------------------------------------------------------------------- Mon Jan 7 11:15:24 CET 2019 - ms@suse.de - Bump version: 0.5.0 → 0.5.1 ------------------------------------------------------------------- Sun Dec 30 15:25:34 CET 2018 - ms@suse.de - Fix log file initialization We agreed on writing the log file into the root filesystem of the system to migrate. This implies that the first time to initialize this log file is in the prepare service after the mount system service has succeeded. Calling set_logfile in the mount system service before the system got mounted is the wrong place. This patch fixes this and also improves the unit test for this condition. ------------------------------------------------------------------- Wed Dec 19 12:19:42 CET 2018 - ms@suse.de - Bump version: 0.4.3 → 0.5.0 ------------------------------------------------------------------- Tue Dec 18 16:59:25 CET 2018 - jesus.bv@suse.com - Migration file (#30) * Add migration file This file is used to document the migration process inside the system. * Add logging for the services ------------------------------------------------------------------- Tue Dec 11 16:13:16 CET 2018 - ms@suse.de - Require dialog package in spec file ------------------------------------------------------------------- Tue Dec 11 15:33:49 CET 2018 - ms@suse.de - Added zypper migration console logging If the migration process starts the console should show a progress information. We use a dialog tailbox which shows the output of the zypper migration plugin while it runs. The output is processed using a systemd service connected to the console. In addition the log file var/log/zypper_migrate.log Is created inside of the system which gets migrated. This allows for later inspection of what the migration plugin did. This Fixes #27 ------------------------------------------------------------------- Fri Dec 7 11:11:24 CET 2018 - ms@suse.de - Bump version: 0.4.2 → 0.4.3 ------------------------------------------------------------------- Fri Dec 7 11:10:51 CET 2018 - ms@suse.de - Fixed typo in spec file syse vs. suse ------------------------------------------------------------------- Fri Dec 7 11:05:40 CET 2018 - ms@suse.de - Bump version: 0.4.1 → 0.4.2 ------------------------------------------------------------------- Fri Dec 7 11:04:56 CET 2018 - ms@suse.de - Fixed spec file Missing installation of ssh service systemd unit file ------------------------------------------------------------------- Fri Dec 7 11:00:41 CET 2018 - ms@suse.de - Bump version: 0.4.0 → 0.4.1 ------------------------------------------------------------------- Wed Dec 5 15:05:08 CET 2018 - jesus.bv@suse.com - Provide ssh access Copy the authorized key files into the authorized key file of migration user to be able to access through ssh. This checks in /home and /root paths. Fixes #26 ------------------------------------------------------------------- Wed Dec 5 15:00:34 CET 2018 - jesus.bv@suse.com - Proper class name for test ------------------------------------------------------------------- Thu Nov 29 09:45:03 CET 2018 - ms@suse.de - Bump version: 0.3.6 → 0.4.0 ------------------------------------------------------------------- Wed Nov 28 17:15:00 CET 2018 - ms@suse.de - Refactor reboot system The system gets rebooted via kexec or if failed by a hard reboot. For kexec it's required to load kernel, initrd and boot parameters from the migrated system. Thus the kexec load must be done before umount of the system and the actual reboot after umount of the system. Therefore this patch splits the kernel-reboot service into two services, whereas the umount service will be called in between of them. ------------------------------------------------------------------- Wed Nov 28 16:49:27 CET 2018 - ms@suse.de - Fixup ExecStart in kernel reboot service The binary is named suse-migration-kernel-reboot not suse-migration-kernel-load ------------------------------------------------------------------- Wed Nov 28 12:50:03 CET 2018 - ms@suse.de - Bump version: 0.3.5 → 0.3.6 ------------------------------------------------------------------- Wed Nov 28 12:41:58 CET 2018 - ms@suse.de - Fixed removal of suse-migration-activation A simple rpm -e call leads to an error because the package depends on the master package providing the image. Thus it's better to instruct zypper to remove the package including its dependencies ------------------------------------------------------------------- Wed Nov 28 12:31:13 CET 2018 - ms@suse.de - Fixed invocation of Command.run Use of unexpected keyword argument ------------------------------------------------------------------- Wed Nov 28 12:26:14 CET 2018 - ms@suse.de - Fixed kexec reboot kernel and grub lookup In the reboot service the kernel files and the grub config was not searched in the root of the migrated system but in the root of the migration live system, which is the wrong place. ------------------------------------------------------------------- Wed Nov 28 11:56:34 CET 2018 - ms@suse.de - Fixed kernel reboot service The unit requirements and dependencies were set wrong ------------------------------------------------------------------- Tue Nov 27 17:33:34 CET 2018 - ms@suse.de - Bump version: 0.3.4 → 0.3.5 ------------------------------------------------------------------- Tue Nov 27 09:56:34 CET 2018 - jesus.bv@suse.com - Update target for uninstall Set the target properly to uninstall package suse-migration-activation. Fixes #17 ------------------------------------------------------------------- Mon Nov 26 10:46:56 CET 2018 - ms@suse.de - Bump version: 0.3.3 → 0.3.4 ------------------------------------------------------------------- Mon Nov 26 09:27:40 CET 2018 - jjesusbv@gmail.com - Add kexec-tools (#16) * Add kexec-tools This is nedded for rebooting the migrated system with the new kernel. ------------------------------------------------------------------- Sun Nov 25 16:10:27 CET 2018 - jesus.bv@suse.com - Uninstall suse-migration-activation The new grub menu should not have this entry. This solves issue #12 ------------------------------------------------------------------- Fri Nov 23 10:28:20 CET 2018 - ms@suse.de - Bump version: 0.3.2 → 0.3.3 ------------------------------------------------------------------- Fri Nov 23 09:44:46 CET 2018 - ms@suse.de - Set the Migration boot entry to be the default In addition set the boot timeout to 1sec ------------------------------------------------------------------- Thu Nov 22 17:54:59 CET 2018 - jesus.bv@suse.com - Refactor get_cmdline More generic parameter name and better search of target kernel command line options. ------------------------------------------------------------------- Thu Nov 22 15:58:36 CET 2018 - ms@suse.de - Bump version: 0.3.1 → 0.3.2 ------------------------------------------------------------------- Wed Nov 21 13:25:58 CET 2018 - jesus.bv@suse.com - Add kexec reboot service ------------------------------------------------------------------- Wed Nov 21 09:21:23 CET 2018 - ms@suse.de - Added grub config extension to activate migration Provide /etc/grub.d/99_migration plugin which causes the creation of a Migration grub menu entry. In addition the package build was cleaned up and extended by a new sub-package suse-migration-activation which provides that grub config plugin. ------------------------------------------------------------------- Wed Nov 21 09:19:31 CET 2018 - ms@suse.de - Remount system root if booted via grub loopback if the system to become migrated was booted via a grub loopback menuentry, the disk is blocked by that readonly loopback mount and needs to be remounted for read write access first ------------------------------------------------------------------- Mon Nov 19 10:12:17 CET 2018 - ms@suse.de - Bump version: 0.3.0 → 0.3.1 ------------------------------------------------------------------- Mon Nov 19 10:11:43 CET 2018 - ms@suse.de - Hotfix fstab export method Put newline at the end of each fstab entry ------------------------------------------------------------------- Fri Nov 16 14:49:49 CET 2018 - ms@suse.de - Bump version: 0.2.1 → 0.3.0 ------------------------------------------------------------------- Fri Nov 16 13:17:26 CET 2018 - jesus.bv@suse.com - Resolve the mount stack in reverse order ------------------------------------------------------------------- Fri Nov 16 12:42:15 CET 2018 - jesus.bv@suse.com - Remove variable ------------------------------------------------------------------- Fri Nov 16 12:26:27 CET 2018 - jesus.bv@suse.com - Cleanup of mounted paths ------------------------------------------------------------------- Thu Nov 15 14:01:11 CET 2018 - jesus.bv@suse.com - Mount sys ------------------------------------------------------------------- Thu Nov 15 11:43:17 CET 2018 - jesus.bv@suse.com - Test add entry of services calls ------------------------------------------------------------------- Thu Nov 15 10:50:30 CET 2018 - jesus.bv@suse.com - Store service calls ------------------------------------------------------------------- Thu Nov 15 09:49:46 CET 2018 - jesus.bv@suse.com - Make one call ------------------------------------------------------------------- Thu Nov 15 09:46:52 CET 2018 - jesus.bv@suse.com - Add dependencies ------------------------------------------------------------------- Thu Nov 15 09:45:13 CET 2018 - jesus.bv@suse.com - Specific service names ------------------------------------------------------------------- Wed Nov 14 20:29:13 CET 2018 - ms@suse.de - Umount service must run after grub-setup service ------------------------------------------------------------------- Wed Nov 14 18:45:13 CET 2018 - ms@suse.de - Refactor mount path handling Instead of duplicating code in the cleanup service make sure all services which mounts a location updates the mount meta data file /etc/system-root.fstab. The cleanup service in the end just reverse reads that file and umounts all locations ------------------------------------------------------------------- Wed Nov 14 15:44:57 CET 2018 - jesus.bv@suse.com - Update grub file to migrated version ------------------------------------------------------------------- Wed Nov 14 15:32:39 CET 2018 - ms@suse.de - Added umount service The umount service cleans up the migration host such that no active mount reference into the migrated systems exists anymore and we are safe to reboot ------------------------------------------------------------------- Wed Nov 14 10:26:29 CET 2018 - rjschwei@suse.com - Fix typo in doc string ------------------------------------------------------------------- Tue Nov 13 16:12:38 CET 2018 - ms@suse.de - Bump version: 0.2.0 → 0.2.1 ------------------------------------------------------------------- Tue Nov 13 13:20:48 CET 2018 - jesus.bv@suse.com - Fix agree-licenses test ------------------------------------------------------------------- Tue Nov 13 13:12:15 CET 2018 - jesus.bv@suse.com - Fix agree-licenses option typo ------------------------------------------------------------------- Tue Nov 13 11:16:20 CET 2018 - ms@suse.de - Bump version: 0.1.2 → 0.2.0 ------------------------------------------------------------------- Tue Nov 13 11:08:33 CET 2018 - ms@suse.de - Use --non-interactive flag Instead of pre selecting a menu index use the non interactive flag and make the code more robust ------------------------------------------------------------------- Mon Nov 12 15:40:51 CET 2018 - ms@suse.de - Added zypper migration service The service which actually runs the zypper migration plugin. The service is called after the preparation step has completed successfully ------------------------------------------------------------------- Tue Oct 23 11:15:20 CEST 2018 - ms@suse.de - Bump version: 0.1.1 → 0.1.2 ------------------------------------------------------------------- Tue Oct 23 11:12:23 CEST 2018 - ms@suse.de - make sure to restart the network actively ------------------------------------------------------------------- Tue Oct 23 09:31:36 CEST 2018 - ms@suse.de - Bump version: 0.1.0 → 0.1.1 ------------------------------------------------------------------- Mon Oct 22 10:35:07 CEST 2018 - ms@suse.de - The presence of /etc/SUSEConnect is optional Do not fail the prepare service if there is no /etc/SUSEConnect file available on the system to become migrated. Copy the file if present and just continue otherwise ------------------------------------------------------------------- Tue Oct 16 09:02:56 CEST 2018 - ms@suse.de - Bump version: 0.0.1 → 0.1.0 ------------------------------------------------------------------- Mon Oct 15 15:22:47 CEST 2018 - ms@suse.de - Added prepare service The prepare service runs the preparation tasks for systemd to perform the migration. This includes the import of the SUSEConnect configuration from the host as well as the bind mount of the zypp metadata ------------------------------------------------------------------- Mon Oct 15 11:55:11 CEST 2018 - ms@suse.de - Added setup host network service Added service to activate the migration host system network ------------------------------------------------------------------- Wed Oct 10 16:29:56 CEST 2018 - ms@suse.de - Implement mount_system service The mount_system service looks for existing disk partitions and for an fstab file on that partitions. The first partition found with an fstab file is considered the system to upgrade. The fstab file is read in and mounted /system-root in the order of the fstab entries ------------------------------------------------------------------- Wed Oct 10 15:44:42 CEST 2018 - ms@suse.de - Activate travis Ci ------------------------------------------------------------------- Wed Oct 10 15:43:09 CEST 2018 - ms@suse.de - Added command and path helper classes
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
