File shim-install of Package shim.32617

Overview Repositories Revisions Requests Users Attributes Meta

File shim-install of Package shim.32617

#! /bin/bash -e

arch=`uname -m`
rootdir=
bootdir=
efidir=
install_device=
efibootdir=
ca_string=
no_nvram=no
removable=no
clean=no
sysconfdir="/etc"
libdir="/usr/lib64"	# Beware, this is arch dependent!
datadir="/usr/share"
source_dir="${datadir}/efi/${arch}"
efibootmgr="/usr/sbin/efibootmgr"
grub_probe="/usr/sbin/grub2-probe"
grub_mkrelpath="/usr/bin/grub2-mkrelpath"
no_grub_install=no
grub_install="/usr/sbin/grub2-install"
grub_install_target=
self="`basename $0`"
grub_cfg="/boot/grub2/grub.cfg"
update_boot=no
def_grub_efi="${source_dir}/grub.efi"
def_boot_efi=

[ ! -r /usr/etc/default/shim ] || . /usr/etc/default/shim
[ ! -r /etc/default/shim ] || . /etc/default/shim

if [ -z "$def_shim_efi" -o ! -e ${source_dir}/${def_shim_efi} ] ; then
	def_shim_efi="shim.efi"
fi

source_shim_efi="${source_dir}/${def_shim_efi}"

if [ x${arch} = xx86_64 ] ; then
	grub_install_target="x86_64-efi"
	def_boot_efi="bootx64.efi"
elif [ x${arch} = xaarch64 ] ; then
	grub_install_target="arm64-efi"
	def_boot_efi="bootaa64.efi"
else
	echo "Unsupported architecture: ${arch}"
	exit 1
fi

if [ ! -d "${source_dir}" -o ! -e "${def_grub_efi}" ] ; then
    # for outdated packages fall back to previous behavior
    source_dir="$libdir/efi"
    def_grub_efi="${source_dir}/grub.efi"
fi
 
# Get GRUB_DISTRIBUTOR.
if test -f "${sysconfdir}/default/grub" ; then
    . "${sysconfdir}/default/grub"
fi

if [ x"${GRUB_DISTRIBUTOR}" = x ] && [ -f "${sysconfdir}/os-release" ] ; then
    . "${sysconfdir}/os-release"
    GRUB_DISTRIBUTOR="${NAME} ${VERSION}"
fi

bootloader_id="$(echo "$GRUB_DISTRIBUTOR" | tr 'A-Z' 'a-z' | cut -d' ' -f1)"
if test -z "$bootloader_id"; then
    bootloader_id=grub
fi

efi_distributor="$bootloader_id"
bootloader_id="${bootloader_id}-secureboot"

case "$bootloader_id" in
    "sle"*)
        ca_string='SUSE Linux Enterprise Secure Boot CA1';;
    "opensuse"*)
        ca_string='openSUSE Secure Boot CA1';;
    *) ca_string="";;
esac

is_azure () {
    local bios_vendor;
    local product_name;
    local sys_vendor;

local sysfs_dmi_id="/sys/class/dmi/id"

if test -e "${sysfs_dmi_id}/bios_vendor"; then
        bios_vendor=$(cat "${sysfs_dmi_id}/bios_vendor")
    fi
    if test -e "${sysfs_dmi_id}/product_name"; then
        product_name=$(cat "${sysfs_dmi_id}/product_name")
    fi
    if test -e "${sysfs_dmi_id}/sys_vendor"; then
        sys_vendor=$(cat "${sysfs_dmi_id}/sys_vendor")
    fi

if test "x${bios_vendor}" != "xMicrosoft Corporation"; then
	# return false
        return 1
    fi

if test "x${product_name}" != "xVirtual Machine"; then
	# return false
        return 1
    fi

if test "x${sys_vendor}" != "xMicrosoft Corporation"; then
	# return false
        return 1
    fi

# return true
    return 0
}

usage () {
    echo "Usage: $self [OPTION] [INSTALL_DEVICE]"
    echo
    echo "Install Secure Boot Loaders on your drive."
    echo
    echo "--directory=DIR use images from DIR."
    echo "--grub-probe=FILE use FILE as grub-probe."
    echo "--removable the installation device is removable."
    echo "--no-nvram don't update the NVRAM variable."
    echo "--bootloader-id=ID the ID of bootloader."
    echo "--efi-directory=DIR use DIR as the EFI System Partition root."
    echo "--config-file=FILE use FILE as config file, default is $grub_cfg."
    echo "--clean remove all installed files and configs."
    echo "--suse-enable-tpm install grub.efi with TPM support."
    echo "--no-grub-install Do not run grub2-install."
    echo
    echo "INSTALL_DEVICE must be system device filename."
}

argument () {
  opt="$1"
  shift

if test $# -eq 0; then
      echo "$0: option requires an argument -- \`$opt'" 1>&2
      exit 1
  fi
  echo "$1"
}

# Check the arguments.
while test $# -gt 0
do
    option=$1
    shift

case "$option" in
    -h | --help)
	usage
	exit 0 ;;

--root-directory)
	rootdir="`argument $option "$@"`"; shift;;
    --root-directory=*)
	rootdir="`echo "$option" | sed 's/--root-directory=//'`" ;;

--efi-directory)
	efidir="`argument $option "$@"`"; shift;;
    --efi-directory=*)
	efidir="`echo "$option" | sed 's/--efi-directory=//'`" ;;

--directory | -d)
	source_dir="`argument $option "$@"`"; shift;;
    --directory=*)
	source_dir="`echo "$option" | sed 's/--directory=//'`" ;;

--bootloader-id)
	bootloader_id="`argument $option "$@"`"; shift;;
    --bootloader-id=*)
	bootloader_id="`echo "$option" | sed 's/--bootloader-id=//'`" ;;

--grub-probe)
	grub_probe="`argument "$option" "$@"`"; shift;;
    --grub-probe=*)
	grub_probe="`echo "$option" | sed 's/--grub-probe=//'`" ;;

--config-file)
	grub_cfg="`argument "$option" "$@"`"; shift;;
    --config-file=*)
	grub_cfg="`echo "$option" | sed 's/--config-file=//'`" ;;

--removable)
	no_nvram=yes
	removable=yes ;;

--no-nvram)
	no_nvram=yes ;;

--suse-enable-tpm)
        # bsc#1174320 shim-install uses wrong paths for EFI files
        # There are 3 possible locations of grub-tpm.efi and we will check them
        # one by one.
        if [ -e "${source_dir}/grub-tpm.efi" ]; then
            source_grub_efi="${source_dir}/grub-tpm.efi"
	elif [ -e "${datadir}/grub2/${grub_install_target}/grub-tpm.efi" ] ; then
            source_grub_efi="${datadir}/grub2/${grub_install_target}/grub-tpm.efi"
        else
            source_grub_efi="/usr/lib/grub2/${grub_install_target}/grub-tpm.efi"
        fi
       	;;

--clean)
	clean=yes ;;

--no-grub-install)
	no_grub_install=yes ;;

-*)
	echo "Unrecognized option \`$option'"  1>&2
	usage
	exit 1
	;;
    *)
	if test "x$install_device" != x; then
	    echo "More than one install device?" 1>&2
	    usage
	    exit 1
	fi
	install_device="${option}" ;;
    esac
done

if test -n "$efidir"; then
    efi_fs=`"$grub_probe" --target=fs "${efidir}"`
    if test "x$efi_fs" = xfat; then :; else
	echo "$efidir doesn't look like an EFI partition." 1>&2
	efidir=
    fi
fi

if [ -z "$bootdir" ]; then
    bootdir="/boot"
    if [ -n "$rootdir" ] ; then
        # Initialize bootdir if rootdir was initialized.
        bootdir="${rootdir}/boot"
    fi
fi

# Find the EFI System Partition.
if test -n "$efidir"; then
    install_device="`"$grub_probe" --target=device --device-map= "${efidir}"`"
else
    if test -d "${bootdir}/efi"; then
        install_device="`"$grub_probe" --target=device --device-map= "${bootdir}/efi"`"
        # Is it a mount point?
        if test "x$install_device" != "x`"$grub_probe" --target=device --device-map= "${bootdir}"`"; then
    	efidir="${bootdir}/efi"
        fi
    elif test -d "${bootdir}/EFI"; then
        install_device="`"$grub_probe" --target=device --device-map= "${bootdir}/EFI"`"
        # Is it a mount point?
        if test "x$install_device" != "x`"$grub_probe" --target=device --device-map= "${bootdir}"`"; then
    	efidir="${bootdir}/EFI"
        fi
    elif test -n "$rootdir" && test "x$rootdir" != "x/"; then
    # The EFI System Partition may have been given directly using
    # --root-directory.
        install_device="`"$grub_probe" --target=device --device-map= "${rootdir}"`"
    # Is it a mount point?
        if test "x$install_device" != "x`"$grub_probe" --target=device --device-map= "${rootdir}/.."`"; then
    	efidir="${rootdir}"
        fi
    fi

if test -n "$efidir"; then
        efi_fs=`"$grub_probe" --target=fs "${efidir}"`
        if test "x$efi_fs" = xfat; then :; else
    	echo "$efidir doesn't look like an EFI partition." 1>&2
    	efidir=
        fi
    fi
fi

if test -n "$efidir"; then
    efi_file=shim.efi
    efibootdir="$efidir/EFI/boot"
    mkdir -p "$efibootdir" || exit 1
    if test "$removable" = "yes" ; then
      efidir="$efibootdir"
    else
      efidir="$efidir/EFI/$efi_distributor"
      mkdir -p "$efidir" || exit 1
    fi
else
    echo "No valid EFI partition" 1>&2
    exit 1;
fi

if test "$removable" = "no" -a -f "$efibootdir/$def_boot_efi"; then
    if test -n "$ca_string" && (grep -q "$ca_string" "$efibootdir/$def_boot_efi"); then
        update_boot=yes
    fi
else
    update_boot=yes
fi

if test "$clean" = "yes"; then
    rm -f "${efidir}/shim.efi"
    rm -f "${efidir}/MokManager.efi"
    rm -f "${efidir}/grub.efi"
    rm -f "${efidir}/grub.cfg"
    rm -f "${efidir}/boot.csv"
    if test "$update_boot" = "yes"; then
        rm -f "${efibootdir}/${def_boot_efi}"
        rm -f "${efibootdir}/fallback.efi"
        # bsc#1175626, bsc#1175656 also clean up MokManager
        rm -f "${efibootdir}/MokManager.efi"
    fi
    if test "$no_nvram" = no && test -n "$bootloader_id"; then
        # Delete old entries from the same distributor.
        for bootnum in `$efibootmgr | grep '^Boot[0-9]' | \
            fgrep -i " $bootloader_id" | cut -b5-8`; do
            $efibootmgr -b "$bootnum" -B
        done
	fi
	exit 0
fi

cp "${source_dir}/MokManager.efi" "${efidir}"

if test -n "$source_grub_efi" && ! test -f "$source_grub_efi"; then
    echo "File $source_grub_efi doesn't exist, fallback to default one" 1>&2
    source_grub_efi=""
fi

if test -z "$source_grub_efi"; then
    source_grub_efi="$def_grub_efi"
fi

echo "copying $source_grub_efi to ${efidir}/grub.efi"
cp "$source_grub_efi" "${efidir}/grub.efi"

if test "$efidir" != "$efibootdir" ; then 
    cp "${source_shim_efi}" "${efidir}/shim.efi"
    if test -n "$bootloader_id"; then
        echo "shim.efi,${bootloader_id}" | iconv -f ascii -t ucs2 > "${efidir}/boot.csv"
    fi
fi

if test "$update_boot" = "yes"; then
    cp "$source_shim_efi" "${efibootdir}/${def_boot_efi}"
    if test "$removable" = "no"; then
        cp "${source_dir}/fallback.efi" "${efibootdir}"
        # bsc#1175626, bsc#1175656 Since shim 15, loading MokManager becomes
        # mandatory if a MOK request exists. Copy MokManager to \EFI\boot so
        # that boot*.efi can load MokManager to process the request instead
        # of shutting down the system immediately.
        cp "${source_dir}/MokManager.efi" "${efibootdir}"
    fi
fi

prepare_cryptodisk () {
  uuid="$1"

if [ "x$GRUB_CRYPTODISK_PASSWORD" != x ]; then
    echo "cryptomount -u $uuid -p \"$GRUB_CRYPTODISK_PASSWORD\""
    return
  fi

if [ "x$GRUB_TPM2_SEALED_KEY" = x ]; then
    echo "cryptomount -u $uuid"
    return
  fi

tpm_sealed_key="${GRUB_TPM2_SEALED_KEY}"

declare -g TPM_PCR_SNAPSHOT_TAKEN

if [ -z "$TPM_PCR_SNAPSHOT_TAKEN" ]; then
    TPM_PCR_SNAPSHOT_TAKEN=1

# Check if tpm_record_pcrs is available and set the command to
    # grub.cfg.
    if grep -q "tpm_record_pcrs" ${datadir}/grub2/${arch}-efi/command.lst ; then
      echo "tpm_record_pcrs 0-9"
    fi
  fi

tpm_srk_alg="${GRUB_TPM2_SRK_ALG}"

if [ -z "$tpm_srk_alg" ]; then
    tpm_srk_alg="RSA"
  fi

cat <<EOF
tpm2_key_protector_init -a $tpm_srk_alg -T \$prefix/$tpm_sealed_key
if ! cryptomount -u $uuid --protector tpm2; then
    cryptomount -u $uuid
fi
EOF
}

make_grubcfg () {

grub_cfg_dirname=`dirname $grub_cfg`
grub_cfg_basename=`basename $grub_cfg`
cfg_fs_uuid=`"$grub_probe" --target=fs_uuid "$grub_cfg_dirname"`
# bsc#1153953 - Leap 42.3 boot error snapshot missing
# We have to check btrfs is used as root file system to enable relative path
# lookup for file to be on par with other utility which also accounts for it.
GRUB_FS="$(stat -f --printf=%T / || echo unknown)"

if test "x$SUSE_BTRFS_SNAPSHOT_BOOTING" = "xtrue" &&
   [ "x${GRUB_FS}" = "xbtrfs" ] ; then
cat <<EOF
set btrfs_relative_path="yes"
EOF
if ${grub_mkrelpath} --usage | grep -q -e '--relative'; then
  grub_mkrelpath="${grub_mkrelpath} -r"
fi
fi

if [ x$GRUB_ENABLE_CRYPTODISK = xy ]; then
  for uuid in `"${grub_probe}" --target=cryptodisk_uuid --device-map= "${grub_cfg_dirname}"`; do
    prepare_cryptodisk "$uuid"
  done
fi

hints="`"${grub_probe}" --target=hints_string "${grub_cfg_dirname}" 2> /dev/null`"

if [ "x$hints" != x ]; then
  echo "if [ x\$feature_platform_search_hint = xy ]; then"
  echo "  search --no-floppy --fs-uuid --set=root ${hints} ${cfg_fs_uuid}"
  echo "else"
  echo "  search --no-floppy --fs-uuid --set=root ${cfg_fs_uuid}"
  echo "fi"
else
  echo "search --no-floppy --fs-uuid --set=root ${cfg_fs_uuid}"
fi

cat <<EOF
set prefix=(\${root})`${grub_mkrelpath} ${grub_cfg_dirname}`
source "\${prefix}/${grub_cfg_basename}"
EOF

}

# bnc#889765 GRUB shows broken letters at boot
# invoke grub_install to initialize /boot/grub2 directory with files needed by grub.cfg
# bsc#1118363 shim-install didn't specify the target for grub2-install
# set the target explicitly for some special cases 
if test "$no_grub_install" != "yes"; then
  ${grub_install} --target=${grub_install_target} --no-nvram
fi

# Making sure grub.cfg not overwritten by grub-install above 
make_grubcfg > "${efidir}/grub.cfg"

if test "$no_nvram" = no && test -n "$bootloader_id"; then

modprobe -q efivars 2>/dev/null || true

# Delete old entries from the same distributor.
    for bootnum in `$efibootmgr | grep '^Boot[0-9]' | \
        fgrep -i " $bootloader_id" | cut -b5-8`; do
        $efibootmgr -b "$bootnum" -B
    done

efidir_drive="$("$grub_probe" --target=drive --device-map= "$efidir")"
    efidir_disk="$("$grub_probe" --target=disk --device-map= "$efidir")"
    if test -z "$efidir_drive" || test -z "$efidir_disk"; then
        echo "Can't find GRUB drive for $efidir; unable to create EFI Boot Manager entry." >&2
    # bsc#1119762 If the MD device is partitioned, we just need to create one
    # boot entry since the partitions are nested partitions and the mirrored
    # partitions share the same UUID.
    elif [[ "$efidir_drive" == \(mduuid/* && "$efidir_drive" != \(mduuid/*,* ]]; then
        eval $(mdadm --detail --export "$efidir_disk" |
          perl -ne 'print if m{^MD_LEVEL=}; push( @D, $1) if (m{^MD_DEVICE_\S+_DEV=(\S+)$});
                    sub END() {print "MD_DEVS=\"", join( " ", @D), "\"\n";};')
        if [ "$MD_LEVEL" != "raid1" ]; then
            echo "GRUB drive for $efidir not on RAID1; unable to create EFI Boot Manager entry." >&2
        fi
        for mddev in $MD_DEVS; do
            efidir_drive="$("$grub_probe" --target=drive --device-map= -d "$mddev")"
            efidir_disk="$("$grub_probe" --target=disk --device-map= -d "$mddev")"
            efidir_part="$(echo "$efidir_drive" | sed 's/^([^,]*,[^0-9]*//; s/[^0-9].*//')"
            efidir_d=${mddev#/dev/}
            $efibootmgr -c -d "$efidir_disk" -p "$efidir_part" -w \
              -L "$bootloader_id ($efidir_d)" -l "\\EFI\\$efi_distributor\\$efi_file"
        done
    else
        efidir_part="$(echo "$efidir_drive" | sed 's/^([^,]*,[^0-9]*//; s/[^0-9].*//')"
        $efibootmgr -c -d "$efidir_disk" -p "$efidir_part" -w \
    	-L "$bootloader_id" -l "\\EFI\\$efi_distributor\\$efi_file"
    fi
fi

# bsc#1185464 bsc#1185961
# The Azure firmware sometimes doesn't respect the boot option created by
# either efibootmgr or fallback.efi so we have to remove fallback.efi to
# avoid the endless reset loop.
if is_azure; then
    # Skip the workaround if we don't own \EFI\Boot or the removable
    # option is used
    if test "$update_boot" = "yes" && test "$removable" = "no"; then
        # Remove fallback.efi which could cause the reset loop in Azure
        rm -f "${efibootdir}/fallback.efi"
        # Remove the older grub binary and config
        rm -f "${efibootdir}/grub.efi"
        rm -f "${efibootdir}/grub.cfg"
        # Install new grub binary and config file to \EFI\Boot as
        # the "removable" option
        cp "${efidir}/grub.cfg" "${efibootdir}/grub.cfg"
        cp "${efidir}/grub.efi" "${efibootdir}/grub.efi"
    fi
fi

Places

File shim-install of Package shim.32617

Places