Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Leap:15.5:Update
qemu-testsuite.19806
0148-Linux-headers-update.patch
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File 0148-Linux-headers-update.patch of Package qemu-testsuite.19806
From: Cornelia Huck <cohuck@redhat.com> Date: Tue, 9 Jun 2020 16:26:53 +0200 Subject: Linux headers: update Include-If: %if 0%{?suse_version} == 1315 Git-commit: f76b348ec78fb7316bbcc981127ae8894cfcc609 (partial) References: bsc#1179725 Update against Linux 5.8-rc1. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Cho, Yu-Chen <acho@suse.com> --- linux-headers/linux/kvm.h | 18 ++- linux-headers/linux/vfio.h | 322 +++++++++++++++++++++++++++++++++++++ 2 files changed, 338 insertions(+), 2 deletions(-) diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index 9804495a46c51b83e024686c91b5..a28c3667370bd61757cc1e7e5ef9 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -116,7 +116,7 @@ struct kvm_irq_level { * ACPI gsi notion of irq. * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47.. * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23.. - * For ARM: See Documentation/virt/kvm/api.txt + * For ARM: See Documentation/virt/kvm/api.rst */ union { __u32 irq; @@ -188,10 +188,13 @@ struct kvm_s390_cmma_log { struct kvm_hyperv_exit { #define KVM_EXIT_HYPERV_SYNIC 1 #define KVM_EXIT_HYPERV_HCALL 2 +#define KVM_EXIT_HYPERV_SYNDBG 3 __u32 type; + __u32 pad1; union { struct { __u32 msr; + __u32 pad2; __u64 control; __u64 evt_page; __u64 msg_page; @@ -201,6 +204,15 @@ struct kvm_hyperv_exit { __u64 result; __u64 params[2]; } hcall; + struct { + __u32 msr; + __u32 pad2; + __u64 control; + __u64 status; + __u64 send_page; + __u64 recv_page; + __u64 pending_page; + } syndbg; } u; }; @@ -1017,6 +1029,8 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_VCPU_RESETS 179 #define KVM_CAP_S390_PROTECTED 180 #define KVM_CAP_PPC_SECURE_GUEST 181 +#define KVM_CAP_HALT_POLL 182 +#define KVM_CAP_ASYNC_PF_INT 183 #ifdef KVM_CAP_IRQ_ROUTING @@ -1107,7 +1121,7 @@ struct kvm_xen_hvm_config { * * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies * the irqfd to operate in resampling mode for level triggered interrupt - * emulation. See Documentation/virt/kvm/api.txt. + * emulation. See Documentation/virt/kvm/api.rst. */ #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1) diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h index a41c45286511f083878c06b60d71..f09df262c4b52dfcef1d66ee0bdc 100644 --- a/linux-headers/linux/vfio.h +++ b/linux-headers/linux/vfio.h @@ -305,6 +305,7 @@ struct vfio_region_info_cap_type { #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff) #define VFIO_REGION_TYPE_GFX (1) #define VFIO_REGION_TYPE_CCW (2) +#define VFIO_REGION_TYPE_MIGRATION (3) /* sub-types for VFIO_REGION_TYPE_PCI_* */ @@ -378,6 +379,235 @@ struct vfio_region_gfx_edid { /* sub-types for VFIO_REGION_TYPE_CCW */ #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1) +#define VFIO_REGION_SUBTYPE_CCW_SCHIB (2) +#define VFIO_REGION_SUBTYPE_CCW_CRW (3) + +/* sub-types for VFIO_REGION_TYPE_MIGRATION */ +#define VFIO_REGION_SUBTYPE_MIGRATION (1) + +/* + * The structure vfio_device_migration_info is placed at the 0th offset of + * the VFIO_REGION_SUBTYPE_MIGRATION region to get and set VFIO device related + * migration information. Field accesses from this structure are only supported + * at their native width and alignment. Otherwise, the result is undefined and + * vendor drivers should return an error. + * + * device_state: (read/write) + * - The user application writes to this field to inform the vendor driver + * about the device state to be transitioned to. + * - The vendor driver should take the necessary actions to change the + * device state. After successful transition to a given state, the + * vendor driver should return success on write(device_state, state) + * system call. If the device state transition fails, the vendor driver + * should return an appropriate -errno for the fault condition. + * - On the user application side, if the device state transition fails, + * that is, if write(device_state, state) returns an error, read + * device_state again to determine the current state of the device from + * the vendor driver. + * - The vendor driver should return previous state of the device unless + * the vendor driver has encountered an internal error, in which case + * the vendor driver may report the device_state VFIO_DEVICE_STATE_ERROR. + * - The user application must use the device reset ioctl to recover the + * device from VFIO_DEVICE_STATE_ERROR state. If the device is + * indicated to be in a valid device state by reading device_state, the + * user application may attempt to transition the device to any valid + * state reachable from the current state or terminate itself. + * + * device_state consists of 3 bits: + * - If bit 0 is set, it indicates the _RUNNING state. If bit 0 is clear, + * it indicates the _STOP state. When the device state is changed to + * _STOP, driver should stop the device before write() returns. + * - If bit 1 is set, it indicates the _SAVING state, which means that the + * driver should start gathering device state information that will be + * provided to the VFIO user application to save the device's state. + * - If bit 2 is set, it indicates the _RESUMING state, which means that + * the driver should prepare to resume the device. Data provided through + * the migration region should be used to resume the device. + * Bits 3 - 31 are reserved for future use. To preserve them, the user + * application should perform a read-modify-write operation on this + * field when modifying the specified bits. + * + * +------- _RESUMING + * |+------ _SAVING + * ||+----- _RUNNING + * ||| + * 000b => Device Stopped, not saving or resuming + * 001b => Device running, which is the default state + * 010b => Stop the device & save the device state, stop-and-copy state + * 011b => Device running and save the device state, pre-copy state + * 100b => Device stopped and the device state is resuming + * 101b => Invalid state + * 110b => Error state + * 111b => Invalid state + * + * State transitions: + * + * _RESUMING _RUNNING Pre-copy Stop-and-copy _STOP + * (100b) (001b) (011b) (010b) (000b) + * 0. Running or default state + * | + * + * 1. Normal Shutdown (optional) + * |------------------------------------->| + * + * 2. Save the state or suspend + * |------------------------->|---------->| + * + * 3. Save the state during live migration + * |----------->|------------>|---------->| + * + * 4. Resuming + * |<---------| + * + * 5. Resumed + * |--------->| + * + * 0. Default state of VFIO device is _RUNNNG when the user application starts. + * 1. During normal shutdown of the user application, the user application may + * optionally change the VFIO device state from _RUNNING to _STOP. This + * transition is optional. The vendor driver must support this transition but + * must not require it. + * 2. When the user application saves state or suspends the application, the + * device state transitions from _RUNNING to stop-and-copy and then to _STOP. + * On state transition from _RUNNING to stop-and-copy, driver must stop the + * device, save the device state and send it to the application through the + * migration region. The sequence to be followed for such transition is given + * below. + * 3. In live migration of user application, the state transitions from _RUNNING + * to pre-copy, to stop-and-copy, and to _STOP. + * On state transition from _RUNNING to pre-copy, the driver should start + * gathering the device state while the application is still running and send + * the device state data to application through the migration region. + * On state transition from pre-copy to stop-and-copy, the driver must stop + * the device, save the device state and send it to the user application + * through the migration region. + * Vendor drivers must support the pre-copy state even for implementations + * where no data is provided to the user before the stop-and-copy state. The + * user must not be required to consume all migration data before the device + * transitions to a new state, including the stop-and-copy state. + * The sequence to be followed for above two transitions is given below. + * 4. To start the resuming phase, the device state should be transitioned from + * the _RUNNING to the _RESUMING state. + * In the _RESUMING state, the driver should use the device state data + * received through the migration region to resume the device. + * 5. After providing saved device data to the driver, the application should + * change the state from _RESUMING to _RUNNING. + * + * reserved: + * Reads on this field return zero and writes are ignored. + * + * pending_bytes: (read only) + * The number of pending bytes still to be migrated from the vendor driver. + * + * data_offset: (read only) + * The user application should read data_offset field from the migration + * region. The user application should read the device data from this + * offset within the migration region during the _SAVING state or write + * the device data during the _RESUMING state. See below for details of + * sequence to be followed. + * + * data_size: (read/write) + * The user application should read data_size to get the size in bytes of + * the data copied in the migration region during the _SAVING state and + * write the size in bytes of the data copied in the migration region + * during the _RESUMING state. + * + * The format of the migration region is as follows: + * ------------------------------------------------------------------ + * |vfio_device_migration_info| data section | + * | | /////////////////////////////// | + * ------------------------------------------------------------------ + * ^ ^ + * offset 0-trapped part data_offset + * + * The structure vfio_device_migration_info is always followed by the data + * section in the region, so data_offset will always be nonzero. The offset + * from where the data is copied is decided by the kernel driver. The data + * section can be trapped, mmapped, or partitioned, depending on how the kernel + * driver defines the data section. The data section partition can be defined + * as mapped by the sparse mmap capability. If mmapped, data_offset must be + * page aligned, whereas initial section which contains the + * vfio_device_migration_info structure, might not end at the offset, which is + * page aligned. The user is not required to access through mmap regardless + * of the capabilities of the region mmap. + * The vendor driver should determine whether and how to partition the data + * section. The vendor driver should return data_offset accordingly. + * + * The sequence to be followed while in pre-copy state and stop-and-copy state + * is as follows: + * a. Read pending_bytes, indicating the start of a new iteration to get device + * data. Repeated read on pending_bytes at this stage should have no side + * effects. + * If pending_bytes == 0, the user application should not iterate to get data + * for that device. + * If pending_bytes > 0, perform the following steps. + * b. Read data_offset, indicating that the vendor driver should make data + * available through the data section. The vendor driver should return this + * read operation only after data is available from (region + data_offset) + * to (region + data_offset + data_size). + * c. Read data_size, which is the amount of data in bytes available through + * the migration region. + * Read on data_offset and data_size should return the offset and size of + * the current buffer if the user application reads data_offset and + * data_size more than once here. + * d. Read data_size bytes of data from (region + data_offset) from the + * migration region. + * e. Process the data. + * f. Read pending_bytes, which indicates that the data from the previous + * iteration has been read. If pending_bytes > 0, go to step b. + * + * The user application can transition from the _SAVING|_RUNNING + * (pre-copy state) to the _SAVING (stop-and-copy) state regardless of the + * number of pending bytes. The user application should iterate in _SAVING + * (stop-and-copy) until pending_bytes is 0. + * + * The sequence to be followed while _RESUMING device state is as follows: + * While data for this device is available, repeat the following steps: + * a. Read data_offset from where the user application should write data. + * b. Write migration data starting at the migration region + data_offset for + * the length determined by data_size from the migration source. + * c. Write data_size, which indicates to the vendor driver that data is + * written in the migration region. Vendor driver must return this write + * operations on consuming data. Vendor driver should apply the + * user-provided migration region data to the device resume state. + * + * If an error occurs during the above sequences, the vendor driver can return + * an error code for next read() or write() operation, which will terminate the + * loop. The user application should then take the next necessary action, for + * example, failing migration or terminating the user application. + * + * For the user application, data is opaque. The user application should write + * data in the same order as the data is received and the data should be of + * same transaction size at the source. + */ + +struct vfio_device_migration_info { + __u32 device_state; /* VFIO device state */ +#define VFIO_DEVICE_STATE_STOP (0) +#define VFIO_DEVICE_STATE_RUNNING (1 << 0) +#define VFIO_DEVICE_STATE_SAVING (1 << 1) +#define VFIO_DEVICE_STATE_RESUMING (1 << 2) +#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_RUNNING | \ + VFIO_DEVICE_STATE_SAVING | \ + VFIO_DEVICE_STATE_RESUMING) + +#define VFIO_DEVICE_STATE_VALID(state) \ + (state & VFIO_DEVICE_STATE_RESUMING ? \ + (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_RESUMING : 1) + +#define VFIO_DEVICE_STATE_IS_ERROR(state) \ + ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_SAVING | \ + VFIO_DEVICE_STATE_RESUMING)) + +#define VFIO_DEVICE_STATE_SET_ERROR(state) \ + ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_SATE_SAVING | \ + VFIO_DEVICE_STATE_RESUMING) + + __u32 reserved; + __u64 pending_bytes; + __u64 data_offset; + __u64 data_size; +}; /* * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped @@ -577,6 +807,7 @@ enum { enum { VFIO_CCW_IO_IRQ_INDEX, + VFIO_CCW_CRW_IRQ_INDEX, VFIO_CCW_NUM_IRQS }; @@ -785,6 +1016,29 @@ struct vfio_iommu_type1_info_cap_iova_range { struct vfio_iova_range iova_ranges[]; }; +/* + * The migration capability allows to report supported features for migration. + * + * The structures below define version 1 of this capability. + * + * The existence of this capability indicates that IOMMU kernel driver supports + * dirty page logging. + * + * pgsize_bitmap: Kernel driver returns bitmap of supported page sizes for dirty + * page logging. + * max_dirty_bitmap_size: Kernel driver returns maximum supported dirty bitmap + * size in bytes that can be used by user applications when getting the dirty + * bitmap. + */ +#define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION 1 + +struct vfio_iommu_type1_info_cap_migration { + struct vfio_info_cap_header header; + __u32 flags; + __u64 pgsize_bitmap; + __u64 max_dirty_bitmap_size; /* in bytes */ +}; + #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) /** @@ -805,6 +1059,12 @@ struct vfio_iommu_type1_dma_map { #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) +struct vfio_bitmap { + __u64 pgsize; /* page size for bitmap in bytes */ + __u64 size; /* in bytes */ + __u64 *data; /* one bit per page */ +}; + /** * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14, * struct vfio_dma_unmap) @@ -814,12 +1074,23 @@ struct vfio_iommu_type1_dma_map { * field. No guarantee is made to the user that arbitrary unmaps of iova * or size different from those used in the original mapping call will * succeed. + * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap + * before unmapping IO virtual addresses. When this flag is set, the user must + * provide a struct vfio_bitmap in data[]. User must provide zero-allocated + * memory via vfio_bitmap.data and its size in the vfio_bitmap.size field. + * A bit in the bitmap represents one page, of user provided page size in + * vfio_bitmap.pgsize field, consecutively starting from iova offset. Bit set + * indicates that the page at that offset from iova is dirty. A Bitmap of the + * pages in the range of unmapped size is returned in the user-provided + * vfio_bitmap.data. */ struct vfio_iommu_type1_dma_unmap { __u32 argsz; __u32 flags; +#define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0) __u64 iova; /* IO virtual address */ __u64 size; /* Size of mapping (bytes) */ + __u8 data[]; }; #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) @@ -831,6 +1102,57 @@ struct vfio_iommu_type1_dma_unmap { #define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15) #define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16) +/** + * VFIO_IOMMU_DIRTY_PAGES - _IOWR(VFIO_TYPE, VFIO_BASE + 17, + * struct vfio_iommu_type1_dirty_bitmap) + * IOCTL is used for dirty pages logging. + * Caller should set flag depending on which operation to perform, details as + * below: + * + * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_START flag set, instructs + * the IOMMU driver to log pages that are dirtied or potentially dirtied by + * the device; designed to be used when a migration is in progress. Dirty pages + * are logged until logging is disabled by user application by calling the IOCTL + * with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag. + * + * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag set, instructs + * the IOMMU driver to stop logging dirtied pages. + * + * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP flag set + * returns the dirty pages bitmap for IOMMU container for a given IOVA range. + * The user must specify the IOVA range and the pgsize through the structure + * vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface + * supports getting a bitmap of the smallest supported pgsize only and can be + * modified in future to get a bitmap of any specified supported pgsize. The + * user must provide a zeroed memory area for the bitmap memory and specify its + * size in bitmap.size. One bit is used to represent one page consecutively + * starting from iova offset. The user should provide page size in bitmap.pgsize + * field. A bit set in the bitmap indicates that the page at that offset from + * iova is dirty. The caller must set argsz to a value including the size of + * structure vfio_iommu_type1_dirty_bitmap_get, but excluding the size of the + * actual bitmap. If dirty pages logging is not enabled, an error will be + * returned. + * + * Only one of the flags _START, _STOP and _GET may be specified at a time. + * + */ +struct vfio_iommu_type1_dirty_bitmap { + __u32 argsz; + __u32 flags; +#define VFIO_IOMMU_DIRTY_PAGES_FLAG_START (1 << 0) +#define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP (1 << 1) +#define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP (1 << 2) + __u8 data[]; +}; + +struct vfio_iommu_type1_dirty_bitmap_get { + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of iova range */ + struct vfio_bitmap bitmap; +}; + +#define VFIO_IOMMU_DIRTY_PAGES _IO(VFIO_TYPE, VFIO_BASE + 17) + /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */ /*
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
