File 16172741-libvirt-guests-manpage.patch of Package libvirt.29155

Overview Repositories Revisions Requests Users Attributes Meta

File 16172741-libvirt-guests-manpage.patch of Package libvirt.29155

commit 161727417a91bdddf8f3167cf70c3de2829be81c
Author: Jim Fehlig <jfehlig@suse.com>
Date:   Fri Jan 7 14:35:10 2022 -0700

docs: Add man page for libvirt-guests
    
    Signed-off-by: Jim Fehlig <jfehlig@suse.com>
    Reviewed-by: Andrea Bolognani <abologna@redhat.com>

Index: libvirt-8.0.0/docs/manpages/index.rst
===================================================================
--- libvirt-8.0.0.orig/docs/manpages/index.rst
+++ libvirt-8.0.0/docs/manpages/index.rst
@@ -41,6 +41,7 @@ Tools
 * `virt-admin(1) <virt-admin.html>`__ - daemon administration interface
 * `virsh(1) <virsh.html>`__ - management user interface
 * `virt-qemu-run(1) <virt-qemu-run.html>`__ - run standalone QEMU instances
+* `libvirt-guests(8) <libvirt-guests.html>`__ - suspend/resume running libvirt guests
 
 Key codes
 =========
Index: libvirt-8.0.0/docs/manpages/libvirt-guests.rst
===================================================================
--- /dev/null
+++ libvirt-8.0.0/docs/manpages/libvirt-guests.rst
@@ -0,0 +1,151 @@
+==============
+libvirt-guests
+==============
+
+-------------------------------------
+suspend/resume running libvirt guests
+-------------------------------------
+
+:Manual section: 8
+:Manual group: Virtualization Support
+
+.. contents::
+
+SYNOPSIS
+========
+
+``libvirt-guests`` *COMMAND*
+
+
+DESCRIPTION
+===========
+
+``libvirt-guests`` is a service that can be used to coordinate guest and host
+lifecyle actions. By default, ``libvirt-guests`` will suspend running guests
+when the host shuts down, and restore them to their pre-shutdown state when
+the host reboots.
+
+``libvirt-guests`` is typically under control of systemd. When
+``libvirt-guests.service`` is enabled, systemd will call ``libvirt-guests``
+with the ``start`` *COMMAND* when the host boots. Conversely, systemd will call
+``libvirt-guests`` with the ``stop`` *COMMAND* when the host shuts down.
+
+``libvirt-guests`` can be used directly. In addition to the ``start`` and
+``stop`` *COMMAND*\s, it also supports ``status``, ``restart``, ``condrestart``,
+``try-restart``, ``reload``, ``force-reload``, ``gueststatus``, and
+``shutdown`` *COMMAND*\s.
+
+
+FILES
+=====
+
+``libvirt-guests`` defines several variables to control service behavior.
+The default vaule of these variables can be overridden in:
+
+* ``@SYSCONFDIR@/sysconfig/libvirt-guests``
+
+The following variables are supported:
+
+- URIS=default
+
+  URIs to check for running guests. Example:
+  ``URIS='default xen:///system xen+tcp://host/system lxc:///system'``
+
+- ON_BOOT=start
+
+  Action taken on host boot
+
+  * start
+
+    All guests which were running on shutdown are started on boot regardless
+    of their autostart settings
+
+  * ignore
+
+    ``libvirt-guests`` won't start any guest on boot, however, guests marked
+    as autostart will still be automatically started by libvirtd
+
+- START_DELAY=0
+
+  Number of seconds to wait between each guest start. Set to 0 to allow parallel
+  startup.
+
+- ON_SHUTDOWN=suspend
+
+  Action taken on host shutdown
+
+  * suspend
+
+    All running guests are suspended using virsh managedsave
+
+  * shutdown
+
+    All running guests are asked to shutdown. Please be careful with this
+    settings since there is no way to distinguish between a guest which is
+    stuck or ignores shutdown requests and a guest which just needs a long
+    time to shutdown. When setting ON_SHUTDOWN=shutdown, you must also set
+    SHUTDOWN_TIMEOUT to a value suitable for your guests.
+
+- PARALLEL_SHUTDOWN=0
+
+  Number of guests will be shutdown concurrently, taking effect when
+  "ON_SHUTDOWN" is set to "shutdown". If Set to 0, guests will be shutdown one
+  after another. Number of guests on shutdown at any time will not exceed number
+  set in this variable.
+
+- SHUTDOWN_TIMEOUT=300
+
+  Number of seconds we're willing to wait for a guest to shut down. If parallel
+  shutdown is enabled, this timeout applies as a timeout for shutting down all
+  guests on a single URI defined in the variable URIS. If this is 0, then there
+  is no time out (use with caution, as guests might not respond to a shutdown
+  request). The default value is 300 seconds (5 minutes).
+
+- BYPASS_CACHE=0
+
+  If non-zero, try to bypass the file system cache when saving and
+  restoring guests, even though this may give slower operation for
+  some file systems.
+
+- SYNC_TIME=0
+
+  If non-zero, try to sync guest time on domain resume. Be aware, that
+  this requires guest agent with support for time synchronization
+  running in the guest. By default, this functionality is turned off.
+
+
+BUGS
+====
+
+Please report all bugs you discover.  This should be done via either:
+
+#. the mailing list
+
+   `https://libvirt.org/contact.html <https://libvirt.org/contact.html>`_
+
+#. the bug tracker
+
+   `https://libvirt.org/bugs.html <https://libvirt.org/bugs.html>`_
+
+Alternatively, you may report bugs to your software distributor / vendor.
+
+
+AUTHORS
+=======
+
+Please refer to the AUTHORS file distributed with libvirt.
+
+
+LICENSE
+=======
+
+``libvirt-guests`` is distributed under the terms of the GNU LGPL v2.1+.
+This is free software; see the source for copying conditions. There
+is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
+PURPOSE
+
+
+SEE ALSO
+========
+
+libvirtd(8), `https://libvirt.org/ <https://libvirt.org/>`_
Index: libvirt-8.0.0/docs/manpages/meson.build
===================================================================
--- libvirt-8.0.0.orig/docs/manpages/meson.build
+++ libvirt-8.0.0/docs/manpages/meson.build
@@ -21,6 +21,7 @@ docs_man_files = [
   { 'name': 'virt-qemu-run', 'section': '1', 'install': conf.has('WITH_QEMU') },
   { 'name': 'virt-xml-validate', 'section': '1', 'install': true },
 
+  { 'name': 'libvirt-guests', 'section': '8', 'install': conf.has('WITH_LIBVIRTD') },
   { 'name': 'libvirtd', 'section': '8', 'install': conf.has('WITH_LIBVIRTD') },
   { 'name': 'virt-sanlock-cleanup', 'section': '8', 'install': conf.has('WITH_SANLOCK') },
   { 'name': 'virt-ssh-helper', 'section': '8', 'install': conf.has('WITH_LIBVIRTD') },
Index: libvirt-8.0.0/libvirt.spec.in
===================================================================
--- libvirt-8.0.0.orig/libvirt.spec.in
+++ libvirt-8.0.0/libvirt.spec.in
@@ -1694,6 +1694,7 @@ exit 0
 %{_mandir}/man1/virt-admin.1*
 %{_mandir}/man1/virt-host-validate.1*
 %{_mandir}/man8/virt-ssh-helper.8*
+%{_mandir}/man8/libvirt-guests.8*
 %{_mandir}/man8/libvirtd.8*
 %{_mandir}/man8/virtlogd.8*
 %{_mandir}/man8/virtlockd.8*
Index: libvirt-8.0.0/tools/libvirt-guests.service.in
===================================================================
--- libvirt-8.0.0.orig/tools/libvirt-guests.service.in
+++ libvirt-8.0.0/tools/libvirt-guests.service.in
@@ -6,7 +6,7 @@ After=network.target
 After=time-sync.target
 After=libvirtd.service
 After=virt-guest-shutdown.target
-Documentation=man:libvirtd(8)
+Documentation=man:libvirt-guests(8)
 Documentation=https://libvirt.org
 
 [Service]

Places

File 16172741-libvirt-guests-manpage.patch of Package libvirt.29155

Places