File sysconfig.dhcpd of Package dhcp.19307

Overview Repositories Revisions Requests Users Attributes Meta

File sysconfig.dhcpd of Package dhcp.19307

## Path: 	Network/DHCP/DHCP server
## Description: DHCPv4 server settings
## Type:	string
## Default:	""
## ServiceRestart: dhcpd
#
# Interface(s) for the DHCPv4 server to listen on.
# 
# A special keyword is ANY, it will cause dhcpd to autodetect available
# interfaces.
#
# Examples: DHCPD_INTERFACE="eth0 eth1 eth2"
#           DHCPD_INTERFACE="ANY"
#
DHCPD_INTERFACE=""

## Path: 	Network/DHCP/DHCP server
## Description: DHCPv6 server settings
## Type:	string
## Default:	""
## ServiceRestart: dhcpd6
#
# Interface(s) for the DHCPv6 server to listen on.
# 
# A special keyword is ANY, it will cause dhcpd to autodetect available
# interfaces.
#
# Examples: DHCPD6_INTERFACE="eth0 eth1 eth2"
#           DHCPD6_INTERFACE="ANY"
#
DHCPD6_INTERFACE=""

## Type:        list(yes,no,auto,)
## Default:     
## Description: Restart dhcpv4 server when interface goes up (again)
#
# When the dhcp server is listening on a virtual interface, e.g. bridge,
# bonding or vlan, and this interface gets deleted and recreated during
# a network restart, dhcpd will stop answering requests on this interface
# and needs a restart as well.
# Begining with SLE-10 SP3, we install an if-up.d post script (see ifup(8)
# and also ifservices(5)), enabled in auto mode by default. This variable
# can be used to force or avoid the dhcp server restart:
#
#   no:   do not restart dhcpd
#  yes:   force a dhcp server restart
# auto:   (default) restart for virtual interfaces (bond,bridge,vlan) when
#         all interfaces used in DHCPD_INTERFACE variable are up as well.
#
# Except of this global setting, the variable can be specified per interface
# in the interface configurations (/etc/sysconfig/network/ifcfg-$name).
#
DHCPD_IFUP_RESTART=""

## Type:        list(yes,no,auto,)
## Default:     
## Description: Restart dhcpv6 server when interface goes up (again)
#
# When the dhcp server is listening on a virtual interface, e.g. bridge,
# bonding or vlan, and this interface gets deleted and recreated during
# a network restart, dhcpd will stop answering requests on this interface
# and needs a restart as well.
# Begining with SLE-10 SP3, we install an if-up.d post script (see ifup(8)
# and also ifservices(5)), enabled in auto mode by default. This variable
# can be used to force or avoid the dhcp server restart:
#
#   no:   do not restart dhcpd
#  yes:   force a dhcp server restart
# auto:   (default) restart for virtual interfaces (bond,bridge,vlan) when
#         all interfaces used in DHCPD_INTERFACE variable are up as well.
#
# Except of this global setting, the variable can be specified per interface
# in the interface configurations (/etc/sysconfig/network/ifcfg-$name).
#
DHCPD6_IFUP_RESTART=""

## Type:	yesno
## Default:	yes
## ServiceRestart: dhcpd
#
# Shall the DHCP server dhcpd run in a chroot jail (/var/lib/dhcp)?
#
# Each time you start dhcpd with the init script, /etc/dhcpd.conf
# will be copied to /var/lib/dhcp/etc/.
# 
# Some files that are important for hostname to IP address resolution
# (/etc/{gai.conf,nsswitch.conf,resolv.conf,host.conf,hosts,localtime},
# /lib/lib{resolv.so.*,libnss_*.so.*,libpthread.so.0,libdl.so.2}) will
# also be copied to the chroot jail by the init script when you start
# it (less than 1MB altogether).
# 
# The pid file will be in /var/lib/dhcp/var/run/dhcpd.pid. 
#
DHCPD_RUN_CHROOTED="yes"

## Type:	yesno
## Default:	yes
## ServiceRestart: dhcpd6
#
# Shall the DHCP server dhcpd run in a chroot jail (/var/lib/dhcp6)?
#
# Each time you start dhcpd with the init script, /etc/dhcpd6.conf
# will be copied to /var/lib/dhcp6/etc/.
# 
# Some files that are important for hostname to IP address resolution
# (/etc/{gai.conf,nsswitch.conf,resolv.conf,host.conf,hosts,localtime},
# /lib/lib{resolv.so.*,libnss_*.so.*,libpthread.so.0,libdl.so.2}) will
# also be copied to the chroot jail by the init script when you start
# it (less than 1MB altogether).
# 
# The pid file will be in /var/lib/dhcp6/var/run/dhcpd.pid. 
#
DHCPD6_RUN_CHROOTED="yes"

## Type:	string
## Default:	"/etc/dhcpd.d"
## ServiceRestart: dhcpd
#
# Since version 3, dhcpd.conf can contain include statements. 
# If you enter the names of any include files here, _all_ conf
# files will be copied to $chroot/etc/, when dhcpd is started in the 
# chroot jail. (/etc/dhcpd.conf is always copied.)
#
# For your convenience, you can also specify entire directories,
# that will be copied inclusive subdirectories. The /etc/dhcpd.d
# directory will be copied by default when it exists.
#
# Example: "/etc/foo.bar.conf /etc/dhcpd.bootp-clients.conf"
#
DHCPD_CONF_INCLUDE_FILES="/etc/dhcpd.d"

## Type:	string
## Default:	"/etc/dhcpd.d"
## ServiceRestart: dhcpd6
#
# Since version 3, dhcpd.conf can contain include statements. 
# If you enter the names of any include files here, _all_ conf
# files will be copied to $chroot/etc/, when dhcpd is started in
# the chroot jail. (/etc/dhcpd6.conf is always copied.)
#
# For your convenience, you can also specify entire directories,
# that will be copied inclusive subdirectories. The /etc/dhcpd6.d
# directory will be copied by default when it exists.
#
# Example: "/etc/foo.bar.conf /etc/dhcpd6.bootp-clients.conf"
#
DHCPD6_CONF_INCLUDE_FILES="/etc/dhcpd6.d"

## Type:	string
## Default:	"dhcpd"
## ServiceRestart: dhcpd
#
# Leave empty or enter "root" to let dhcpd run as root. 
# Enter "dhcpd" to run dhcpd as user 'dhcpd'.
#
DHCPD_RUN_AS="dhcpd"

## Type:	string
## Default:	"dhcpd"
## ServiceRestart: dhcpd6
#
# Leave empty or enter "root" to let dhcpd run as root. 
# Enter "dhcpd" to run dhcpd as user 'dhcpd'.
#
DHCPD6_RUN_AS="dhcpd"

## Type:	string
## Default:	""
## ServiceRestart: dhcpd
#
# Other arguments that you want dhcpd to be started with
# (e.g. "-p 1234" for a non-standard port to listen on)
#
DHCPD_OTHER_ARGS=""

## Type:	string
## Default:	""
## ServiceRestart: dhcpd6
#
# Other arguments that you want dhcpd to be started with
# (e.g. "-p 1234" for a non-standard port to listen on)
#
DHCPD6_OTHER_ARGS=""

Places

File sysconfig.dhcpd of Package dhcp.19307

Places