File man-pages.changes of Package man-pages

Overview Repositories Revisions Requests Users Attributes Meta

File man-pages.changes of Package man-pages (Revision d8b2c83f16a5c90090e94b107fdd731f)

Currently displaying revision d8b2c83f16a5c90090e94b107fdd731f , Show latest

-------------------------------------------------------------------
Fri Jan 10 11:31:23 UTC 2020 - pgajdos@suse.com

- do not install man7/bpf-helpers.7 as it is already part of
  bpftool package

-------------------------------------------------------------------
Fri Jan 10 10:42:38 UTC 2020 - Ludwig Nussel <lnussel@suse.de>

- don't use alternatives for man.7, just move it to a different directory
  (boo#1160568)
- use packageand to supplement the documentation pattern instead of
  unconditionally hooking on man.

-------------------------------------------------------------------
Wed Dec  4 22:09:23 CET 2019 - Matej Cepl <mcepl@suse.com>

- Set up %{_mandir}/man7/man.7%{?ext_man} as an alternative for
  the man-page specific document. The other package providing
  this man page is mandoc, which is meant as an alternative
  lightweight faster replacement for man-pages package. It does
  not have that many dependencies, it is written in C, see
  http://mandoc.bsd.lv/ for more.

-------------------------------------------------------------------
Wed Nov 20 08:13:59 UTC 2019 - pgajdos@suse.com

- version update to 5.04
  * clone.2
        Document clone3()
  * wait.2
        Add P_PIDFD for waiting on a child referred to by a PID file descriptor
  * bpf-helpers.7
        Refresh against kernel v5.4-rc7
  * see Changes for other changes

-------------------------------------------------------------------
Fri Oct 25 07:39:55 UTC 2019 - pgajdos@suse.com

- tcp.7: correct documentation of tcp_fack, document tcp_recovery
- added patches
  [bsc#1154701]
  + man-pages-tcp_fack.patch

-------------------------------------------------------------------
Mon Oct 14 06:47:17 UTC 2019 - pgajdos@suse.com

- version update to 5.03
  * New and rewritten pages
    pidfd_open.2
    pidfd_send_signal.2
    pivot_root.2
    ipc_namespaces.7
    uts_namespaces.7
  * Newly documented interfaces in existing pages
    clone.2
        Document CLONE_PIDFD
    fanotify_mark.2
        Document FAN_MOVE_SELF
    ptrace.2
        Document PTRACE_GET_SYSCALL_INFO
    regex.3
        Document REG_STARTEND
  * see Changes for other changes

-------------------------------------------------------------------
Fri Aug  2 10:26:12 UTC 2019 - pgajdos@suse.com

- version update to 5.02
  * Newly documented interfaces in existing pages
    fanotify.7
    fanotify_init.2
    fanotify_mark.2
        Matthew Bobrowski  [Amir Goldstein, Jan Kara]
            Document FAN_REPORT_FID and directory modification events
    vdso.7
        Tobias Klauser  [Palmer Dabbelt]
            Document vDSO for RISCV
   * see Changes for more details

-------------------------------------------------------------------
Thu May  9 13:08:34 UTC 2019 - pgajdos@suse.com

- version update to 5.01
  * Newly documented interfaces in existing pages
    tsearch.3
      Document the twalk_r() function added in glibc 2.30
  * see Changes for more details

-------------------------------------------------------------------
Thu Mar  7 12:24:16 UTC 2019 - Petr Gajdos <pgajdos@suse.com>

- update to 5.00:
  * new or rewritten pages:
    s390_guarded_storage.2 
    address_families.7
    bpf-helpers.7
  * newly documented interfaces:
    fanotify_init.2
    fanotify.7
        Document FAN_REPORT_TID
            fanotify_init.2: add new flag FAN_REPORT_TID
            fanotify.7: update description of member pid in
                struct fanotify_event_metadata
        Document FAN_MARK_FILESYSTEM
            Monitor fanotify events on the entire filesystem.
        Document FAN_OPEN_EXEC and FAN_OPEN_EXEC_PERM
    io_submit.2
        Document IOCB_FLAG_IOPRIO
    msgctl.2
    semctl.2
    shmctl.2
        Document STAT_ANY commands
    prctl.2
        Document PR_SET_SPECULATION_CTRL and PR_GET_SPECULATION_CTRL
    sched_setattr.2
        Document SCHED_FLAG_DL_OVERRUN and SCHED_FLAG_RECLAIM
    socket.2
        Document AF_XDP
            Document AF_XDP added in Linux 4.18.
    inotify.7
        Document IN_MASK_CREATE
    unix.7
        Document SO_PASSSEC
        Document SCM_SECURITY ancillary data

-------------------------------------------------------------------
Fri Jan  4 13:09:01 UTC 2019 - Petr Gajdos <pgajdos@suse.com>

- supplements man [bsc#1116987]

-------------------------------------------------------------------
Fri May  4 08:13:02 UTC 2018 - pgajdos@suse.com

- update to 4.16:
  * new and rewritten pages:
    s390_sthyi.2, network_namespaces.7, vsock.7
  * newly documented interfaces:
    cgroups.7
        Document cgroups v2 "thread mode"
        Document cgroup v2 delegation via the 'nsdelegate' mount 
                 option
        Document the cgroup.max.depth and cgroup.max.descendants
                 files
        Document 'release_agent' mount option
        Document /sys/kernel/cgroup/delegate
        Document /sys/kernel/cgroup/features
        Document cgroups v2 cgroup.stat file
    membarrier.2
        Document new membarrier commands introduced in Linux 4.16
            Document the following membarrier commands introduced
            in Linux 4.16:
                MEMBARRIER_CMD_GLOBAL_EXPEDITED
                MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED
                MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE
                MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE
    mmap.2
        Add description of MAP_SHARED_VALIDATE and MAP_SYNC
        Document new MAP_FIXED_NOREPLACE flag
            4.17+ kernels offer a new MAP_FIXED_NOREPLACE flag which
            allows the caller to atomically probe for a given address
            range.
    readv.2
    io_submit.2
        Document RWF_APPEND added in Linux 4.16
    capabilities.7
        Describe file capability versioning
        Document namespaced-file capabilities
- see Changes and Changes.old for detailed upstream change log

-------------------------------------------------------------------
Mon Nov 27 07:50:13 UTC 2017 - pgajdos@suse.com

- update to 4.14:
  * new or rewritten pages:
    pthread_spin_init.3, pthread_spin_lock.3, smartpqi.4,
    veth.4
  * removed pages: 
    infnan.3
- see Changes for detailed upstream change log

-------------------------------------------------------------------
Fri Sep 15 16:04:29 UTC 2017 - pgajdos@suse.com

- update to 4.13:
  see Changes for upstream change log

-------------------------------------------------------------------
Mon Aug  7 07:34:39 UTC 2017 - pgajdos@suse.com

- update to 4.12:
  * Newly documented interfaces in existing page
      namespaces.7
        Document the /proc/[pid]/ns/pid_for_children file
  * see Changes for details

-------------------------------------------------------------------
Fri May  5 06:31:01 UTC 2017 - pgajdos@suse.com

- update to 4.11:
  * New and rewritten pages
    ioctl_userfaultfd.2
    statx.2
    userfaultfd.2
    pthread_atfork.3
    slabinfo.5
    inode.7
  * Renamed pages
    ioctl_console.2 (from console_ioctl.4)
    ioctl_tty.2 (from tty_ioctl.4)
  * Newly documented interfaces in existing page
     ioctl_ns.2
        Document the NS_GET_NSTYPE operation added in Linux 4.11
        Document the NS_GET_OWNER_UID operation added in Linux 4.11
     proc.5
        Document /proc/sys/kernel/sched_child_runs_first
  * see Changes for details; for 4.10 changes, see Changes.old
  * do not package explicit_bzero.3 .so link to bzero.3

-------------------------------------------------------------------
Mon Dec 12 11:46:06 UTC 2016 - pgajdos@suse.com

- update to 4.09:
  * New and rewritten pages
    pkey_alloc.2
    pthread_getattr_default_np.3
    strfromd.3
    fuse.4
    tmpfs.5
    pkeys.7
    random.7
    sock_diag.7
    close.2
    getpriority.2
    nice.2
    timer_create.2
    timerfd_create.2
    random.4
    elf.5
    proc.5
    sched.7
  * Newly documented interfaces in existing pages
    mmap.2
        Add (much) more detail on MAP_GROWSDOWN
    mprotect.2
        Document the new pkey_mprotect() system call
        Document PROT_SEM, PROT_SAO, PROT_GROWSUP, and PROT_GROWSDOWN
    prctl.2
        Document PR_SET_FP_MODE and PR_GET_FP_MODE
    perf_event_open.2
        PERF_RECORD_SWITCH support
        Add PERF_SAMPLE_BRANCH_CALL branch sample type
        PERF_SAMPLE_BRANCH_IND_JUMP branch_sample_type
        Document PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT
        Document sample_max_stack and /proc/sys/kernel/perf_event_max_stack
        PERF_RECORD_LOST_SAMPLES record type
    ptrace.2
        Document PTRACE_SECCOMP_GET_FILTER
        Document PTRACE_GET_THREAD_AREA and PTRACE_SET_THREAD_AREA
    namespaces.7
        Document the NS_GET_USERNS and NS_GET_PARENT ioctl() operations
    sched.7
        Document the autogroup feature
        Autogrouping breaks traditional semantics of nice in many cases
    Michael Kerrisk
        Add a subsection on nice value and group scheduling

-------------------------------------------------------------------
Mon Oct 10 06:38:59 UTC 2016 - pgajdos@suse.com

- update to 4.08:
  * New and rewritten pages
    quotactl.2
    bswap.3
    cgroups.7
  * Newly documented interfaces in existing pages
    readv.2
        Document the pwritev2() RWF_SYNC  and RWF_DSYNC flags
    proc.5
        Document /proc/PID/seccomp
        Document /proc/[pid]/task/[tid]/children
            Document the /proc/[pid]/task/[tid]/children interface from
            CRIU, and more importantly, document why it's usually not
            a good interface.

-------------------------------------------------------------------
Mon Aug  1 07:37:35 UTC 2016 - pgajdos@suse.com

- update to 4.07:
  * New and rewritten pages
    ioctl_fideduperange.2
    ioctl_ficlonerange.2
    nextup.3
    mount_namespaces.7
  * Newly documented interfaces in existing pages
    mount.2
        Document flags used to set propagation type
            Document MS_SHARED, MS_PRIVATE, MS_SLAVE, and MS_UNBINDABLE.
        Document the MS_REC flag
    ptrace.2
        Document ptrace access modes
    proc.5
        Document /proc/[pid]/timerslack_ns
        Document /proc/PID/status 'Ngid' field
        Document /proc/PID/status fields: 'NStgid', 'NSpid', 'NSpgid', 'NSsid'
        Document /proc/PID/status 'Umask' field

-------------------------------------------------------------------
Wed May 11 07:19:18 UTC 2016 - pgajdos@suse.com

- update to 4.06:
  * New and rewritten pages
    cgroups.7
    cgroup_namespaces.7
  * Newly documented interfaces in existing pages
    clone.2
        Document CLONE_NEWCGROUP
    readv.2
        Document preadv2() and pwritev2()
    setns.2
        Document CLONE_NEWCGROUP
    unshare.2
        Document CLONE_NEWCGROUP

-------------------------------------------------------------------
Tue Mar 15 09:11:08 UTC 2016 - pgajdos@suse.com

- update to 4.05:
  * new and rewritten pages
    + copy_file_range.2
    + personality.2
    + fmemopen.3
    + ntp_gettime.3
    + open_memstream.3
    + posix_spawn.3
    + readdir.3
    + readdir_r.3
    + lirc.4
  * newly documented interfaces in existing pages
    + adjtimex.2
        Document ntp_adjtime(3)
    + epoll_ctl.2
        Document EPOLLEXCLUSIVE
    + madvise.2
        Document MADV_FREE
    + +proc.5
        Document CmaTotal and CmaFree fields of /proc/meminfo
        Document additional /proc/meminfo fields
            Document DirectMap4k, DirectMap4M, DirectMap2M, DirectMap1G
        Document MemAvailable /proc/meminfo field
        Document inotify /proc/PID/fdinfo entries
        Document fanotify /proc/PID/fdinfo entries
        Add some kernel version numbers for /proc/PID/fdinfo entries
        /proc/PID/fdinfo displays the setting of the close-on-exec flag
    socket.7
        Document some BPF-related socket options
- removed upstreamed patches
  * man-pages-adjtimex.2.patch
  * man-pages-open-btrfs.patch

-------------------------------------------------------------------
Mon Feb 22 09:12:24 UTC 2016 - pgajdos@suse.com

- open.2: O_TMPFILE support was added to btrfs [bsc#967488]
  + man-pages-open-btrfs.patch

-------------------------------------------------------------------
Mon Jan  4 07:30:01 UTC 2016 - pgajdos@suse.com

- update to 4.04:
  * new and rewritten pages
    + futex.2
       Rewrite and massively expand page
    + membarrier.2
       New page documenting membarrier() system call
  * newly documented interfaces in existing pages
    + mlock.2
       Document mlock2(2) and MCL_ONFAULT

-------------------------------------------------------------------
Mon Dec  7 07:22:59 UTC 2015 - pgajdos@suse.com

- update to 4.03:
  - newly documented interfaces in existing pages
    *  perf_event_open.2
        4.1 adds AUX sample support
        4.1 data_offset and data_size fields
        Document aux_{head,tail,offset,size} support
        4.0 update rdpmc documentation
        4.1 adds PERF_RECORD_ITRACE_START
        Document 4.1 clockid support
        4.1 PERF_EVENT_IOC_SET_BPF support
        4.1 adds AUX_FLAG_OVERWRITE support
        4.1 PERF_SAMPLE_BRANCH_CALL_STACK
        4.1 adds aux_watermark
        Add possibility of EBUSY error
    * prctl.2
        Document operations for ambient capabilities
        Rework PR_CAP_AMBIENT text
        Note that arg4 and arg5 must be zero for CAP_AMBIENT
        RETURN VALUE: Add PR_CAP_AMBIENT + PR_CAP_AMBIENT_IS_SET case
        ERRORS: document PR_CAP_AMBIENT error cases
    * __ppc_set_ppr_med.3
        Document PPC functions providing access to PPR
            GNU C Library commit 1747fcda4902a3b46183d93fb16ed9b436b2608b
            extends the priorities that can be set to the Program Priority
            Register (PPR), with the functions: __ppc_set_ppr_very_low(3)
            and __ppc_set_ppr_med_high(3).
    * capabilities.7
        Document ambient capabilities
        Various additions and reworkings for ambient capability text

-------------------------------------------------------------------
Mon Aug 10 07:00:09 UTC 2015 - pgajdos@suse.com

- update to 4.02:
  - new and rewritten pages
    * dladdr.3
    * dlerror.3
    * dlinfo.3
    * dlopen.3
    * dlsysm.3
  - newly documented interfaces in existing pages
    * dlopen.3
        Document dlmopen(3)
    * nl_langinfo.3
        Add documentation for nl_langinfo_l(3)
    * __ppc_set_ppr_med.3
        Document PPC functions providing access to PPR
    * __ppc_yield.3
        Document PPC performance-hint functions

-------------------------------------------------------------------
Mon Jul 27 06:40:42 UTC 2015 - pgajdos@suse.com

- update to 4.01:
  - new and rewritten pages
    * bpf.2
    * __ppc_get_timebase.3
    * queue.3
  - newly documented interfaces in existing pages
    * rename.2
         Document RENAME_WHITEOUT

-------------------------------------------------------------------
Thu May  7 11:29:38 UTC 2015 - pgajdos@suse.com

- update to 4.00:
  - new and rewritten pages
    * get_phys_pages.3
    * loop.4
    * xattr.7
  - newly documented interfaces in existing pages
    * mmap.2
        Document MAP_HUGE_2MB, MAP_HUGE_1GB, and MAP_HUGE_SHIFT
    * shmget.2
        Document SHM_HUGE_2MB, SHM_HUGE_1GB, and SHM_HUGE_SHIFT
    * resolver.3
        Add descriptions of some other resolver functions
            Add res_ninit(), res_nquery(), res_nsearch(),
            and res_nquerydomain(), res_nmkquery(), res_nsend().
    * tty_ioctl.4
        Document TIOCMIWAIT and TIOCGICOUNT
        Document TIOCGEXCL
        Document TIOGCPKT
        Document TIOCSPTLCK
        Document TIOCGPTLCK

-------------------------------------------------------------------
Mon Apr 20 07:37:12 UTC 2015 - pgajdos@suse.com

- update to 3.83:
  - new and rewritten pages
    * posix_madvise.3
    * ftw.3
  - newly documented interfaces in existing pages
    * getdents.2
        Document getdents64()
    * mount.2
        Document MS_LAZYTIME
    * proc.5
        Document /proc/sys/kernel/randomize_va_space
        Document /proc/PID/fdinfo epoll format
        Describe /proc/PID/fdinfo eventfd format
        Document /proc/PID/fdinfo signalfd format

-------------------------------------------------------------------
Tue Mar 31 07:22:31 UTC 2015 - pgajdos@suse.com

- update to 3.82:
  - new and rewritten pages
     * nptl.7
  - newly documented interfaces in existing pages
     * user_namespaces.7
       Document /proc/[pid]/setgroups

-------------------------------------------------------------------
Mon Mar  2 19:39:09 UTC 2015 - pgajdos@suse.com

- update to 3.81:
  - new and rewritten pages
     * attributes.7
  - global changes
     * Reformat existing thread-safety information to use a
       tabular format, rather than plain text.

-------------------------------------------------------------------
Mon Feb 23 07:38:42 UTC 2015 - pgajdos@suse.com

- update to 3.80:
  - new and rewritten pages
    * ioctl_fat.2, madvise.2
  - newly documented interfaces in existing pages
    * proc.5
        (Briefly) document /proc/PID/attr/socketcreate
        (Briefly) document /proc/PID/attr/keycreate
        Document /proc/PID/attr/{current,exec,fscreate,prev}
        Document /proc/sys/kernel/auto_msgmni
    * socket.7
        Document SO_REUSEPORT socket option

-------------------------------------------------------------------
Mon Feb  2 09:05:48 UTC 2015 - pgajdos@suse.com

- update to 3.79:
  - new and rewritten pages
    * getrandom.2, kexec_load.2
  - etc., see Changes for details

-------------------------------------------------------------------
Fri Jan 23 09:55:10 UTC 2015 - pgajdos@suse.com

- update to 3.78:
  - new and rewritten pages
    * execveat.2, memfd_create.2, s390_pci_mmio_write.2
  - newly documented interfaces in existing pages
    * fcntl.2:
        Document F_ADD_SEALS and F_GET_SEALS commands
    * proc.5:
        Document /proc/sys/vm/compact_memory
        Document /proc/sys/fs/nr_open
  - etc. see Changes for details

-------------------------------------------------------------------
Thu Jan 15 13:24:18 UTC 2015 - pgajdos@suse.com

- add info to return value of adjtimex() [bnc#910082](internal)
  + man-pages-adjtimex.2.patch

-------------------------------------------------------------------
Mon Jan 12 10:14:56 UTC 2015 - pgajdos@suse.com

- update to 3.77:
  - new or rewritten pages:
    * seccomp.2
  - newly documented interfaces in existing pages
    * netlink.7:
        Add NETLINK_CRYPTO

-------------------------------------------------------------------
Fri Jan  2 08:31:37 UTC 2015 - pgajdos@suse.com

- update to 3.76:
  - new and rewritten pages
    * adjtimex.2, sigreturn.2
  - newly documented interfaces in existing pages
    * proc.5
        Document /proc/thread-self
        Document "VmSwap" field of /proc/[pid]/status
        Document /proc/net/netfilter/nfnetlink_queue

-------------------------------------------------------------------
Thu Oct 16 11:05:11 UTC 2014 - pgajdos@suse.com

- update to 3.75:
  - new and rewritten pages
    * pthread_rwlockattr_setkind_np.3
  - see Changes for details

-------------------------------------------------------------------
Mon Oct 13 07:40:36 UTC 2014 - pgajdos@suse.com

- remove ioctl_list (2) reference from ioctl.2 man page [bnc#900141]
  * man-pages-remove-ioctl_list-reference.patch

-------------------------------------------------------------------
Tue Oct  7 07:46:17 UTC 2014 - pgajdos@suse.com

- update to 3.74:
  - new and rewritten pages
    * pldd.1, cp1252.7
  - newly documented interfaces in existing pages
    * mq_overview.7: /proc/sys/fs/mqueue/msgsize_default
                     /proc/sys/fs/mqueue/msg_default

-------------------------------------------------------------------
Mon Sep 22 06:02:23 UTC 2014 - pgajdos@suse.com

- update to 3.73:
  - new and rewritten pages
    * namespaces.7, pid_namespaces.7, user_namespaces.7
  - newly documented interfaces in existing pages
    * clone.2: Document CLONE_NEWUSER for creating a new user namespace
    * setns.2: Document the PID, user, and mount namespace support
    * unshare.2: Document CLONE_NEWPID, CLONE_NEWUSER, CLONE_THREAD, 
                 CLONE_SIGHAND, and CLONE_VM
  - see Changes for details

-------------------------------------------------------------------
Tue Sep  9 08:03:34 UTC 2014 - pgajdos@suse.com

- update to 3.72:
  - new and rewritten pages:
    * memusage.1, memusagestat.1, mtrace.1
   see Changes for details

-------------------------------------------------------------------
Tue Aug 19 22:40:54 UTC 2014 - andreas.stieger@gmx.de

- man-pages 3.71:
  - new and rewritten pages:
    * group_member.3
    * isfdtype.3
  - see Changes for details

-------------------------------------------------------------------
Thu Jul 17 09:20:25 UTC 2014 - pgajdos@suse.com

- update to 3.70:
  - new and rewritten pages:
    * sprof.1
  - newly documented interfaces in existing pages
    * epoll_ctl.2: EPOLLWAKEUP
    * epoll.7: EPOLLWAKEUP
  - see Changes for details

-------------------------------------------------------------------
Mon Jun 23 12:12:11 UTC 2014 - pgajdos@suse.com

- ship localedef.1, iconvconfig.8 and locale.1 as they will
  be removed from glibc package

-------------------------------------------------------------------
Wed Jun 18 13:38:01 UTC 2014 - pgajdos@suse.com

- cleanup removing man-pages
- ship time.1 again [bnc#878057]
- do not ship localedef.1 and (really do not ship) iconvconfig.8
  for now, but requested removal from glibc package

-------------------------------------------------------------------
Mon Jun 16 05:01:42 UTC 2014 - pgajdos@suse.com

- removed upstreamed man-pages-bootparam.7.patch (obsoleted by
  last update)

-------------------------------------------------------------------
Sat Jun 14 22:04:41 UTC 2014 - andreas.stieger@gmx.de

- update to 3.69:
  - new and rewritten pages:
    * iconv.1 New page for the iconv(1) command
  - Newly documented interfaces in existing pages
   * fcntl.2 Document open file description locks
- refresh man-pages-bootparam.7.patch for context changes
- Further updates to individual pages, see Changes for details
- do not install iconvconfig.8 to prevent conflict with glibc

-------------------------------------------------------------------
Fri May 30 06:28:20 UTC 2014 - pgajdos@suse.com

- updated to 3.68
  * many fixes in existing manpages
  * new page: localedef.1

-------------------------------------------------------------------
Wed May 28 11:59:19 UTC 2014 - pgajdos@suse.com

- document rootflags and rootdelay parameters [bnc#874149]
  * added man-pages-bootparam.7.patch

-------------------------------------------------------------------
Wed May 21 20:14:14 UTC 2014 - andreas.stieger@gmx.de

- man-pages 3.67
- New and rewitten pages
  - sched_setattr.2
  - system.3
- Newly documented interfaces in existing pages
  - sched.7 Document SCHED_DEADLINE
- New and changed links
  - renameat2.2 -> rename.2
  - sched_getattr.2 -> sched_setattr.
- Further updates to individual pages, see Changes for details

-------------------------------------------------------------------
Mon May 12 10:50:46 UTC 2014 - pgajdos@suse.com

- removed obsoleted man-pages-addons

-------------------------------------------------------------------
Thu May  8 22:35:13 UTC 2014 - andreas.stieger@gmx.de

- man-pages 3.66
- New and rewritten pages:
  fanotify_init.2
  fanotify_mark.2
  sched_setscheduler.2
  fanotify.7
  sched.7
- Newly documented interfaces in existing pages:
  * fallocate.2 FALLOC_FL_ZERO_RANGE
  * rename.2 renameat2()
  * shmop.2 SHM_EXEC
- Further updates to individual pages, see Changes for details

-------------------------------------------------------------------
Tue Apr 22 07:15:29 UTC 2014 - pgajdos@suse.com

- update to version 3.65:
  * new and rewritten pages: 
     inet_net_pton.3
  * newly documented interfaces in existing pages
     fallocate.2: Document FALLOC_FL_COLLAPSE_RANGE
     prctl.2: Document PR_SET_THP_DISABLE and PR_GET_THP_DISABLE
     proc.5: Document /proc/[pid]/stack
             Document /proc/[pid]/clear_refs
- dropped proc.5.patch (upstreamed)

-------------------------------------------------------------------
Wed Apr 16 06:35:18 UTC 2014 - pgajdos@suse.com

- package getent.1 [bnc#873645]

-------------------------------------------------------------------
Fri Apr 11 09:20:11 UTC 2014 - pgajdos@suse.com

- complete description of /proc/[pid]/smaps fields 
  *  [bnc#782157] (internal)
  * added proc.5.patch

-------------------------------------------------------------------
Mon Apr  7 06:32:28 UTC 2014 - pgajdos@suse.com

- update to version 3.64:
  * new and rewritten pages: 
     + open_by_handle_at.2 
     +inotify.7
  * newly documented interfaces in existing pages:
     + PERF_FLAG_FD_CLOEXEC flag (perf_event_open.2)
     + Document _LARGEFILE_SOURCE (feature_test_macros.7) 
  * see Changes for details

-------------------------------------------------------------------
Wed Mar 19 06:23:20 UTC 2014 - pgajdos@suse.com

- update to version 3.63:
  * new and rewritten pages:
    - duplocale.3, newlocale.3, towlower.3, towupper.3, uselocale.3
  * for more information, see Changes

-------------------------------------------------------------------
Sat Mar 15 11:27:14 UTC 2014 - andreas.stieger@gmx.de

- update to version 3.62:
  * Newly documented interfaces in existing pages
    + locale.5 Document LC_*
  * Further updates to invidivial pages, see Changes for details
- new page locale.1 owned by glibc, not installing

-------------------------------------------------------------------
Thu Feb 27 07:20:42 UTC 2014 - pgajdos@suse.com

- update to version 3.61:
  * added notes on thread-safety to various manual pages
  * see Changes for details

-------------------------------------------------------------------
Tue Feb 18 14:45:24 UTC 2014 - pgajdos@suse.com

- update to version 3.60:
  * bugfix previous change

-------------------------------------------------------------------
Mon Feb 17 18:55:32 UTC 2014 - andreas.stieger@gmx.de

- man-pages 3.59:
  * Convert pages contain non-ASCII in source code comments to use
    UTF-8

-------------------------------------------------------------------
Mon Feb 17 07:37:43 UTC 2014 - pgajdos@suse.com

- update to version 3.58
  * Document the pipe2() O_DIRECT
  * Document PACKET_QDISC_BYPASS 
  * etc. see Changes for details

-------------------------------------------------------------------
Sat Jan 25 15:29:02 UTC 2014 - jengelh@inai.de

- Update to new upstream release 3.57
* The open(2) manual page adds documentation of the O_TMPFILE flag,
  which provides a race-free method of creating unnamed temporary
  files.
* Documentation for the PTRACE_PEEKSIGINFO, PTRACE_GETSIGMASK, and
  PTRACE_SETSIGMASK operations was added  to the ptrace(2) page
* Documentation for the SO_BUSY_POLL socket option to the socket(7)
  page.
* Documentation for the TCP_USER_TIMEOUT and TCP_CONGESTION socket
  options to the tcp(7) page.
- Feed specfile through formatter; kill redundant %clean section;
  %fdupes ought not to be called across directories that potentially
  live across standard partitions

-------------------------------------------------------------------
Sun Jan 12 12:51:44 UTC 2014 - andreas.stieger@gmx.de

- update to version 3.56:
- New and rewritten pages:
  * fgetc.3, gets.3, vdso.7
- Newly documented interfaces in existing pages:
  * reboot.2 LINUX_REBOOT_SW_SUSPEND
- Further updates and global changes listed in changelog:
  http://git.kernel.org/cgit/docs/man-pages/man-pages.git/tree/Changes?id=man-pages-3.56
- switch to upstream xz archive

-------------------------------------------------------------------
Mon Jan  6 23:36:22 UTC 2014 - andreas.stieger@gmx.de

- fix conflict with time(1) from package time
- remove update.sh, get_version_number.sh packaging scripts

-------------------------------------------------------------------
Sat Jan  4 19:14:15 UTC 2014 - andreas.stieger@gmx.de

- update to version 3.55
  with a large number of new and updated manual pages as listed in
  http://git.kernel.org/cgit/docs/man-pages/man-pages.git/tree/Changes?id=man-pages-3.55
- includes changes from version 3.54
  with a large number of new and updated manual pages as listed in
  http://git.kernel.org/cgit/docs/man-pages/man-pages.git/tree/Changes?id=man-pages-3.54
- packaging changes:
  * add source URL, see https://en.opensuse.org/SourceUrls

-------------------------------------------------------------------
Wed Aug  7 10:31:34 CEST 2013 - pgajdos@suse.cz

- update to version 3.53
  * New and rewritten pages
      restart_syscall.2
        New page for restart_syscall(2) system call
  * Newly documented interfaces in existing pages
      fchownat.2
        Document AT_EMPTY_PATH
      fstatat.2
        Document AT_EMPTY_PATH
      linkat.2
        Document AT_EMPTY_PATH
      open.2
        Document O_PATH
            See also https://bugzilla.redhat.com/show_bug.cgi?id=885740
  * Changes to individual pages
      clock_nanosleep.2
      futex.2
      nanosleep.2
      poll.2
      sigaction.2
      sigreturn.2
      signal.7
        SEE ALSO: add restart_syscall(2)
      open.2
        Remove warning that O_DIRECTORY is only for use with opendir(3)
            O_DIRECTORY can also be used with, for example, O_PATH.
      perf_event_open.2
        Improve PERF_SAMPLE_BRANCH_STACK documentation
        Fix indentation of the MMAP layout section
            The indentation of the MMAP layout section wasn't quite right.
            I think this improves things but I admit I'm not an expert at the
            low-level indentation directives.
        Update PERF_IOC_FLAG_GROUP info
            It turns out PERF_IOC_FLAG_GROUP was broken from 75f937f24bd9
            (in Linux 2.6.31, the initial perf_event release) until
            724b6daa1 (Linux 3.4).
            I've done some extensive kernel source code digging plus
            running tests of various kernels and I hope the info
            presented is accurate now.
            (Patch edited somewhat by mtk.)
        Improve sysfs files documentation
            This improves the documentation of the various
            perf_event_open()-related sysfs files.
      ptrace.2
        If SEIZE was used, initial auto-attach stop is EVENT_STOP
            For every PTRACE_O_TRACEfoo option, mention that old-style SIGSTOP
            is replaced by PTRACE_EVENT_STOP if PTRACE_SEIZE attach was used.
            Mention the same thing again in the description of
            PTRACE_EVENT_STOP.
        Mention that PTRACE_PEEK* libc API and kernel API are different
        Clarify PTRACE_INTERRUPT, PTRACE_LISTEN, and group-stop behavior
      readlink.2
        Document use of empty 'pathname' argument
        Change error check in example program from "< 0" to "== -1"
      setpgid.2
        s/SIGTSTP/SIGTTIN/ when discussing reads from terminal
            See https://bugzilla.kernel.org/show_bug.cgi?id=60504
      clog2.3
        Note that these functions are still not present in glibc 2.17
      dirfd.3
        ATTRIBUTES: Note function that is thread-safe
            The function dirfd() is thread safe.
      div.3
        ATTRIBUTES: Note functions that are thread-safe
            The functions div(), ldiv(), lldiv() and imaxdiv() are thread
            safe.
      fabs.3
        ATTRIBUTES: Note functions that are thread-safe
            The functions fabs(), fabsf() and fabsl() are thread safe.
      fdim.3
        ATTRIBUTES: Note functions that are thread-safe
            The functions fdim(), fdimf() and fdiml() are thread safe.
      fflush.3
        ATTRIBUTES: Note function that is thread-safe
            The function fflush() is thread safe.
      finite.3
        ATTRIBUTES: Note functions that are thread-safe
            The functions finite(), finitef(), finitel(), isinf(), isinff(),
            isinfl(), isnan(), isnanf() and isnanl() are thread safe.
      flockfile.3
        ATTRIBUTES: Note functions that are thread-safe
            The functions flockfile(), ftrylockfile() and funlockfile() are
            thread safe.
      floor.3
        ATTRIBUTES: Note functions that are thread-safe
            The functions floor(), floorf() and floorl() are thread safe.
      resolv.conf.5
        Explain how to set empty domain
            See http://bugs.debian.org/463575
      capabilities.7
        Add open_by_handle_at(2) under CAP_DAC_READ_SEARCH
      inotify.7
        Clarify description of IN_MOVED_FROM and IN_MOVED_TO
      man-pages.7
        DESCRIPTION should note versions for new interface features or behavior
      udp.7
        Add missing #include directive
            Using the UDP_CORK socket option documented in udp.7 requires
            including <netinet/udp.h>.
      ld.so.8
        Rework rpath token expansion text
        Describe $PLATFORM rpath token
        Describe $LIB rpath token
        Document LD_BIND_NOT
        Add reference to pthreads(7) in discussion of LD_ASSUME_KERNEL
      readlink.2
        Fix possible race condition in readlink.2 example
            I noticed that the example in the readlink.2 man pages does error
            checking for a race condition that would cause the value of the
            symbolic link to get larger.  However, it doesn't handle the
            opposite case, in which the value gets shorter.  (The NULL
            terminator is always set at the old, longer offset.)  This could
            cause the program to operate on uninitialized data.
- removed source gai.conf.5 as upstream provides it yet
- added fanotify_init.2, fanotify_mark.2, open_by_handle_at.2, 
  name_to_handle_at.2

-------------------------------------------------------------------
Mon Jul 15 13:28:05 CEST 2013 - pgajdos@suse.cz

- update to version 3.52
  * Various pages that formerly lacked the information now have 
    a note under RETURN VALUE that errno is set on error.
  * Peng Haitao has submitted patches to around 50 pages that note 
    functions that are thread-safe or thread-unsafe. For this 
    purpose, the man-pages add a new section, ATTRIBUTES, as 
    described in the man-pages(7) manual page. Peng Haitao's 
    substantial work is ongoing, and more pages will add this 
    information in the future.

-------------------------------------------------------------------
Thu May  2 10:14:33 CEST 2013 - pgajdos@suse.cz

- update to version 3.51
  * Newly documented interfaces in existing pages
      sched_rr_get_interval.2
        Document /proc/sys/kernel/sched_rr_timeslice_ms
      proc.5
        Document /proc/[pid]/map_files directory
            This directory was added in Linux v3.3 and provides info about
            files being mmap-ed in a way very similar to how /proc/[pid]/fd
            works.
            v2: Added examples of how links look like and noted dependency
            on kernel config option CONFIG_CHECKPOINT_RESTORE.
        Document /proc/sys/kernel/shm_rmid_forced
      capabilities.7
        Document /proc/sys/kernel/cap_last_cap
  * Global changes
  * Various pages
        Global fix: fix placement of word "only"
  * Various pages
        License headers: consistent format
  * Various pages
        Global fix: s/since kernel/since Linux/
  * Various System V IPC pages in Section 2
        Add "System V" to .TH line and text
            Make it clear that these pages relate to System V IPC,
            not POSIX IPC.
  * Changes to individual pages
      access.2
        Clarify RETURN VALUE for F_OK
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=705293
      alarm.2
        Correct the description of behavior when 'seconds' is 0
      clone.2
        Add prototype for syscall to SYNOPSIS
            And further clarify the distinction between the system call
            and the wrapper function in the introductory text.
        Update feature test macro requirements
            The requirements quietly changed changed in glibc 2.14
            See also http://www.sourceware.org/bugzilla/show_bug.cgi?id=4749
        Clarify differences between clone2() syscall and wrapper function
        Note those architectures where the sys_clone argument order differs
        Add short subsection noting that blackfin, m68k, and sparc are different
        Move clone2() text to subsection in description
            The description of ia64 clone2() should follow the discussion
            of the raw system call interface.
        Change subhead for ia64 discussion
      getcpu.2
        Recommend that 'tcache' should be specified as NULL nowadays
      io_cancel.2
        Improve description
      io_destroy.2
        Improve description
            The description was rather vague, citing a "list of I/O contexts"
            and stating that it "can" cancel outstanding requests.  This
            update makes things more concrete so that the reader knows exactly
            what's going on.
      io_getevents.2
        The 'timeout' argument is not updated
            I looked back through the kernel code, and the timeout was
            never updated in any case.  I've submitted a patch upstream
            to change the comment above io_getevents.
      io_setup.2
        Clarify nr_events
            nr_events is technically the number of completion events that can
            be stored in the completion ring.  The wording of the man page:
            "capable of receiving at least nr_events" seems dubious to me,
            only because I worry that folks might interpret that to mean
            'nr_events' total, instead of 'nr_events' concurrently.
            Further, I've added information on where to find the per-user
            limit on 'nr_events', /proc/sys/fs/aio-max-nr.  Let me know if
            you think that is not relevant.
      listxattr.2
        Explain use of 'size' argument
      lseek.2
        _GNU_SOURCE must be defined to get SEEK_DATE and SEEK_HOLE definitions
            See http://sourceware.org/bugzilla/show_bug.cgi?id=15312
      mmap.2
        Add pointers to relevant /proc files described in proc(5)
      posix_fadvise.2
      pread.2
      readahead.2
      sync_file_range.2
      truncate.2
        Refer to syscall(2) for ABI semantics on certain 32-bit architectures
            Also: in sync_file_range.2 and posix_fadvise.2 remove description
            of conventional calling signature as flawed, and in
            posix_fadvise.2, de-emphasize focus on ARM, and rather phrase
            as a more general discussion of certain architectures.
      readdir.2
        readdir(2) doesn't exist on x86-64
      semop.2
        Clarify the discussion of 'semadj'
      shmctl.2
        Refer to proc(5) for description of /proc/sys/kernel/shm_rmid_forced
      syscall.2
        Add notes that caution users when passing arguments to syscall()
            For example, passing 'long long' on ARM-32 requires special
            treatment.
        Document the exact calling convention for architecture system calls
        Add PA-RISC details under calling conventions
        Refine discussion of ARM and other ABIs
      syscalls.2
        Update kernel version number at start of list
      umask.2
        SEE ALSO: add acl(5)
      unshare.2
        Update feature test macro requirements
            The requirements quietly changed changed in glibc 2.14
            See also http://www.sourceware.org/bugzilla/show_bug.cgi?id=4749
      fopencookie.3
        Correct definition of cookie_io_functions_t
      pthread_setname_np.3
        The thread argument is passed in by value
      readir.3
      seekdir.3
      telldir.3
        Eliminate the implication that these functions deal with "offsets"
            The directory position dealt with by the readdir() and
            friends is not a simple file offset in modern file systems.
            Typically, it is some kind of cookie value. Add text and
            make other changes to these pages to eliminate the
            implication that this is an offset, and warn the reader
            that directory positions should be treated strictly as
            opaque values.
            In the process, rename the 'offset' argument of seekdir(3)
            to 'loc', and add some text to readdir(3) to note that
            the 'd_off' field is the same value returned by telldir(3)
            at the current directory position.
            See also https://lwn.net/Articles/544298/
      scalb.3
        Fix prototypes for scalbf() and scalbl()
      sched_getcpu.3
        Update feature test macro requirements
            The requirements quietly changed changed in glibc 2.14
            See also http://www.sourceware.org/bugzilla/show_bug.cgi?id=4749
      ualarm.3
        Add note on the behavior when 'usecs' is zero
            POSIX.1-2001 does not specify the behavior in this case
            and no other system that I checked documented the behavior.
            Probably, most or all systems do what Linux does in this
            case: cancel any pending alarm, just as alarm(0) does.
            Add that info in NOTES.
      elf.5
        Add byte positions for all EI_xxx fields
            When describing e_ident, most of the EI_xxx defines mention the
            exact byte number.  This is useful when manually hacking an ELF
            with a hex editor.  However, the last few fields don't do this,
            which means you have to count things up yourself.
            Add a single word to each so you don't have to do that.
      proc.5
        Refer to sched_rr_get_interval(2) for info on sched_rr_timeslice_ms
            Since Linux 3.9, /proc/sys/kernel/sched_rr_timeslice_ms can
            be used to change the SCHED_RR quantum.
        SEE ALSO: Add sysctl(8)
        Simplify the example of printing out environ
            The binutils package contains a very handy utility to
            print out null-byte delimited strings from a file.  This
            can replace a rather complex expression with cat(1)
            provided as an example for printing out /proc/[pid]/environ.
        Update /proc/PID/maps example
            Update to 64-bit example that includes "[heap]", "[stack],
            and "[vdso]"
        Formatting fixes for /proc/PID/maps
        Document the "pathname" field of /proc/PID/maps
        Add reference to capabilities(7) for /proc/sys/kernel/cap_last_cap
        /proc/PID/maps: add a reference to mmap(2)
      ip.7
        Document IP_MULTICAST_ALL
            This commit adds documentation for the IP_MULTICAST_ALL socket
            option.
            The option was added to the Linux kernel in 2.6.31:
                Author Nivedita Singhvi <niv@us.ibm.com>
                Commit f771bef98004d9d141b085d987a77d06669d4f4f
            The description is based on a previous one [3] posted by the
            original author of the code -- Nivedita, but it is slightly
            re-worded.
            I tested it myself and it works as described.
            References:
                [1] http://lxr.free-electrons.com/source/net/ipv4/ip_sockglue.c#L972
                [2] http://lxr.free-electrons.com/source/net/ipv4/igmp.c#L2267
                [3] http://patchwork.ozlabs.org/patch/28902/
      units.7
        units should use an actual µ
            The units(7) man page uses an ASCII u in place of the actual Greek
            letter mu.  Since we're in the twenty-first century, with
            UTF-8-compatible terminals and terminal emulators, we should use
            the actual letter µ instead of an ASCII approximation.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=704787

-------------------------------------------------------------------
Mon Mar 18 08:29:56 CET 2013 - pgajdos@suse.cz

- update to version 3.50
  * New and rewritten pages
      canonicalize_file_name.3
        Rewrite page, adding much more detail
  * Global changes
  * Various pages
        Global fix: s/END_LICENSE/LICENSE_END/
  * Various pages
        Global fix: s/bitmask/bit mask/
  * Changes to individual pages
      getent.1
        netgroup description incorrectly refers to initgroups
      capget.2
        Update URL for libcap
      fork.2
        Port access permission bits (ioperm()) are turned off in the child
      futex.2
        'timeout' is a minimum duration that the call will wait, not a maximum
      ioperm.2
        Note that iopl() level of 3 is needed to access ports
        'num' is *bits* not bytes!
        Linux 2.6.8 lifted the port limit to 65,536
            See http://article.gmane.org/gmane.linux.kernel/202624/
            From: Stas Sergeev <stsp <at> aknet.ru>
            Subject: [patch][rfc] Larger IO bitmap
            Date: 2004-05-07 19:55:03 GMT
        ioperm() operates on the calling *thread* (not process)
        Clarify meaning of 'turn_on' argument
            Plus form formatting fixes.
        Clarify that default state of permission bits in child is off
        NOTES: add mention of /proc/ioports
        SEE ALSO: add outb(2)
      iopl.2
        CAP_SYS_RAWIO is required to *raise* the I/O privilege level
        Clarify that the two least significant bits of 'level' are what matter
        SEE ALSO: add outb(2)
      syscalls.2
        Add version information for all (other) syscalls
        Add perfmonctl(2)
      futimes.3
        ERRORS: Add ENOSYS for lutimes()
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=620746
      getpass.3
        Suggest use of the ECHO flag as an alternative
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=644261
      realpath.3
        Document GNU extensions for EACCES and ENOENT errors
      stdarg.3
        Describe va_copy()
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=575077
      termios.3
        Mention that noncanonical mode does not do input processing
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=643854
      random.4
        Document write and document the ioctl interface of /dev/random
            The update consists out of two parts:
             - a minor thing which just documents what happens if a write to
               /dev/(u)random is performed, which is used in the example
               script but not explicitly mentioned.
             - the other (biggest) part is the documentation of the ioctl()
               interface which /dev/(u)random exposes. This ioctl() lives in
               drivers/char/random.c and the primitives can be found in
               include/linux/random.h
            One comment remains, there used to be an RNDGETPOOL ioctl() which
            disappeared in v2.6.9. I found two patches on the net:
            - http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8.1/2.6.8.1-mm4/broken-out/dev-random-remove-rndgetpool-ioctl.patch
            - https://lkml.org/lkml/2004/3/25/168
            But as far as I can tell the first one got applied but the 2nd
            one seems more correct. The result is that even today one can
            still find traces of the RNDGETPOOL ioctl() in the header files.
            Is this there for historical reasons or because it might break
            userspace, even though using it will just give an EINVAL.
      bootparam.7
        Document 'rootfstype' option
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=182014
      capabilities.7
        Add various pieces under CAP_SYS_RAWIO
            Info obtained by grepping the kernel source.
        Add CAP_SYS_RESOURCE /proc/PID/oom_score_adj case
      netlink.7
        Add a note about broadcast messages to multiple groups
      socket.7
        Define _GNU_SOURCE to obtain the definition of 'struct ucred'
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572210

-------------------------------------------------------------------
Tue Mar 12 07:35:34 CET 2013 - pgajdos@suse.cz

- update to version 3.48
  * New and rewritten pages
      getunwind.2
        New page documenting getunwind(2)
            Taken from Red Hat downstream man pages set
        Much rewriting
            Some text taken from arch/ia64/kernel/unwind.c.
      perfmonctl.2
        New page documenting IA-64-specific perfmonctl(2)
            Taken from Red Hat downstream man pages
        Rework discussion of PFM_CREATE_CONTEXT
        Add VERSIONS and CONFORMING TO
        Note that there is no glibc wrapper
        Remove PFM_CREATE_EVTSETS, PFM_DELETE_EVTSETS, PFM_GETINFO_EVTSETS
            These don't exist, and it appears they never have.
        Fix argument types for PFM_WRITE_PMCS, PFM_WRITE_PMDS, PFM_READ_PMDS
            The types that were being used don't exist!
        Briefly document PFM_GET_FEATURES, PFM_DEBUG, PFM_GET_PMC_RESET_VAL
      gai.conf.5
        New page documenting gai.conf
            Taken from Red Hat downstream pages
      nss.conf.5
        New page describing nss.conf
  * Newly documented interfaces in existing pages
      clock_getres.2
        Document CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE
        Document CLOCK_BOOTTIME
        Some improvements to CLOCK_BOOTTIME description
      ptrace.2
        Document PTRACE_GETREGSET, PTRACE_SETREGSET, PTRACE_SEIZE, and friends
            Document PTRACE_GETREGSET, PTRACE_SETREGSET,
            PTRACE_SEIZE, PTRACE_INTERRUPT, and PTRACE_LISTEN.
  * New and changed links
      fattach.2
      fdetach.2
      getmsg.2
      isastream.2
      putmsg.2
        New link to unimplemented.2
            Taken from Red Hat downstream.
            See https://bugzilla.redhat.com/show_bug.cgi?id=436407
  * Global changes
  * Many pages
        Global fix: remove unneeded double quotes in .SH headings
  * Many pages
        Global fix: remove unneeded double quotes in .SS headings
  * Many pages
        Global fix: use consistent capitalization in .SS headings
            Capitalization in .SS sections across pages (and sometimes even
            within a single page) is wildly inconsistent. Make it consistent.
            Capitalize first word in heading, but otherwise use lower case,
            except where English usage (e.g., proper nouns) or programming
            language requirements (e.g., identifier names) dictate otherwise.
  * Many pages
        Remove double blank lines in output
  * Various pages
        Fix order of SH sections
  * Changes to individual pages
      accept.2
        NAME: Add "accept4"
      access.2
        Note that access() may also fail for FUSE
            Since in some cases (e.g. libguestfs's guestmount) it also has the
            semantics where files can appear owned by root, but are actually
            mutable by the user, despite what one might infer from the Unix
            permissions.
      getpeername.2
        Clarify semantics of getpeername() for datagram sockets
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=674034
      getuid.2
        Remove duplicate section heading
      mmap.2
        Add note about partial page in BUGS section
            This adds a note about Linux behavior with partial page at the end
            of the object. The problem here is that a page that contains only
            part of a file (because the file size is not multiple of PAGE_SIZE)
            stays in page cache even after the mapping is unmapped and the file
            is closed. So if some process dirties such page, other mappings
            will see the changes rather than zeroes.
        Some 'flags' values require a feature test macro to be defined
            Add text to NOTES noting that some MAP_* constants are
            defined only if a suitable feature test macro is defined.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=542601
        Document EOVERFLOW error
      open.2
        Clarify list of file creation flags
            POSIX.1-2008 TC1 clarified this, so that O_CLOEXEC,
            O_DIRECTORY, and O_NOFOLLOW are also in this list.
      prctl.2
        Add some details for PR_GET_TID_ADDRESS
      read.2
        Clarify interaction of count==0 and error checking
            POSIX deliberately leaves this case open, so the man
            page should be less specific about what happens.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=533232
        Remove crufty text about O_NONBLOCK on files
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=700529
        Clarify details for seekable files
      unimplemented.2
        Add various STREAMS interfaces to NAME
            Taken from Red Hat downstream.
            See https://bugzilla.redhat.com/show_bug.cgi?id=436407
      cexp2.3
        Still does not exist in glibc 2.17
      exit.3
        Note that a call to execve() clears exit handler registrations
      getaddrinfo.3
        SEE ALSO: Add gai.conf(5)
      malloc_trim.3
        Remove duplicate section title
      printf.3
        Fix error handling in example code
            See https://bugzilla.kernel.org/show_bug.cgi?id=23282
      pthread_yield.3
        Add _GNU_SOURCE feature test macro to SYNOPSIS
      resolver.3
      resolv.conf.5
        RES_DEBUG is only available if glibc is compiled with debug support
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=692136
            and https://bugzilla.kernel.org/show_bug.cgi?id=43061
      strtol.3
        Remove crufty text from previous fix
      core.5
        Document CONFIG_COREDUMP
      capabilities.7
        Nonexistent bits are no longer shown as set in /proc/PID/status Cap*
      inotify.7
        A monitoring process can't easily distinguish events triggered by itself
      ip.7
        Improve explanation about calling listen() or connect()
      man-pages.7
        Describe rules for capitalization in .SS headings
      rtnetlink.7
        Add info about ability to create links with given index
            Since kernel v3.7 the RTM_NEWLINK message now accepts nonzero
            values in ifi_index field. Mention this fact in the respective
            rtnetlink.7 section.
      socket.7
        SO_BINDTODEVICE is now readable
            SO_BINDTODEVICE is readable since since kernel 3.8.

-------------------------------------------------------------------
Thu Feb 28 13:25:33 CET 2013 - pgajdos@suse.cz

- update to version 3.47
  * New and rewritten pages
      perf_event_open.2
        New page documenting perf_event_open(2)
      pthread_setname_np.3
        New page for pthread_setname_np(3) and pthread_getname_np(3)
  * Newly documented interfaces in existing pages
      prctl.2
        Document PR_SET_CHILD_SUBREAPER and PR_GET_CHILD_SUBREAPER
      ip.7
        Add source-specific multicast sockopts
            This patch adds documentation of several source-specific multicast
            socket options that were added to kernel with implementation
            of IGMPv3 in 2.5.68.
            The following socket options were added:
              IP_ADD_SOURCE_MEMBERSHIP
              IP_DROP_SOURCE_MEMBERSHIP
              IP_BLOCK_SOURCE
              IP_UNBLOCK_SOURCE
              IP_MSFILTER
  * Pages moved across sections
      getcontext.3
        This page really belongs in Section 3 (moved from Section 2)
      getdtablesize.3
        Move from Section 2
      sln.8
        New page documenting the 'sln' command provided by glibc
            Inspired by a Red Hat downstream page, but with rather
            more detail.
  * New and changed links
      getcontext.2
        Make link to page moved into Section 3
      getdtablesize.2
        Link to renamed getdtablesize.3
      setcontext.2
        Modify link to point to Section 3
      pthread_getname_np.3
        New link to new pthread_setname_np.3
      setcontext.3
        Link to getcontext page renamed into Section 3
  * Global changes
  * Changes to individual pages
      fallocate.2
        SEE ALSO: add fallocate(1)
      flock.2
        SEE ALSO: add flock(1)
      fork.2
        SEE ALSO: add exit(2)
      getpriority.2
        BUGS: note that nice value is per-thread on Linux
      getrlimit.2
        SEE ALSO: add prlimit(1)
      gettid.2
        SEE ALSO: add various system calls that use thread IDs
      ioprio_set.2
        SEE ALSO: add ionice(1)
      sched_setaffinity.2
        SEE ALSO: add taskset(1)
      sched_setparam.2
        Scheduling policy and parameters are per-thread on Linux
            Direct the reader to the discussion in sched_setscheduler(2).
      sched_setscheduler.2
        Scheduling policy and parameters are per-thread on Linux
      sched_setscheduler.2
        SEE ALSO: add chrt(1)
      setsid.2
        SEE ALSO: add setsid(1)
      shmop.2
        ERRORS: Add EIDRM
            Taken from Red Hat downstream patch
      sigaction.2
      makecontext.3
        Change getcontext/setcontext page ref to Section 3
      signal.2
        Clarify System V vs BSD semantics for signal()
      syscalls.2
        The list on this page is not just syscalls common to all platforms
        Add perfctr(2)
        Add ppc_rtas(2)
        Add kernel version number of utrap_install(2)
      unimplemented.2
        Remove mention of kernel version number in DESCRIPTION
      inet.3
        Fix error in EXAMPLE using inet_aton()
            See https://bugzilla.redhat.com/show_bug.cgi?id=837090
            Patch taken from Red Hat downstream.
      posix_fallocate.3
        SEE ALSO: add fallocate(1)
      regex.3
        Clarify details of matching
            The first is that it's far from clear that the end points of the
            complete string match are stored in the zero'th element of the
            regmatch_t array; secondly, the phrase "next largest substring
            match" is positively misleading, implying some sort of size
            ordering, whereas in fact they are ordered according to their
            appearance in the regex pattern.
      scanf.3
        Clarify meaning of "string conversions" for 'm' modifier
        Update %a vs %m documentation
            POSIX.1-2008 adopted the 'm' flag for dynamic allocation. Update
            page to cover it and relegate the glibc-specific 'a' flag to
            NOTES.
      strtol.3
        Replace some bogus text about "thousands separator"
            See https://bugzilla.redhat.com/show_bug.cgi?id=652870
      sysconf.3
        Use "_SC_PAGESIZE" consistently on page
            s/_SC_PAGE_SIZE/_SC_PAGESIZE/ in one instance.
            From Red Hat downstream patch.
      nscd.conf.5
        Add max-db-size and auto-propagate descriptions, default values, + misc
             * added missing valid services (services and netgroup)
             * added many default values for options
             * reordered options according to the nscd.conf file
               (logical order)
             * added 2 missing options: max-db-size and auto-propagate
      nsswitch.conf.5
        Mention initgroups db
      proc.5
        Document /proc/profile
        Update /proc/sys/fs/file-nr to include Linux 2.6 details
        Clarify relationship between file-max and file-nr
            The third value in /proc/sys/fs/file-nr is the same as
            the value in /proc/sys/fs/file-max.
        Note message written to kernel log when file-max limit is hit
            Info from Documentation/sysctl/fs.txt.
        Mention lscpu(1) under discussion of /proc/cpuinfo
      resolv.conf.5
        Document "single-request-reopen" option
            Taken from Red Hat downstream patch
            See https://bugzilla.redhat.com/show_bug.cgi?id=717770
            See http://thread.gmane.org/gmane.linux.man/3161
      utmp.5
        SEE ALSO: add utmpdump(1)
      cpuset.7
        Add missing 'cpuset.' prefix for some flags
            See kernel commit e21a05cb408bb9f244f11a0813d4b355dad0822e
      svipc.7
        SEE ALSO: add ipcmk(1), ipcrm(1), ipcs(1)
      termio.7
        SEE ALSO: add reset(1), setterm(1), stty(1), tty(4)
      ld.so.8
        LD_VERBOSE does not work with ld.so --list and --verify
            From Red Hat downstream package
            See https://bugzilla.redhat.com/show_bug.cgi?id=532629
        SEE ALSO: add sln(8)
      zdump.8
        Bring up to date with zdump --help
            Patch taken from Red Hat downstream.

-------------------------------------------------------------------
Mon Feb  4 07:33:41 CET 2013 - pgajdos@suse.cz

- update to version 3.46
  * New and rewritten pages
      kcmp.2
        New page for kcmp(2)
  * Newly documented interfaces in existing pages
      init_module.2
        Document finit_module(2)
        Document finit_module() 'flags' argument
            Document MODULE_INIT_IGNORE_MODVERSIONS and
            MODULE_INIT_IGNORE_VERMAGIC. (Some edits by mtk.)
  * New and changed links
      finit_module.2
        New link to init_module.2
      __after_morecore_hook.3
      __free_hook.3
      __malloc_initialize_hook.3
      __memalign_hook.3
      __realloc_hook.3
        New link to malloc_hook.3
  * Global changes
  * Various pages
        Global fix: s/tty/terminal/
  * Changes to individual pages
      clone.2
        Add kernel versions for various CLONE_* constants
        CLONE_NEWIPC governs mechanisms that don't have filesystem pathnames
        CLONE_NEWIPC doesn't mount the POSIX MQ file system
        Add an example program (CLONE_NEWUTS)
        Some reworking of CLONE_NEWIPC text
            No substantial content changes.
        SEE ALSO: add kcmp(2)
        SEE ALSO: add setns(2)
      fallocate.2
        FALLOC_FL_* flags are defined in glibc only since 2.18
      getxattr.2
      removexattr.2
      setxattr.2
        Note that ENOATTR is a synonym for ENODATA
            Various people have pointed out that strace(1) shows ENODATA
            for the case where the named attribute does not exist, or
            the process has no access to this attribute. ENODATA
            and ENOATTR are in fact defined as synonyms. Point this out
            in the man page, so that people understand the strace(1) info.
            See https://bugzilla.kernel.org/show_bug.cgi?id=51871
      getxattr.2
      listxattr.2
      removexattr.2
      setxattr.2
        Put errors under ERRORS section
            The errno values on these pages were listed in a nonstandard
            way under the RETURN VALUE section. Put them in ERRORS sections.
      init_module.2
        ERRORS: Add errors for module signatures (EBADMSG, ENOKEY)
      link.2
      mkdir.2
      mknod.2
      open.2
      rename.2
      symlink.2
      write.2
      mkfifo.3
        Document EDQUOT error
            The return error EDQUOT is not documented in open(2), write(2),
            symlink(2) etc.
            Whether inodes or disk blocks are required for each function
            is something I based on received wisdom and BSD documentation,
            rather than tracing the code to the kernel. For symlink(2)
            this certainly depends on the file system type.
      listxattr.2
        Fix RETURN VALUE description
            On success, 0 may be returned, so change wording from
            "positive number" to "nonnegative number".
      outb.2
        Add SYNOPSIS
      prctl.2
        Document PR_SET_PTRACER
            Document the Yama LSM's prctl handler that allows processes to
            declare ptrace restriction exception relationships via
            PR_SET_PTRACER.
        Make it explicit that PR_SET_PTRACER replaces previous setting
            The attribute is a scalar, not a list.
        Document EINVAL error for PR_SET_PTRACER
        Document PR_GET_TID_ADDRESS
      ptrace.2
        Document PTRACE_O_EXITKILL
        Place PTRACE_SETOPTIONS list in alphabetical order
      query_module.2
        Must be called using syscall(2)
            Yes, the call is way obsolete, but add this info
            for completeness.
      recvmmsg.2
        Add/correct kernel version info for recvmmsg() and MSG_WAITFORNONE
            This patch isolates the since/version related fixes as requested.
            This change introduces the following delta:
             * The page states it was added in 2.6.32 but it is only added
                2.6.33 (ref: http://kernelnewbies.org/Linux_2_6_33)
             * The MSG_WAITFORONE flag was in turn only added in 2.6.34
               (ref: http://kernelnewbies.org/Linux_2_6_34)
        Add an example program
      setns.2
        Add example program
      sigaction.2
        Note feature test macro requirements for 'siginfo_t'
            See https://bugzilla.kernel.org/show_bug.cgi?id=52931
      syscalls.2
        Add kern_features(2)
        Add utrap_install(2)
            Sparc-specific, present since ancient times
        Add finit_module(2)
      sysctl.2
        ERRORS: EACCES as a synonym for EPRM
            See https://bugzilla.kernel.org/show_bug.cgi?id=46731
            and http://thread.gmane.org/gmane.linux.ltp/11413/focus=957635
                From: Garrett Cooper <yanegomi <at> gmail.com>
                Subject: Re: [LTP] [PATCH] sysctl03: sysctl returns EACCES after 2.6.33-rc1
                Newsgroups: gmane.linux.kernel, gmane.linux.ltp
                Date: 2010-03-04 18:35:33 GMT
      unshare.2
        Update NOTES on unimplemented flags
        Fix text problems in description of CLONE_FS
        SEE ALSO: add kcmp(2)
        SEE ALSO: add setns(2)
        Reorder CLONE_NEWUTS entry in list
      difftime.3
        Remove crufty text about 'time_t' on "other systems"
            Back in 2006, some text came in via Debian patches that seems
            crufty. Remove it.
            See https://bugzilla.kernel.org/show_bug.cgi?id=46731
      getaddrinfo.3
      getnameinfo.3
        Fix some confused references to function names
            See https://bugzilla.kernel.org/show_bug.cgi?id=52741
      getspnam.3
        ERRORS: Add EACCES
            See https://bugzilla.kernel.org/show_bug.cgi?id=52681
      __setfpucw.3
        Add proper page cross refs for alternate functions
      core.5
      proc.5
        Clarify suid_dumpable versus core_pattern
            In Linux 3.6, additional requirements were placed on core_pattern
            when suid_dumpable is set to 2. Document this and include commit
            references.
      proc.5
        statm's "shared" field refers to pages backed by files
            I noticed that statm's "shared" field doesn't match the sum of
            all the "shared" entries in smaps [1].
            The kernel docs explain that statm's "shared" field is "number of
            pages that are shared (i.e. backed by a file)" [2].  smaps appears
            to call a page shared if it's mapped by at least two processes,
            which explains this discrepancy.
            I'm not a kernel hacker, but it appears to me they do mean "i.e."
            and not "e.g." in the statm description: In
            fs/proc/task_mmu.c::task_statm, I see
                *shared = get_mm_counter(mm, MM_FILEPAGES);
            Here's a patch which updates the man page to match the (hopefully
            correct) kernel docs.
            [1] https://bugzilla.mozilla.org/show_bug.cgi?id=807181
            [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=Documentation/filesystems/proc.txt;h=a1793d670cd01bd374eddf54ffdfc768504291ff;hb=HEAD
      proc.5
        Put /proc/sys/kernel/hotplug in alphabetical order
        Document /proc/sys/kernel/dmesg_restrict
        Linux 3.4 changed permissions needed to change kptr_restrict
        Add field numbers for /proc/PID/stat
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=553413
        Add numbering to /proc/stat "cpu" fields
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=553413
        Reorganize text describing /proc/stat "cpu" fields
        Rewording of suid_dumpable text after comments from Kees Cook
        Add field numbers for /proc/[pid]/statm
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=553413
        Document /proc/stat "cpu" "nice_guest" field
            Info taken from commit ce0e7b28fb75cb003cfc8d0238613aaf1c55e797
        Document /prod/[pid]/oom_score_adj
            Text taken directly from Documentation/filesystems/proc.txt,
            with some light editing.
            See https://bugzilla.kernel.org/show_bug.cgi?id=50421
      shells.5
        Add /etc/bash to list of example shells
      ttytype.5
        Add proper xref for termcap and terminfo pages
      capabilities.7
        Add kcmp(2) under CAP_SYS_PTRACE
      man-pages.7
        Update description of Section 7

-------------------------------------------------------------------
Mon Dec 31 08:49:14 CET 2012 - pgajdos@suse.cz

- update to version 3.45
  * New and rewritten pages
      s390_runtime_instr.2
        New page for s390-specific s390_runtime_instr(2)
      if_nameindex.3
        Document if_nameindex(3) and if_freenameindex(3)
        Edits, improvements and corrections to Hideaki's page
        Add an example program
      if_nametoindex.3
        New page documenting if_nametoindex(3) and if_indextoname(3)
  * Newly documented interfaces in existing pages
  * New and changed links
      if_freenameindex.3
        New link to if_nameindex.3
      if_indextoname.3
        New link to if_nametoindex.3
  * Global changes
      sysconf.3
      cciss.4
        Global fix: s/runtime/run time/
  * Changes to individual pages
      clone.2
        Since 2.6.30, CLONE_NEWIPC also supports POSIX message queues
      delete_module.2
        Small rewording of description of effect of O_TRUNC
      getrlimit.2
        Document Linux's nonstandard treatment or RLIMIT_CPU soft limit
            Upon encountering the RLIMIT_CPU soft limit when a SIGXCPU handler
            has been installed, Linux invokes the signal handler *and* raises
            the soft limit by one second. This behavior repeats until the
            limit is encountered.  No other implementation that I tested
            (Solaris 10, FreeBSD 9.0, OpenBSD 5.0) does this, and it seems
            unlikely to be POSIX-conformant. The (Linux-specific)
            RLIMIT_RTTIME soft limit exhibits similar behavior.
        Point reader at discussion of /proc/[pid]/limits in proc(5)
      io_getevents.2
        io_getevents() may cause segfault when called with invalid ctx_id
            For reference see: http://marc.info/?l=linux-aio&m=130089887002435&w=2
      recv.2
        UNIX domain sockets support MSG_TRUNC since 3.4
      sendmmsg.2
        Add example program for sendmmsg()
      stat.2
        Clarify description of EOVERFLOW error
            The EOVERFLOW error is not only for st_size, but also
            inode and block size fields. See glibc source file
            sysdeps/unix/sysv/linux/xstatconv.c and kernel source
            file fs/stat.c. Also, fix bit/byte confusion
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=604928
      syscalls.2
        Update various references to "i386" to "x86"
        Add s390_runtime_instr(2)
      sysctl.2
        Mention CONFIG_SYSCTL_SYSCALL
        Calls to sysctl() log warnings to the kernel log since 2.6.24
      syslog.2
        Substantially reorganize discussion of commands
            Make the layout of the discussion of the commands
            more readable.
        Add kernel symbolic 'type' names
        Clarify SYSLOG_ACTION_SIZE_UNREAD semantics
            SYSLOG_ACTION_SIZE_UNREAD returns the number of bytes
            available for reading via SYSLOG_ACTION_READ.
        Clarify where SYSLOG_ACTION_READ_ALL places data it reads
        Clarify semantics of SYSLOG_ACTION_CLEAR
            The SYSLOG_ACTION_CLEAR command (5) does not really clear
            the ring buffer; rather it affects the semantics of what
            is returned by commands 3 (SYSLOG_ACTION_READ_ALL) and
            4 (SYSLOG_ACTION_READ_CLEAR).
        Clarify discussion of privileges for commands 3 and 10
        Add mention of CONFIG_LOG_BUF_SHIFT
      wait.2
        BUGS: Document odd waitid() behavior when 'infop' is NULL
      getifaddrs.3
        Update description of ifa_data to Linux 2.6+ reality
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=526778
      memcmp.3
        Enhance RETURN VALUE text and remove redundant text from DESCRIPTION
            Note that sign of result equals sign of difference between
            first two bytes that differ (treated as "unsigned char")."
      mkstemp.3
        Deemphasize discussion of mode 066 in glibc 2.0.6
            Glibc 2.0.6 is now so ld that the discussion of details
            of that version can be deemphasized placing just under
            NOTES.
            See https://bugzilla.kernel.org/show_bug.cgi?id=51811
      strcmp.3
        Enhance RETURN VALUE text and remove redundant text from DESCRIPTION
            Note that sign of result equals sign of difference between
            first two bytes that differ (treated as "unsigned char")."
      ttyname.3
        Fix confused text in ERRORS
            The existing text suggested that the ERRORS applied
            only for ttyname_r(). However, 2 of the 3 errors
            can occur for ttyname().
      undocumented.3
        Remove some now documented functions
      proc.5
        Correct description of SwapFree in /proc/meminfo
        Note change of /proc/[pid]/limits file permissions in 2.6.36
      resolv.conf.5
        Document IPv6 format for nameserver
            See: http://bugs.debian.org/610036
      capabilities.7
        Correct URL for POSIX.1e draft
      ipv6.7
        Add description of getsockopt() for IPV6_MTU
            In IPv4,IP_MTU is only supported by getsockopt.
            In IPv6, we can use IPV6_MTU to set socket's MTU,
            but the return value of getsockopt() is the path MTU.
      rtnetlink.7
        Update description of IFLA_STATS to Linux 2.6+ reality
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=526778
      socket.7
        Document 'sockaddr' and 'sockaddr_storage' types
        Explain effect of SO_SNDTIMEO for connect()
            When SO_SNDTIMEO is set before connect(), then connect()
            may return EWOULDBLOCK when the timeout fires.

-------------------------------------------------------------------
Fri Nov 16 10:25:25 CET 2012 - pgajdos@suse.cz

- update to version 3.44
  * New and rewritten pages
      delete_module.2
        Rewrite to Linux 2.6+ reality
        Change license and copyright
            There is now nothing left of the original FSF-copyrighted
            page. So, change the copyright and license.
        Substantial reorganization after comments from Rusty Russell
            Rusty notes that O_NONBLOCK is almost always used in
            practice. Therefore, it would be better to reorganize
            the page to consider that "the default".
      init_module.2
        Rewrite to Linux 2.6+ reality
        Change copyright and license
            Little of the original page now remains. Change
            copyright and license
        Changes after review comments from Rusty Russell
        Add various pieces describing Linux 2.6+ behavior
            Pieces take from, or inspired by, a patch sent by Kees.
      getauxval.3
        Document getauxval() function added in glibc 2.16
  * Global changes
  * Various pages
        Global fix: Use consistent capitalization in NAME section
            The line(s) in the NAME section should only use capitals
            where English usage dictates that. Otherwise, use
            lowercase throughout.
  * Various pages
        Global fix: "userspace" ==> "user space" or "user-space"
            Existing pages variously use "userspace or "user space".
            But, "userspace" is not quite an English word.
            So change "userspace" to "user space" or, when used
            attributively, "user-space".
  * Changes to individual pages
      clock_getres.2
      clock_nanosleep.2
        Linking with -lrt is no longer needed from glibc 2.17 onward
      create_module.2
        Note that this system call is present only in kernels before 2.6
        Note that ENOSYS probably indicates kernel 2.6+
      execve.2
        Document treatment of PR_SET_PDEATHSIG on execve()
        Document treatment of SECBIT_KEEP_CAPS securebits flag on execve()
      fork.2
        Note treatment of default timer slack value on fork()
      getdomainname.2
        Point out that these calls relate to NIS, not DNS
            See http://bugs.debian.org/295635
      get_kernel_syms.2
        Note that this system call is present only in kernels before 2.6
      ipc.2
        Update note on architectures that don't have ipc()
            Replace mention of ia64 with x86-64 and ARM.
      link.2
        Add EPERM error triggered by /proc/sys/fs/protected_hardlink
      prctl.2
        Mention Documentation/prctl/no_new_privs.txt for PR_SET_NO_NEW_PRIVS
        update seccomp sections for mode 2 (BPF)
            This adds a short summary of the arguments used
            for "mode 2" (BPF) seccomp.
        Small improvements to PR_SET_SECCOMP discussion
            Note type of 'arg3' for SECCOMP_MODE_FILTER.
            Add pointer to Documentation/prctl/seccomp_filter.txt.
        Note 'seccomp' semantics with respect to fork(), execve(), and prctl()
        Document PR_SET_TIMERSLACK and PR_GET_TIMERSLACK
        Reword PR_SET_NAME and PR_GET_NAME in terms of threads
            Plus tfix
        document PR_SET_NO_NEW_PRIVS, PR_GET_NO_NEW_PRIVS
            This adds a short description of the no_new_privs bit,
            as described in Documentation/prctl/no_new_privs.txt.
      ptrace.2
        Clarify that some operations are not present on all architectures
            PTRACE_GETREGS, PTRACE_SETGREFS, PTRACE_GETFPREGS,
            and PTRACE_GETSPREGS are not present on all architectures.
            PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP are present only
            on x86.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=122383
      query_module.2
        Add a few words clarifying reference to /sys/module
        Note that this system call is present only in kernels before 2.6
        Note that ENOSYS probably indicates kernel 2.6+
        SEE ALSO: Add modinfo(8) and lsinfo(8)
        Move some information in NOTES to VERSIONS
      socketcall.2
        Update note on architectures that don't have socketcall()
            Replace mention of ia64 with x86-64 and ARM.
      times.2
        Recommend clock_gettime(2) as alternative to times(2)
      clock_getcpuclockid.3
        Linking with -lrt is no longer needed from glibc 2.17 onward
      fts.3
        Improve description of physical vs. logical tree walking
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=633505
      getenv.3
        SEE ALSO: add getauxval(3)
      proc.5
        Document /proc/meminfo
            Info mostly taken from Documentation/filesystems/proc.txt
            and Documentation/vm/hugetlbpage.txt.
        Default for /proc/sys/fs/protected_{hardlinks,symlinks} is now 0
            The default setting of 1 in/proc/sys/fs/protected_hardlinks
            and /proc/sys/fs/protected_symlinks caused one too many
            breakages for Linus's taste, so commit 561ec64ae67e changed
            the default for both files to 0.
        Note system call error yielded by /proc/sys/fs/protected_symlinks
            Note that violating 'protected_symlinks' restrictions
            causes system calls to fail with the error EACCES.
        Since Linux 2.6.27, /proc/sys/kernel/modprobe depends on CONFIG_MODULES
      ipv6.7
        Document IPV6_RECVPKTINFO
      man-pages.7
        Note rules for capitalization in NAME section
      time.7
        Add a subsection on timer slack
      ld.so.8
        SEE ALSO: add getauxval(3)

-------------------------------------------------------------------
Thu Nov  1 09:41:20 CET 2012 - pgajdos@suse.cz

- update to version 3.43
  * Newly documented interfaces in existing pages
      getenv.3
        Document secure_getenv(3)
  * New and changed links
      phys.2
        New link to unimplemented.2
      secure_getenv.3
        New link to getenv.3
  * Global changes
  * Various pages
        Global fix: s/-/\\-/ when real hyphen is required (e.g., in code)
  * Various pages
        Global fix: Various consistency fixes for SEE ALSO
  * Various pages
        Global fix: use "Linux kernel source" consistently
            Rather than "kernel source".
  * Various pages
        Global fix: disable justification and hyphenation in SEE ALSO
            For a better visual result, disable justification and hyphenation
            in SEE ALSO where page names are long.
  * Changes to individual pages
      epoll_wait.2
        Describe timeout limitation in kernels < 2.6.37
            As reported by Fredrik (and as far as I can tell the problem
            went back to 2.6.0):
            The timeout argument has an upper limit. Any values above that
            limit are treated the same as -1, i.e. to wait indefinitely.
            The limit is given by:
                #define EP_MAX_MSTIMEO min(1000ULL * MAX_SCHEDULE_TIMEOUT / HZ, \
                (LONG_MAX - 999ULL) / HZ)
            That is, the limit depends on the size of a long and the timer
            frequency.  Assuming the a long is never smaller than 32 bits
            and HZ never larger than 1000, the worst case is 35 minutes.
            I think this should be mentioned under "BUGS".
            Although this is likely to be fixed in the future
            (http://lkml.org/lkml/2010/8/8/144), the problem exists in
            at least 2.6.14 - 2.6.35. I don't know if select(2) and poll(2)
            are affected.
            https://bugzilla.kernel.org/show_bug.cgi?id=20762
        Add pointer to select(2) for discussion of close in another thread
      getitimer.2
        Note Linux's odd handling of the new_value==NULL case
        Fix types used to declare fields in timeval struct
      keyctl.2
        Reorder SEE ALSO, without .br
      poll.2
        Add pointer to select(2) for discussion of close in another thread
      select.2
        Note behavior if monitored file descriptor is closed in another thread
            Executive summary: a sane application can't rely on any
            particular behavior if another thread closes a file descriptor
            being monitored by select().
            See https://bugzilla.kernel.org/show_bug.cgi?id=40852
        Clarify equivalent pselect() code in terms of threads
            s/sigprogmask/pthread_sigmask/
      semop.2
        Recast discussion of blocking behavior in terms of threads
            semop() blocks the calling thread, not the process.
        SEE ALSO: Add clone(2)
            Give reader a clue about CLONE_SYSVSEM.
      shutdown.2
        Document EINVAL error (and associated bug)
            Eric Dumazet noted that EINVAL was not documented. Some further
            digging shows that it's also not diagnosed consistently.
            See https://bugzilla.kernel.org/show_bug.cgi?id=47111.
      sigaction.2
        Tweak SA_RESETHAND description
      syscalls.2, uname.2, boot.7
        Global fix: s/OS/operating system/
      timer_settime.2
        Small rewording around discussion of pointer arguments
      wait4.2
        Note that these functions are nonstandard and recommend alternatives
            Some edits to Adrian's path by mtk.
        CONFORMING TO: Note SUS details for wait3()
      gnu_get_libc_version.3
        Remove unneeded "#define _GNU_SOURCE" from SYNOPSIS
      pthread_kill.3, pthread_sigqueue.3
        Remove wording "another"
            Writing "another thread" in these pages implies that these
            functions can't be used to send a signal to the calling thread
            itself, which is of course untrue.
      sigvec.3
        Add "int" arg to sv_handler definition in sigvec structure
        Fix small error in discussion of blocking of signals
            The signal that causes the handler to be invoked is blocked,
            but saying "by default" implies that this can be changed via
            the API. It cannot. (One needs sigaction(2) for that.)
      syslog.3
        Remove (apparently bogus) text claiming LOG_AUTH is deprecated
            LOG_AUTH is in POSIX, and widely available. There
            seems to be no basis to the claim it is deprecated.
            Quoting Simon:
                I cannot find any other source that claim LOG_AUTH is
                deprecated in any way.  LOG_AUTH is distinct from
                LOG_AUTHPRIV.  The GNU C Library manual only documents
                LOG_AUTH.  The header files contains both without any
                comment.  Common systems like Debian appear to refer to
                both auth and authpriv facilities in syslog configurations.
                Popular daemons appear to use both facilities.
                Both facilities are discussed in several RFCs.
            See https://bugzilla.kernel.org/show_bug.cgi?id=46091
      ttyname.3
        SEE ALSO: Add ctermid(3)
      proc.5
        Clarify header file related to 'flags' field of /proc/PID/stat
        Update description of 'starttime' field of /proc/PID/stat
            The unit of measurement changed from jiffies to clock ticks in
            Linux 2.6.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675891
        Document /proc/sys/kernel/kptr_restrict
        Document /proc/sys/fs/protected_symlinks
            Based on text in Documentation/sysctl/fs.txt by Kees Cook
        Document /proc/sys/fs/protected_hardlinks
            Based on text in Documentation/sysctl/fs.txt by Kees Cook
      capabilities.7
        Document interaction of CAP_SYSLOG and /proc/sys/kernel/kptr_restrict
      ip.7
        SEE ALSO: Add ipv6(7)
        SEE ALSO: Add icmp(7)
      man-pages.7
        Add some advice about disabling hyphenation in SEE ALSO
      ld.so.8
        Describe interpretation of slashes in dependency strings
        Repeat note that LD_LIBRARY_PATH is ignored in privileged programs
            This point is already noted when discussing search order for
            libraries, but it's worth repeating under the specific discussion
            of LD_LIBRARY_PATH further down the page.
        Add some details for LD_PRELOAD
        Note that LD_PRELOAD list separator can be space or colon

-------------------------------------------------------------------
Mon Aug 27 09:10:27 CEST 2012 - pgajdos@suse.cz

- update to version 3.42
  * Global changes
  * Various pages
        Global fix: use UR macro where applicable
            The syntax .UR http://example.com paired with .UE will create
            links which one can interact, if the pager allows that.  One
            way to see the effect is ask the man(1) command to use browser
            display, e.g.:
                man -H man7/uri.7
            ("\:" is optional groff syntax to permit hyphenless line breaks.)
  * Changes to individual pages
      ldd.1
        Add security note on untrusted executables
            See also http://www.catonmat.net/blog/ldd-arbitrary-code-execution/
            and
            http://tldp.org/HOWTO/Program-Library-HOWTO/shared-libraries.html
      clone.2
        Rewrite discussion of sys_clone
      futex.2
        Consolidate error descriptions to ERRORS
        Various wording fix-ups
        Fix description of EINVAL error
            The current text seems incorrect. Replace with a more general
            description.
      getdents.2
      select_tut.2
      atof.3
      atoi.3
      pthread_create.3
      pthread_sigmask.3
      rtime.3
      setbuf.3
      tsearch.3
      netlink.7
        Remove unneeded casts
      get_robust_list.2
      get_thread_area.2
      getcpu.2
      getdents.2
      gettid.2
      io_cancel.2
      io_destroy.2
      io_getevents.2
      io_setup.2
      io_submit.2
      ioprio_set.2
      kexec_load.2
      llseek.2
      modify_ldt.2
      mq_getsetattr.2
      pivot_root.2
      readdir.2
      rt_sigqueueinfo.2
      set_thread_area.2
      sgetmask.2
      spu_create.2
      spu_run.2
      subpage_prot.2
      sysctl.2
      tkill.2
        Add note to SYNOPSIS that there is no glibc wrapper for system call
            Reduce the chance that the reader may be misled into thinking
            that there is a wrapper function for this system call by noting
            explicitly in the SYNOPSIS that there is no glibc wrapper and
            pointing the reader to NOTES for further details.
      ioprio_set.2
        Clarify the multithreaded behavior of ioprio_set(2)
        Document who==0 for IOPRIO_WHO_PROCESS and IOPRIO_WHO_PGRP
            For IOPRIO_WHO_PROCESS, who==0 means operate on the caller.
            For IOPRIO_WHO_PGRP, who==0 means operate on the caller's
            process group.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=652443
      migrate_pages.2
        Fix description of return value
      mount.2
        For MS_REMOUNT, source is ignored
      mprotect.2
        'addr' argument is not const
            As reported by Rasmus:
                Both my system's man-pages (3.22) and the latest online
                (3.41) show:
                    int mprotect(const void *addr, size_t len, int prot);
                as the prototype for mprotect(2). However, POSIX [1] and the
                actual sys/mman.h (on all the systems I checked) do not have
                the const qualifier on the first argument.
      msgctl.2
      semctl.2
      shmctl.2
      svipc.7
        Don't mention that ipc_perm is defined in <sys/ipc.h>
            There's no need to mention that the 'ipc_perm' structure
            is defined in <sys/ipc.h>. That's an implementation detail,
            and furthermore <sys/ipc.h> is itself included by the other
            System V IPC header files. The current text might lead the
            reader to conclude that they must include <sys/ipc.h>, which
            is not the case (it is required neither on Linux, nor by the
            standards).
      msgctl.2
      msgget.2
      msgop.2
      semctl.2
      semget.2
      semop.2
      shmctl.2
      shmget.2
        NOTES: <sys/types.h> and <sys/ipc.h> aren't strictly needed
            Add text to NOTES to say that the <sys/types.h> and <sys/ipc.h>
            header files aren't required by Linux or the standards, but may
            be needed for portability to old systems.
      ptrace.2
        Explain WNOHANG behavior and EINTR bug
            I didn't like ithe "SIGKILL operates similarly, with exceptions"
            phrase (if it's different, then it's not "similar", right?),
            and now I got around to changing it. Now it says simply:
            "SIGKILL does not generate signal-delivery-stop and therefore
            the tracer can't suppress it."
            Replaced "why WNOHANG is not reliable" example with a more
            realistic one (the one which actually inspired to add this
            information to man page in the first place): we got
            ESRCH - process is gone! - but waitpid(WNOHANG) can still
            confusingly return 0 "no processes to wait for".
            Replaced "This means that unneeded trailing arguments may
            be omitted" part with a much better recommendation
            to never do that and to supply zero arguments instead.
            (The part about "undocumentedness" of gcc behavior was bogus,
            btw - deleted).
            Expanded BUGS section with the explanation and an example
            of visible strace behavior on the buggy syscalls which
            exit with EINTR on ptrace attach. I hope this will lead
            to people submitting better bug reports to lkml about
            such syscalls.
      seteuid.2
        Note glibc version where setegid() implementation changed
            In glibc 2.2/2.3, setegid() switched from setregid() to setresgid().
      set_tid_address.2
        Rename 'ctid' argument for consistency with clone(2) page
        Some rewordings and minor clarifications
      sigwaitinfo.2
        Some wording clarifications
            Mainly rewording things like "is delivered" to "becomes pending",
            which is more accurate terminology.
      syscall.2
        Add some more details to the description of syscall(2)
            And add another example of using syscall() to the program example.
      syscalls.2
        Add kcmp(2)
        Move discussion of set_zone_reclaim(2) out of main table
            This system call was never visible to user space, so it makes
            sense to move it out of the main table of system calls into
            the notes below the table.
      getifaddrs.3
        Note that ifa_addr and ifa_netmask can be NULL
      readdir.3
        Handle -1 error from pathconf() in example code snippet
            Improve the example demonstrating allocation of a buffer
            for readdir_r() to handle -1 error return from pathconf().
            Otherwise, naive readers may think that pathconf() return
            value can be used without checking.
      realpath.3
        Use past tense with ancient history (libc4, libc5)
      regex.3
        Correct SEE ALSO reference to glibc manual "regex" section
      rtime.3
        Fix broken pointer cast in example code
      sem_close.3
      sem_destroy.3
      sem_getvalue.3
      sem_init.3
      sem_open.3
      sem_post.3
      sem_unlink.3
      sem_wait.3
      sem_overview.7
        Note that "cc -pthread" is required; "-lrt" no longer works
            See https://bugs.launchpad.net/ubuntu/+source/manpages/+bug/874418
      sigwait.3
        Reword "is delivered" to "becomes pending"
      strcat.3
        Add some text to emphasize the dangers of buffer overruns
        NOTES: Add discussion of strlcat()
      strcpy.3
        Note that info is lost when strncpy() doesn't null terminate
        Add some text to emphasize possibility of buffer runs with strcpy()
        NOTES: Add a discussion of strlcpy()
            Inspired by https://lwn.net/Articles/506530/
        Fix description of the null-byte padding performed by strncpy()
      tsearch.3
        NOTES: remove redundant discussion of unorthodox use of term "postorder"
            This point is already covered at greater length in the main
            text of the page (See the piece "More commonly, ...").
        Clarify use for first argument to the twalk() 'action' function
            There's a number of details in POSIX that are omitted in
            the current version of this page.
        Some wording fixes
      core.5
        Note effect of madvise(2) MADV_DONTDUMP flag
      capabilities.7
        Document CAP_BLOCK_SUSPEND
      glob.7
        Change 8 bit characters to 7 bit representation
            Fixes rendering errors for accented 'a' characters.
        Update bash(1) command used to obtain classical globbing behavior
            The man page formerly noted the bash(1) v1 command to do this.
      iso_8859-1.7
        Explanation of SOFT HYPHEN and the code for it
            <groff: iso_8859-2.7>:89: warning: can't find special character `shc'
            This is the only "iso_8859-*.7" file that has this (now)
            undefined character.  The code in column four in "iso_8859-1.7" is
            "0x2D" ("HYPHEN, MINUS SIGN" or "HYPHEN-MINUS") instead of "0xAD".
            See Debian bug 156154 (or package "manpages").
            There should be an explanation for this graphic character and the
            code should be 0xAD in iso_8859-1.7 (as in all others), even
            though "[gn]roff" does not display a "HYPHEN" in that position of
            the table.
            The line with "SOFT HYPHEN" gets a footnote and a short
            explanation.
      mdoc.7
        Fixing a warning and a table
            Fis warning from "groff -ww ..." (or "man --warnings=w ..."):
                <groff: mdoc.7>:294: warning:
                tab character in unquoted macro argument
            In one table the distance between columns is too small in the
            "ps" output.  (Bug in the groff "doc.tmac" macro?)
      mdoc.samples.7
        Fix warnings from [ng]roff, corrections
            From "man -ww ..." (groff -ww ...):
                <standard input>:541: warning:
                tab character in unquoted macro argument
                [+3 similar warnings]
                <standard input>:813: warning: macro `Pu' not defined
                Usage: .Rv -std in sections 2 and 3 only (#1669)
                mdoc warning: A .Bl directive has no matching .El (#1821)
            String "Pu" defined as a row of punctuation characters.
            ".Bl" and ".El" fixed.
            Some arguments, that start with a period or are the name of a
            macro, protected with "\&".
            Variable name for macro ".Rv" corrected.
      netdevice.7
        Line in table too long
            Fix warning from "man ..." ("nroff -ww ..."):
                nroff: netdevice.7: warning: around line 98:
                table wider than line width
            Fix: No right adjustment in text blocks in tables.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=673873
      netlink.7
        Line in table is too long
            Fix warning from "man ..." ("nroff -ww ..."):
                nroff: netlink.7: warning: around line 195:
                table wider than line width
            Horizontal line incorporated into table.
            No right adjustment of text blocks in tables.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=673875
        Change description of "*_pid" fields to "Port ID"
            As reported by Herbert Xu, these should not be considered as PIDs.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=383296
      rtnetlink.7
        Line in table too long
            Fix warning from "man ..." ("nroff -ww ..."):
                nroff: rtnetlink.7: warning: around line 415:
                table wider than line width
            Column gutter reduced to fit line length.
            Right adjustment in text blocks removed in tables.
            Some header made centered in tables.
            One table put on same page.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=674051
      socket.7
        Document SO_MARK socket option
            Commit 4a19ec5800fc3bb64e2d87c4d9fdd9e636086fe0 in Jan 2008 added
            the new SO_MARK socket option.
            This patch is based on text from the commit message.
            See https://bugzilla.kernel.org/show_bug.cgi?id=16461.
      svipc.7
        SYNOPSIS: Remove include of <sys/types.h> and <sys/ipc.h>
            Including <sys/types.h> and <sys/ipc.h> isn't needed on Linux
            and isn't really relevant for the explanation on this page.

-------------------------------------------------------------------
Wed May 30 10:16:04 CEST 2012 - pgajdos@suse.cz

- update to version 3.41
  * New and rewritten pages
      get_robust_list.2
        New page documenting get_robust_list(2) and set_robust_list(2)
      mallinfo.3
        New page for mallinfo(3)
      malloc_info.3
        New page for malloc_info(3)
      malloc_stats.3
        New man page for malloc_stats(3)
  * Newly documented interfaces in existing pages
      madvise.2
        Document MADV_DONTDUMP and MADV_DODUMP
  * New and changed links
      set_robust_list.2
        New link to new get_robust_list.2 page
      LIST_ENTRY.3
      LIST_HEAD.3
      LIST_INIT.3
      LIST_INSERT_AFTER.3
      LIST_INSERT_HEAD.3
      LIST_REMOVE.3
      TAILQ_ENTRY.3
      TAILQ_HEAD.3
      TAILQ_INIT.3
      TAILQ_INSERT_AFTER.3
      TAILQ_INSERT_HEAD.3
      TAILQ_INSERT_TAIL.3
      TAILQ_REMOVE.3
      CIRCLEQ_ENTRY.3
      CIRCLEQ_HEAD.3
      CIRCLEQ_INIT.3
      CIRCLEQ_INSERT_AFTER.3
      CIRCLEQ_INSERT_BEFORE.3
      CIRCLEQ_INSERT_HEAD.3
      CIRCLEQ_INSERT_TAIL.3
      CIRCLEQ_REMOVE.3
        New link to queue.3
            The queue(3) page documents these macros, so it makes sense to
            have links for the names.
      DES_FAILED.3
        New link to des_crypt.3
            The des_crypt(3) page documents this macro, so it makes sense
            to have a link for the name.
      qsort_r.3
        New link to qsort.3
            Overlooked to add this link in 3.38, when documentation of
            qsort_r() was added to the qsort.3 page.
  * Global changes
      faccessat.2
      fchmodat.2
      fchownat.2
      fstatat.2
      futimesat.2
      inotify_init.2
      linkat.2
      mkdirat.2
      mknodat.2
      openat.2
      readlinkat.2
      renameat.2
      setns.2
      splice.2
      symlinkat.2
      sync.2
      tee.2
      unlinkat.2
      vmsplice.2
        Global fix: note glibc version that added library support
      confstr.3
      strcasecmp.3
      strcat.3
      strcmp.3
      strcpy.3
      strdup.3
      strftime.3
      strlen.3
      strnlen.3
      strpbrk.3
      strspn.3
      strtok.3
      strxfrm.3
        Clarify that these functions operate on bytes, not (wide) characters
            Change 'character(s)' to 'byte(s)' to make clear that these
            functions operate on bytes, not wide / UTF8 characters.
            (POSIX uses 'byte(s)' similarly, to make this point.)
      icmp.7
      ipv6.7
      packet.7
      raw.7
      rtnetlink.7
      unix.7
      x25.7
        Remove names of constants from NAME line
            Some of the sockets/network protocol pages included names of
            the corresponding address family constants in the NAME line,
            but this wasn't done consistently across all pages, and probably
            it adds little value in those pages that did do this. So, remove
            these constants from those pages that have them in the NAME
            section.
  * Changes to individual pages
      clock_getres.2
        Expand description of CLOCK_REALTIME
            Make it clear that this clock may be discontinuous, and is
            affected my incremental NTP and clock-adjtime(2) adjustments.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=540872
      epoll_wait.2
        Clarify that 'timeout' is a *minimum* interval
            Make it clear that 'timeout' is a minimum interval; the actual
            interval will be rounded up to the system clock granularity,
            and may overrun because of kernel scheduling delays.
      execve.2
        Rewording to deemphasize libc5 details
      fork.2
        ERRORS: add ENOSYS
            Can occur on, for example, non-MMU hardware.
      getcpu.2
        Add RETURN VALUE and ERRORS sections
        Refer reader to NOTES for more info about 'tcache'
        DESCRIPTION: reword a sentence to be clearer
      io_cancel.2
      io_destroy.2
      io_getevents.2
      io_setup.2
      io_submit.2
        Rewrite to focus on system call API
            Rewrite to focus on the system call interface, adding
            some notes on the libaio wrapper differences.
            See the following mail:
            2012-05-07 "aio manuals", linux-man@vger.kernel.org
            http://thread.gmane.org/gmane.linux.man/1935/focus=2910
            Other minor rewrites.
      mount.2
        Comment out an old Linux libc detail
      open.2
        Describe race of direct I/O and fork()
            Rework 04cd7f64, which didn't capture the details correctly.
            See the April/May 2012 linux-man@ mail thread "[PATCH]
            Describe race of direct read and fork for unaligned buffers"
            http://thread.gmane.org/gmane.linux.kernel.mm/77571
      poll.2
        Clarify that 'timeout' is a *minimum* interval
            Make it clear that 'timeout' is a minimum interval; the actual
            interval will be rounded up to the system clock granularity,
            and may overrun because of kernel scheduling delays.
        Clarify discussion of wrapper function emulation
            Clarify that glibc (as well as old libc) provides emulation
            using select(2) on older kernels that don't have a poll()
            system call.
        Make the meaning of a zero timeout explicit
            Clarify that timeout==0 causes an immediate return, even if
            no file descriptors are ready.
      pread.2
        BUGS: Note O_APPEND + pwrite() does the wrong thing
            See https://bugzilla.kernel.org/show_bug.cgi?id=43178
      recvmmsg.2
        Clarify that 'timeout' is a *minimum* interval
            Make it clear that 'timeout' interval will be rounded up to the
            system clock granularity, and may overrun because of kernel
            scheduling delays.
      select.2
        Clarify that 'timeout' is a *minimum* interval
            Make it clear that 'timeout' is a minimum interval; the actual
            interval will be rounded up to the system clock granularity,
            and may overrun because of kernel scheduling delays.
        Expand description of the self-pipe trick
        Add further details on pselect6() system call that underlies pselect()
      semop.2
        Clarify that 'timeout' of semtimedop() is a *minimum* interval
            Make it clear that 'timeout' interval will be rounded up to the
            system clock granularity, and may overrun because of kernel
            scheduling delays.
      signal.2
        Note that 'sig_t' requires _BSD_SOURCE
            Also remove some old Linux libc details
      sigwaitinfo.2
        Clarify that 'timeout' of sigtimedwait() is a *minimum* interval
            Make it clear that 'timeout' is a minimum interval; the actual
            interval will be rounded up to the system clock granularity,
            and may overrun because of kernel scheduling delays.
      stat.2
        Formatting fixes
            From "groff -ww" (or "man --warnings=w ..."):
                warning: around line 442: table wider than line width
            GNU man uses line length of 78.
            Use text blocks.  Two spaces between sentences or better: start
            each sentence in a new line.
      syscalls.2
        Formatting fixes
            From "groff -ww ..." (or "man --warnings=w ..."):
                warning: around line 157: table wider than line width
            Have to use text blocks.  Move some text to its correct column.
            Split text to two columns to avoid hyphenation.
      sysinfo.2
        Remove reference to obsolete libc5
      syslog.2
        Remove some details about obsolete Linux libc
      aio_cancel.3
      aio_error.3
      aio_fsync.3
      aio_read.3
      aio_return.3
      aio_suspend.3
      aio_write.3
        ERRORS: Add/update ENOSYS error
      aio_cancel.3
        Clarify what happens when a request isn't successfully canceled
        Add pointers to aio(7) and sigevent(7)
      dbopen.3
        SYNOPSIS: Add header file <fcntl.h>
            Upstreamed from Debian, and consistent with FreeBSD
            dbopen(3) man page.
      fmemopen.3
        Note details of POSIX.1-2008 specification of 'b' in 'mode'
        BUGS: fmemopen() doesn't correctly set file position in some cases
            If 'mode' is append, but 'size' does not cover a null byte
            in 'buf', then fmemopen() incorrectly sets the initial file
            position to -1, rather than the next byte after the end of
            the buffer.
            See http://sourceware.org/bugzilla/show_bug.cgi?id=13151
        BUGS: fmemopen() incorrectly handles size==0 case
            If size is zero, fmemopen() fails, This is surprising behavior,
            and not specified in POSIX.1-2008.
            See http://sourceware.org/bugzilla/show_bug.cgi?id=11216
            Reported-by; Alex Shinn <alexshinn@gmail.com>
        BUGS: Note silent ABI change for fmemopen() in glibc 2.9
        BUGS: Append mode does not force writes to append
            Append mode correctly sets the initial offset but does
            not force subsequent writes to append at end of stream.
            See http://sourceware.org/bugzilla/show_bug.cgi?id=13152
        BUGS: Note inconsistent treatment of 'b' in 'mode'
            fopen() permits, for example, both "w+b" and "wb+",
            but only the latter is meaningful to fmemopen().
            See http://sourceware.org/bugzilla/show_bug.cgi?id=12836
      fopencookie.3
        Correct description of return for user-supplied 'write' function
            See http://sourceware.org/bugzilla/show_bug.cgi?id=2074
      getaddrinfo.3
        Note that AI_ADDRCONFIG is not affected by loopback addresses
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=660479
      iconv.3
        Upstream useful NOTE from Debian
            Warn the reader that the pointer arguments can't be
            interpreted as C style strings. Also, note possible
            alignment requirements for the referenced bytes sequences,
        Write a better paragraph introducing iconv() and its arguments
      isgreater.3
        Clarify that the arguments to these macros must be real-floating
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=609033
      lio_listio.3
        Clarify that async notification occurs when *all* I/Os complete
      makedev.3
        SYNOPSIS: Correct return types of major() and minor()
            See https://bugzilla.redhat.com/show_bug.cgi?id=754188
            Reported-by; Zdenek Kabelac <zkabelac@redhat.com>
      malloc.3
        SEE ALSO: Add malloc_info(3)
      malloc_get_state.3
        Fix wordos in function names in NAME line
      mallopt.3
        Fix example program
            The example code was a version that was not consistent with
            the shell output shown on the page.
            Reported-bY: Simon Paillard <spaillard@debian.org>
        Restore accidentally omitted line in shell session
        SEE ALSO: Add malloc_stats(3)
      mmap64.3
        Change target of link to mmap.2 (was mmap2.2)
            Upstreamed from Red Hat / Fedora
      realpath.3
        Remove note about Solaris possibly returning a relative path
      syslog.3
        Document behavior when 'ident' argument to openlog() is NULL
            See https://bugs.launchpad.net/ubuntu/+source/manpages/+bug/382096
        Update CONFORMING TO for POSIX.1-2008
            POSIX.1-2008 doesn't change any details, but make
            that more explicit.
      undocumented.3
        Remove some functions that have been documented
      sd.4
        Remove reference to nonexistent scsi(4) page
            Upstreamed from RedHat / Fedora
      sk98lin.4
        Note that this driver was removed in 2.6.28
            See https://bugs.launchpad.net/ubuntu/+source/manpages/+bug/528020
      passwd.5
        Upstream pieces from Red Hat/Fedora
            Note mention of empty password field.
            Add description of "*NP*" in password field.
        Various minor fixes and improvements
      proc.5
        Note that CAP_SYS_ADMIN processes can override file-max
            Upstreamed from red Hat / Fedora
        Document  /proc/[pid]/cgroup
            Upstreamed from Red Hat / Fedora
      resolv.conf.5
        Take a Debian improvement into upstream
      tzfile.5
        Mention timezone directories in DESCRIPTION
            Note that timezone files are usually in /usr/lib/zoneinfo
            or /usr/share/zoneinfo.
        Drop SYNOPSIS
            The SYNOPSIS doesn't correspond to a user-visible file.
        SEE ALSO: Add pointer to glibc source file timezone/tzfile.h
        SEE ALSO: add tzset(3) and tzselect(8)
      ascii.7
        Indent for "troff" makes table too wide
            Fix following from "groff -t -ww ...":
                warning: around line 53: table wider than line width
            Extra indent for "troff" makes the table look misplaced
            (default "ps" output).
      cp1251.7
        table too wide
            From "nroff -ww -t ...":
                warning: around line 44: table wider than line width
            Columns are made narrower (column gutter decreased).
      ipv6.7
        Add ENODEV error for bind() to link-local IPv6 address
      signal.7
        Clarify that SIGLOST is unused
        Comment out crufty BUGS text on SIGLOST
            It must be a very long time since the statement there
            about SIGLOST was true. (The text seems to date back to
            1996.)
        Update architectures for tables of signal numbers
      utf-8.7
        Two clarifications
            This patch clarifies that 0xc0 and 0xc1 are not valid in any UTF-8
            encoding[0], and it also references RFC 3629 instead of RFC 2279.
            [0] In order to have 0xc0, you'd have to have a two-byte encoding
            with all the data bits zero in the first byte (and thus only six
            bits of data), which would be an ASCII character encoded in the
            non-shortest form.  Similarly with 0xc1.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=538641
      ldconfig.8
      nscd.8
        Remove path prefix from NAME line
            Command names shown in NAME are normally just the basename,
            not the full pathname of the command.

-------------------------------------------------------------------
Thu May  3 10:47:45 CEST 2012 - pgajdos@suse.cz

- update to version 3.40
  * New and rewritten pages
      process_vm_readv.2
        New page for process_vm_readv(2) and process_vm_writev(2)
      mcheck.3
        New man page for mcheck(3) and related functions
            Also describes mcheck_check_all(3), mcheck_pedantic(3),
            and mprobe(3)
  * Newly documented interfaces in existing pages
      rcmd.3
        Document "_af" variants of these functions
            Document rcmd_af(), rresvport_af(), iruserok_af(), ruserok_af().
            Also some restructuring and other clarifications.
      rexec.3
        Document rexec_af()
  * New and changed links
      iruserok_af.3
      rcmd_af.3
      rresvport_af.3
      ruserok_af.3
        New links to rcmd.3
      rexec_af.3
        New link to rexec.3
  * Changes to individual pages
      clock_getres.2
        Clarify difference between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
            Note interactions of these two clocks with discontinuous
            adjustments to the system time and NTP/adjtime(2).
      fallocate.2
        Fix description of ENOSYS and EOPNOTSUP errors
            As reported in https://bugzilla.redhat.com/show_bug.cgi?id=680214
      fchmodat.2
        Improve discussion of difference between wrapper and underlying syscall
      gettimeofday.2
        gettimeofday() is affected by discontinuous jumps in the system time
            Advise reader to use clock_gettime(2), if they need a
            monotonically increasing time source.
        SEE ALSO: Add clock_gettime(2)
      prctl.2
        Add PR_TASK_PERF_EVENTS_DISABLE and PR_TASK_PERF_EVENTS_ENABLE
            Add some basic documentation of these operations, with a pointer to
            tools/perf/design.txt for more information.
        Amend details of PR_SET_PDEATHSIG
      ptrace.2
        Note SPARC deviation with respect to get/set regs
            SPARC reverses the use of 'addr' and 'data' for
            PTRACE_GETREGS, PTRACE_GETFPREGS, PTRACE_SETREGS,
            and PTRACE_SETFPREGS.
      send.2
        Document EACCES error case for UDP
      sigaction.2
        Remove mention of raise(3) for SI_USER
            For a long time now, glibc's raise(3) didn't yield SI_USER
            for the signal receiver, so remove mention of raise(3)
            here. The user can deduce the details, if needed, by looking
            at the recently updated raise(3) page.
      aio_cancel.3
        Rewrite RETURN VALUE section to be clearer
      aio_init.3
        Remove extraneous "POSIX" from NAME section
      btree.3
      dbopen.3
      hash.3
      mpool.3
      recno.3
        Note that glibc no longer provides these interfaces
            glibc stopped providing these interfaces with v2.2.
            Nowadays, the user that finds these pages probably wants
            the libdb API, so note this in the page.
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=337581
      fopen.3
        BUGS: Note limitation on number of flag characters parsed in 'mode'
        Note that 'c' and 'e' flags are ignored for fdopen()
            Determined from reading libio/iofdopen.c.
        Document ",ccs=string" feature of 'mode' for fopen()/freopen()
      getgrnam.3
        Fix discussion of _SC_GETGR_R_SIZE_MAX
            The value is not meant to be a maximum (as was specified in
            SUSv3) but an initial guess at the required size
            (as specified in SUSv4).
      getpwnam.3
        Fix discussion of _SC_GETPW_R_SIZE_MAX
            The value is not meant to be a maximum (as was specified in
            SUSv3) but an initial guess at the required size
            (as specified in SUSv4).
      malloc.3
      mallopt.3
      mtrace.3
        SEE ALSO: add mcheck(3)
      memchr.3
        Clarify description, omitting mention of "strings" and "characters"
            The existing text slipped into talking about characters and
            strings, which could mislead readers into thing that, for
            example, searches for the byte '\0' are treated specially.
            Therefore, rewrite in terms of "bytes" and "memory areas".
            At the same time, make a few source file clean-ups.
      mkstemp.3
        Add "mkstemps" and "mkostemps" to NAME line
      posix_openpt.3
        Add some details on use of the slave pathname
            An explicit pointer to ptsname(3) is useful, as is a note
            of the fact that the slave device pathname exists only as
            long as the master device is held open.
      raise.3
        Add some notes on underlying system call that is used
      rcmd.3
        Add some details of the rresvport() 'port' argument
      resolver.3
        Note that many options are documented in resolv.conf(5)
      scandir.3
        Improve EXAMPLE source code: s/0/NULL/ in scandir() call
      strchr.3
        Explain behavior when searching for '\0'
      strerror.3
        Improve strerror_r() description
            POSIX requires that perror() not modify the static storage
            returned by strerror().  POSIX 2008 and C99 both require that
            strerror() never return NULL (a strerror() that always
            returns "" for all inputs is valid for C99, but not for POSIX).
            http://sourceware.org/bugzilla/show_bug.cgi?id=12204
            documents glibc's change to come into compliance with POSIX
            regarding strerror_r() return value.  The GNU strerror_r() use
            of 'buf' was confusing - I ended up writing a test program that
            proves that 'buf' is unused for valid 'errnum', but contains
            truncated "unknown message" for out-of-range 'errnum'.
            See also http://austingroupbugs.net/view.php?id=382
        Correct description of error return for XSI strerror_r()
        Note how to use 'errno' to detect errors when calling strerror()
        Add an example of the kind of string returned by strerror()
      resolv.conf.5
        Document "single-request" option
      inotify.7
        Note buffer size that guarantees being able to read at least one event
        Correct description of size of inotify_event structure
      iso_8859-1.7
        Add "-" for SOFT HYPHEN
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=156154
      netdevice.7
        Document some SIOC configuration ioctls
            This patch adds common but missing SIOC configuration ioctls to
            the netdevice.7 manual pages that are not documented anywhere
            else. SIOCSIFPFLAGS and SIOCGIFPFLAGS are linux-specific. Flag
            values come from Linux 2.6.25 kernel headers for sockios. The
            others are standard BSD ioctls that have always been implemented
            by Linux and were verified from inspecting netdevice.c kernel
            code.
      socket.7
        Correct description of SO_BROADCAST
      tcp.7
    lepton
        Correct description for TCP_MAXSEG on modern kernel
- obsoletes upstreamed resolv.conf.patch

-------------------------------------------------------------------
Tue Apr 24 08:44:57 CEST 2012 - pgajdos@suse.cz

- update to version 3.39
  * New and rewritten pages
      malloc_trim.3
        New man page for malloc_trim(3)
      malloc_usable_size.3
        New man page for malloc_usable_size(3)
  * Newly documented interfaces in existing pages
      prctl.2
        Document PR_SET_MM (new in Linux 3.3)
        Various edits and improvements to Cyrill's patch
  * Changes to individual pages
      epoll_create.2
        Rework discussion of 'size' argument
        Add .SS for description of epoll_create1()
      epoll_wait.2
        Another thread can add to epoll instance while epoll_wait is blocked
            See https://bugzilla.kernel.org/show_bug.cgi?id=43072
        Clarify that epoll_pwait() blocks calling *thread*
        A few wording improvements
      fchmodat.2
        Note difference between glibc wrapper and underlying system call
            The wrapper function has a 'flags' argument (which currently
            serves no purpose), while the underlying system call does not.
      fcntl.2
        Explain behaviour of F_GETLEASE during lease break
        Change type of arg from "long" to "int"
            Various fcntl(2) commands require an integral 'arg'.
            The man page said it must be "long" in all such cases.
            However, for the cases covered by POSIX, there is an
            explicit requirement that these arguments be "int".
            Update the man page to reflect. Probably, all of the
            other "long" cases (not specified in POSIX) should
            be "int", and this patch makes them so. Based on a
            note fromEric Blake, relating to F_DUPFD_CLOEXEC.
      gettimeofday.2
        Reorganize content
            The main change is to move the historical information about
            the 'tz_dsttime' to NOTES.
        Note that compiler issues warnings if 'tv' is NULL
      mmap.2
        Clarify that this system call should not be invoked directly
            See https://bugzilla.kernel.org/show_bug.cgi?id=42892
        Clarify NOTES discussion of mmap() versus mmap2()
      poll.2
        Document negative value in 'fd' field
        Document semantics of passing zero in 'events' field
      ptrace.2
        Various fixes
            For some reason, the PTRACE_TRACEME paragraph talks about some
            general aspects of ptraced process behavior. It repeats the
            "tracee stops on every signal" information even though that was
            already explained just a few paragraphs before. Then it describes
            legacy SIGTRAP on execve().
            This patch deletes the first part, and moves the second part up,
            into the general ptrace description. It also adds
            "If PTRACE_O_TRACEEXEC option is not in effect" to the description
            of the legacy SIGTRAP on execve().
            The patch also amends the part which says "For requests other
            than PTRACE_KILL, the tracee must be stopped." - PTRACE_ATTACH
            also doesn't require that.
      sigaction.2
        Clarify that the use of SI_SIGIO is for Linux 2.2 only
            See also http://sourceware.org/bugzilla/show_bug.cgi?id=6745
      sigprocmask.2
        ERRORS: add EFAULT
      times.2
        ERRORS: Add EFAULT
      div.3
        CONFORMING TO: Add C99
      fread.3
        Clarify further that return value is number of items, not bytes
            See also http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=665780
      getaddrinfo.3
        Correct type of ai_addrlen field
      malloc.3
        SEE ALSO: add malloc_usable_size(3)
        SEE ALSO: Add malloc_trim(3)
      mallopt.3
        Fix text describing M_PERTURB and free()
        SEE ALSO: Add malloc_trim(3)
      memchr.3
        Remove mention of terminating null in description of rawmemchr()
      perror.3
        Note that use of 'sys_errlist' is deprecated
      rcmd.3
        glibc eventually added a declaration of iruserok() in version 2.12
      sysconf.3
        Add mention of _SC_SYMLOOP_MAX
      nologin.5
        nologin must not only exist, but *be readable* to be effective
      nsswitch.conf.5
        Significant rewrites and improvements
            This patch applies to nsswitch.conf.5 in man-pages-3.36.
            My changes almost completely rewrite large sections of the
            man page. They are needed to add clarity, correct grammar,
            reduce confusion, and bring up-to-date with the latest glibc.
            I have checked the man page against the nss source code in
            glibc 2.14.90.
            Historical notes are demoted to the footer.
            The rewrite makes the man page much clearer to
            understand, more authoratitive, and easier to read.
        Light edits to Mark Bannister's changes
      capabilities.7
        Add prctl(PR_SET_MM) to CAP_SYS_RESOURCE
      epoll.7
        Some minor clarifications at start of DESCRIPTION
      netlink.7
        Note cases where nonprivileged users can use netlink multicast groups
            See also https://bugzilla.novell.com/show_bug.cgi?id=754611
      unix.7
        Add a detail on autobind feature
      ld.so.8
        Document effect of hwcaps on search path
            Wording by Aurelien Jarno from Debian glibc's r4701 (2011-06-04).
            Addresses http://bugs.debian.org/622385
- removed upstreamed netlink.patch

-------------------------------------------------------------------
Thu Apr 12 08:35:01 CEST 2012 - pgajdos@suse.cz

- update to version 3.38
  * New and rewritten pages
      get_nprocs_conf.3
        New page documenting get_nprocs_conf(3) and get_nprocs(3)
        Some additions and improvements
      malloc_get_state.3
        New page documenting malloc_get_state(3) and malloc_set_state(3)
      mallopt.3
        New man page for mallopt(3)
      mtrace.3
        Complete rewrite of page, adding much more detail
      scandirat.3
        New page for scandirat(3) (new in glibc 2.15)
  * Newly documented interfaces in existing pages
      posix_memalign.3
        Document aligned_alloc(3)
            aligned_alloc() is new in C11.
        Document pvalloc(3)
      qsort.3
        Add documentation of qsort_r(3)
        Improvements to Mark R Bannister's qsort_r() patch
        Add VERSIONS section for qsort_r()
  * New and changed links
      aligned_alloc.3
        New link to posix_memalign.3
      get_nprocs.3
        Link to new get_nprocs_conf.3 page
      malloc_set_state.3
        Link to new malloc_get_state.3 page
      pvalloc.3
        New link to posix_memalign.3
  * Global changes
  * Various pages
        Global formatting fix: balance .nf/.fi pairs
  * Various pages
        Global fix: place sections in correct order
  * Various pages
        Global fix: Remove duplicated words
            Remove instances of duplicate words found using Justin's
            grep-fu:
                for f in man?/*.[1-9]; do
                    grep -HE ' ([[:alpha:]]{2,} +)\1' "$f" |
                        grep -Evw '(proc|hugetlbfs|XXX*|root|long) *\1';
                done | grep -E --colo ' ([[:alpha:]]{2,} +)\1'
  * Various pages
        Correct order of SEE ALSO entries
  * Changes to individual pages
      futimesat.2
        PROTOTYPE: Correct header file and feature test macro requirements
      keyctl.2
        Strip trailing tabs from source line
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=664688
      ptrace.2
        Document PTRACE_GETEVENTMSG for PTRACE_EVENT_EXEC
        Various fixes to recent updates of this page
      symlinkat.2
        PROTOTYPE: Correct header file
      syscalls.2
        Remove unimplemented system calls from main syscall list
            The unimplemented system calls are in any case noted lower down
            in the page. Also: rearrange the text describing the unimplemented
            system calls.
        Note a few system calls that were removed in Linux 2.6
        Add process_vm_readv(2) and process_vm_writev(2)
      unlinkat.2
        PROTOTYPE: Correct header file
        PROTOTYPE: Add <fcntl.h> for AT_* constants
      utimensat.2
        PROTOTYPE: Add <fcntl.h> for AT_* constants
      copysign.3
        DESCRIPTION: Add a couple of examples
      malloc.3
        NOTES: Add a short discussion of arenas
        Replace discussion of MALLOC_CHECK_ with pointer to mallopt(3)
        SEE ALSO: Add mtrace(3)
        SEE ALSO: add malloc_get_state(3)
      posix_memalign.3
        Rename memalign() argument
            Rename "boundary" to "alignment" for consistency
            with posix_memalign().
        Improve discussion of feature test macros and header files for valloc(3)
      rtnetlink.3
        Fix example code, rta_len assignment should use RTA_LENGTH()
            See also http://bugs.debian.org/655088
      scandir.3
        SEE ALSO: Add scandirat(3)
      sigqueue.3
        Remove rt_sigqueueinfo from TH line
            rt_sigqueueinfo() now has its own manual page, so should not
            be listed in the .TH line of this page.
      tzset.3
        Correct description for Julian 'n' date format
            The Julian 'n' date format counts starting from 0, not 1.
        Add some clarifying remarks to discussion of Julian day formats
      packet.7
        Fix comment on 'sll_hatype' field
      tcp.7
        Correct RFC for TIME_WAIT assassination hazards

-------------------------------------------------------------------
Fri Apr  6 07:10:45 UTC 2012 - pgajdos@suse.com

- amend netlink.7 man page [bnc#754611]

-------------------------------------------------------------------
Fri Mar 23 11:26:27 UTC 2012 - cfarrell@suse.com

- license update: BSD-3-Clause and GPL-2.0+ and MIT
  SPDX

-------------------------------------------------------------------
Mon Mar 12 08:27:51 CET 2012 - pgajdos@suse.cz

- update to version 3.37
  * New and rewritten pages
      getent.1
        New page to document 'getent' binary provided by glibc
  * Changes to individual pages
      bdflush.2
        Note that bdflush() is deprecated, and does nothing
      nfsservctl.2
        Note that this system call was removed in Linux 3.1
      ptrace.2
        add extended description of various ptrace quirks
            Changes include:
            s/parent/tracer/g, s/child/tracee/g - ptrace interface now
            is sufficiently cleaned up to not treat tracing process
            as parent.
            Deleted several outright false statements:
            - pid 1 can be traced
            - tracer is not shown as parent in ps output
            - PTRACE_ATTACH is not "the same behavior as if tracee had done
              a PTRACE_TRACEME": PTRACE_ATTACH delivers a SIGSTOP.
            - SIGSTOP _can_ be injected.
            - Removed mentions of SunOS and Solaris as irrelevant.
            - Added a few more known bugs.
            Added a large block of text in DESCRIPTION which doesn't focus
            on mechanical description of each flag and operation, but rather
            tries to describe a bigger picture. The targeted audience is
            a person which is reasonably knowledgeable in Unix but did not
            spend years working with ptrace, and thus may be unaware of its
            quirks. This text went through several iterations of review by
            Oleg Nesterov and Tejun Heo.
            This block of text intentionally uses as little markup as possible,
            otherwise future modifications to it will be very hard to make.
        Global clean-up of page
            * Wording and formatting fixes to existing text and
              Denys Vlasenko's new text.
            * Various technical amendments and improvements to
              Denys Vlasenko's new text.
            * Added FIXME for various problems with the current text.
        Integrated changes after further review from Denys Vlasenko
      syscalls.2
        Note that nfsservctl(2) was removed in Linux 3.1
        Note that bdflush(2) is deprecated
      capabilities.7
        Add CAP_WAKE_ALARM
        Add various operations under CAP_SYS_ADMIN
        Add perf_event_open(2) to CAP_SYS_ADMIN
        Add VM86_REQUEST_IRQ vm86(2) command to CAP_SYS_ADMIN
        Update CAP_NET_ADMIN with notes from include/linux/capability.h
        Add nfsservctl(2) to CAP_SYS_ADMIN
        Add ioctl(FIBMAP) under CAP_SYS_RAWIO
        Add virtual terminal ioctl()s under CAP_SYS_TTY_CONFIG
        Update CAP_NET_RAW with notes from include/linux/capability.h
        Add F_SETPIPE_SZ case to CAP_SYS_RESOURCE
        Add POSIX messages queues queues_max case to CAP_SYS_RESOURCE
        Update CAP_SYS_RESOURCE with notes from include/linux/capability.h
        SEE ALSO: Add libcap(3)
      ld.so.8
        Add --adit command-line option

-------------------------------------------------------------------
Mon Mar  5 08:37:01 CET 2012 - pgajdos@suse.cz

- update to version 3.36
  * New and rewritten pages
      sendmmsg.2
        New page for sendmmsg(2)
            Some pieces inspired by an initial attempt by Stephan Mueller.
  * Newly documented interfaces in existing pages
      fallocate.2
        Document FALLOC_FL_PUNCH_HOLE
            FALLOC_FL_PUNCH_HOLE was added in Linux 2.6.38,
            for punching holes in the allocated space in a file.
  * Changes to individual pages
      dup.2
        SYNOPSIS: Add "#include <fntl.h>" for O_* constants
      fallocate.2
        Substantial restructuring of DESCRIPTION
            The addition of a second class of operation ("hole punching")
            to the man page made it clear that some significant restructuring
            is required. So I substantially reworked the page, including the
            preexisting material on the default "file allocation" operation.
        Add further details for FALLOC_FL_PUNCH_HOLE
        ERRORS: Add EPERM error case for FALLOC_FL_PUNCH_HOLE
      fork.2
        NOTES: Describe clone() call equivalent to fork()
      fsync.2
        Various improvements
            - explain the situation with disk caches better
            - remove the duplicate fdatasync() explanation in the NOTES
              section
            - remove an incorrect note about fsync() generally requiring two
              writes
            - remove an obsolete ext2 example note
            - fsync() works on any file descriptor (doesn't need to be
              writable); correct the EBADF error code explanation
        Note that some systems require a writable file descriptor
            An edited version of Guillem Jover's comments:
            [While the file descriptor does not need to be writable on Linux]
            that's not a safe portable assumption to make on POSIX in general
            as that behavior is not specified and as such is
            implementation-specific. Some Unix systems do actually fail on
            read-only file descriptors, for example [HP-UX and AIX].
      mount.2
        Removed erroneous statement about MS_RDONLY and bind mounts
      open.2
        Fix grammar in O_DIRECT description
            Some small grammar fixes to the O_DIRECT description.
      pipe.2
        SYNOPSIS: Add "#include <fntl.h>" for O_* constants
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=659750
      sched_rr_get_interval.2
        Update notes on modifying quantum
            Since Linux 2.6.24, it is no longer possible to
            modify the SCHED_RR quantum using setpriority(2).
            (Slight edits to Clemens' patch by mtk.)
        Reordered various pieces of text
        Reworded text of ESRCH error
      send.2
        Add mention of sendmmsg(2)
      sync.2
        PROTOTYPE: Fix return type of syncfs()
      vfork.2
        Clarify what is duplicated in the child
            Add some words to make it clear to the reader that vfork(),
            like fork(), creates duplicates of process attributes
            in the child.
        Note clone() flags equivalent to vfork()
        Add some notes on reasons why vfork() still exists
        Clarify that calling *thread* is suspended during vfork()
        CONFORMING TO: Note that POSIX.1-2001 marked vfork() obsolete
      gets.3
        Document C11 and glibc 2.16 changes affecting gets()
      pthread_sigmask.3
        Fix comment that was inconsistent with code in example program
      sem_wait.3
        EXAMPLE: Remove extraneous line of output from shell session
      wcsnrtombs.3
      wcsrtombs.3
      wcstombs.3
        Fix-ups for e9c23bc636426366d659809bc99cd84661e86464
      core.5
        Document %E specifier for core_pattern
      passwd.5
        s/asterisk/asterisk (*)/ to improve clarity
        Correct note on passwd field value when shadowing is enabled
            When password shadowing is enabled, the password field
            contains an 'x' (not a "8').
      proc.5
        Fix description of fourth field of /proc/loadavg
            SIgned-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
      resolv.conf.5
        Describe syntax used for comments
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=656994
      feature_test_macros.7
        Document _ISOC11_SOURCE
      inotify.7
        Note that 'cookie' field is set to zero when unused
      man.7
        Various fixes for description of NAME section
            As noted by reporter:
            * The code sample given for the NAME section is incomplete because
              the actual content sample is not given.
            * Additionally, the description assumes that the item described is
              a command, which need not be the case.
            * The command makewhatis is not present on my system; the
              documented tool to create the whatis database is called mandb.
            * The description on .SH NAME in man(7) should either copy the
              relevant paragraph of lexgrog(1) or refer to it.
            Reported by: Kristof Zelechovski <giecrilj@stegny.2a.pl>

-------------------------------------------------------------------
Thu Jan 19 10:00:03 UTC 2012 - pgajdos@suse.com

- fix url tag

-------------------------------------------------------------------
Wed Oct  5 11:23:28 CEST 2011 - pgajdos@suse.cz

- update to version 3.35
  * New and rewritten pages
      recvmmsg.2
        New man page for recvmmsg(2)
      setns.2
        New manual page for setns(2)
        Various improvements
  * Global changes
  * Various pages
        Global fix: remove spaces around em-dash
            Normal English typographical convention is not to have
            spaces around em dashes.
  * Various pages
        Global fix: s/null pointer/NULL pointer/
  * Various pages
        Global fix: use ORing
            Use "ORing", not "OR'ing", nor an italic ".IR OR ing".
  * Various pages
        Global fix: consistent use of "null wide character"
            Bring more consistency to the discussion of
            "[terminating] null wide character"
            by writing (at least in the initial use in a page)
            "[terminating] null wide character (L'\0')".
  * Various pages
        Global fix: consistent use of "null byte"
            Bring more consistency to the discussion of
            "[terminating] null byte"
            by writing (at least in the initial use in a page)
            "[terminating] null byte ('\0')".
      mount.2, prctl.2
        s/task/thread/ for consistency with other pages
  * Changes to individual pages
      lseek.2
        CONFORMING TO: Note other systems that have SEEK_HOLE+SEEK_DATA
      recv.2
        Add mention of recvmmsg(2)
      recvmmsg.2
        SEE ALSO: add sendmmsg(2)
      send.2
        CONFORMING TO: POSIX.1-2008 adds MSG_NOSIGNAL
      sigwaitinfo.2
        Note that attempts to wait for SIGKILL and SIGSTOP are silently ignored
      stat.2
        Note POSIX.1-2001 and POSIX.1-2008 requirements for lstat()
        Regarding automounter action, add a reference to fstatat(2)
        Clean up text describing which POSIX describes S_IF* constants
      aio_cancel.3
        Clarify meaning of "return status" and "error status"
      gets.3
        POSIX.1-2008 marks gets() obsolescent
            The page formerly erroneously stated that POSIX.1-2008
            removed the specification of this function.
      mbsnrtowcs.3
        CONFORMING TO: Add POSIX.1-2008
            This function is specified in the POSIX.1-2008 revision.
      regex.3
        Change "terminating null" to "terminating null byte"
      stpcpy.3
      stpncpy.3
        Note that these functions are in POSIX.1-2008
            Update the "CONFORMING TO" sections of these functions to
            note that they are now part of the POSIX.1-2008 standard.
      stpncpy.3
        Change "terminating null" to "terminating null byte"
      strcpy.3
        SEE ALSO: Add stpncpy(3)
      strdup.3
        CONFORMING TO: strndup() is in POSIX.1-2008
      wcpcpy.3
      wcpncpy.3
      wcsnlen.3
      wcsnrtombs.3
        CONFORMING TO: Add POSIX.1-2008
            These functions are specified in the POSIX.1-2008 revision.
      proc.5
        Document /proc/[pid]/ns/
        Some edit's to Eric Biederman's /proc/[pid]/ns/ additions
      capabilities.7
        List setns(2) as an operation allowed by CAP_SYS_ADMIN

-------------------------------------------------------------------
Mon Sep 26 10:45:25 CEST 2011 - pgajdos@suse.cz

- update to version 3.34
  * New and rewritten pages
      rt_sigqueueinfo.2
        New page for rt_sigqueueinfo(2) and rt_tgsigqueueinfo(2)
            This replaces the previous '.so' man page link file for
            rt_sigqueueinfo.2, which linked to this sigqueue() man page.
      cciss.4
        New man page for cciss driver
            I obtained the information in this man page as a consequence
            of having worked on the cciss driver for the past several years,
            and having written considerable portions of it.
        Copyedit by mtk
      hpsa.4
        New man page for the hpsa driver
            I obtained the information in this man page as a consequence
            of being the main author of the hpsa driver
        Copyedits my mtk
  * Newly documented interfaces in existing pages
      fstatat.2
        Document AT_NO_AUTOMOUNT
      lseek.2
        Document SEEK_HOLE and SEEK_DATA
            These flags, designed for discovering holes in a file,
            were added in Linux 3.1. Included comments from Eric
            Blake and Sunil Mushran.
      madvise.2
        Add MADV_HUGEPAGE and MADV_NOHUGEPAGE
            Document the MADV_HUGEPAGE and MADV_NOHUGEPAGE flags added to
            madvise() in Linux 2.6.38.
  * New and changed links
      rt_tgsigqueueinfo.2
        New link to new rt_sigqueueinfo.2 page
      sigqueue.2
        Create link to page that was relocated to section 3
  * Global changes
  * Various pages
        Change reference to "sigqueue(2)" to "sigqueue(3)"
  * Changes to individual pages
      fallocate.2
        ERRORS: Add EPERM and ESPIPE errors
      lseek.2
        Remove suspect note about 'whence' being incorrect English.
      prctl.2
        PR_SET_DUMPABLE makes process non-ptrace-attachable
      readlink.2
        Document using st_size to allocate the buffer
        Added copyright text + changelog note for Guillem Jover's patch
      sched_setscheduler.2
        Document 2.6.39 changes to rules governing changes from SCHED_IDLE policy
            Since Linux 2.6.39, unprivileged processes under the
            SCHED_IDLE policy can switch to another nonrealtime
            policy if their nice value falls within the range
            permitted by their RLIMIT_NICE limit.
      tkill.2
        SEE ALSO: Add rt_sigqueueinfo (2)
      btowc.3, wctob.3
        Add pointers to better, thread-safe alternative functions
            See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=606899
      fwide.3
        Add _ISOC95_SOURCE to feature test macro requirements
            Since glibc 2.12, _ISOC95_SOURCE can also be used to expose
            prototype of this function.
      index.3
        Fix text mentioning terminating null
      pthread_sigqueue.3
        Replace explicit mention of rt_tgsigqueueinfo() with SEE ALSO reference
      sigqueue.3
        Move this page to section 3
            Now that the underlying system call rt_sigqueueinfo(2) is
            properly documented, move sigqueue() to Section 3, since
            it is really a library function.
        Update text in line with existence of new rt_sigqueueinfo.2 page
      wcsnlen.3
        Improve description of 'maxlen' argument
            It's worth clarifying 'maxlen' is in wide-char units, not bytes.
      wprintf.3
        Add _ISOC95_SOURCE to feature test macro requirements
            Since glibc 2.12, _ISOC95_SOURCE can also be used to expose
            prototype of these functions.
      feature_test_macros.7
        Document _ISOC95_SOURCE
            _ISOC95_SOURCE was added in glibc 2.12 as a means
            to expose C90 Amendment 1 definitions.
      ip.7
        Improve description of IP_MTU_DISCOVER
      signal.7
        SEE ALSO: Add rt_sigqueueinfo(2)

-------------------------------------------------------------------
Tue Sep 20 14:20:27 UTC 2011 - pgajdos@suse.com

- updated to 3.33

-------------------------------------------------------------------
Tue Aug  2 13:30:46 UTC 2011 - aj@suse.de

- Remove man3/crypt.3 and crypt_r.3 since those are now provided
  by glibc-devel.

-------------------------------------------------------------------
Mon Dec  6 11:02:39 CET 2010 - pgajdos@suse.cz

- updated to 3.32

-------------------------------------------------------------------
Mon Nov 15 13:10:58 CET 2010 - pgajdos@suse.cz

- updated to 3.31

-------------------------------------------------------------------
Thu Nov  4 09:04:13 CET 2010 - pgajdos@suse.cz

- updated ot 3.30

-------------------------------------------------------------------
Thu Oct 21 08:59:23 CEST 2010 - pgajdos@suse.cz

- updated to 3.29

-------------------------------------------------------------------
Tue Oct 12 07:06:13 UTC 2010 - pgajdos@novell.com

- updated to 3.28

-------------------------------------------------------------------
Thu Sep 23 09:44:29 CEST 2010 - pgajdos@suse.cz

- updated to 3.27

-------------------------------------------------------------------
Tue Sep 14 15:16:38 CEST 2010 - pgajdos@suse.cz

- updated to 3.26

-------------------------------------------------------------------
Tue Jun 22 17:47:32 CEST 2010 - pgajdos@suse.cz

- updated to 3.25
- quotactl.2 manual page was moved from quota to man-pages
  [bnc#587393]

-------------------------------------------------------------------
Mon Mar  1 13:15:57 CET 2010 - pgajdos@suse.cz

- updated to 3.24
- refreshed tty_ioctl.patch

-------------------------------------------------------------------
Thu Nov 19 11:52:52 CET 2009 - pgajdos@suse.cz

- added iconv.1 man-page from debian [bnc#480353]

-------------------------------------------------------------------
Mon Oct  5 08:55:44 CEST 2009 - pgajdos@suse.cz

- updated to 3.23

-------------------------------------------------------------------
Tue Aug 18 12:20:49 CEST 2009 - pgajdos@suse.cz

- added description of single-request into resolv.conf [bnc#531855]
  * resolv.conf.patch

-------------------------------------------------------------------
Thu Aug  6 12:31:42 CEST 2009 - pgajdos@suse.cz

- updated to 3.22

-------------------------------------------------------------------
Thu Jun 18 12:01:54 CEST 2009 - pgajdos@suse.cz

- updated to 3.21

-------------------------------------------------------------------
Tue Mar 10 16:00:04 CET 2009 - pgajdos@suse.cz

- updated to 3.19

-------------------------------------------------------------------
Tue Jan 20 11:53:28 CET 2009 - pgajdos@suse.cz

- updated to 3.17

-------------------------------------------------------------------
Mon Dec 15 15:47:01 CET 2008 - pgajdos@suse.cz

- updated to 3.15, fixes [bnc#441558]

-------------------------------------------------------------------
Mon Nov 24 14:39:56 CET 2008 - pgajdos@suse.cz

- removed host.conf.patch, command mdns on/off no longer available
  [bnc#446017]

-------------------------------------------------------------------
Tue Nov 18 10:32:46 CET 2008 - pgajdos@suse.cz

- updated to 3.13

-------------------------------------------------------------------
Tue Oct 14 10:32:52 CEST 2008 - pgajdos@suse.cz

- updated to 3.11
  * removed dirent-h.patch, issue fixed upstream

-------------------------------------------------------------------
Tue Oct  7 10:14:05 CEST 2008 - pgajdos@suse.cz

- updated to 3.10

-------------------------------------------------------------------
Mon Sep 29 16:54:54 CEST 2008 - pgajdos@suse.cz

- <linux/dirent.h> -> <dirent.h> [bnc#429420]
  * dirent-h.patch

-------------------------------------------------------------------
Thu Sep 11 17:22:38 CEST 2008 - pgajdos@suse.cz

- updated to 3.09

-------------------------------------------------------------------
Mon Sep  8 18:40:02 CEST 2008 - pgajdos@suse.de

- Auto-Update to version 2.79

-------------------------------------------------------------------
Wed Aug 20 12:46:35 CEST 2008 - pgajdos@suse.cz

- updated to 3.07:
  * core.patch removed because was merged upstream
  * splitted man-pages-posix to follow upstream

-------------------------------------------------------------------
Tue Jul 15 11:15:13 CEST 2008 - pgajdos@suse.cz

- added missing include in tty_ioctl.4 [bnc#408439]
  (tty_ioctl.patch)

-------------------------------------------------------------------
Tue May 13 13:55:24 CEST 2008 - pgajdos@suse.cz

- modified man-pages_core.patch according to upstream

-------------------------------------------------------------------
Mon Apr 14 17:55:00 CEST 2008 - pgajdos@suse.de

- Auto-Update to version 2.79

-------------------------------------------------------------------
Thu Apr 10 22:40:02 CEST 2008 - pgajdos@suse.de

- Auto-Update to version 2.68

-------------------------------------------------------------------
Thu Apr 10 13:29:04 CEST 2008 - pgajdos@suse.cz

- updated to 2.79
- added information about piping core dump to the command
  [#377861] (man-pages_core.patch)
- adjusted man-pages_gai.conf-reference.patch

-------------------------------------------------------------------
Thu Nov 22 14:51:37 CET 2007 - pgajdos@suse.cz

- adjusted man-pages_gai.conf-reference.patch after auto-update

-------------------------------------------------------------------
Wed Nov 21 18:40:02 CET 2007 - pgajdos@suse.de

- Auto-Update to version 2.68

-------------------------------------------------------------------
Tue Nov 20 01:57:43 CET 2007 - pgajdos@suse.de

- Auto-Update to version 2.67

-------------------------------------------------------------------
Tue Nov 20 01:40:05 CET 2007 - pgajdos@suse.de

- Auto-Update to version 9]*

-------------------------------------------------------------------
Tue Nov 20 00:40:06 CET 2007 - pgajdos@suse.de

- Auto-Update to version 9]*

-------------------------------------------------------------------
Mon Nov 19 21:40:11 CET 2007 - pgajdos@suse.de

- Auto-Update to version 9]*

-------------------------------------------------------------------
Mon Nov 19 20:40:05 CET 2007 - pgajdos@suse.de

- Auto-Update to version 9]*

-------------------------------------------------------------------
Mon Nov 19 19:40:05 CET 2007 - pgajdos@suse.de

- Auto-Update to version 9]*

-------------------------------------------------------------------
Mon Oct 22 11:40:05 CEST 2007 - pgajdos@suse.de

- Auto-Update to version 2.67

-------------------------------------------------------------------
Mon Oct  8 11:40:05 CEST 2007 - pgajdos@suse.de

- Auto-Update to version 2.66

-------------------------------------------------------------------
Fri Sep 21 17:38:49 CEST 2007 - pgajdos@suse.cz

- removed redundant patch after auto-update
- removed getaddrinfo.3.orig

-------------------------------------------------------------------
Fri Sep 21 15:40:02 CEST 2007 - pgajdos@suse.de

- Auto-Update to version 2.65

-------------------------------------------------------------------
Fri Sep 21 11:07:11 CEST 2007 - pgajdos@suse.cz

- man1p/ipcs.1p was returned back [#274338]

-------------------------------------------------------------------
Fri Sep 14 09:40:59 CEST 2007 - pgajdos@suse.cz

- added gai.conf(5) [#310290]
- added reference to it in getaddrinfo(3) (gai.conf-reference.patch)

-------------------------------------------------------------------
Fri Aug 10 11:57:42 CEST 2007 - pgajdos@suse.cz

- shortened wrong_references.patch
- added fdupes stuff

-------------------------------------------------------------------
Fri Aug 10 09:40:02 CEST 2007 - pgajdos@suse.de

- Auto-Update to version 2.64

-------------------------------------------------------------------
Sat Jul 21 21:08:05 CEST 2007 - pgajdos@suse.cz

- repared some wrong .so references
  * wrong_references.patch
- some minor spec file changes

-------------------------------------------------------------------
Fri Jul 20 10:40:01 CEST 2007 - pgajdos@suse.de

- Auto-Update to version 2.63

-------------------------------------------------------------------
Fri Jul 13 13:40:02 CEST 2007 - pgajdos@suse.de

- Auto-Update to version 2.62

-------------------------------------------------------------------
Tue Jul 10 09:37:35 CEST 2007 - kukuk@suse.de

- Auto-Update to version 2.61

-------------------------------------------------------------------
Tue Jul  3 13:04:26 CEST 2007 - pgajdos@suse.cz

- update to 2.60 [#288732]

-------------------------------------------------------------------
Thu May 31 10:58:59 CEST 2007 - pgajdos@suse.cz

- workaround in spec file: remove deprecated 
  man1p/ipcs.1p [#274338]

-------------------------------------------------------------------
Fri Dec  1 08:40:08 CET 2006 - kukuk@suse.de

- Auto-Update to version 2.43

-------------------------------------------------------------------
Sat Nov 25 16:40:16 CET 2006 - kukuk@suse.de

- Auto-Update to version 2.42

-------------------------------------------------------------------
Sat Oct 14 14:40:07 CEST 2006 - kukuk@suse.de

- Auto-Update to version 2.41

-------------------------------------------------------------------
Wed Oct 11 17:40:06 CEST 2006 - kukuk@suse.de

- Auto-Update to version 2.40

-------------------------------------------------------------------
Sun Aug  6 08:40:05 CEST 2006 - kukuk@suse.de

- Auto-Update to version 2.39

-------------------------------------------------------------------
Fri Aug  4 12:40:05 CEST 2006 - kukuk@suse.de

- Auto-Update to version 2.38

-------------------------------------------------------------------
Thu Aug  3 14:40:07 CEST 2006 - kukuk@suse.de

- Auto-Update to version 2.37

-------------------------------------------------------------------
Thu Jul 27 17:09:02 CEST 2006 - kukuk@suse.de

- Remove nscd.conf(5) patch, is now upstream

-------------------------------------------------------------------
Mon Jul 17 02:40:05 CEST 2006 - kukuk@suse.de

- Auto-Update to version

-------------------------------------------------------------------
Tue Jul  4 11:28:48 CEST 2006 - jreuter@suse.de

- Adding previously undocumented nscd options to nscd.conf(5)
  (#173228)

-------------------------------------------------------------------
Tue Jun 20 17:40:06 CEST 2006 - kukuk@suse.de

- Auto-Update to version 2.34

-------------------------------------------------------------------
Tue May 30 18:40:21 CEST 2006 - kukuk@suse.de

- Auto-Update to version 2.33

-------------------------------------------------------------------
Wed May 17 11:28:49 CEST 2006 - kukuk@suse.de

- Update to version 2.32
  - document all *at() functions
  - lot of small corrections about error handling in various places

-------------------------------------------------------------------
Mon Apr 24 11:26:21 CEST 2006 - kukuk@suse.de

- Auto-Update to version 2.29

-------------------------------------------------------------------
Sat Mar 25 06:44:12 CET 2006 - autobuild@suse.de

- Auto-Update to version 2.27

-------------------------------------------------------------------
Tue Mar 21 00:40:11 CET 2006 - autobuild@suse.de

- Auto-Update to version 2.26

-------------------------------------------------------------------
Fri Mar  3 12:02:45 CET 2006 - kukuk@suse.de

- Update to version 2.25
  - New pages describing POSIX message queue API

-------------------------------------------------------------------
Tue Feb 14 16:07:51 CET 2006 - kukuk@suse.de

- Update to version 2.23

-------------------------------------------------------------------
Tue Jan 31 12:27:13 CET 2006 - kukuk@suse.de

- Remove quotactl.2 (is part of quota package)
- Update to version 2.21

-------------------------------------------------------------------
Wed Jan 25 21:25:07 CET 2006 - mls@suse.de

- converted neededforbuild to BuildRequires

-------------------------------------------------------------------
Tue Jan 17 08:11:36 CET 2006 - kukuk@suse.de

- Make it a not nearly-all package (and really noarch)

-------------------------------------------------------------------
Tue Jan 17 08:09:45 CET 2006 - kukuk@suse.de

- Auto-Update to version 2.20

-------------------------------------------------------------------
Tue Mar 29 09:24:09 CEST 2005 - kukuk@suse.de

- Add shadow.5 manual page

-------------------------------------------------------------------
Thu Oct 14 01:04:42 CEST 2004 - ro@suse.de

- make patches apply again

-------------------------------------------------------------------
Fri Sep 24 15:08:51 CEST 2004 - kukuk@suse.de

- host.conf: document mdns option

-------------------------------------------------------------------
Wed May 26 02:03:25 CEST 2004 - ro@suse.de

- remove .orig files

-------------------------------------------------------------------
Tue May 25 16:29:13 CEST 2004 - thomas@suse.de

- added changes from SLES8 for EAL3+ needed for EAL4+ too

-------------------------------------------------------------------
Fri May 21 10:57:54 CEST 2004 - kukuk@suse.de

- Update to manual page 1.67 (Update POSIX copyright)

-------------------------------------------------------------------
Mon Apr  5 16:45:59 CEST 2004 - kukuk@suse.de

- Remove ioctl_list.2 manual page for kernel 1.3 to not confuse
  ISVs [Bug #38208]

-------------------------------------------------------------------
Mon Feb 23 09:53:11 CET 2004 - kukuk@suse.de

- Fix .so reference for strtoull.3p

-------------------------------------------------------------------
Thu Jan 29 09:59:19 CET 2004 - kukuk@suse.de

- Add man?p directories to filelist

-------------------------------------------------------------------
Wed Jan 28 17:08:23 CET 2004 - kukuk@suse.de

- Cleanup specfile

-------------------------------------------------------------------
Tue Jan 27 10:46:31 CET 2004 - kukuk@suse.de

- Install POSIX manual pages, too

-------------------------------------------------------------------
Fri Aug 29 00:58:49 CEST 2003 - ro@suse.de

- updated specfile

-------------------------------------------------------------------
Wed Aug 13 09:45:49 CEST 2003 - kukuk@suse.de

- Revert last change

-------------------------------------------------------------------
Tue Aug  5 22:34:20 CEST 2003 - ro@suse.de

- fix test

-------------------------------------------------------------------
Tue Aug  5 19:02:39 CEST 2003 - ro@suse.de

- don't stop for missing man-pages present in system

-------------------------------------------------------------------
Thu Feb 13 20:11:49 CET 2003 - olh@suse.de

- correct example in dlopen manpage

-------------------------------------------------------------------
Fri Mar  1 09:47:22 CET 2002 - ro@suse.de

- no COPYING file in source anymore, adapt specfile

-------------------------------------------------------------------
Mon Apr  9 17:48:34 CEST 2001 - kukuk@suse.de

- Next try.

-------------------------------------------------------------------
Sat Apr  7 14:19:17 CEST 2001 - kukuk@suse.de

- Fix compression of manual pages

-------------------------------------------------------------------
Thu Mar 29 16:31:40 CEST 2001 - kukuk@suse.de

- Make sure we don't have manual pages with a .so refernce to a
  non-existing manual page [Bug #5061]

-------------------------------------------------------------------
Sun Dec 10 08:39:47 CET 2000 - kukuk@suse.de

- Fix use of RPM macro

-------------------------------------------------------------------
Tue Oct 31 09:31:50 CET 2000 - kukuk@suse.de

- Rename ldpman to man-pages 
- Use bzip2 version

-------------------------------------------------------------------
Wed Jan  5 19:13:36 CET 2000 - kukuk@suse.de

- Mark COPYING and README.FSF as doc
- Move from /usr/man to /usr/share/man

-------------------------------------------------------------------
Mon Jun  7 17:07:24 MEST 1999 - bs@suse.de

- made package "noarch"

-------------------------------------------------------------------
Thu Jan 14 11:27:10 MET 1999 - bs@suse.de

- don't include those man pages, that are already in the system.

-------------------------------------------------------------------
Wed Oct 15 12:35:20 MEST 1997 - ro@suse.de

- ready for autobuild

Places

File man-pages.changes of Package man-pages (Revision d8b2c83f16a5c90090e94b107fdd731f)

Places