File ModemManager.changes of Package ModemManager

Overview Repositories Revisions Requests Users Attributes Meta

File ModemManager.changes of Package ModemManager (Revision fde9f4a1a2c22f638360b2faf3793315)

Currently displaying revision fde9f4a1a2c22f638360b2faf3793315 , Show latest

-------------------------------------------------------------------
Mon Nov  2 08:50:31 UTC 2020 - Petr Vorel <pvorel@suse.cz>

- Update to version 1.14.6:
  + Modem interface:
    - Added support for AT-based and/or QMI-based 5G devices
    - Deprecated the MM_MODEM_CAPABILITY_LTE_ADVANCED capability
  + Bearer interface:
    - Added additional 'attempts', 'failed-attempts', 'total-rx-bytes',
      'total-tx-bytes' and 'total-duration' values in the 'Stats' property
      exposed by the Bearer objects.
  + Daemon:
    - Switched to 'STRICT' filter mode by default.
    - Added a new implicit whitelist rules applicable in 'STRICT' filter mode.
    - Updated the probing logic to make sure we don't attempt a re-probe when
    the device is gone.
    - Updated daemon logging.
  + AT:
    - Moved the charset definition logic to the initialization phase instead
      of the enabling phase.
    - Updated manual registration operation
  + QMI:
    - Devices using the LOC service for GNSS will now also setup the list of
      required NMEA traces before starting the engine.
    - Update carrier code if registration changes from one roaming operator
      to another.
    - Explicitly disable autoconnect during modem enabling phase, because it
      interferes with our connection management logic.
    - Fallback to raw-ip if WDA Get Data Format requests arguments, as in most
      new 5G devices.
    - Updated to always use the asynchronous close() operation.
    - Handle disconnection indications during connection attempts.
  + MBIM:
    - Update carrier code if registration changes from one roaming operator to
      another.
    - Implement reset in Intel-based and Qualcomm-based devices.
    - Avoid LTE attach config/status if unsupported.
    - Updated to make sure all allocated QMI CIDs are released during shutdown.
  + SIM interface:
    - Don't allow sending PIN/PUK if not required.
  + 3GPP interface:
    - Fixed manual re-registration to the same operator.
  + CDMA interface:
    - Don't allow multiple concurrent activation attempts.
    - Disallow empty carrier code in automatic activation.
  + Bearer interface:
    - Updated to avoid connection checks or stats updates while disconnecting.
  + libmm-glib:
    - New 'mm_location_gps_nmea_get_traces()' method to retrieve a NULL
      terminated array of strings with all cached NMEA traces.
    - Deprecated the 'mm_location_gps_nmea_build_full()' method.
  + mmcli:
    - Added a new 'any' lookup keyword for the --modem and --sim options, useful
      when the system is only expected to have one single device.
  + Plugins:
    - broadmobi: new plugin, right now just with port type hints for the BM818.
    - foxconn: new plugin to support the T77W968 (both with and without eSIM).
    - dell,dw5821e: added support for the DW5821e with eSIM variant.
    - huawei: don't delay reporting network initiated disconnects.
    - huawei: try to read port type hints from interface descriptions.
    - huawei: avoid using the QCDM port during a voice call.
    - cinterion: skip sim ready check for modules that don't support it.
    - cinterion: implemented radio/band handling for LTE modems.
    - cinterion: added Signal interface support bsaed on AT^SMONI.
    - cinterion: added support for MBIM based devices like the PLS62-W.
    - quectel: updated to detect SIM hot swap via +QUSIM URCs.
    - fibocom: added support for QMI based devices like the FM150.
    - ublox: ignore error when disconnecting last LTE bearer.
    - ublox: implement support to enable and detect +UUDTMF URCs.
    - ublox: added blacklist rules for GPS modules in the plugin itself.
    - sierra: implement manual and automatic CDMA activation.
    - novatel: implement manual and automatic CDMA activation.
  + Build improvements
  + Update dependencies (mbim: >= 1.24.0, qmi: >= 1.26.0)
- Add BuildRequires libxslt-tools (xsltproc required)
- Update config file path: mm-dell-dw5821e-carrier-mapping.conf
  => mm-foxconn-t77w968-carrier-mapping.conf (see d7d2b910 ("foxconn: new
  plugin to support the T77W968"))

-------------------------------------------------------------------
Sat May  9 13:16:14 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Update to version 1.12.10:
  + mmcli:
    - Add missing 'allowed-auth' bearer property in the output.
    - Remove non-existent --list-bearers option from manpage.
  + introspection: Use the correct node name for the ModemManager1
    object.
  + Modem interface: Allow Command() while in Failed state.
  + MBIM: Fix segfault when loading capabilities.
  + Plugins: huawei: updated HCSQ regex to match unquoted response.

-------------------------------------------------------------------
Sat Mar 14 09:26:17 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Update to version 1.12.8:
  + Plugin manager:
    - Updated logic to allow new ports added to a device up to
      1500ms since last port was added.
  + Voice interface:
    - Match calls in call list by number.
    - Don't report an empty list if +CLCC for any reason fails.
    - Expect in-call URCs also in secondary port.
    - Allow optional extra CR in in-call URCs.
  + Kernel device:
    - Fix looking up for interface details in udev-based builds.
  + Huawei:
    - Allow reading port type hints from USB interface descriptions.
    - Fix segfault if device is removed while probing is ongoing.
  + Several other minor fixes.

-------------------------------------------------------------------
Wed Feb 12 17:49:35 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Update to version 1.12.6:
  + SIM: Updated logic to avoid sending PIN/PUK to the SIM card
    when not required (e.g. if already unlocked).
  + Simple interface: Avoid aborting connection if SIM-PUK2 locked,
    as PIN2/PUK2 doesn't prevent us from getting connected.
  + Location interface: Fixed memory leak happening as soon as a
    position fix was obtained and gps-raw location source was
    enabled.
  + Core:
    - Fixed handling of 0x00 bytes at the end of GSM encoded
      strings.
    - Fixed cleaning up 'timed-out' signal on the serial port
      objects.
    - Fixed logic that closes MBIM ports during cleanup.
  + Several other minor fixes and memory leak plugs.
- Changes from version 1.12.4:
  + Core: Added missing ME error codes when building GError
    variables for the MM_MOBILE_EQUIPMENT_ERROR domain.
  + Bearer: Avoid connection checks or stats updates while
    disconnecting.
  + Serial port: Fix segfault when port flash operation gets
    cancelled.
  + Simple interface: Fix the ongoing connection cancellable
    handling.
  + Voice interface: Fix segfault when voice support check fails.
  + QMI: Fixed several memory leaks, including a severe one
    happening when multiple GPS sources (e.g. raw and nmea) were
    enabled at the same time.
  + Plugins: ublox: ignore errors when attempting to disconnect
    last bearer.
  + mmcli: Allow "yes" and "no" as boolean strings.
  + Several other minor fixes and memory leak plugs.
- Changes from version 1.12.2:
  + Simple interface: Avoid assertion on the ongoing connect
    cancellable.
  + Plugin manager:
    - Fix waiting the minimum probing time.
    - Explicitly cancel timeouts when device probing is cancelled.
    - Disable lazy plugin loading, we now require all missing
      symbols to be resolved at loading time for a plugin to
      correctly be loaded.
  + Bearer: Avoid reporting disconnection error if trying to
    disconnect a bearer that is already disconnected.
  + MBIM: Completely skip LTE attach config/status if unsupported.
  + QMI:
    - Make current settings mandatory when using 'static'
      addressing.
    - Handle disconnection indications during connection attempt.
    - Explicitly close QMI port during disconnection if it was
      opened during a connection attempt.
  + Plugins:
    - huawei: avoid using QCDM port during a voice call.
    - sierra: added port type hints for the EM7565.
    - dell,dw5821e: added support for the DW5821e with eSIM
      variant.
  + mmcli: Fix printing empty value lists in human-friendly output.
  + Several other minor fixes and memory leak plugs.

-------------------------------------------------------------------
Wed Nov  6 20:40:26 UTC 2019 - Martin Hauke <mardnh@gmx.de>

- Update to version 1.12.0
  + Modem interface:
    - Updated logic to avoid assuming that setting bands or modes
      is immediate, the daemon will now actively monitor for those
      updates to happen before returning success.
  + 3GPP interface:
    - libmm-glib: deprecated the mm_pco_list_free() helper method.
  + Simple interface:
    - api,libmm-glib: deprecated the 'subscription state' property.
  + Location interface:
    - Fixed 'unknown' lat/long/alt numeric values.
    - Added support for MSB A-GPS in addition to MSA A-GPS.
  + Voice interface:
    - Improved voice call management with call id detection and
      tracking.
    - Improved detailed call state transitions on generic modems
      that support call list polling.
    - Added support for GSM supplementary services, including call
      waiting, call transfer, call deflection, multiparty calls...
    - Added emergency call support, allowing voice call to
      emergency numbers even without SIM or with SIM-PIN locked.
    - Deprecated all properties except for 'number' in the
      CreateCall() method.
  + Messaging interface:
    - Updated to report SMS timestamps in correct ISO8601 format.
  + Bearer:
    - Improved unused CID lookup to allow selecting non-sequential
      CIDs.
    - Disabled all AT protocol based context monitoring when PPP
      is used for the connection, in order to properly sync with
      pppd, which should be the one detecting the disconnections
  + QMI:
    - Improved support to list stored firmware images in Sierra
      devices.
    - Added additional lock check retries on 'SIM not inserted'
      errors.
    - Updated explicit registration attempt to report success only
      when the target requested network is registered.
    - Added MSB A-GPS support.
    - Implemented automatic carrier configuration selection using
      PDC service (already in 1.10.2).
  + mmcli:
    - New machine-readable JSON output with '--output-json'.
    - Updated to allow using the modem UID to specify SIM
      operations.
  + udev:
    - New ID_MM_PORT_TYPE_AUDIO generic udev tag to identify ports
      that should be used for in-band audio.
    - Removed support for the ID_MM_PLATFORM_DRIVER_PROBE udev
      tag, as it is no longer required given that the more generic
      explicit whitelist may be used to flag which devices should
      be probed.
    - Renamed ID_MM_DEVICE_MANUAL_SCAN_ONLY to
      ID_MM_TTY_MANUAL_SCAN_ONLY, given that the tag only applies
      to TTYs.
    - ID_MM_DEVICE_IGNORE is no longer used internally in
      ModemManager, and is instead targeted to users that want to
      explicitly ignore specific devices regardless of what filter
      type is in use (already in 1.10.6).
  + dbus:
    - Updated to always report the registered
      MM_CORE_ERROR_CANCELLED error instead of the implicit
      G_IO_ERROR_CANCELLED ones generated by GLib.
  + GObject introspection:
    - Fixed setup to explicitly skip all non-API methods.
  + Plugins:
    - tplink: new plugin.
    - dlink: new plugin.
    - xmm: added MSB A-GPS support.
    - dell,dw5821e: update to allow unmanaged GPS support on the
      TTY even when raw/NMEA GPS is enabled via QMI/LOC.
    - quectel: updated to allow TTY-only devices.
    - telit: added GPS support.
    - telit: improved band management with #BND.
    - simtech: added improved voice call support.
    - simtech: added support for LTE devices.
    - simtech: improved signal quality reporting logic.
    - simtech: added GPS support for the SIM7000/SIM7600 family.
    - cinterion: added support for time updates.
    - cinterion: added improved voice call support.
    - ublox: added improved voice call support.
    - ublox: improved band management with UBANDSEL.

-------------------------------------------------------------------
Fri Nov  1 14:10:52 UTC 2019 - Martin Hauke <mardnh@gmx.de>

- Update to version 1.10.8:
  + Polkit policy:
    + Added several missing methods to the policy rules.
    + Use the explicit Firmware policy for all firmware operations.
    + Updated USSD policy to require user authentication in strict
      mode.
  + systemd service:
    - Always start after polkit service when policy control is
      enabled.
  + Broadband modem:
    - Fixed signal quality reporting when +CSQ is used.
  + 3GPP:
    - Fixed reporting 'denied' registration state.
  + QMI:
    - Fixed NAS SSP support check during supported capability loading.
  + Simple interface:
    - Allow one single ongoing Connect() attempt.
    - Fixed Disconnect() when an explicit bearer path is given.
  + mmcli:
    - Fixed key-value output when printing array with 10 elements.
  + Plugins:
    - simtech: added port type hints for the SIM7000/SIM7600 family.
    - x22x: added support for the Alcatel X602D.
    - telit: increased timeout for AT#REBOOT.
    - quectel: fixed port type hints for the EG91.
    - quectel: added port type hints for the BG96.
- Update to version 1.10.6:
  + Bearer: if connecting a bearer with PPP method, require upper layers
    to disconnect the bearer explicitly and completely ignore the
    connectivity checks performed by the modem itself. This makes sure
    that the TTY is not reused by ModemManager before pppd has finished
    using it.
  + Serial port:
    - Fix serial port flash cancellation logic to avoid assertion if the
      device gets unplugged during the flash operation.
    - Fix serial port reopen logic to flag the port as forced-closed if
      the reopening fails, to avoid assertion if the device gets
      unplugged during the reopen operation.
    - Avoid warning when signals are disconnected automatically during
      last object unref.
  + SMS:
    - Initialize common fields early for multipart messages, without
      waiting for the last part to arrive.
  + 3GPP:
    - Report consolidated registration state as DENIED if all the other
      ones are either idle or unknown.
  + udev:
    - Updated ID_MM_DEVICE_IGNORE to make it really a user-usable tag,
      applicable not only to TTY devices but to any kind of device
      (e.g. to blacklist MBIM modems); and also applicable under any
      kind of filter mode (including 'strict' mode).
  + Filter:
    - Added new 'explicit blacklist' filter rule, by default enabled for
      all filter modes and controlled with the
      MM_FILTER_RULE_EXPLICIT_BLACKLIST envvar.
    - Added new 'plugin whitelist' filter rule, enabled exclusively in
      'strict' filter mode, which allows us to automatically flag for
      probing those devices that are flagged with specific
      plugin-selected udev tags or which have vid:pid pairs registered
      as allowed in the plugins.
    - Updated the 'AT-capable ttyACM' filter rule, so that we only
      process and probe the serial port if the device also exposes other
      ports (serial, cdc-wdm, net) that ModemManager may process. This
      fix should allow us to automatically ignore Arduino devices that
      wrongly report themselves as speaking AT protocol in the ttyACM
      port.
  + QMI:
    - Fix segfault while updating bands and the device doesn't support
      the 'extended LTE band preference' TLV.
  + MBIM:
    - Fix segfault while processing empty USSD responses.
  + libmm-glib:
    - Properly handle NULL pointer on MMFirmwareUpdateSettings.
  + Plugins:
    - sierra: added port type hints for the MC74xx family.
    - telit: added port type hints for the ME910 and the EG91.
    - cinterion: added port type hints for the PLS8.
- Update to version 1.10.4:
  + QMI:
    - Fix assertion when cleaning up event report indications.
  + MBIM:
    - Fix detecting errors in "Register State Set" responses.
  + 3GPP interface:
    - Use correct finish() method to complete user registration.
  + Plugins:
    - u-blox: fix segfault when UACT? returns empty band list.
- Update to version 1.10.2:
  + Carrier configuration reporting and automatic selection.
  + Manager interface:
    - Fixed inhibition alloc/dealloc mixup.
  + Modem interface:
    - New 'CarrierConfiguration' property that shows which is the
      currently selected carrier configuration in the device, if
      known.
    - New automatic carrier configuration selection logic, based
      on per-device or per-vendor mapping.
  + Messaging interface:
    - Flush SMS list update before notifying added/removed signals.
  + SMS:
    - Fixed sending binary PDUs via AT commands when other AT command
      operations are scheduled at the same time.
  + QMI:
    - Increased the number of open retries from 10 to 20, required
      e.g. for the Telit LM940/960 modems.
    - Implemented QMI PDC based carrier config loading and automatic
      switching.
  + Plugins:
    - dell: added port type hints for the DW5820e.
    - dell: use QMI DMS extension method to load properly formatted
      firmware version strings.
    - quectel: added port type hints for the EG06.
    - ublox: added alternative port type hints for the LISA/SARA-U2.
    - telit: added support for MBIM-based telit modems.
  + mmcli:
    - Updated --monitor-state to report modem removal.
  + Several memory leak fixes in different modules.
- Run testsuite

-------------------------------------------------------------------
Sun Mar 17 09:38:26 UTC 2019 - Jan Engelhardt <jengelh@inai.de>

- Reduce %systemd_requires to %systemd_ordering:
  %service_* can handle its absence.
- Rewrite summaries not to rely on em dash grammar.
- Do build without requiring bash-completion.

-------------------------------------------------------------------
Sat Jan 26 10:04:30 UTC 2019 - bjorn.lie@gmail.com
  
- Update to version 1.10.0:
  + udev:
    - Consolidated common tag names among all the supported
      plugins. E.g. ID_MM_PORT_TYPE_GPS, ID_MM_PORT_TYPE_AT_*,
      ID_MM_PORT_TYPE_QCDM... All these generic tags are included
      as symbols in the API, and compatibility will be maintained
      for these. Custom setups of ModemManager relying on
      previously available per-plugin udev tags may need to
      manually port them to this new generic subset.
    - New tag to allow specifying flow control settings to use in
      serial ports.
  + Core:
    - Avoid probing other protocols on TTYs tagged in udev with
      specific port type tags (e.g. avoid probing QCDM if a port is
      tagged as AT). This allows faster port probing and modem
      detection for known modem layouts.
    - Implemented support to enable and handle +CGEV URCs for
      asynchronous connection state updates in AT-controlled
      devices.
  + Manager interface:
    - New runtime daemon version reporting.
    - New support for requesting device inhibition, e.g. so that
      ModemManager stops completely using a modem device until the
      inhibition is released. This feature is implemented to allow
      fwupd taking over of a device completely for as long as it
      needs during a firmware update.
  + Modem interface:
    - All methods are always connected, even in Failed state.
    - Allow parallel Enable()/Disable() calls.
    - Deprecated redundant ListBearers() method, the read-only
      Bearers property is already showing the same information.
  + Bearer interface:
    - New 'BearerType' property, e.g. to specify whether a bearer
      is the initial LTE default bearer or not.
    - Deprecated 'number' field in bearer settings. Applications do
      not need to send the 'number' field in Bearer.Connect() or in
      Modem.Simple.Connect(), as the setting is totally ignored.
  + mmcli:
    - New 'key-value' output, easier to parse by scripts than the
      default.
    - Removed redundant '--location-get-XXX' actions, as the
      '--location-get' already reports the location information for
      all sources.
    - Removed redundant '--simple-status' action, as the same
      information can be obtained through different mmcli
      operations.
    - New manager '--inhibit-device' action and modem-specific
      '--inhibit', to allow requesting device inhibition.
  + 3GPP interface:
    - New support for exposing the network reported Protocol
      Configuration Options (PCO), to be used instead of the new
      deprecated Subscription State property.
    - New support for exposing the initial LTE default bearer
      status.
    - New support for configuring the initial LTE default bearer
      settings.
  + Location interface:
    - New LTE Tracking Area Code (TAC) in 3GPP location
      information.
    - New support for injecting assistance data (e.g. Qualcomm
      XTRA) into the GNSS engine, useful when there is no mobile
      connection to use MSA A-GPS.
  + Firmware interface:
    - Support for reporting firmware update support properties,
      e.g. specifying which update methods are supported. This
      information will be consumed by fwupd in order to allow
      upgrading firmware in devices managed by ModemManager.
  + Voice interface:
    - Multiple improvements and fixes in the voice call management
      logic implemented with generic AT commands.
    - Added AudioPort and AudioFormat properties to the Call
      object.
    - Added new generic audio channel setup/cleanup handlers in the
      Call object.
  + QMI:
    - New LOC service based GNSS support, including A-GPS setup via
      SUPL server.
    - New support for the "extended" LTE band list.
    - New support for reading IMSI and ICCID with the UIM service.
  + MBIM:
    - Implemented support for processing Protocol Configuration
      Options using Microsoft-defined Basic Connect Extensions.
    - Implemented support for LTE attach status and configuration
      using Microsoft-defined Basic Connect Extensions.
    - Implemented support for the extended signal interface and for
      3GPP location details using the AT&T specific service.
    - Implemented support for 3GPP USSD operations using the
      standard USSD service.
    - For Qualcomm-based MBIM devices, those with QMI-over-MBIM
      support, a whole new set of features is now available,
      including: QMI LOC/PDS location support, allowed/preferred
      mode management, frequency band selection, power management
      operations...
  + Plugins:
    - xmm: new XMM plugin, with shared logic (allowed/preferred
      mode management, frequency band selection, power management
      operations, extended signal quality reporting, GPS/A-GPS...)
      for Intel XMM based devices.
    - fibocom: new plugin, with support for generic MBIM and
      XMM-based devices.
    - dell: added support for XMM-based devices, like the DW5820e.
    - dell: added custom support for the DW5821e, including
      'unmanaged' GPS and firmware update integration details.
    - cinterion: new shared interface to include all logic shared
      between Option and Option/HSO devices.
    - sierra-legacy: implemented connection monitoring support.
    - u-blox: added support for extended call state transitions.
    - u-blox: added CDC-ECM support for SARA/LISA-U2xx modems.
    - altair-lte: migrated from SubscriptionState to PCO.
- Changes from version 1.8.0:
  + New 'filter policy' setting in the ModemManager daemon to
    decide which ports are probed and how. Currently these levels
    are defined:
    - WHITELIST-ONLY: Only devices or ports explicitly whitelisted
      with the new 'ID_MM_DEVICE_PROCESS' udev tag are probed.
    - DEFAULT: All ports are allowed to be probed except for the
      ones explicitly greylisted as RS232 adapters or completely
      blacklisted. This is the default approach that was used until
      now, and the default as well in this release if a different
      one isn't requested.
    - STRICT: The daemon defines a set of heuristics to try to
      detect modems and ports to probe. Only the TTY ports that are
      very very likely to be modem ports are probed, therefore
      completely avoiding the need of having a separate blacklist
      or RS232 adapter greylist. But note that this policy may end
      up ignoring some devices, like TTY controlled modems without
      an associated network port.
    - PARANOID: This is equivalent to running the STRICT mode but
      also applying the blacklist and RS232 greylist filters
      explicitly.
  + Device 'naming'. This release includes logic to allow 'naming'
    devices with the ID_MM_PHYSDEV_UID udev tag, so that the names
    can then be used in e.g. mmcli and also exposed in the 'Device'
    property in the Modem interface. This new setup makes it
    possible to give the devices unique names that are kept across
    reboots.
  + Allow skipping the automatic scan for devices in the daemon
    with the new '--no-auto-scan' daemon option. Instead, the
    daemon may be called with the '--initial-kernel-events=[PATH]'
    option including a predefined list of ports or otherwise get
    the port additions reported during runtime with the mmcli
    --report-kernel-event=[] command.
  + Allow building and running without 'udev'. In this setup, the
    previously explained '--no-auto-scan' is enabled by default, so
    ports are not automatically detected .Note that this setup is
    not suggested for standard distributions: if udev is available
    in the system, it is the preferred method to manage the port
    addition and removal.
  + SIM hot swap. The core includes the needed logic to support SIM
    hot swap in the different devices, although for now it's only
    tested for Telit and MBIM modems. If a SIM hot swap is
    detected, the modem is flagged as failed and reprobed from
    scratch.
  + Connection status monitoring logic. In order to try to detect
    network initiated disconnections, a generic setup is provided
    to plugins so that they can implement explicit connection
    status checks that would be executed periodically.
  + New support for 3GPP CSFB states and operation modes. We now
    support registration states reported as "SMS only" or "CSFB not
    preferred", and provide APIs to set and get the "UE mode of
    operation for EPS".
  + Build and system:
    - Updated the systemd service file with additional security
      related rules.
    - Added support for systemd journal logging.
    - Updated most of the code to use GTask instead of the
      deprecated GSimpleAsyncResult based operations.
    - ChangeLog is built from git during the dist tarball
      generation.
  + API:
    - Defined additional GSM, UMTS and LTE frequency bands.
    - The MMModemBand enumeration values (EUTRAN, UTRAN and CDMA)
      have been renamed to consolidate how they are defined. A
      compatibility layer has been provided to avoid breaking the
      API.
    - New 'HardwareRevision' property in the Modem interface.
    - New 'EpsUeModeOperation' property and 'SetEpsUeModeOperation'
      method in the Modem 3GPP interface.
  + Core:
    - Updated libqcdm to load signal strength from QCDM EVDO Pilot
      Sets.
    - Updated udev rules with new per-vendor rules for quicker
      processing.
    - Explicitly ignored ports are never probed now, but they will
      be reported as owned by the device and exposed in the Ports
      property.
    - New 'ID_MM_TTY_BAUDRATE' udev tag to specify the baudrate to
      use in RS232 TTY ports.
    - If using UCS2, still assume that the operator name may be
      given in ASCII.
    - Explicitly open QCDM ports anytime it's needed, instead of
      assuming they are open when enabled.
    - Query supported ME event reporting options and automatically
      set the best choice based on the supported ones.
    - Query supported flow control modems and automatically set the
      best choice based on the supported ones.
    - Explicitly configure flow control settings on the TTY as soon
      as it is connected, only applicable for RS232 devices.
    - Implemented generic unlock retries loading.
  + MBIM:
    - Explicitly reprobe the modem when the mbim-proxy is detected
      dead.
    - Workaround implemented to keep track of the PIN1 unlock
      retries as the protocol isn't very good allowing this.
    - Load and expose HW revision.
  + QMI:
    - Explicitly reprobe the modem when the qmi-proxy is detected
      dead.
    - Load and expose HW revision.
    - Detect port closed and forbid client allocation operations.
    - New optional connection status monitoring support, enabled by
      default for the Netgear AC341U.
  + Location interface: Disabled by default for MBIM modems.
  + Messaging interface: Try decoding with UTF-16BE when UCS-2
    reported.
  + Plugins:
    - u-blox: new plugin, currently supporting the TOBY-L2,
      TOBY-L4, TOBY-R2, LARA-R2 and LISA-R2.
    - quectel: new plugin, supporting generic AT/QMI based modems.
    - cinterion: implemented support for devices exposing a WWAN
      network interface.
    - cinterion: support changing modes in LTE capable devices.
    - cinterion: added GPS support for devices controlled only with
      AT^SGPSC.
    - cinterion: use ^SIND unsolicited messages for access tech
      reporting.
    - huawei: implemented Signal interface.
    - telit: added support for RS232, QMI and MBIM modems.
    - novatel: cleaned up registration state and access tech
      reporting.
    - novatel-lte: implemented unlock retries loading.
    - dell: speed probing time up and reduce udev dependency.
    - mbm: added GPS support for the Dell DW5560.
  + Updated translations.
- Drop intltool BuildRequires, no longer needed.
- Pass --with-systemd-journal to configure, ensure we use the new
  journald support for logging.

-------------------------------------------------------------------
Mon Jul 30 21:21:42 UTC 2018 - bjorn.lie@gmail.com

- Update to version 1.6.14:
  + Build: Avoid -Wincompatible-pointer-types for MM 1.6.x builds,
    to skip the stricter checks in GObject.
  + Introspection:
    - Fixed bearer list annotations.
    - Explicitly use ModemManager prefix to refer to introspected
      types.
  + Core:
    - udev: add tags also on bind actions.
    - 3GPP: don't force auto registration if already registered.
    - Signal: fix reloading of detailed signal quality status on AT
      modems.
  + Plugins:
    - QMI: update EPS registration state for LTE modems.
    - MBIM:
      . Check if IP session is active before trying to deactivate
        it.
      . Increase deactivation timeout to 60s.
    - Huawei: Handle optional 0x prefix on hex numbers in ^DHCP
      response.
   + Several other minor fixes.

-------------------------------------------------------------------
Wed Feb 28 16:37:17 UTC 2018 - dimstar@opensuse.org

- Modernize spec-file by calling spec-cleaner

-------------------------------------------------------------------
Thu Jan 11 12:55:52 UTC 2018 - zaitor@opensuse.org

- Update to version 1.6.12:
  + Blacklist:
    - Ignored Pycom devices.
    - Added Microchip's VID to the greylist.
  + QMI:
    - Fixed connection state machine when built against libqmi <
      1.18.
    - Fixed connection state machine when an error is reported
      setting up WDS indications.
- Changes from version 1.6.10:
  + Blacklist:
    - Ignored Silicon Labs USB Zigbee dongles.
    - Ignored Garmin ANT+ sticks.
    - Ignored Intel coredump downloader device.
  + QMI:
    - Fixed potential user-after-free issues.
    - Fixed missing handler cleanups on network-initiated
      disconnects.
  + MBIM:
    - Fix invalid session_id and nw_error reads.
    - Avoid calling mbim_message_unref() on NULL message.
    - Fixed invalid object access due to handlers not being removed
      correctly.
    - Ensure session is disconnected before trying to connect.
    - Fixed t crash when modem doesn't send gateways.
  + udev:
    - Removed default ID_MM_PLATFORM_DRIVER_PROBE whitelist.
      Devices exposed via the 'atmel_usart' driver aren't probed
      automatically any more.
  + Core:
    - Fixed running init sequence after port flashing in
      disconnection.
    - Fixed "forbidden product strings" check in plugins.
    - Fixed multiple memory leaks and invalid memory read/writes.
    - Fixed multiple async operation completions in event handlers.
    - Fixed multiple potential NULL dereferences.
    - Fixed deadlock when trying to disconnect cancellable.
    - Fixed reporting TX/RX stats (numbers were swapped).
    - Ignored USB interface removal events.
  + libmm-glib: Fix NULL dereference on firmware unique_id checks.
  + polkit: Added missing Location interface method rules.
  + Plugins:
    - MBM: set data port for Dell DW5560.
    - Simtech: fix error reporting in 3gpp unsolicited events
      enabling.
    - Fixed multiple memory leaks.
  + systemd: Drop After=syslog.target rule.
- Drop post(un) handling of icon_theme_cache_post(un), no longer
  needed, file-triggers takes care of this now.
- Drop ModemManager-1.0.0-systemd-activation.patch: No longer
  needed.

-------------------------------------------------------------------
Thu Nov  9 01:53:44 UTC 2017 - sckang@suse.com

- Avoid using "systemctl enable" in spec file (bsc#1038402).

-------------------------------------------------------------------
Mon Jul 17 15:58:16 UTC 2017 - zaitor@opensuse.org

- Update to version 1.6.8:
  + Blacklist: Ignored default Linux USB Serial Gadget.
  + QMI:
    - Fixed build with libqmi 1.16.
    - Allow prefix match for modem images ending with '?'.
  + Plugins:
    - Telit: fix #PSNT values interpretation for HSDPA and LTE
      modems.
    - Telit: add LTE access technology reporting.
    - Huawei: let the E3372 run NDISDUP via TTY.
    - MBM: fix async method completion enabling unsolicited events.
  + Core:
    - AT+WS46=? response parser extended to support ranges.
    - Fix setting up signal quality retrieval logic.
- Changes from version 1.6.6:
  + Blacklist:
    - Ignored keyboard.io devices.
    - Ignored Analog Devices EVAL-ADXL362Z-DB.
    - Ignored promotion boards from Renesas.
    - Ignored Analog PlutoSDR.
    - Ignored Telit LE866 flashing device.
  + Plugins:
    - Telit: fix AT+SERVICE 3GPP2 access technology reporting.
    - Telit: lock/unlock CSIM operations by default.
    - Telit: don't ignore AT ports without an explicit port type
      hint tag.
    - Cinterion: improve ^SMONG and ^SCFG=? response parsers.
    - Huawei: implement Signal interface based on ^HCSQ.
    - QMI: require FCC auth if InvalidTransition error is detected.
    - QMI: fix incorrect use of mm_base_bearer_get_status().
    - QMI: add WDS event reporting support.
    - MBIM: remove parent access tech loading.
  + Core:
    - Added RSCP item in the Signal interface.
    - Implement Signal interface in the generic AT based modem
      based on ^CESQ.
    - Improve network registration checks for LTE devices.
    - Handle SDIO devices.
    - Fix QCDM access tech reporting for WCDMA system modes.
    - Fix capabilities in 4G-only devices.
    - Set TTY as connected as soon as ATD replies.
  + And some other fixes.

-------------------------------------------------------------------
Sun Feb 26 10:26:10 UTC 2017 - mailaender@opensuse.org

- Update to version 1.6.4:
  + Blacklist:
    - Ignored new Infineon flashloader devices.
    - Ignored Sigma Sport docking stations.
  + Core:
    - USSD: don't rely on lock status to allow actions.
    - 3GPP: always use 300s by default in the network scan
      operation.
    - Build: limit the available glib functionality to the version
      supported.
  + Plugins:
    - telit: add support for the Telit GE910.
    - zte: fix SUBSYSTEMS and ATTRS{idVendor} checks.
  + Other minor fixes.

-------------------------------------------------------------------
Mon Jan  2 12:06:17 UTC 2017 - mpluskal@suse.com

- Recommend libmbim (boo#1017734)

-------------------------------------------------------------------
Fri Dec  9 08:43:40 UTC 2016 - dimstar@opensuse.org

- Drop pkgconfig(libsystemd-login): Even though configure checks
  for it, pkgconfig(libsystemd) is actually enough to enable the
  needed features (resume support). libsystemd-login no longer
  exists with systemd v232.

-------------------------------------------------------------------
Tue Nov  1 13:24:34 UTC 2016 - zaitor@opensuse.org

- Drop obsolete automake BuildRequires: Leftover from past patches.

-------------------------------------------------------------------
Fri Oct 14 08:08:02 UTC 2016 - zaitor@opensuse.org

- Update to version 1.6.2:
  + Huawei: Fix setting up unsolicited voice messages.
  + Blacklist: ignored u-blox GPS/GLOSNASS USB dongle and some new
    Arduinos.
  + ZTE: avoid making udev rules tty-only.
  + Some other minor fixes.
- Drop ModemManager-core-use-MM-specific-logging-methods.patch:
  Fixed upstream.

-------------------------------------------------------------------
Thu Oct 13 18:18:57 UTC 2016 - hpj@urpla.net

- Add explicit pkgconfig(libsystemd) and
  pkgconfig(libsystemd-login) BuildRequires: Align with what
  configure looks for. These are needed for the new suspend/resume
  detection that arrived in 1.6.0.

-------------------------------------------------------------------
Fri Aug 26 07:10:44 UTC 2016 - sckang@suse.com

- Drop
  bnc878066-serial-ports-on-the-IO-card-are-not-responding.patch:
  No longer needed.

-------------------------------------------------------------------
Thu Aug 18 14:55:57 UTC 2016 - zaitor@opensuse.org

- Add ModemManager-core-use-MM-specific-logging-methods.patch:core:
  use MM-specific logging methods always instead of the generic
  GLib ones. Patch from upstream stable git.

-------------------------------------------------------------------
Mon Aug 15 09:29:09 UTC 2016 - bruno@ioda-net.ch

- Update to version 1.6.0 (boo#975211):
  + New features:
    - Core:
      . Implemented support for suspend/resume detection, currently
        working when systemd is in use. Whenever the system is
        suspended, we'll flag the modems as invalid so that they
        are re-probed from scratch when the system is resumed.
      . Added cancellation support for the probing operations.
      . Reworked and simplified the serial port response
        processing.
    - Location interface:
      . Added A-GPS support, currently available only for QMI based
        modems with PDS service.
      . Added support for updating the default GPS refresh time.
    - Time interface: New default implementation for all AT-based
      modems.
    - Voice interface: New DBus interface to allow the management
      of voice calls, which currently assumes that the audio
      channel is setup out of ModemManager.
    - Bearer: New support for reporting statistics of the ongoing
      connection with a new 'Stats' property, currently available
      for QMI and MBIM based modems.
    - QMI:
      . Implemented support for devices which only work in "raw IP"
        mode, like the Sierra MC7455.
      . Implemented support for SIM related operations using the
        UIM service, as newer modems with multi-SIM capabilities
        don't support the legacy DMS UIM operations.
      . Implemented support for detecting network-initiated
        disconnections.
    - MBIM: If online mode fails, try to use the 'DMS Set FCC
      Authentication' QMI
    - udev: Added new supported 'ID_MM_PORT_IGNORE' tag to allow
      fully ignoring ports specified by the user.
    - mmcli:
      . Added command completion.
      . Added new operations to use the Voice interface.
    - Build: Added code coverage support.
    - Plugins:
      . haier: new plugin to support the Haier CE81B.
      . thuraya: new plugin for Thuraya satellite modems.
      . sierra-legacy,sierra: the implementation for Sierra modems
        is now split into two different plugins: a 'legacy' one for
        the old PPP and DirectIP based modems and the standard one
        for the newer QMI and MBIM based ones.
      . dell: new plugin for Dell rebranded devices from Novatel, 
        Sierra or Ericsson.
      . gobi: removed the plugin. All non-vendor specific QMI
        devices should now be managed by the generic plugin.
      . mbm: dynamically load the list of supported modes.
      . mbm: fixed several connection/disconnection issues.
      . simtech: support QMI devices.
      . huawei: implemented Voice call management support.
      . huawei: use static IP addressing in NDISDUP capable devices 
        if the AT^DHCP response provides the IP details.
  + Existing features backported to 1.4.x releases also present in 
    in ModemManager 1.6.0:
    - MBIM:
      . The mbim-proxy is used by default.
      . Implemented support for disconnection status notification 
        while connected.
      . Disabled CDMA capabilities, until properly supported.
    - QMI:
      . The qmi-proxy is used by default.
      . If online mode fails, use 'DMS Set FCC Authentication', 
        required by some rebranded Sierra modems (e.g. Dell branded 
        ones).
      . Implemented support for loading SIM operator id and name.
      . Implemented power-cycle reset functionality.
    - Plugins:
      . telit:
        . added support for new devices, like HE910, UE910 and 
        . implemented dynamic port identification.
        . implemented unlock retries loading.
        . implemented supported/current bands management.
        . implemented supported/current modes management.
        . implemented modem reset and power down.
      . mbm: implemented GPS support for Ericsson HS2350 and 
        H5321gw modems.
- Drop upstream fixed patches:
  + ModemManager-cinterion_drop_unused_constants.patch.
  + ModemManager-novatel_remove_unused_custom_AT_probe_array.patch.
  + ModemManager-wmc_fix_typo.patch.
  + ModemManager-fix-whitespaces.patch.
- Added nmcli-bash-completion package.
- Need last version of polkit-default-priv (bsc#976945).
- build '--with-suspend-resume=systemd' argument.

-------------------------------------------------------------------
Mon May 23 14:58:36 UTC 2016 - dimstar@opensuse.org

- Add three more patches from upstream to fix build with gcc6:
  + ModemManager-cinterion_drop_unused_constants.patch.
  + ModemManager-novatel_remove_unused_custom_AT_probe_array.patch.
  + ModemManager-wmc_fix_typo.patch.

-------------------------------------------------------------------
Mon May 23 13:42:39 UTC 2016 - dimstar@opensuse.org

- Add ModemManager-fix-whitespaces.patch: Fix whitespace usage.
  While building with GCC 6, the indenting is taken as a warning
  for the user likely making a mistake.

-------------------------------------------------------------------
Thu Apr 14 16:17:29 UTC 2016 - mgorse@suse.com

- Update to GNOME 3.20  Fate#318572
- Rebased
  bnc878066-serial-ports-on-the-IO-card-are-not-responding.patch.

-------------------------------------------------------------------
Mon Apr 11 12:04:20 UTC 2016 - dimstar@opensuse.org

- Update to version 1.4.14:
  + Core:
    - Improved several AT response parsers (+CREG, +CGDCONT,
      +CPMS...).
    - Explicitly disconnect bearer before removing it.
  + 3GPP: allow LAC/CID updates while registering.
  + QMI:
    - Don't assume LAC/CID updates are always given in system
      indications.
    - Don't add APN auth settings if user/pass not given.
    - Load SIM operator id and name with "NAS home network"
    - Power-cycle reset functionality implemented.
  + Telit:
    - Added udev rules for Telite LE910 V2.
    - Implemented modem reset & power down.
    - Implemented unlock retries loading.
    - Implemented supported/current bands loading/setting.
    - Implemented supported/current modes loading/setting.
    - Ignored proxmark3.
  + Some other minor fixes.

-------------------------------------------------------------------
Mon Nov  2 09:16:42 UTC 2015 - zaitor@opensuse.org

- Update to version 1.4.12:
  + MBM:
    - Implemented GPS support for Ericsson modems.
    - Enabled GPS port for H5321gw and HS2350.
   + Telit:
     - Added udev rules for HE910/UE910/UL865.
     - Implemented dynamic port identification.
   + QMI:
     - Expose IP config details in bearer object even if DHCP is
       requested.
     - Retrieve MM_MODEM_3GPP_FACILITY_SIM.
   + MBIM: CDMA capabilities disabled by default (not yet
     supported).
   + libmm-glib:
     - If empty path (/) given, no SIM object will be created.
     - Added missing introspection annotations to disconnect().
   + Core:
     - Don't check the cache when explicitly asking for required
       unlocks.
     - Initialize SMS messaging support also in the secondary port.
     - New +CGMR parser which covers the Telit HE910 specific
       format.
     - New AT-based generic implementation for the Time interface.
     - Fix reporting DENIED state in 3GPP modems.
   + Policy: remove rule which was preventing us from receiving
     signals.
   + Blacklist: ignored MediaTek preloader.
   + Misc. other minor fixes

-------------------------------------------------------------------
Thu Aug  6 08:26:47 UTC 2015 - dimstar@opensuse.org

- Add explicit pkgconfig(udev) BuildRequires: we need it to define
  %{_udevdir}.

-------------------------------------------------------------------
Fri Jul 24 11:13:11 UTC 2015 - jweberhofer@weberhofer.at

- Update to version 1.4.10:
  + QMI: retry unlock check on 'UimUninitialized' errors.
  + QMI: fix '0' prefixed IMEI/ESN/MEID.
  + Huawei: fix secondary port unsolicited message handling.
  + Huawei: ignore ^POSEND and ^POSITION unsolicited messages.
  + Blacklist: ignore devices from Posnet Polska S.A.
  + Blacklist: ignore Palm M5xx devices.

- Cleaned up spec

-------------------------------------------------------------------
Thu Apr 23 12:26:45 UTC 2015 - zaitor@opensuse.org

- Update to version 1.4.8:
  + Build: avoid building DBus tests with GLib 2.32.
  + ZTE: support MF700.
  + Huawei: extend ^NDISSTATQRY parser with new response formats.
  + Blacklist: ignore devices from Access Interface Solutions.
  + Core: added ModemManager --version action.
  + Some other minor fixes.
- Changes from version 1.4.6:
  + MBIM: by default use the new mbim-proxy setup.
  + Telit: new support for HE910, UE910 and UL865.
  + Location: avoid printing location info in syslog with info
    level.
  + Greylist: add Cypress USB<->RS232 adapters
  + QMI: avoid unref-ing arrays owned by the output bundles.
  + Some other minor fixes.
- Changes from version 1.4.4:
  + Use 'DMS Set FCC Authentication' if online mode fails in QMI
    modems. This change requires bumping the libqmi version to
    1.12.4, which is the stable release including the change.
  + Fix segfault when empty pdp type string is given.
  + Fix segfault when port driver is unknown.
  + Blacklist: ignore PalmOS devices driven by 'visor'

-------------------------------------------------------------------
Mon Feb  9 15:19:59 UTC 2015 - zaitor@opensuse.org

- Update to version 1.4.2:
  + MBIM:
    - Update to handle 'Function Error' responses as per libmbim
      1.12.
    - Handle network-notified connection status messages.
  + Bluetooth: Keep track of devices as they are move across sysfs.
  + Core: case insensitive matches in the APN list.
  + ZTE: avoid using QMI in the MF60.
  + Huawei: updated port type hint strings.
  + Icera:
    - Fix no IPv6 report response.
    - Retry Icera probing several times.
  + Altair: increase AT probe command timeout.
  + Some other minor fixes.

-------------------------------------------------------------------
Mon Oct 20 11:57:19 UTC 2014 - dimstar@opensuse.org

- Update to version 1.4.0:
  + This version comes with the following updates in the
    interfaces:
    - Updated the logic around the IP configuration properties in
      the Bearer:
      . Setting DHCP as IP method in the IPv6 settings means that
        SLAAC should be used to retrieve correct addressing and
        routing details.
      . DHCP IP method may now be combined with an explicit static
        IP address, as IPv6 SLAAC may require the link-local
        address to be present.
      . MTU is now also included in the IP configuration
        properties, if specified by the modem, and applicable to
        both DHCP and STATIC methods.
    - New 'OFF' power state, which fully switches off the modem
      device. After setting the modem in this state, no further use
      of it can be done. Currently available in Wavecom and
      Cinterion.
    - Location interface: new 'unmanaged GPS' support, which allows
      to start/stop the GPS module in the modem, while leaving the
      location information retrieval to other processes. Currently
      available in modems with independent GPS TTYs, like
      Option/HSO, Cinterion and Huawei.
    - New Test DBus interface: not to be installed, just for
      internal system tests.
  + Other notable changes include:
    - MBIM: support for ZTE and Sequans Communications modems.
    - Ericsson MBM: Support for AT-capable /dev/cdc-wdm ports.
    - Huawei: improved support for Network time retrieval.
    - Huawei: implemented GPS support.
    - Huawei: support for /dev/cdc-wdm AT ports via the new
      huawei-cdc-ncm driver.
    - Cinterion: implemented GPS support.
    - Cinterion: implemented unlock retries loading.
    - Cinterion: gather port types for multi-tty devices.
    - Cinterion: custom wait for SIM readiness after SIM-PIN
      unlock.
    - Wavecom: custom wait for SIM readiness after SIM-PIN unlock.
    - Probing: new flag to identify hotplugged devices which don't
      need full reset.
    - Tests: internal refactor of the ports handling code, allowing
      test-driven virtual ports and system tests run during
      'make check'. This new feature also comes with a new internal
      'Test' DBus interface, as well as new --test-[*] options in
      the ModemManager program.
    - and many more fixes...
- Changes from version 1.2.0:
  + Signal interface: new interface for extended signal quality
    information.
  + OMA interface: new interface to expose the Device Management
    capabilities defined by the Open Mobile Alliance.
  + Messaging interface: new 'Messages' property.
  + Modem interface: new 'Bearers' property.
  + 3GPP interface: new 'SubscriptionState' property.
  + Other notable changes include:
    - QMI: Implemented Manual CDMA activation logic.
    - QMI: Implemented 3GPP2/CDMA SMS support.
    - QMI: Added support for QMI modems in the ZTE, x22x and
      Cinterion plugins.
    - Huawei: multiple improvements and fixes for the ^NDISDUP
      support.
    - Huawei: new mode/switching logic with ^SYSCFGEX for
      LTE-capable devices.
    - Altair-LTE: set subscription state based on PCO.
    - MediaTek: new 'mtk' plugin added for MediaTek devices.
    - libmm-glib: Added GObject Introspection and Vala support.
    - and many more fixes...
- Add gobject-introspection-devel and vala BuildRequires: new build
  dependencies.
- Split new subpackage typelib-1_0-ModemManager-1_0.
- Add rcModemManager symlink.

-------------------------------------------------------------------
Wed Aug 20 08:29:18 UTC 2014 - lnussel@suse.de

- Add ModemManager-1.0.0-systemd-activation.patch: Fix systemd dbus
  activation (bnc#892682). Systemd does not honor Alias= lines in
  install sections; that only works if the service file in question
  is actually enabled. So the dbus service file must refer to
  ModemManager.service.

-------------------------------------------------------------------
Wed Jul 23 03:34:04 UTC 2014 - rlmu@suse.com

- Added bnc878066-serial-ports-on-the-IO-card-are-not-responding.patch
  Fixed bnc#878066:
  4810-350 (Jaspar) and 4800-783 (Keystone Hi) serial ports on the IO card are not responding

-------------------------------------------------------------------
Wed Jan 22 11:59:13 UTC 2014 - dimstar@opensuse.org

- As we enabled pkgconfig(qmi-glib) and pkgconfig(mbim-glib)
  BuildRequires (last change), it's arguably also a good idea to
  replace --without-qmi and --without-mbim configure parameters
  with their --with-qmi and --with-mbim counterparts (and thus
  actually really enable the support).

-------------------------------------------------------------------
Sun Dec  1 17:04:45 UTC 2013 - dimstar@opensuse.org

- Enable pkgconfig(qmi-glib) and pkgconfig(mbim-glib)
  BuildRequires, as we now have a package for it.

-------------------------------------------------------------------
Sat Nov 30 20:09:44 UTC 2013 - crrodriguez@opensuse.org

- Run %udev_rules_update if such macro is defined.

-------------------------------------------------------------------
Tue Sep 10 12:26:41 UTC 2013 - dimstar@opensuse.org

- Enable the ModemManager service. In essence, it's a D-Bus
  service so enabling it in systemd only means to make it known
  and activatable (bnc#839067).

-------------------------------------------------------------------
Fri Jul 19 14:46:25 UTC 2013 - zaitor@opensuse.org

- Update to version 1.0.0:
  + More flexible D-Bus API that accounts for the capabilities of
    modern devices.
  + Native support for Gobi and QMI-based Qualcomm devices via
    libqmi.
  + Native support for MBIM-based devices via libmbim.
  + Preliminary support for GPS-based Location Services with some
    devices.
  + More complete messaging API.
  + New libmm-glib client library.
  + New fully-featured command-line client (mmcli).
  + Systemd integration.
  + And various other changes.
- Add pkgconfig(mbim-glib) BuildRequires: new dependency (disabled
  for now).
- Stop passing --with-pppd-plugin-dir=$pppddir to configure, not
  reqcognized anymore.
- Add pkgconfig(systemd) BuildRequires, new dependency.
- Add systemd ModemManger.service to pre, preun, post and postun.

-------------------------------------------------------------------
Fri Jun 21 13:31:36 UTC 2013 - dimstar@opensuse.org

- Update to version 0.7.991:
  + Bug fixes and improvements on the road to 0.8.0.

-------------------------------------------------------------------
Thu Jun  6 10:27:50 UTC 2013 - denicolo@suse.com

- License update: GPL-2.0+ and GPL-3.0
  Correct license is GPL-2.0+; see COPYING file.
  The cli tool is licensed GPL-3.0+.

-------------------------------------------------------------------
Tue Apr 16 05:47:45 UTC 2013 - dimstar@opensuse.org

- Drop rpmlintrc: the privileges are approved in Factory.

-------------------------------------------------------------------
Sat Jan 12 22:02:09 UTC 2013 - dimstar@opensuse.org

- Update to version 0.7.990:
  + More flexible D-Bus API that accounts for the capabilities of
    modern devices.
  + Native support for Gobi and QMI-based Qualcomm devices via
    libqmi.
  + Preliminary support for GPS-based Location Services with some
    devices.
  + More complete messaging API.
  + Fully-featured command-line client (mmcli).
- Add pkgconfig(qmi-glib) BuildRequires: new dependency.
- Create new subpackage libnm-glib0.

-------------------------------------------------------------------
Tue Nov 27 18:01:14 UTC 2012 - dimstar@opensuse.org

- Move udev rules file to the folder specified by udev.pc by
  passing --with-udev-base-dir to configure.

-------------------------------------------------------------------
Wed Aug 29 18:46:35 UTC 2012 - dimstar@opensuse.org

- Update to version 0.6.0.0:
  + Minor bugfixes.

-------------------------------------------------------------------
Mon Aug 20 18:50:13 UTC 2012 - dimstar@opensuse.org

- Update to version 0.5.995.0:
  + More flexible and reliable port probing and modem setup.
  + New plugin for some Cinterion modems.
  + New plugin for some Iridium satellite modems.
  + New API for modem firmware management.
  + New API for network-provided date and time.
  + New API for indicating remaining PIN/PUK unlock retries.
  + New API for indicating enabled facility locks.
  + Plugins can now suggest and IP timeout value for connection
    managers.
- Drop ModemManager-unsupported-qmi_wwan-ports.patch: fixed
  upstream.

-------------------------------------------------------------------
Mon Aug 20 10:08:13 UTC 2012 - vuntz@opensuse.org

- Add ModemManager-unsupported-qmi_wwan-ports.patch: fix calls to
  pppd when using the qmi_wwan. Fix bnc#776520.

-------------------------------------------------------------------
Wed Mar 14 17:13:02 UTC 2012 - vuntz@opensuse.org

- Update to version 0.5.2.0:
  + Retry sending SMS messages in PDU mode if an error occurs in
    text mode

-------------------------------------------------------------------
Sun Feb 26 14:10:33 UTC 2012 - vuntz@opensuse.org

- Update to version 0.5.1.97:
  + Fix reading SMS messages in text mode
  + Fix communication with some Nokia phones
- Drop ModemManager-use-deprecated.patch: fixed upstream.
- Remove libtool BuildRequires and call to autoreconf: those were
  only needed for patch above.
- Remove xz BuildRequires now that it comes for free in the build
  system.

-------------------------------------------------------------------
Wed Feb 15 11:51:04 UTC 2012 - vuntz@opensuse.org

- Move dbus xml interface files from devel subpackage to main
  subpackage: those files might be needed at runtime.

-------------------------------------------------------------------
Wed Feb  8 19:52:24 UTC 2012 - dimstar@opensuse.org

- Add ModemManager-use-deprecated.patch: do not warn about using
  deprecated methods. This allows to build against glib >= 2.31.14.
- Add call to autoreconf in %%prep section, as the patch above
  touches m4 files.

-------------------------------------------------------------------
Thu Jan 19 06:36:55 UTC 2012 - vuntz@opensuse.org

- Update to version 0.5.1.96:
  + Fixed sending SMS messages with modems that only support PDU
    mode

-------------------------------------------------------------------
Tue Jan 10 07:04:21 UTC 2012 - vuntz@opensuse.org

- Update to version 0.5.1.95:
  + Better detection of registration state when connecting
  + Added support for more Ericsson modems
  + Many memory leak fixes
  + Ensure Gobi devices are driven by the gobi plugin
  + Added multi-part SMS message support
  + Better handling of requests when modem is disabled
  + USSD fixes for Huawei devices
  + Added support for Nokia Internet Sticks
  + Fixed quirky response handling on some Cinterion modems
  + Fixed CREG response handling on modems that include the RAC
  + Skip sending power-up command if modem is already powered up
  + Added support for Sierra Wireless devices using Icera chips
    (USB305, Lightning)
- Add xz BuildRequires because we can't build a package for a
  xz-compressed tarball without explicitly specifying that... See
  bnc#697467 for more details.
- Drop ModemManager-glib-2.31.patch: fixed upstream.

-------------------------------------------------------------------
Wed Nov 16 13:44:45 UTC 2011 - vuntz@opensuse.org

- Add ModemManager-glib-2.31.patch: fix build with glib 2.31.

-------------------------------------------------------------------
Tue Nov 15 14:15:25 UTC 2011 - dimstar@opensuse.org

- Really enable parallel build: fix typo smp_flags => smp_mflags.

-------------------------------------------------------------------
Sat Sep 17 09:43:38 UTC 2011 - jengelh@medozas.de

- Remove redundant tags/sections from specfile

-------------------------------------------------------------------
Wed Aug  3 08:03:49 CEST 2011 - vuntz@opensuse.org

- Update to version 0.5:
  + Improvements for Samsung modems
  + Support access technology reporting for Qualcomm Gobi modems
  + Fix communication with Nokia N900 devices
  + Support multiple CDMA Rm protocols
  + Fix handling of Option access technology reporting
  + Fix handling of CDMA EVDO registration states
  + Fix problems reconnecting Ericsson F5521gw modems
  + Better handling of some Android handset modem
  + Bugs fixed: rh#583691, lp#765516, bgo#641661, bgo#652682,
    bgo#650740, bgo#652910, bgo#637327.

-------------------------------------------------------------------
Fri Jul  1 09:46:46 CEST 2011 - vuntz@opensuse.org

- Update to version 0.4.998:
  + Handle udev 'change' events.
  + gsm:
    - set SMS storage location before enabling notifications
    - handle case of entirely empty SPN correctly
  + ussd: fix reception, network notifications, and network
    requests
  + serial: warn when open/close take longer than 7 seconds
  + Add a DBus interface for setting the log level.
  + Add support for Samsung Y3400.
  + Improvements for Icera-based modems.
  + Improve disabling of Samsung GSM modems.
  + Fix leaks.

-------------------------------------------------------------------
Wed Jun 15 12:49:34 CEST 2011 - dimstar@opensuse.org

- Update to version 0.4.997:
  + Add support for various Linktop devices (LW273, etc)
  + Implement standard D-Bus Properties interface PropertiesChanged
    signal
  + Add support for Qualcomm SMD-connected modems
  + Export modem state over D-Bus
  + Add D-Bus API for CDMA modem activation
  + Correctly report HSPA+ access technology
  + Correctly report home vs. roaming state with basic Sprint CDMA
    modems
  + Add D-Bus API for power-cycling/resetting modems
  + Add support for USSD responses
  + Finer grained and more consistent logging
  + Blacklist more usb-serial dongles unlikely to be modems
  + Add support for platform serial ports
  + Loosen permissions for reading device information
  + Add support for Samsung Y3300 Icera-based modem
  + Speed up probing process when ports support AT commands
  + Better SMS reception and reporting
  + Add support for some Wavecom modems
  + Add support for Simtech-based Prolink PH-300
  + Add support for Alcatel X200
  + Fix various crashes when modem is removed
  + Bigs fixed: bgo#636040, bgo#636438, bgo#637140, bgo#638038,
    bnc#674022, kde#266807, lp#673457, rh#544121.

-------------------------------------------------------------------
Thu May  5 10:42:27 CEST 2011 - vuntz@opensuse.org

- Update to version 0.4.996:
  - Add a mechanism to get remaining incorrect PIN attempts
  - Add a mechanism to retrieve the equipment identifier
    (MEID/ESN, IMEI)
  - Added support for returning devices to factory settings
  - Better compatibility with Blackberry GSM devices
  - Added a Location Services API with support for GSM devices
  - Fixes for Novatel CDMA devices (home/roaming status, better
    signal quality reporting)
  - Better detection of EVDO registration when device is in 1X mode
  - Add support for newer Alcatel devices like X220D
  - Support for more ZTE devices
  - Fix modem detection failures with some Sierra devices
  - Add support for newer Ericsson devices
  - Add an SIM identifier for use when auto-unlocking modems
  - Add an device identifier for use when MEID/IMEI is not yet
    available
  - Handle signal quality reporting for GSM modems that don't
    support AT+CSQ
  - Add preliminary USSD support
  - Fix reconnection attempts with some Sierra devices
  - Add support for pseudo-ethernet interface on newer Sierra
    devices
  + Fixed bugs: rh#597296, rh#583691, rh#597088, bgo#626421,
    rh#585394, bgo#628105, bgo#627935, bgo#621815, rh#632516,
    lp#682282, bgo#590798
- Drop ModemManager-fix-new-glib.patch: fixed upstream.
- Drop ModemManager-polkit-deprecated.patch: fixed upstream.
- Create a devel subpackage for new development files.

-------------------------------------------------------------------
Sun Feb 13 16:52:28 CET 2011 - vuntz@opensuse.org

- Call relevant macros in %post/%postun:
  + %icon_theme_cache_post/postun because the package ships themed
    icons.
- Add hicolor-icon-theme BuildRequires and Requires since we need
  to have those macros defined and we install hicolor icons, so we
  need to have the theme installed.

-------------------------------------------------------------------
Wed Nov 10 12:39:23 UTC 2010 - coolo@novell.com

- Remove zero-size files from documentation.

-------------------------------------------------------------------
Wed Nov 10 12:36:31 UTC 2010 - coolo@novell.com

- Own parent directories.

-------------------------------------------------------------------
Fri Aug 27 12:13:02 CEST 2010 - vuntz@opensuse.org

- Add ModemManager-polkit-deprecated.patch to fix build with a
  recent polkit (>= 0.97). This is only needed on openSUSE 11.4 and
  later.

-------------------------------------------------------------------
Mon Aug  9 12:46:41 CEST 2010 - vuntz@opensuse.org

- Add ModemManager-fix-new-glib.patch to fix build with recent
  glib.
- Build PolicyKit support: add polkit-devel BuildRequires and pass
  --with-polkit to configure.
- Do not add -fno-strict-aliasing to CFLAGS: this is not needed
  anymore.

-------------------------------------------------------------------
Mon Jul 26 11:56:15 UTC 2010 - dimstar@opensuse.org

- Update to version 0.4:
  + For the full list of changes, see
    http://cgit.freedesktop.org/ModemManager/ModemManager/log/?id=0.4
  + bgo#604551: add an unlockRequired property that provides lock
                status, check modem PIN state before exporting it
  + bgo#608668: tag ChineBird PL68 ports
  + bgo#591047: only set auto registration if the modem isn't idle
  + bgo#608022: allow blacklisting various devices
  + bgo#617873: gsm: be more lenient in +CGDCONT parsing
  + rh#553199: ignore CSS on EVD0-capable modems.
  + rh#573510: assume +CPIN "READY" response indicates GSM
               capability
  + rh#579247: fix sypport check for last plugin
  + rh#569067: cdma: fix subclass registration state checking in
               error paths
  + rh#571921: cdma: prevent crash on modem removal
  + rh#587400: gsm/cdma: fix data port assignment
  + Updated translations.

-------------------------------------------------------------------
Wed May 26 11:38:20 CEST 2010 - vuntz@opensuse.org

- Remove hal-devel BuildRequires again.
- Remove ozerocdoff Recommends: usb_modeswitch is the modern
  solution, and it's already recommended. And ozerocdoff depends on
  hal, which is bad.

-------------------------------------------------------------------
Thu Jan 21 18:05:51 UTC 2010 - tambet@novell.com

- Upgrade to version 0.3. No new features, but includes a lot of
  bug fixes and much broader hardware support.

-------------------------------------------------------------------
Thu Dec 10 20:43:23 UTC 2009 - aj@suse.de

- Remove unused BuildRequires hal-devel
- Add build require on udev for directory ownership.

-------------------------------------------------------------------
Tue Aug 11 11:46:42 UTC 2009 - tittiatcoke@gmail.com

- Update to the latest upstream:
  + Move device probing and detection to udev
  + Add plugin for Motorola C-series phones and BUSlink scwi275u
  + Add plugin for Qualcomm Gobi devices
  + Updated Ericsson 'mbm' driver
  + Better Huawei detection; don't drop BUSlink responses
  + Several other fixes

-------------------------------------------------------------------
Tue Jun 16 10:43:16 EEST 2009 - tambet@novell.com

- Update to the latest upstream:
  + Some fixes to the public API to correctly implement the spec.
  + Implement unsolicited registration for modems that support it.
  + Implement new "Simple" interface.
  + Implement cached commands.
  + Implement 'V1 E1' parser to work with modems which refuse to
    turn their echo off.
  + Implement Nokia plugin.
  + Implement a plugin for ZTE modems.
  + Lots of minor bug fixes.

-------------------------------------------------------------------
Thu Feb 26 11:42:41 EET 2009 - tambet@novell.com

- Probe HSO modems, don't trust (often incorrect) HAL modem
  properties (bnc #468329).

-------------------------------------------------------------------
Fri Feb  6 09:19:14 EET 2009 - tambet@novell.com

- Fix dbus permissions (bnc #468384).

-------------------------------------------------------------------
Mon Jan 26 15:24:20 EET 2009 - tambet@novell.com

- Implement Novatel plugin (bnc #468323).

-------------------------------------------------------------------
Fri Jan 16 10:15:43 EET 2009 - tambet@novell.com

- Check the registration state even after unsuccessful attempt,
  some cards report error if they're already registered before
  the attempt (bnc #430673).

-------------------------------------------------------------------
Tue Jan  6 12:35:58 EET 2009 - tambet@novell.com

- Broaden the network device matching for HSO modems as some
  (newer?) modems have only matching grandparent between serial
  and ethernet device UDIs. Fix the Option driver to not steal
  HSO modems. (bnc #462534).
- Explicitly disable unsolicitied messages for generic GSM modems
  (bnc #462536).
- Not all serial devices have carrier detection. Add a property to
  the serial base class to turn it off and make certain Huawei
  modems turn it off (bnc #462567).
- Suggest "ozerocdoff" (part of bnc #405178).

-------------------------------------------------------------------
Wed Dec  3 11:07:27 EET 2008 - tambet@novell.com

- Fix the HSO modem plugin (bnc #449992).
- Provide 'org.freedesktop.ModemManager' so that NetworkManager
  could use alternative implementations.

-------------------------------------------------------------------
Mon Nov 24 17:07:35 EET 2008 - tambet@suse.de

- Always log which modem plugin is used.

-------------------------------------------------------------------
Tue Nov 18 13:09:18 EET 2008 - tambet@suse.de

- Don't require CDMA modems to implement verbose error reporting
  (+CMEE command) (bnc #430502).
- Add a Sierra Wireless plugin that waits a bit after enabling the
  radio (bnc #430673).

-------------------------------------------------------------------
Fri Nov  7 15:44:06 EET 2008 - tambet@suse.de

- Implement a plugin for Option devices.
- Enable/disable plugging with SIGUSR1.
- Recommend usb_modeswitch (bnc #442515).

-------------------------------------------------------------------
Fri Oct 24 12:39:05 EEST 2008 - tambet@suse.de

- Add support for MBM modems.
- Use only one serial port for Huawei modems.

-------------------------------------------------------------------
Mon Oct 20 14:41:26 EEST 2008 - tambet@suse.de

- Fix a segfault which occured when scanning results could not be
  parsed.
- Register a correct response parser for generic CDMA
  implementation.

-------------------------------------------------------------------
Fri Sep 19 13:56:21 EEST 2008 - tambet@suse.de

- Make it build for openSUSE 11.0 as well.
- Update from upstream:
  + Implement smarter APN choosing.
  + Implement PIN changing and enabling/disabling.
  + Make sure the device is enabled before trying to send commands to it.
  + Disconnect modem if it's connected while disabling.
  + Fix the loadable module name checking.
  + Document DBus error codes and messages.
  + Get the monitoring device from HAL for Huawei modems.
  + Add correct message to mobile (+CMEE) errors.
  + Finish the non-verbose (V0) mode parser.
  + Reduce the amount of power used to minimum when modem is disabled.
  + Reset the CID when the modem is enabled/disabled and disconnected.
  + Specify call mode in the modem init string.

-------------------------------------------------------------------
Fri Sep 12 15:50:16 EEST 2008 - tambet@suse.de

- Remove the patch to not require dbus-glib-0.75, factory has it.
- Update from upstream:
  + Rewrite the serial port handling.
  + Implement serial command queueing.
  + Define and implement error reporting.
  + Fix device added and removed signals.

-------------------------------------------------------------------
Sun Sep  7 11:45:30 CEST 2008 - schwab@suse.de

- Use autoreconf -fi.

-------------------------------------------------------------------
Mon Sep  1 18:10:24 CEST 2008 - tambet@suse.de

- Update from upstream:
  + Fix upper case inconsistency in the public API (SetApn).
  + Fix HSO modem plugin.
  + Implement reading IMEI, IMSI, manufacturer, model, and version (revision).
  + License ModemManager with GNU Lesser General Public License, version 2.1.

-------------------------------------------------------------------
Fri Aug 29 15:18:08 CEST 2008 - tambet@suse.de

- Update from upstream to get the API redesign agreed on NetworkManager
  mailing list.

-------------------------------------------------------------------
Thu Aug 28 16:40:00 EEST 2008 - tambet@suse.de

- Initial checkin for autobuild.

Places

File ModemManager.changes of Package ModemManager (Revision fde9f4a1a2c22f638360b2faf3793315)

Places