openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File mdadmd of Package mdadm (Revision 20abf164f4cd26b2a8322ed6c565d2c2)

Currently displaying revision 20abf164f4cd26b2a8322ed6c565d2c2 , Show latest

#! /bin/sh
# Copyright (c) 1995-2002 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Petr Ostadal, feedback to http://www.suse.de/feedback
#
# /etc/init.d/mdadmd
#
#   and its symbolic link
#
# /usr/sbin/rcmdadmd
#
### BEGIN INIT INFO
# Provides:          mdadmd
# Required-Start:    $local_fs
# Should-Start:  $time sendmail
# Required-Stop:     $local_fs
# Should-Stop: $time sendmail
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Short-Description: mdadmd daemon monitoring MD devices
# Description:       Start mdadmd to allow monitoring MD devices aka
#	Linux Software Raid. This is only meaningful for raid1, raid5
#	or  multipath arrays as only these have interesting state.
#	raid0 or linear never have missing, spare, or failed drives, 
#	so there is nothing to monitor.
### END INIT INFO

mdadmd_BIN=/sbin/mdadm
test -x $mdadmd_BIN || exit 5

mdadmd_CONFIG=/etc/sysconfig/mdadm
test -r $mdadmd_CONFIG || exit 6
. $mdadmd_CONFIG

if [ x$MDADM_DELAY = x"" ]; then
  MDADM_DELAY=60
fi
MDADM_DELAY="-d "$MDADM_DELAY;

if [ x$MDADM_MAIL != x"" ]; then
  MDADM_MAIL="-m \"$MDADM_MAIL\""
fi
 
if [ x$MDADM_PROGRAM != x"" ]; then
  MDADM_PROGRAM="-p \"$MDADM_PROGRAM\""
fi

if [ x$MDADM_SCAN = x"yes" ]; then
  MDADM_SCAN="-s"
else
  MDADM_SCAN=""
fi

if [ x$MDADM_SEND_MAIL_ON_START = x"yes" ]; then
  MDADM_SEND_MAIL="-t"
else
  MDADM_SEND_MAIL=""
fi

if [ x$MDADM_CONFIG != x"" ]; then
  MDADM_CONFIG="-c \"$MDADM_CONFIG\""
fi

. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0	  - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

case "$1" in
    start)
	echo -n "Starting mdadmd "
	## Start daemon with startproc(8). If this fails
	## the return value is set appropriately by startproc.
	eval startproc -q -s $mdadmd_BIN -F $MDADM_RAIDDEVICES $MDADM_DELAY $MDADM_MAIL $MDADM_PROGRAM $MDADM_SCAN $MDADM_SEND_MAIL $MDADM_CONFIG

# Remember status and be verbose
	rc_status -v
	;;
    stop)
	echo -n "Shutting down mdadmd "
	## Stop daemon with killproc(8) and if this fails
	## killproc sets the return value according to LSB.

killproc -TERM $mdadmd_BIN

# Remember status and be verbose
	rc_status -v
	;;
    try-restart)
	## Do a restart only if the service was active before.
	## Note: try-restart is not (yet) part of LSB (as of 1.2)
	$0 status >/dev/null &&  $0 restart

# Remember status and be quiet
	rc_status
	;;
    restart)
	## Stop the service and regardless of whether it was
	## running or not, start it again.
	$0 stop
	$0 start

# Remember status and be quiet
	rc_status
	;;
    reload)
        exit 3
        ;;
    status)
	echo -n "Checking for service mdadmd "
	## Check status with checkproc(8), if process is running
	## checkproc will return with exit status 0.

# Return value is slightly different for the status command:
	# 0 - service up and running
	# 1 - service dead, but /var/run/  pid  file exists
	# 2 - service dead, but /var/lock/ lock file exists
	# 3 - service not running (unused)
	# 4 - service status unknown :-(
	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
	
	# NOTE: checkproc returns LSB compliant status values.
	checkproc $mdadmd_BIN
	# NOTE: rc_status knows that we called this init script with
	# "status" option and adapts its messages accordingly.
	rc_status -v
	;;
    *)
	echo "Usage: $0 {start|stop|status|try-restart|restart}"
	exit 1
	;;
esac
rc_exit

Places

File mdadmd of Package mdadm (Revision 20abf164f4cd26b2a8322ed6c565d2c2)

Places