File perl-AnyEvent.changes of Package perl-AnyEvent

Overview Repositories Revisions Requests Users Attributes Meta

File perl-AnyEvent.changes of Package perl-AnyEvent (Revision 0ffbd65b0f820b3ca2947a1453def7ee)

Currently displaying revision 0ffbd65b0f820b3ca2947a1453def7ee , Show latest

-------------------------------------------------------------------
Fri Oct  4 09:15:29 UTC 2013 - coolo@suse.com

- updated to 7.05
     - uts46data.pl couldn't be found due to wrong naming of the file
        (reported by Fulko Hew).
      - handle lone \015's properly in AE::Handle's default line read
        (reported by various people).
      - untaint ip addresses found in /etc/hosts (patch by José Micó).
      - the memleak fix in 7.03 caused resolving via /etc/hosts to always
        fail on first use (reported and testcase by Andrew Whatson).
      - expose AnyEvent::Log::format_time, and allow users to redefine it.
      - expose AnyEvent::Log::default_format, and allow redefinition.
      - expose AnyEvent::Log::fatal_exit, to allow redefinition.
     - AnyEvent::Debug shell can now run coro shell commands, if available.
     - t/63* tests were wrongly in MANIFEST.
      - kernel.org's finger server went MIA, switch to freebsd.org and
        icculus.org.
      - clarify that IO::AIO and AnyEvent::AIO are needed for AnyEvent::IO
        to function asynchronously (reported by Daniel Carosone).
      - hard-disable $^W in most tests, it generates too much garbage output.
      - use a (hopefully) more future-proof method to emulate common::sense.
      - upgrade to UTS-46:6.2.0.
      - switch to INSTLIB from INSTLIBDIR, as INSTLIBDIR was wrongly
        documented. should not affect anything.

-------------------------------------------------------------------
Mon Jun  3 11:24:29 UTC 2013 - coolo@suse.com

- updated to 7.04
      - debugging code left in.
      - AnyEvent::Socket::inet_aton did not work when dns resolution was
         used to find the addresses (analyzed and patch by Maxime Soulé).
       - fix a memory leak in the /etc/hosts lookup code when hosts don't
         resolve and are not in hosts (analyzed by sten).

-------------------------------------------------------------------
Tue Sep  4 13:00:21 UTC 2012 - coolo@suse.com

- updated to 7.02
   - AnyEvent::Util::run_cmd could block indefinitely (analyzed and test
     program by Yorhel).
   - verified that AnyEvent::Socket follows RFC5952.
   - try to parse "ADDR#PORT" in addition to "ADDR PORT".

-------------------------------------------------------------------
Wed May 30 07:48:20 UTC 2012 - coolo@suse.com

- it's not noarch

-------------------------------------------------------------------
Fri May 25 03:22:50 UTC 2012 - coolo@suse.com

- updated to 7.01
       - fail with EPROTO in AnyEvent::Handle wqhen TLS is requested but
          not available, instead of throwing an exception.
       - use File::Spec to get the tmpdir in t/*, to avoid needless
          failures on (most, not mine :) windows boxes.
        - new handle read types: tls_detect and tls_autostart.
        - child watchers are broken in POE 1.352 (also many earlier
          versions) and there seems to be no way to work around it, as POE
          itself is inherently racy. Document this regression and add a delay
          in t/68_poe_03_child.t for the time being.
       - new module AnyEvent::IO, that is a frontend to either a pure-perl
          synchronous I/O implementation (AnyEvent::IO::Perl), or to the
          asynchronous I/O extension IO::AIO (AnyEvent::IO::IOAIO).
        - load /etc/hosts only when DNS has no answer.
        - stat /etc/hosts on every access and reload it if it changed.
        - load /etc/hosts via AnyEvent::IO - potentially asynchronous.
        - fix a buggy croak in the dh parameter reading in AnyEvent::TLS.
        - AnyEvent::Log log_to_file and log_to_path now use AnyEvent::IO. As
          a side effect, they now use true appending as opposed to libc
          appending, and the file might not have been opened when the function
          returns.
        - the default logging level was not properly documented in a variety of
          places, this has hopefully been rectified.
       - updated uts46data.pl for unicode 6.1.0.
        - made log messages generated by AnyEvent submodules not
          include the package name anymore, as it will be logged
          by default already.
        - upgrade to the trick used by common-sense 3.5 to work
          around extra warning torture/breakage under perl 5.15.x.
        - log messages by anyevent are now ucfirst, are usually full
          sentences and do no longer include the package name.
        - the storable read type would sometimes throw an exception instead
          of causing EBADMSG (analyzed by Maxime Soulé).
        - work around a bug in openssl 1.0.1 which enforces a minimum rsa
          keysize (reported by Paul Howarth).
       - documented Rocco fabricating statements about AnyEvent and me.

-------------------------------------------------------------------
Fri Feb 10 22:59:49 UTC 2012 - coolo@suse.com

- updated to 6.14
     - AnyEvent::Impl::Tk was broken due to a mysterious "die" inside,
        probably an editing mistake (reported by Darin McBride).
     - AnyEvent::Util::fork_call checked for POSIX availability in the wrong way,
        causing it to fail if POSIX wasn't loaded already (analysed by Rock Power).
     - AnyEvent::Handle::push_read (line => did pass $1 directly, so
        regex-matching inside the callback would change the parameter, despite
        $1 being dynamically scoped per-block. this perl bug is now being
        worked around (testcase by Cindy Wang).
     - $! was clobbered by subsequent calls in tcp_connect, due to
        the postpone not saving/restoring it (analyzed by Richard Garnish).
     - Tk cannot create windows when tainted unless you set a title, so
        set a dummy title for AnyEvent's dummy mainwindow. How dummy.
     - escape any nonprintable/nonascii characters when stringifying
        backtraces.
      - log the reason loading an interface module fails to load at level debug.

-------------------------------------------------------------------
Fri Nov 18 13:45:02 UTC 2011 - coolo@suse.com

- update to 6.1
    - INCOMPATIBLE CHANGE: the default log level is now "4" (error
        and above), and some messages inside AnyEvent have been elevated
        to higher log levels to print by default.
   ... see Changes

-------------------------------------------------------------------
Mon Sep 19 08:04:46 UTC 2011 - coolo@suse.com

- updated to 6.02
   - log_to_syslog now accepts facility strings.
   - log_to_syslog would not allow facilities - "$facility|$level"
     *literally* means that string. sheesh.
   - the CPAN parser got confused and thought we provide Sys::Syslog, try
     to work around.
   - renamed AnyEvent::Impl::FLTK2 to FLTK.
 ... for more see Changes

-------------------------------------------------------------------
Thu Aug 25 15:42:54 UTC 2011 - chris@computersalat.de

- fix deps
  o build for RHEL, CentoS, SLE_10 (Unknown tag: Recommends)
- cpanspec

-------------------------------------------------------------------
Sat Jun 11 22:03:01 UTC 2011 - pascal.bleser@opensuse.org

- switch to bm.pl, as cpanspec created an RPM that didn't provide
  perl(AnyEvent)

-------------------------------------------------------------------
Sat Jun 11 01:27:13 UTC 2011 - pascal.bleser@opensuse.org

- update to 5.34:
  * AE::TLS didn't support both cert_file and key at the same time, due to some
    copy&paste bug
  * improve AE::Handle timeout documentation slightly

- changes from 5.33:
  * AnyEvent::Handle on_connect_error - do not try to destroy a handle object
    when it's already gone
  * update idna algorithm(s) to UTS#46 version 6.0.0
  * preserve trailing dot in idn_to_ascii - testsuite says to preserve, uts46
    says it's an error, and testsuite makes more sense
  * remove leading dots in idn_to_ascii - testsuite says to remove, uts46 says
    it's an error, and testsuite makes more sense
  * fixed a bug in idn ignored character processing

- changes from 5.31:
  * work around a POE bug where POE would first poll for new events and invoke
    handlers BEFORE handling the message queue
  * fix parsing of "domain" statement in resolv.conf
  * stop_read now does just that in TLS mode; see its documentation for caveats
  * update to common::sense 3.4 warning set (some warnings in perl impose an
    arbitrary 32kb limit on regex matches, which affects AnyEvent::Handle)
  * AE::Handle had a broken rbuf_max method and missing wbuf_max method
  * new experimental AE::Handle::resettls method

- changes from 5.3:
  * major IOAsync patch by Paul Evans - 0.33 is required, as the major issues
    with IO::Async have been solved in that version, including the availabilty
    of a default loop!
  * implement new wbuf_max parameter for AnyEvent::Handle
  * added Cocoa::EventLoop backend
  * set CLOEXEC flag on parent-side fd's in AnyEvent::Util::run_cmd, to avoid
    leaking them to any child processes
  * try to force files into the arch-dependend lib directory, for the
    half-"turly obsessive compulsive person"(s) that depend on it

- changes from 5.29:
  * convert EV backend to EV 4.00 API (so better upgrade EV too)
  * AE::Handle: implement dynamic read_size adjustment, add max_read_size
    parameter, reduce default read_size to 2048
  * add some FAQ entries for servers and/or on_eof vs. on_error
  * reduce memory usage slightly when connect was used in AE::Handle
  * work around more segfaults in Tk
  * document tls_ctx => undef as valid
  * detect WNOHANG value at compiletime
  * include some probably linux-only support for building AnyEvent as part of
    the perl core
  * make AnyEvent::Strict truly optional (in case somebody builds a minimal perl...)

- changes from 5.28:
  * due to a glitch, AnyEvent's internal getprotobyname wasn't actually used in
    tcp_server
  * implement AnyEvent::CondVar->new method, which was documented but missing
  * support autoloading of read types in unshift_read
  * AnyEvent::Strict: do the test for invalid fh arguments differently,
    resulting in more informative error messages
  * new AnyEvent::FAQ manpage
  * clarify that you can actually call push_read etc. in on_read
  * put keys and certs in /tmp, not into the current directory and document
    this in the SECURITY CONSIDERATIONS sections of AnyEvent::TLS
  * support ";" as resolv.conf comment character in AnyEvent::DNS
  * AnyEvent::Handle now croaks when negative timeouts are passed
  * add a shitload of TCP_xxx sockopt name constants to AnyEvent::Util,
    undocumented, but who knows when they might come in handy

-------------------------------------------------------------------
Wed Dec  1 13:30:36 UTC 2010 - coolo@novell.com

- switch to perl_requires macro

-------------------------------------------------------------------
Tue Jul  6 08:39:05 UTC 2010 - chris@computersalat.de

- update to 5.271
  - backport to perl 5.8.x.
- 5.27   Sun Jun  6 12:12:05 CEST 2010
  - postpone differently in AnyEvent::Socket now, as
    when not, canceling the connection attempt might fail
    (found by Felix Antonius Wilhelm Ostmann).
  - explicitly check for non-stream sockets in AE::Handle, too many
    clueless people fell into the trap of this somehow working.
  - simplified and reworked the "OTHER MODULES" section.
  - better/more condvar examples.
- spec created by cpanspec 1.78

-------------------------------------------------------------------
Wed May  5 13:51:49 UTC 2010 - lnussel@suse.de

- don't package empty vendorarch directory

-------------------------------------------------------------------
Thu Apr 29 12:21:30 UTC 2010 - lnussel@suse.de

- make noarch

-------------------------------------------------------------------
Thu Apr 29 08:35:06 UTC 2010 - lnussel@suse.de

- new version 2.261
 - AF_INET6 was not properly used from Socket6 during configuration
   time (found by Andy Grundman).
 - don't generate spurious readyness notifications when select
   returns EINTR in the pure perl backend (analysed and testcase
   by Bas Denissen).
 - give same examples in SYNOPSIS sections of AnyEvent and AE.
 - provider faster implementations for AE::time/now/now_update for
   EV and Perl backends.
 - provide faster AE::cv and AE::time implementations for all
   backends.
 - no longer support lower/mixed-case signal names (this was
   never documented nor universally supported).
 - some more memory-optimisations, and somewhat less messy
   code to cope with both AnyEvent and AE APIs.

-------------------------------------------------------------------
Tue Mar 16 10:01:17 UTC 2010 - lnussel@suse.de

- new version 5.251
  - fix a race condition in AnyEvent::Handle that would cause
    a "bio_read: unsupported method" error (in _another_
    ssl connection) after user code threw an exception.
  - added AnyEvent::Handle->destroyed method.
  - speed up AnyEvent::Socket::format_address and ::format_ipv6.
  - the AnyEvent::Util::fh_nonblocking function worked only
    by lucky accident on win32.
  - smaller and faster AnyEvent::Util::fh_nonblocking.
  - when the (required!) Time::HiRes module is missing, AnyEvent
    did not fall back to built-in time properly.
  - do not load Fcntl at runtime, saving memory and loading time.
  - precompile a number of constants and use them instead of runtime
    detection and eval.
  - free detection code after detection and similar memory optimisations.
  - Perl backend timer interval best effort drift has been improved
    (ame algorithm as EV).
  - update unicode idna mapping table.

-------------------------------------------------------------------
Fri Feb 26 14:38:38 UTC 2010 - lnussel@suse.de

- new version 5.24
  - JSON dependency optional
  - IDN support
  - IPv6 support

-------------------------------------------------------------------
Fri Sep  4 19:39:55 CEST 2009 - chris@computersalat.de

- spec mods
  o added header
  o added perl-macros
  o cleanup
- fixed deps
  o Requires
     perl = perl_version
     perl(JSON) >= 2.09
  o added Recommends
     perl(EV) >= 3.4
     perl(JSON::XS) >= 2.2
     perl(Async::Interrupt) >= 1.0
     perl(Net::SLeay) >= 1.33
     perl(Guard) >= 1.02

-------------------------------------------------------------------
Thu Jun 11 23:00:41 CEST 2009 - jw@novell.com

- initial build of AnyEvent-4.352.tar.gz

Places

File perl-AnyEvent.changes of Package perl-AnyEvent (Revision 0ffbd65b0f820b3ca2947a1453def7ee)

Places