openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

File fldigi.changes of Package fldigi (Revision 698390318cbd4381a5232b6e47f4737c)

Currently displaying revision 698390318cbd4381a5232b6e47f4737c , Show latest

-------------------------------------------------------------------
Thu Feb  4 08:26:24 UTC 2021 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- Update to version 4.1.18
  WF fft controls
    * Restore averaging, fft pre filter, latency controls
  Debug text
    * add millisecond timing to debug time stamp
  flarq build
    * fix broken build for ./configure --disable-fldigi --enable-debug
  Exit processing
    * Set PTT off if user elects to close fldigi with PTT enabled.
      - works for both Files/Exit and the dreaded windows decoration
        bar 'X' button.
  Scheduled Macro
    * Add PTT OFF during scheduled count down
    * Add clock display on status bar during scheduled count down
    * remove end-of-line '\n' white space between macro tags, i.e.
        <!WPM:24>
        <LOCAL><!SKED:12:00>how now brown cow<RX>
      becomes
        ^!^!how now brown cow
      after parser substitutions
    * Add space ' ' to end of inserted file <FILE:...> if file does
      not contain either ' ' or '\n' as last character
  xmlrpc
    * flrig detection update
  flarq debug
    * fix to allow --enable-debug with flarq build
  Doc update
    * CW CAT keying, add IC705 to list of tested transceivers

-------------------------------------------------------------------
Wed Dec  9 21:27:32 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- Update to version 4.1.17
  N3FJP support
    * remove sending OTHER8 category for all logs
  CW keying
    * added Elecraft KY cat command CW string keying
      . K3S tested
    * added Kenwood KY cat command CW string keying
      . TS-480 tested
    * added Icom cat command CW string keying
      . IC-7100, IC-705 tested
    * added Yaesu cat CW string keying
      . FT-991a tested
    * For use ONLY with
      . RigCAT transceiver control
      . flrig transceiver control
        - requires flrig 1.3.53 or greater
  Rx Monitor
    * fluid source cleanup
    * split UI source from confdialog.fl
  Contestia / Olivia
    * Added mode CONTESTIA 16/250 with RsID 275
    * Added macro code to allow any valid Contestia or
      Olivia BW/TONES combination to be set via macro tags:
      . <MODEM:CONTESTIA:BW:TONES>
      . <MODEM:OLIVIA:BW:TONES>
      . where BW in set {125, 250, 500, 1000, 2000}
           TONES in set {2, 4, 8, 16, 32, 64, 256}
  Greek translation
    * Update to Greek po file

-------------------------------------------------------------------
Wed Nov 18 21:02:00 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- Update to version 4.1.16
  Cty.dat
    * Update distibution cty.dat data files
      dated 12 November 2020
  Greek translation
    * Update to Greek po files
  Globals
    * fix MODE_THOR_FIRST entry.
    * fix MODE_DOMINOEX_FIRST entry.
  fmt fixes
    * track colors not correctly shown on tracking indicators
  view_cw
    * change sample rate to be keyed to cw decoder samplerate
  Canadian Provinces
    * update user configuration panel
  FreeBSD/nullptr
    * nullptr is defined in _null.h
  Navtex
    * fix kml file clean up code
  benchmark
    * update to current gcc version
  Phase and FEC quality display
    * Add phase-accuracy display for PSK modes (non-PSK31)
    * Added better FEC confidence code to THOR
  Add new platform optimizations
    * added new --enable-optimizations options to ./configure
      RaspberryPi 1,2,3,4 [rpi1, rpi2, rpi3, rpi4]
      BeagleBone Black [bbb]
      Cyclone5 [cyclone5]
      Optimize for sse4 [sse4]
      Use AVX extensions [avx, avx2]
      i486, i686 [i486, i686]
      x86-64 [x86-64]
      ARM CPU-native [nativeARM]
  Updated Doxygen Sourcecode Docs
    * Now renders to SVG for graphics (doxygen 1.18)
    * Fixed scripts for Cppcheck 1.9 changes
    * Added auto-installer for packages on Debian-like systems
    * Improved main page: index.html
  fonts
    * fix slow start caused by font fixed/proportional enumeration
    * fixed evaluator moved to separate thread during first
      instantiation of Font_Browser class.  Actual time to enumerate
      2650 fonts on an i5 3.2 GHz system is approximately 25
      seconds. Background process does not effect UI, but selection
      of fixed fonts in font browser dialog may not show all of the
      fixed fonts until the evaluator thread exits.
  PSK Reporter query
    * request fails to pskreporter, caused by hard coded request to NWS
      pskreporter site very slow in responding to connect request; caused UI to freeze.
    * change request process to separate thread
  Logbook compile warning
    * replace strncpy with "*comma_position ="

-------------------------------------------------------------------
Sun Nov  1 15:08:05 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- Update to version 4.1.15
  Doxygen cleanup
    * Clean up warnings on Doxygen txt files
  documentation update
    * remove deprecated pages
    * reorganize Table Of Contents
    * insure no missing page references
  VUmeter
    * add VU style input signal level monitor to main dialog
      - shares space on status bar
    * modify vumeter class to allow widget resize and partial
      display of 130 db Vu scale.
    * restore state of main dialog vumeter on startup
    * update documentation
  W1AW-macros
    * Add <LOCAL>
    * use local time for all subsequent scheduling macros
    * add macro tag <BUFFERED>
      - transmit characters are saved to and retrieved from
        a hidden text buffer.
      - prevents user from moving Tx cursor into middle of
        macro which causes macro to pause
      - Tx panel text is used if <BUFFERED> not present in the
        macro text
    * fix Farnsworth WPM macro tag
  County Lists
    * added Alberta, Saskatchewan
    xmlrpc rig timeout
    kml
  DXCC lookup
    * Change all references to "United States" to USA
    status locale
    Level indicator
  FeldHell
    * Fix font resize bug
      - caused intermittent seg fault
      - caused loss of raster
  hamlib NET
    * fixes for connecting to rigctld from fldigi
    * added "Default" button to hamlib configure panel    
  NanoIO
    * MORTTY V4 compatibility changes
  cluster dupcheck
    * add dupcheck to dxcluster CALL select
  ADIF Conformity
    * The ADIF-specification defines number-values as dot-separated.
    * Localization seperates by comma on non-english systems. This
      changes the behavior to dot separation in the FREQ-value.
    XmlRpc Exit
  Navtex
    * Fix and simplify the correlator
      - Make sure the correlator only ever jumps +delta or -delta to
        the early or late accumulator, and never the long way around.
      - The adjustment limiting code had a bug that never seemed to break
        anything; simplify that code by removing the special case.
    * fixed memory leaks, simplifiedexit code, improved C++17 compatibility

-------------------------------------------------------------------
Mon Jul 20 22:32:45 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- Update to version 4.1.14
  fonts
    * modify start up font enumeration
      - sort system fonts with qsort
      - enumerate fixed fonts
      - add fixed/all selector to font selector
      - use static class members []
        . instantiated and initialized on first instance
        . deleted when all instances deleted
    * change FreqControl width sizing to one based on widest
      numeral for selected font.
  Navigator
    * Fix missing initialization code for Windows OS
  hamlib
    * changes driven by hamlib 4.0
  Build scripts
    * remove -lregex from mingw cross compile scripts
  localtime_r
    * add timeops.h to n3fjp_logger.cxx
  Freq Analysis
    * Add Rx RIT control
      - apply as linear correction to observed frequency
    * Disable rxppm corrections when frequency analysis modem
      is active
  Field Day Logger
    * Fix reconnect to server when changing bands/modes
  flarq update
    * Replace text widgets with fl_input2 and F_Edit widgets.  Adds
      UTF-8 character handling.
    * Add restoration of beacon after cessation of ARQ exchanges
    * Modify fldigi to correctly display UTF-8 characters during
      both transmit and reception of flarq text
  Navtex
    * Fix crash in navtex code
    * remove the NOSIGNAL state.
    * make early/prompt/late detector able to lock onto more signals
  Sound Record
    * Insure that audio recordings have .wav extension
  Freq Control
    * change to use unsigned long to represent the frequency value
      maximum value increased to 4294967295 (2^32-1)
  Cabrillo logs
    * correct Cabrillo report MODE entry
  sound.cxx warning
    * fix compile warning on indentation
  SNDFILE
    * change SNDFILE to a required library
  FSK HELL
    * invert video reversal on HELL 80
    * rename FSK_HELL -> FSKH245
    * set default filter bandwidth for each mode
  Store/Recall
    * Change Store/Recall menu items to mode_info[].name vice
      mode_info[].sname
  wefax
    * Change bandwidth selections
  Rx Monitor
    * Add test for existence of filter in monitor playback

-------------------------------------------------------------------
Wed May 27 19:07:13 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Update to version 4.1.13
  doxygen
    * add new documentation files
  cw prosign
    * fix loss of prosign AA
      - conflict with Northern European accented characters
  Analysis mode
    * Add Zulu time readout to status bar
  Debug Sources
    * remove bMOREINFO
    * add "Data Load" toggle to Debug sources
    * add "Synop" toggle to Debug sources
    * add "KML" toggle to Debug sources
    * remove deprecated command line parameters
      - --debug-pskmail, use debug source ARQ
      - --debug-audio, use debug source AUDIO
    * redesign Event Log dialog to make selection of level and
      sources more intuitive
  wefax
    * Modify phasing algorithm to measure, analyze and act upon
      ratio of white and black intervals.
    * Change default center frequency to 1900. Allows detection
      of start tone @ 300 Hz, stop tone @ 450 Hz.
    * Simplify FM detector.  Use complex functions vice I/Q logic
    * Redesign user interface
      - always use internal Rx panel
      - always use external Tx dialog
      - move infrequently used controls to configuration dialog
    * Rewrite pic and image classes
    * Add user correlation control to config panel
    * Correct transmit methods
      - Start/Stop signals not in spec
      - Transmit duration computation resulted in very long
        transmission
    * update documentation
  README update
    * update reference to winfldigi
  fedora 64 build
    * remove Fl::wake calls that require void* data
    * replace with REQ qrunner calls
  Code cleanup
    * remove extraneous debugging lines from code
  fsq sounder
    * restore sounder when starting FSQ from another modem
  Default event log level
    * restore INFO as default
    * change socket events to VERBOSE
  rx_extract
    * imrove behavior servicing multiple instances of flmsg

-------------------------------------------------------------------
Thu Apr 23 17:58:15 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Update to version 4.1.12
  TX auto RST-sent
    * add control-shift-s for inserting RST sent value in TX stream
  CW/DTR/RTS
    * restore missing Nordic characters on DTR-CW
    * enable PTT during CWIO processing
    * allow user to calibrate DTR-CW timing at nominal WPM
      - fractional computed values rounded to nearest integer
        i.e. round(0.5) => 1
    * update documentation
  File/Audio
    * File selection caused cessation of audio processing while
      waiting for user selection.  Results in cessation of signal
      processing including keep alive signals to flamp and flmsg
      if linked.
      - move all UI interaction to main thread
  trx testing
    * replace compiler macros with in-line code to aid in
      debugging
  AFTER macro
    * add AFTER tag to repeat macro after a delay of NN seconds
  CWID button
    * One more time to wrestle the wayward CWID button to the mat
      - fluid definition file "confdialog.fl" OK
      - needed to execute "make flgen" to create new
        confdialog.cxx/h files

-------------------------------------------------------------------
Fri Apr  3 07:23:05 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Update to version 4.1.11
  * Bug fix release only - no functional changes

-------------------------------------------------------------------
Wed Apr  1 19:03:08 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Update to version 4.1.10
  AWOL CW id button
    * Fixed "hidden" state of CW ID button
  Macros
   * Restore execution code for <TUNE
   * Retain delayed execution code for <!TUNE
   * Create new macro <@TUNE
   * All three versions allow tune interval to be spec'd
     in fractional seconds, i.e. 2.5, 5.1 10.0 15
   * <TUNE:nn.nn> used alone returns to receive
   * <TUNE:nn.nn> followed by tex1t remains in transmit
     to complete the transmission.
   * Examples:
     + <TUNE:10.0>
     + <TUNE:5>
       <TX>tune test <!TUNE:1.5> de w1hkj k
       <RX>
       <@TUNE:2.5>
   * Remove text size restriction on CPS test report.
  RigCat config
    * restore missing control labels
  CW 5 wpm
    * 5 wpm farnsworth speed demands larger OUTBUFSIZE
      - increase output buffer to 65536
  audio alert
    * fix seg fault
      - test for existence of audio_alert instance
  analysis mode
    * changes to data file output
  flrig auto off
    * add ability to shutdown flrig/xcvr during fldigi shutdown
  maclogger
    * correct interpretation of UDP frequency string
    * update transceiver frequency based on UDP frequency
  mkappbundle
    * modify 'version' to include patch level
  nanoIO
    * Correct TTY interface code
  start/stop transitions
    * add code to soften the start/stop transitions for all modems
  CW DTR-RTS
    * generate CW on selected DTR/RTS signal line
    * CW DTR/RTS signals generated concurrent with AF counterparts
      and within a separate thread.
  Olivia 2 tones
    * correct trailing edge cutoff of postamble tones
  Xmlrpc Xcvr
    * enable QSY when Xmlrpc client xcvr is connected
  mp3
    * simplify mp3 conversions
      - test for file access using fopen
      - use linear sample rate converter
  contestia cr
    * correct suppression of <CR> display
  serial port
    * insure that DTR and RTS are always disabled when closing port
  Check Version
    * correct version check logic

-------------------------------------------------------------------
Sat Jan 18 20:40:51 UTC 2020 - Martin Hauke <mardnh@gmx.de>

- Update to version 4.1.09
  * Alert/Rx-monitor playback
  * Dialog closure
  * PO updates
  * config-dialog-mod
  * cw mods
  * MilliSleep
  * New Install
  * Audio alerts disable
  * Winkeyer
  * lotw mangled report files
  * Analysis mode
  * ARRL CW bulletins
  * hamcall
  * RSID code assignments
  * tree metaphor
  * Log ADIF export
  * xmlrpc_rig
  * Rx monitor
  * Display Logbook Datum
  * RTTY bell
  * Combo Box behavior
  * cw prosigns
  * CW International Chars
  * Xmt Audio file
  * Alerts
  * Data file update
  * Wefax autosave
  * flrig freq/mode
  * Update check
  * WEFAX AFC

-------------------------------------------------------------------
Mon Aug 26 20:51:34 UTC 2019 - Martin Hauke <mardnh@gmx.de>

- Update to version 4.1.08
  - Greek translation files updated by Haris SV1GRB
  - xmlrpc <vector>
    . This reverts commit d681ab54b31100878e16bf2c8c2b9a96ceb2de23.
    . avoid sizing a zero length vector; use resize(size, n) for
      non empty return vector
    - Documentation
      . Add missing deadman timer documentation
    - Raster init values
      . Raster::resize() was being called with a negative
        width or height due to bad state being stored in the
        config.  This resulted in fldigi crashing before the
        UI was displayed.
      . submitted by Stephen Hurd <shurd@FreeBSD.org>
    - Image transmit docs
      . Correct manual for thor, mfsk, ifkp and fsk image transfer.

-------------------------------------------------------------------
Thu Aug  8 18:43:31 UTC 2019 - Martin Hauke <mardnh@gmx.de>

- Udpate to version 4.1.07
  * FL_LOCK
  * wf mods

-------------------------------------------------------------------
Tue Jul 23 19:44:19 UTC 2019 - Martin Hauke <mardnh@gmx.de>

- Udpate to version 4.1.06
  * nanoIO
  * FD server disconnect
  * Calendar
  * Warnings etal

-------------------------------------------------------------------
Wed Jul  3 19:30:39 UTC 2019 - Martin Hauke <mardnh@gmx.de>

- Udpate to version 4.1.05
  * LoTW fllog
  * Modem macro
  * Close Logbook
  * eQSL

-------------------------------------------------------------------
Wed Jun 19 20:33:59 UTC 2019 - Martin Hauke <mardnh@gmx.de>

- Update to version 4.1.04
  * add debug statements to track access to remote log server
    xmlrpc <vector>
  * fix for zero length byte vector instantiation on Fedora global
    build LoTW delivery
  * Change to testing for LoTW delivery status Apple kill button
  * force coordinated shutdown for command-Q, red-X decoration button,
    or File/Exit process main dialog title
  * force Windows to update window title when connecting to ACL
    Contestia/Olivia
  * Add contestia submodes to contestia modem type - needed to
    enable rsid contestia submode detection
  * Add missing submodes to Olivia Warnings
  * correct warnings discovered by newer 64 bit compiler Log reports
  * correct output formatting of text and csv reports Documentation
    update
  * update contest section 7qp multi
  * Parse multi state/county report strings n3fjp
  * restore named digital modes to MODE entry passed to loggers.
  * restore ALC compatible controls CALL, FREQ, BAND, MODE, NAME,
    QTH, STATE/PROVINCE, COUNTRY, GRID, POWER, COMMENTS, DATE,
    TIME-ON, TIME-OFF wfonly controls
  * correct control positioning
  * allow visibility of Rev, Store, Lock controls Read log debugging
  * Added event logging statements to the read log file function.
  * Add wait for modem change to the execute method pMODEM(...)
    DE QSO Party
  * Add Delawre QSO party to configurable contests

-------------------------------------------------------------------
Sun Jun 16 09:29:57 UTC 2019 - Wojciech Kazubski <wk@ire.pw.edu.pl>

- Update to version 4.1.03
  * correct wf update loop
  * Disable WinKey serial echo for emulators like K3NB Arduino sketch.
  * modify default CQ macro to include RsID on/off
  * Add code to correctly recognize OLIVIA submodes
- Update to version 4.1.02
  * change to allow concurrent timed dialogs
  * insure that multiple dialogs do not overlie each other on UI
  * remove multiple goto's on RsID detection notification dialog
  * correct resizeing of timed dialog
  * separate eQSL / LoTW alert dialogs instances - allows both to
    be visible concurrently
  * ignore multiple RsID notifications when notifier dialog is
    visible
  * display eQSL notifier when operating with external fllog
  * deprecate the xmlrpc rig control tab
  * add event log to waterfall only UI
  * add VERBOSE events to all xmlrpc calls
  * change waterfall redraw processing to timed updates,
    independent of trx thread timing
  * Language update: add pl.po changes
  * Documentation update
  * Add "N3FJP Amateur Contact Log" to title bar when
    connected to external logger
  * CQzone: add to xmlrpc add_record method
  * trx_xmit_wfall_draw: change thread test to TRX_THREAD
    vice MAIN_THREAD
  * Log rotation
  * Secure METAR
  * lgbook File: add code to populate the logbook dialog widget
    txtLogFile "File:"
  * remove C style memory functions from qzlib implementation
  * add limits testing on get_word method to prevent
    stack corruption
  * add MY_CALL, OP_CALL, MY_QTH and MY_LOCATOR fields to ADIF
    xmlrpc record
  * QTE-QRB: Make hover over Rx panel CALL text work with 
    external fllog
  * Update globals entries for OLIVIA modes / submodes
  * add logbook backups
  * ARQ server: correct logic for testing loss of client
  * Update log dates when fldigi submits either eQSL or LoTW
  * XmlRpc Log Dup Check: Change for tri-state return from
    xmlrpc duplicate test
  * change flrig ptt keys modem default to false in configuration.h
  * DxCluster/N3FJP i/o: changed method calls to agree with socket
    class changes
  * corrected multiple "connection refused" dxcc connect attempts
  * only submit eQSL / LoTW if set in configuration
  * update submit date eQSL
  * modify build.m4 and src/Makefile.am to suppress bogus
    -fvisibility-inlines-hidden warnings during cc compilation
     of mbedtls source.
  * changes to isolate notify_dialog from invoking thread
  * MODE export: allow log database to export non-fldigi modes 
    such as FT8
  * add flarq_socket.cxx - insulate flarq build from fldigi includes
  * Add eQSL field to export data
  * Add timed eQSL delivery status message dialog
  * Add sub mode export if valid ADIF entry
  * tod clock start move to after debug init
  * ARQ socket i/o: Increase debug text size to accommodate large
      arq texts from flamp.
  * ARQ socket i/o: Insure that data streams are always bound to
      data blocks
  * ARQ socket i/o:   prevent receive socket buffer overruns
  * ARQ socket i/o: correct TOD clock
  * analysis mode: add signal amplitude to output csv file

-------------------------------------------------------------------
Tue Feb 19 19:19:22 UTC 2019 - Martin Hauke <mardnh@gmx.de>

- Update to version 4.1.01
  * CW h/w ptt
  * nanoIO
  * NAVTEX abort
  * dup-check
  * ADIF submode
  * WF only bug fix
  * LotW
  * Pedantic warnings
  * SD counties
  * QRZ.com
  * SV1GRB test report

-------------------------------------------------------------------
Tue Jan 29 15:13:23 UTC 2019 - mardnh@gmx.de

- Update to version 4.1.00
  * po update
  * WWV doc
  * Winkeyer FSK
  * Contests
  * arq-override
  * flmsg-dir
  * contest-docs
  * fldigi_def.xml
  * socket_mods
  * Fltk 1.4 mod
  * wefax
  * nanoIO
  * CW SOM table
  * flrig: macro
  * Audio adjust docs
  * feldhell
  * C-11 fixes
  * nano FSK
  * Mint-19/Mate
  * Signal Browser documentation
  * flrig seg fault

-------------------------------------------------------------------
Sat Aug 18 17:55:39 UTC 2018 - mardnh@gmx.de

- Update to version 4.0.18
  * CPS testing
  * ipv6 addressing
  * MT63 centering
  * fsq mods
  * IFKP/THOR greyscale image
  * Hamlib bug fix
  * Tooltip
  * nanoIO
  * THROB adif
  * RigCAT dialog

-------------------------------------------------------------------
Wed Jun 13 06:17:01 UTC 2018 - mardnh@gmx.de

- Update to version 4.0.17
  * flarq idtimer
  * Greek language update
  * tmpfile
  * xmlrpc cat string
  * Modem start frequency
  * Serial port discovery
  * Log entries
  * flarq appdir
  * rx/tx
  * RTTY Quick pick
  * quick pick rtty baud
  * Documentation Update
  * CW/FSK I/O on start
  * WinKey PTT
  * Navigator
  * nanoIO
  * Default Lighted Button
  * ST/PR macro tags
  * K2/K3/KX3 data modes
  * Logbook read
  * 8pskF
  * fsq/ifkp audit logs
  * RTTY browser decode

-------------------------------------------------------------------
Sun Feb 11 13:47:48 UTC 2018 - mardnh@gmx.de

- Update to version 4.0.16
  * wo seg fault
  * 8psk lockup problem
  * Miscellaneous menu
  * pskrep autostart
  * Grid Square Contest
  * Logbook Export

-------------------------------------------------------------------
Sat Jan 20 11:53:11 UTC 2018 - mardnh@gmx.de

- Update to version 4.0.15
  * ARQ server
  * Signal gain

-------------------------------------------------------------------
Tue Jan 16 14:58:21 UTC 2018 - mardnh@gmx.de

- Update to version 4.0.14
  * linux shutdown
  * remote logbook
  * ARQ exit seg fault
  * WEFAX auto center behavior
  * WEFAX phasing change button
  * RTTY configure initializers
  * File aging
  * PSK IMD
  * Spectrum Display
  * Warnings in sound.cxx

-------------------------------------------------------------------
Sat Dec 30 13:50:09 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.13
  * Language Translation
  * cw t/r - doc update
  * Spectrum Analyzer
  * TS990 tune feedback
  * OS X CW
  * FSQ/IFKP clear tx panel
  * deadman
  * Image transmit
  * flrig race
  * CW Sweepstakes
  * CW no tx char
  * timeops
- Run spec-cleaner

-------------------------------------------------------------------
Mon Dec 11 15:19:41 UTC 2017 - mpluskal@suse.com

- Small package cleanup
- Do not use scriplets on Factory where they are not needed anymore
- Run tests during build

-------------------------------------------------------------------
Mon Dec 11 15:01:19 UTC 2017 - crrodriguez@opensuse.org

- BuildRequire pkgconfig(x11) not xorg-x11-devel

-------------------------------------------------------------------
Wed Nov  1 19:42:08 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.12
  * Farnsworth timing
  * PSK sinc filter
  * ACL interface
  * Text capture
  * OSX start process

-------------------------------------------------------------------
Sun Oct 15 19:10:12 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.11
  * Text Capture
  * FreeBSD mod
  * Documentation update
  * PSK filter
  * Audio Stream
  * printf cleanup
  * CW Multichannel
  * QSY multi

-------------------------------------------------------------------
Sun Oct  1 14:37:47 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.10
  * WX HamQth bug fix
  * win7 mingw build fixes
  * wefax ui mods
  * wefax_map
  * auto start

- Update to version 4.0.9
  * doc update
  * clock_gettime
  * spectrum display
  * Test Signal Dialog
  * dxcluster fonts
  * smod
  * Spot buffer
  * Winkeyer clones
  * PSK s/n imd
  * RX Text capture
  * PSK viewer

-------------------------------------------------------------------
Sun Aug  6 04:48:54 UTC 2017 - bwiedemann@suse.com

- Override build date, user, hostname to fix build-compare (boo#1047218)

-------------------------------------------------------------------
Sat Jul 22 09:14:14 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.8
  * Fix OS X path name to executable when SPACE chars are in path name
  * Fix Flex serial interface problem
  * rigCAT metering
    Change to allow multiple scale points in both Smeter and Power
    meter OS X autostart Fix crash if autostart file name points
    to a non existent folder
  * RigCAT i/o
    - Fix missing mutex's on sendCommand
    - Modified SCU-17 stop bit fix; DCB.stopbits must be 0 on 2nd port
  * XMLRPC rx stream
    - Correct missing CW rx stream characters to xmlrpc rx.get_data call
  * RX text paste
    -  Add code to disallow pasting text into the Rx text widget
  * FSQ triggers add mycall test for FSQ triggers FSQ image
    - fix fsq tone deafness after receiving image

-------------------------------------------------------------------
Sun Jul  9 13:37:20 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.7:
  * Add SCU-17 select for separate serial port PTT.
    SCU-17 second COM port requires stop bits to be set
    to ZERO, or the Windows driver fails to give access
    to the DTR / RTS controls.
  * bindUDP
  * Issue with bindUDP using IPv6 calls

-------------------------------------------------------------------
Mon Jun 26 12:49:09 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.6:
  * flmsg alert - added enabled test
  * Time Macros - Corrected <LT> format string
  * Require PortAudio - fail compilation if portaudio not detected
  * documentation update

-------------------------------------------------------------------
Wed Jun 21 11:38:18 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.5:
  * Change to support IPv6 sockets
  * PTT selectable on N3FJP interface 
  * Selection of full/half duplex audio interface
  * Macro and audio alerts enabled for FSQ modem
  * Audio alerts for pre and user defined events
  * Added warning dialog to Restore configuration button
  * CW user selectable squelch attack/decay
  * CW Extended UTF-8 Morse characters
- Remove patch:
  - fldigi-license.patch (fixed upstream)

-------------------------------------------------------------------
Tue Jun 13 10:38:54 UTC 2017 - mpluskal@suse.com

- Update to version 4.0.4:
  * cw scanner
    + adds multi signal scanner / browser
    + Sound Card
      + keep input and output sound card devices open for duration
        of fldigi execution
      + Corrected tune output device
    + Changed tune, wfid, video and cw-id to use tx offset
  * CW QSY
    + Correct QSY when transceiver in CW and CW-R type modes
  * CALL field size
    + Increased CALL, OP_CALL, STA_CALL from 15 to 30 chars
  * LOG area controls
    + Resize controls to add County entry control.  Allow user
      to select which extra qso field is displayed; country or
      county.

-------------------------------------------------------------------
Tue Jun 13 10:06:51 UTC 2017 - mpluskal@suse.com

- Add fldigi-license.patch to fix obvious typo in license

-------------------------------------------------------------------
Sun May  7 23:34:07 UTC 2017 - jengelh@inai.de

- Strip redundant parts from description.

-------------------------------------------------------------------
Wed May  3 19:04:34 UTC 2017 - mardnh@gmx.de

- Update to version 4.0.3
  + OS X Wizard
  + cw decoder
  + CW wait

-------------------------------------------------------------------
Mon Apr 24 13:48:28 UTC 2017 - mpluskal@suse.com

- Split lang subpackage
- Add dekstop file scriplets

-------------------------------------------------------------------
Sun Apr 16 15:19:11 UTC 2017 - mardnh@gmx.de

- Fix Url
- Use pkgconfig-style for BuildRequires
- Specfile cleanup

-------------------------------------------------------------------
Sat Apr 15 07:38:48 UTC 2017 - dl8fcl@darc.de

- update to version 4.0.2
  see readme.txt

-------------------------------------------------------------------
Tue Mar 28 17:21:51 UTC 2017 - dl8fcl@darc.de

- update to version 4.0.1
  see readme.txt

-------------------------------------------------------------------
Mon Jan 30 21:25:59 UTC 2017 - dl8fcl@darc.de

- update to version 3.23.21 - Maintenance release
  see readme.txt

-------------------------------------------------------------------
Tue Jan 10 23:08:30 UTC 2017 - dl8fcl@darc.de

- update to version 3.23.20 - Maintenance release
  see readme.txt

-------------------------------------------------------------------
Sat Dec 24 21:23:48 UTC 2016 - dl8fcl@t-online.de

- update to version 3.23.19 - Maintenance release
  see readme.txt

-------------------------------------------------------------------
Tue Dec 13 16:07:30 UTC 2016 - dl8fcl@darc.de

- update to version 3.23.18 - Maintenance release
  see readme.txt

-------------------------------------------------------------------
Thu Dec  8 16:53:26 UTC 2016 - dl8fcl@darc.de

- update to version 3.23.17 - Maintenance release
  see readme.txt

-------------------------------------------------------------------
Mon Nov  7 22:56:16 UTC 2016 - dl8fcl@t-online.de

- update to version 3.23.15 - Maintenance release
  see readme.txt

-------------------------------------------------------------------
Sun Sep 18 17:47:37 UTC 2016 - dl8fcl@darc.de

- update to version 3.23.14 - Maintenance release
  see readme.txt

-------------------------------------------------------------------
Sun Aug  7 12:04:56 UTC 2016 - dl8fcl@t-online.de

- update to version 3.23.13 - Maintenance release
  see readme.txt

-------------------------------------------------------------------
Sat Jun 25 07:53:46 UTC 2016 - dl8fcl@darc.de

- update to version 3.23.12 - Maintenance release
  update to Polish translation file, pl.po
  xmlrpc add_tx
    * restored original text.add_tx
    * added text.add_tx_queu to add text to hidden
      transmit queu ... used with flmsg arq
  mfsk xmt filter
    * disabled mfsk xmt filter
  FSQ msg append
    * Add configuration item to allow user to select
      "always append" when saving a # directive message
  FSQ IFKP heard lists
    * Correct FSQ rxtext parsing for heard discovery
    * Change management of heard list for both FSQ and IFKP
  waterfall group
    * remove +2 from waterfall group height
  thor image
    * repaired send image button function
  RxID button
    * set startup color
-------------------------------------------------------------------
Mon Jun 13 08:56:04 UTC 2016 - dl8fcl@t-online.de

- update to version 3.23.11 - Maintenance release
  A lot of bug fixes and improvements - see ChangeLog

-------------------------------------------------------------------
Tue May 31 22:38:13 UTC 2016 - dl8fcl@t-online.de

- update to version 3.23.10 - Maintenance release
  A lot of bug fixes and improvements - see ChangeLog
  
-------------------------------------------------------------------
Mon Apr  4 19:27:48 UTC 2016 - dl8fcl@t-online.de

- update to version 3.23.09 - Maintenance release
  FSQ variable Rx
    * Enable FSQ variable RX
    * Enable allcall(#) menu item for sending file to allcall
  Export ADIF_NAME
    * added FLDIGI_MODEM_ADIF_NAME export variable to environment exports.
  WF only
    * correct for missing reference to power level control
  DnD Image
    * Add Dnd Image to TX panel
      - applies to MFSK, IFKP and THOR image transfers
      - allows operator to insert image processing into TX text stream
      - drag-drop image from system file viewer to TX text panel
      - updated specific modem documentation
  Documentation
    * Correct 'M>' to 'Store' in description of the Store button
    * Amend help file for the frequencies list usage
  Frequencies2 use string
    * added use descriptor string to frequencies2 list
  About
    * update developer list
  View noise
    * send signal / noise composite audio to waterfall during transmit
      - valid when using --noise command line parameter
  Sanitize tile_x, tile_y startup values
    * Fixes: LP: #1478358
      - https://bugs.launchpad.net/ubuntu/+source/fldigi/+bug/1478358
        "fldigi 3.22.13 crashes on start-up when tile_x is large"
      - also applies to 3.23.xx branch
      - this fix prevents a user from editing the fldigi.prefs file
        with out of range values.
  NAVTEX update
    * change the distance between early, prompt, and
      late accumulators to be an integer number of samples.
    * noise and QSB processing
      - average the accumulator values over a longer time period
      - tighten bit tracking feedback loop
        .signal lock takes a little longer
    * make the AFC window a little wider to deal with some signals.
    * instead of requiring 5 consecutive correct characters
      to start decoding, store a stream of bit confidence values and
      require 9 good ones out of 14 total. FEC can take care of the rest.
    * add FEC calculations to do single bit permutations on
      bad characters, flipping the bit with the lowest confidence value.
    * code cleanup - remove unused variables.
  RxID enhancement
    * Add right click pop-up menu
      - PASSBAND - check box ON/OFF
    * Color code ON illumination for
      PASSBAND ON/OFF
  TX timer
    * Added TX timer display to the menu bar
  rigcat mod
    * Add min, max settings for pwr control
    * Add testing mode if no xcvr serial port available
    * Made opMODE and opBW combo controls readonly
      - pull down values can only be added and not inserted
    * Added debugging tags to xml definitions:
      - <NOSERIAL>true/false</NOSERIAL> - default false
        suppress all serial port i/o
      - <ASCII>true/false</ASCII> - default false
        if true, print all CAT i/o events as ASCII strings
        if false, print all CAT i/o events as HEX sequences
    * Added polling for pwr level query
  PSK IMD
    * add IMD generator
    * modified IMD computation for continuous operation
      vice only during DCD

-------------------------------------------------------------------
Thu Feb 25 19:40:03 UTC 2016 - dl8fcl@t-online.de

- update to version 3.23.08 - Maintenance release

NAVTEX update
    * low pass mark & space individually
    * Use ATC and fft-filters adapted from RTTY modem
    * Correct display metric
    * Widen afc filter for 'jump 90 Hz' code
    * Use exact bit length
    * Calculated sync modification
    * see src/navtex/navtex.cxx for design analysis

Save Logbook
    * Change system dialog invoked when saving logbook to
      system save-as vice save.

Analysis mode
    * Restore <CSV:on, <CSV:off, <CSV:t(oggle)

flrig PTT
    * All user to select whether flrig PTT change triggers
      RX/TX change in modem stata

flrig waiting
    * Changed event recording level for
      "Waiting for flrig" from INFO to VERBOSE

COM port close
    * change effects the Windows COM port close process
      - rigCAT startup process no longer dependent on order, xcvr
        can be started before or after fldigi is running.  Tested
        by Haris, SV1GRB.

Mac Logger
    * Added UDP interface to read data exported by MacLogger
      - UDP data stream on socket 255.255.255.255 / 9932
      - User configurable items:
        . enable/disable UDP socket reads
        . Capture and use UDP Radio Report data
        . Capture and use UDP Spot Tune data
        . Capture and use UDP Spot Report data
        . Capture and use UDP Log Report data
        . Capture and use UDP Lookup Report data
        . Enable UDP string capture to file
          file in fldigi files/temp folder
          filename: maclogger_udp_strings.txt
    * Added <signal.h> to threads.h to avoid missing reference
      to sigemptyset in some gcc installs

fsq repeat last
    * test for empty list of previous command

GCC 6 build
    * GCC 6 defaults to -std=gnu++14, and attempting to build fldigi fails
      with a number of errors. One is that C++11 added std::next and so
      because of the "using namespace std" in src/fsq/fsq.cxx the global
      variable 'next' and std::next are ambiguous. That can be easily solved
      by qualifying ::next or adding using ::next at function scope.
    * The other errors are due to the different return type for
      std::complex<T>::real() and std::complex<T>::imag() in C++11 and
      later.

CALL capture
    * add copy call to clipboard when capturing from Rx text

Scope View
    * Corrected saved position/size status values

RigCAT modifications
    * Separated no xcvr functions from rigcat loop operation
    * Corrected hamlib start/stop process to prevent
      lockup when xcvr is not responding to CAT commands
      - hamlib still creates a zombie process when trying to access
        a bogus serial interface such as a bell modem
    * Added string / hex data LOG view
      <LOGSTR>true/false</LOGSTR>
    * Added variable loop timing
      <POLLINT>100...20000</POLLINT>
      default 100 msec
    * Corrected use of BW-REPLY and MODE-REPLY in xml def file
    * Added ability to read and display Smeter and Pwr meter
    * Added debugging statements to exit functions
    * Fixed aberrant save frequencies2.txt file behavior
    * Added manual notch read/write using waterfall
      notch filter interface
    * Added power level control for xcvrs with that CAT command
      - set power level also used for logging
    * Updated tutorial on transceiver xml definition file structure.
    * Added <VERBOSE>bool</VERBOSE> specifier
      - use during development of an xml file

-------------------------------------------------------------------
Sat Feb  6 19:47:28 UTC 2016 - dl8fcl@t-online.de

- update to version 3.23.07 - Maintenance release
    Exit delays
      * thread shut down processes to provide additional logging info
      * speed up shut down process

Contest fields
      * Adjust width of exchange in logging field

OS-X start_process
      * Add App recognition

LOG RECORD exports
      * Added these log entry variables to the export environment list
        - FLDIGI_LOG_STATE
        - FLDIGI_LOG_COUNTRY
        - FLDIGI_LOG_SERNO_IN
        - FLDIGI_LOG_SERNO_OUT
        - FLDIGI_XCHG_IN
        - FLDIGI_XCHG_OUT
        - FLDIGI_VE_PROV
      * Added LOGBOOK log entry variables to the export environment list
        - FLDIGI_LOGBOOK_CALL
        - FLDIGI_LOGBOOK_NAME
        - FLDIGI_LOGBOOK_DATE
        - FLDIGI_LOGBOOK_TIME_ON
        - FLDIGI_LOGBOOK_DATE_OFF
        - FLDIGI_LOGBOOK_TIME_OFF
        - FLDIGI_LOGBOOK_RST_IN
        - FLDIGI_LOGBOOK_RST_OUT
        - FLDIGI_LOGBOOK_FREQUENCY
        - FLDIGI_LOGBOOK_MODE
        - FLDIGI_LOGBOOK_STATE
        - FLDIGI_LOGBOOK_VE_PROV
        - FLDIGI_LOGBOOK_COUNTRY
        - FLDIGI_LOGBOOK_SERNO_IN
        - FLDIGI_LOGBOOK_SERNO_OUT
        - FLDIGI_LOGBOOK_XCHG_IN
        - FLDIGI_LOGBOOK_XCHG_OUT
        - FLDIGI_LOGBOOK_QTH
        - FLDIGI_LOGBOOK_LOCATOR
        - FLDIGI_LOGBOOK_QSL_R
        - FLDIGI_LOGBOOK_QSL_S
        - FLDIGI_LOGBOOK_NOTES
        - FLDIGI_LOGBOOK_TX_PWR
        - FLDIGI_LOGBOOK_COUNTY
        - FLDIGI_LOGBOOK_IOTA
        - FLDIGI_LOGBOOK_DXCC
        - FLDIGI_LOGBOOK_QSL_VIA
        - FLDIGI_LOGBOOK_CONTINENT
        - FLDIGI_LOGBOOK_CQZ
        - FLDIGI_LOGBOOK_ITUZ
      * Enable temp/log.adif for all OS, was just WIN and OS X

HAMLIB CW RTTY
      * provide selectable sideband sense selection for CW and RTTY

PSKR metric
      * Fixed erroneous metric computation when received signal is zero
        - error apparant when testing with CODEC that has no applied audio
        - bug report by Per Crusfalk, SM0RWO

PSKR/8
      * Fix segfault if starting pskbrowser in any of the pskr or 8psk modes

Audio adjust
      * Added Tx/Rx audio adjustment details

WEB query
      * Moved URL strings for various web call sign queries to progdefaults
        configuration.
        - updated hamqth to https address for browser lookup

Mode Set
      * Changed mode_set logic to use std::string vice null terminated C string
      * Changed modes to size NUM_MODES vice NUM_RXTX_MODES.

Tab key docs
      * Added illustration and emended text describing Tab key operation
        in the Tx text buffer.

hamlib PTT_ON_DATA
      * changed PTT_ON to PTT_ON_DATA in call rig_set_ptt

Macro Tool Bar
      * Correct edit / launch behavior of 4 row toolbar
        - removed dependency on 2 bar selection of alternate
          macro set

XmlRpc client update
      * Corrected passing hi/lo cutoff values for supported transceivers
        such as the TS2000.
      * Added macro tags <RIGLO:nnnn>  <RIGHI:nnnn> which make flrig requests
        to respectively set the lo-cut and hi-cut transceiver DSP filter settings.
      * Added get_sideband xmlrpc call to modified flrig

Log Notes
      * Added control for user selection of clearing/retaining data in
        notes field after remote database query.

Misc Updates
      * correct WF hesitation when processing post Tx macros
      * remove xmlrpc_rig ptt transition waiting from main loop
      * correct WF hesitation when transmitting MT63 start tones
      * added CTRL-nnn numeric sequence character entry to Fl_Input2
        class.  Allows direct entry of characters such as ñ in
        QSO fields, macro editor, etc.
      * added new menu items to FTextEdit and Fl_Input2 widgets
        - allow user to select UTF-8 special characters from
          pop-up menu (right click in widget).  This effects
          TX text widgets and all data entry controls which use
          the Fl_Input2 widget.

Set Frequency
      * Added code to update waterfall when changing vfo frequency
        from fldigi / flrig

Rx SaveAs
      * correct Rx panel "Save text as..." end-of-line sequence
-------------------------------------------------------------------
Fri Dec 11 09:35:42 UTC 2015 - dl8fcl@darc.de

- update to version 3.23.06
  * give priority to flrig xmlrpc support independent of any other
    configuration setting for rig control - dependent on fldigi
    detecting an flrig compatible xmlrpc
  * add test for xcvr response loop to set_ptt
  * added XMLRPC_DEBUG with time signature Waterfall only
  * fix segmentation fault introduced by addition of 4x12 macro matrix
  * Added resize methods to both classes; corrects displaced smeter
    and power meter
  * update of documentation

-------------------------------------------------------------------
Mon Nov 23 23:27:55 UTC 2015 - dl8fcl@t-online.de

- update to version 3.23.05
  * disabled kml services unless user enables on kml configuration
    tab. default is ON
  * add dockable macros in a 4x12 matrix
    - provides access to all 48 macros.
    - group of 48 can be dragged to/from it's default position
      just below the main menu bar
  * change vertical raster height to 20 vice 60
    - decreased minimum vertical main dialog dimension for small
      netbook screens
  * update to documentation
  * Add code to allow on the fly correction of corrupt ADIF records
    during file read.
  * Added gpio support for PTT.
    - used primarily by Pi experimenters
    - submitted by Lior, KK6KWA
  * suppress info messages during prog start
    - prodigiuous use of LOG_INFO increases difficulty of
      debugging other aspects of fldigi
    - enable the INFO messages for debugging or to observe
      program flow by setting command line flag
      -more-info ; case is significant
  * Lowered CPU requirements to allow for use on Android/Netbook devices:
    - Added modes 125FL and 250FL with constraint length 13 FEC
    - Adjusted maximum traceback memory for viterbi decoder
    - Set traceback to an optimally-high value in viterbi.cxx constructor
    - 8PSK - 500F 1000F & 1200F now use only 1 viterbi decoder without voting
    - Assigned secondary RsID codes to 125FL and 250FL.

-------------------------------------------------------------------
Thu Oct 15 19:58:20 UTC 2015 - dl8fcl@darc.de

- update to version 3.23.04 - Maintenance release
  * Corrected implementation of CW filter bandwidth
  * add image transfer to thor based on IFKP image processing
    - supported by THOR-11, THOR-16 and THOR-22
    - image modes are identical to IFKP images, fixed sizes and avatar
  * change update check location to Source Forge
  * change merge behavior when parsing unknown field name

-------------------------------------------------------------------
Thu Oct  1 09:14:46 UTC 2015 - dl8fcl@darc.de

- update to version 3.23.03 - Maintenance release
  * Fix for FSQ trigger decode bug introduced by multiple
    directed station parsing

-------------------------------------------------------------------
Sun Sep 27 21:16:35 UTC 2015 - dl8fcl@darc.de

- update to version 3.23.02 - Maintenance release
  FSQ updates
      * added cqcqcq button
        - casual users do not know to send cqcqcq vice
          cq cq cq
      * Updated on-line help
      * Increased allowable intervals for both sounder
        and heard-aging
      * Corrected repeated sounder to re-enable retries
        after a successful sounding.
        - sounder will wait until rx/tx state is RX
        - if Rx squelch is open then sounder will retry
          in 10 seconds.  Retry is repeated 10x before
          sounding is rescheduled for next interval.
      * Corrected text parser to accept multiple directed calls
        - w1hkj:efk2lbm w3fqn ka2cbc good morning all
          will now correctly accept k2lbm, w3fqn and ka2cbc as
          directed and display correctly in Rx text panel
  Other updates
      *  Add definable delay to allow serial devices based
         on Arduino to not lock up in programming mode.
      * Run asciidoc with TZ=0 to make the footer datestamp independent of
        the build machine's timezone (for reproducible builds).

-------------------------------------------------------------------
Tue Sep 22 22:14:10 UTC 2015 - dl8fcl@darc.de

- update to version 3.23.01 - Maintenance release
      * WX configure: corrected inchs mercury to Hg vice Mg
      * fixes for wfall-only operation (N1MM)
      * ifkp avatar: Added code to support variable image depth
        in png source file
      * correct bug in slant correction code of ifkp
      * Change read log routine
        - file read a line at a time vice entire image into RAM

-------------------------------------------------------------------
Sun Sep 20 21:00:06 UTC 2015 - dl8fcl@darc.de

update to version 3.23 - Major revison release
      * clear entire Tx panel when executing a ^r or ^R sequence.
      * add ability to disable start/stop tones in Olivia and
        Contestia
      * fix timer seg fault when Tx contains trash text
      * Incremental Frequency Keyed + modem
        - wide band, moderate speed differential MFSK signal
          with offset +1.
        - sample rate 16000
        - symbol length 4096
        - 33 tones spaced 3xSR/symlen apart approximately 398 Hz
          bandwidth.
        - multiple image transfer formats similar to FSQ
          . Avatar (59x74 WxH pixel) image transfers
        - tunable modem subcarrier (center freq)
          . may be configured fixed at 1500 Hz or
          . set to Psk sweet spot
        - raw data received written to audit log - if enabled
        - heard list entries written to heard log - if enbled
        - assigned fldigi secondary RSID code, (56, 1171)
      * Added @WAIT macro
      * Added disable macro timer when changing modems
      * WEFAX rx becomes unresponsive when writing to INFO log
      * code changes for update to mxe suite
      * Changed qsorec data store to an arrary of string pointers
        vice an array of strings.
        - new mxe implementation string handler changes from standard
      * change to "rb" for correct reading of logbook file
        - do not allow M$ to make changes to CR/LF counts
      * Add recognition of flrig LSB modes
        - adjust waterfall for LSB
        - correct logging frequency for LSB
    FSQ updates
      * Fix copy all on heard list
      * change default color scheme as requested by ZL1BPU
        - added user configuration items for RX text colors
      * remove "MONITOR" text from RX panel as requested by ZL1BPU
      * added fsq tx text queue to handle case when user
        tries to force a second transmit sequence when modem
        is already in TX state.
      * last_command updated to include both queued and transmitted
        text string.
        - allows recall of queued command even if transmit timed out
      * last_command changed to a stack of commands
        - allows recall of up to last 10 commands
        - each press of F2 recalls one deeper in stack
        - rotates back to beginning after recall of most ancient
      * add call to logbook using right click on heard entry
      * Fix erroneous date in audit log when fsq is default
        modem during program start
        - change format of date entry to make it easier to
          find when reviewing the log.
      * Added video text at beginning of transmit
        - also adds ability to transmit pretone
          for amplifier carrier detect
          for FM repeater operation
      * Add code to force center frequency to 1500
        when switching from another modem
      * Fix to avoid time out errors
      * Macintosh OSX thread management
        - submitted by KK5VD
        - Ensure FSQ TX routines are called in the main thread.

-------------------------------------------------------------------
Tue Jul 21 21:27:29 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.13 - maintenance/bug-fix release
  FSQ bug fixs
  * Fixed error in parsing returned heard list
  * Fixed save filename for # trigger
    - filename was not being saved with the .txt extension
    - append existing file
  * Changed time out processing of delayed response
    - added user configuration item for time out duration
  XMLRPC commands
  * Corrected interface values for
    - main.get_char_timing
    - main.get_tx_timing
  * Added following to xmlrpc struct
    - log.set_rst_in
    - log.set_rst_out
  * Added rig.get_frequency (d:n)
  * Deprecated main.get_frequency

-------------------------------------------------------------------
Sat Jul 18 14:28:01 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.12 - maintenance/bug-fix release
  FSQ heard parser, added more restrictive discovery of heard callsign
  - must pass crc8 comparison
  - must pass regular expression test for callsign

-------------------------------------------------------------------
Thu Jul 16 23:33:19 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.11 - maintenance/bug-fix release
  * added FSQCALL(US) compatible modem
  * corrected code-page 1250 Latin-1 extended character keyboard
    entry to UTF-8 strings
  * fix raise window problem when mouse passes over the freq
    control
  * fixed bug in exit procedure.  program failed to exit gracefully
    if TRX_STATE was RECEIVE
  * update to the interface for flrig control/query via xmlrpc

-------------------------------------------------------------------
Mon Jun  1 21:02:22 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.10 - maintenance/bug-fix release
  FTextView styles bug - Corrected order of calling reset_styles
  to prevent calling resize with an improperly initialized styles
  table

-------------------------------------------------------------------
Sat May 30 23:20:19 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.09 - maintenance/bug-fix release
  Fl_Text_Display, Avoid calling resize() too early

-------------------------------------------------------------------
Tue Apr 28 00:33:53 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.08 - maintenance release
  requires libflxmlrpc

-------------------------------------------------------------------
Fri Apr  3 09:40:08 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.07 - maintenance release

-------------------------------------------------------------------
Tue Mar 24 20:46:32 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.06 - maintenance release

-------------------------------------------------------------------
Sat Jan 10 21:02:39 UTC 2015 - dl8fcl@darc.de

- update to version 3.22.05 - maintenance release

-------------------------------------------------------------------
Fri Dec 26 20:03:31 UTC 2014 - dl8fcl@darc.de

- update to version 3.22.04 - bugfix realease

-------------------------------------------------------------------
Wed Dec 10 23:31:19 UTC 2014 - dl8fcl@darc.de

- update to version 3.22.02 - bugfix realease

-------------------------------------------------------------------
Tue Oct 21 07:24:27 UTC 2014 - dl8fcl@darc.de

- update to version 3.22.01 - bugfix realease

-------------------------------------------------------------------
Thu Oct 16 07:50:59 UTC 2014 - dl8fcl@darc.de

- update to version 3.22.00 - major update

-------------------------------------------------------------------
Mon Jun 30 18:50:58 UTC 2014 - dl8fcl@darc.de

- update to version 3.21.83, Maintenance release
      * Add user and programmer documentation
      * send STX, 0x02, signal when ARQ command to
        change modem is completed.
      * Added /opt/vttySn usage for Linux
        - create a linked name to a virtual port (socat)
          with link defined as /opt/vttyS0 ...
      * Changed defaults for new user to force
        - confirm exit, save configuration & macros on first use
        - prompt dialogs thereafter until user changes
          configuration dialog selections
        - added UI configuration to new install Wizard

-------------------------------------------------------------------
Thu May  1 23:43:30 UTC 2014 - dl8fcl@darc.de

- update to version 3.21.82, Maintenance release
  hash-fix
    * fix compile warning on gcc post 4.5
  RnA Analysis
    * Change signal analysis mode to use DFT processing
      to determine best estimate of signal frequency
    * Moved freqanalysis.csv file to temp
      - changed name to analysis.csv
    * Resetting the WF frequency cursor deletes the analysis.csv
      file and restarts recording
    * Added macro control tag <CSV:on|off|t>
      - off - deletes file analysis.csv
      - on  - starts recording of analysis.csv
      - t (toggle) - changes on/off state of recording
  Phase accumulator
    * Corrected phase accumulator limits in cw, feld,
      dominoex and thor modems.
  Base Directories
    * Added FL_APPS directory recognition for placement
      of fldigi.files, NBEMS.files.
      - Linux : Changed from .fldigi to fldigi.files
      - Linux : Changed from .nbems to NBEMS.files
        includes programmatic change of existing directory
        names.
  WF Height/Speed
    * Increase max height to 500 pixels
    * Added control to select the SLOW drop speed
      factor.
    * Modified startup / resize code to avoid out-of-range
      resizing of critical widgets.
  RX Only
    * Added new xmlrpc commands
      - main.rx_only : Disables Tx.
      - main.rx_tx : Enables normal Rx/Tx operation
    * Added command line parameter --read-only; --ro
  RTTY mem leak
    * Closed minor memory leak in rtty.cxx, memory leak
      occured when
      - application closed or
      - baud rate / shift was changed
  Olivia/Contestia custom
    * Fixed indexing error in
      - set_olivia_bw, set_olivia_tones
      - set_contestia_bw, set_contestia_tones
      effects setting custom tones/bw from either
      macro or xmlrpc command string
  ARQ abort
    * Correct mutex deadlock during <cmd>abort</cmd> processing
  RTTY Custom Shift
    * Fixed custom shift selection

-------------------------------------------------------------------
Mon Mar 31 08:28:49 UTC 2014 - dl8fcl@darc.de

- update to version 3.21.81, Maintenance release
    Spotter seg fault
      * bug fix to pskrep
    TX monitor
      * change default state of Tx Monitor to TRUE
      * change default level of Tx Monitor to 0.2
    Audio selectors for PORTAUDIO
      * correct ListBox offset in configuration panel
    M4 tr1 detect
      * add hash.m4 and supporting source code
    ttyACMxx identification
      * Added ttyACMxx USB serial port identification to serial
        port search.
    Olivia critical section
      * added critical section coding to protect encode/decode
        processing
    MT63 critical section
      * re-entrancy issue
        - must guard against changing processing parameters
          during encode/decode
    Logbook fields
      * Modified ordering of fields to prevent wrong
        lookup of fields associated with STX_STRING and
        SRX_STRING, the contest exchange fields
    Hamlib selector
      * Change from Combobox to Listbox
    Combobox
      * add to list when user enters a value
    RTTY macro
      * corrected width/baud/bits setting from macro tag

-------------------------------------------------------------------
Fri Mar 21 20:33:45 UTC 2014 - dl8fcl@darc.de

- update to version 3.21.80, Maintenance release 
    clang compatibility
      * correct istream return value
      * move tr1 to std
    FreeBSD nitems
      * Collision between Fltk-3.0 and FreeBSD system corrected
       in associated fluid definition file.
    Cabrillo time off
      * Limit to HHMM.  Logbook records to HHMMSS
    Change Fl_ListBox
      * Change to Fl_ComboBox for various controls
        which may require user entry.
    Restore Fl_Choice
      * Sound card device selection
    Olivia select fix
    fluid update
      * Prepare confdialog.fl for KISS implementation
    ComboBox
      * remove readonly attribute for input contol

-------------------------------------------------------------------
Tue Mar 11 20:34:53 UTC 2014 - dl8fcl@darc.de

- update to version 3.21.79, Maintenance release
    RigCAT initialize
      * Add additional wait delays to accomodate transceivers
        and virtual serial devices that measure baudrate
      * Fixed flmsg/flnet correspondence bug
    Modem cleanup
      * Fixed a/d range issue with tx attenuator
    Choice-->ListBox
      * Changed all instances of Fl_Choice and Fl_Input_Choice
        to Fl_ListBox.
        - old Fl_Choice objects renamed to listbox_xxx
        - old Fl_Input_Choice objects renamed to i_listbox_xxx
        - Note that i_listbox_xxx objects need indexing offset
          to maintain compatability with progdefaults definitions.
        - New objects should use listbox_xxx naming convention.
        - This removes a rather ugly Fltk widget.  Fltk does not
          have a native ComboBox or ListBox widget.
    combobox-listbox
      * Update to combobox, Fl_ComboBox
      * Addition of listbox, Fl_ListBox
    RTTY normalize
      * Added code to normalize generated RTTY signal to
        maximum allowable signal amplitude
      * Added code to hard limit output signal to range of
        +/- 1.0
    Portaudio ring buffer
      * Increased size of portaudio ring buffer.
        Problem reported by Simon Gander, "I recently found
        out that the THROB1 and THROBX1 modes don't work
        correctly under certain circumstances. The pulses are
        too short and get cut off at the end, which in turn also
        causes the baudrate to be too high. I found out that I
        could fix the problem by increasing the size of the ring
        buffer in the SoundPort class.
    Portaudio error reporting
      * added code to provide addition details for
        portaudio failures

-------------------------------------------------------------------
Tue Feb  4 19:18:46 UTC 2014 - dl8fcl@darc.de

- update to version 3.21.78, Maintenance release

-------------------------------------------------------------------
Wed Oct 30 20:44:03 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.77, Maintenance release

-------------------------------------------------------------------
Sat Sep 14 19:59:50 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.76, Maintenance release

-------------------------------------------------------------------
Tue Sep  3 07:02:17 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.75, Maintenance release
  Important update to RSID detector

-------------------------------------------------------------------
Sun Aug 18 09:30:01 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.74, Maintenance release

-------------------------------------------------------------------
Mon Jul 29 22:09:43 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.73, Maintenance release

-------------------------------------------------------------------
Fri May 17 20:28:14 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.72, Maintenance release
  changes in PSKMAIL, RsID Timeout, Colors/Fonts Dialog

-------------------------------------------------------------------
Thu May  9 05:09:02 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.71, Maintenance release
  Changed ARQ server / client management.
  Wavefile generate, MT63 mode selection,
  Signal Browser Colors, QRZ query, Rigsupport,
  eQSL url, PSKMAIL
  xmlrpc-c replaced by embedded xmlprcpp
  PO file update
  
-------------------------------------------------------------------
Sun Apr 14 20:08:05 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.70
  Contestia/Olivia
  * Quick change / custom dialog
  * Corrected Contestia callback in confdialog.fl
  * Corrected resetOLIVIA function

-------------------------------------------------------------------
Sat Feb  9 20:18:21 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.68, bug fix

-------------------------------------------------------------------
Fri Feb  1 19:44:47 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.67, Maintenance release
  RTTY FSK modem improved

-------------------------------------------------------------------
Sun Jan 13 23:11:20 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.66, Maintenance release

-------------------------------------------------------------------
Tue Jan  1 15:41:44 UTC 2013 - dl8fcl@darc.de

- update to version 3.21.65
  New high speed and multi carrier modems added
  Separate modem initialization for Olivia 
  tone / bandwidth pairs added

-------------------------------------------------------------------
Wed Dec 26 19:09:36 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.64, Maintenance release

-------------------------------------------------------------------
Wed Dec 12 21:24:39 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.63, Maintenance release

-------------------------------------------------------------------
Mon Nov 26 21:39:48 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.62, Maintenance release

-------------------------------------------------------------------
Sun Nov 18 23:24:19 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.61, Maintenance release

-------------------------------------------------------------------
Mon Nov  5 21:55:15 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.60, Maintenance release

-------------------------------------------------------------------
Wed Oct 31 23:48:46 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.59, Maintenance release

-------------------------------------------------------------------
Tue Oct 23 20:11:44 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.58, Maintenance release

-------------------------------------------------------------------
Sun Sep 23 16:52:06 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.52, Maintenance release

-------------------------------------------------------------------
Mon Aug  6 21:19:49 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.50, Maintenance release

-------------------------------------------------------------------
Sun Jul  8 19:07:13 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.49, Maintenance release

-------------------------------------------------------------------
Sat Jul  7 20:22:52 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.48, Maintenance release

-------------------------------------------------------------------
Sat Jun 16 19:44:51 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.43, Maintenance release

-------------------------------------------------------------------
Thu May 31 11:51:01 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.43

-------------------------------------------------------------------
Tue Mar 27 21:47:27 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.41, Maintenance release

-------------------------------------------------------------------
Sun Mar  4 17:26:12 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.40, Maintenance release

-------------------------------------------------------------------
Fri Feb  3 21:36:31 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.38

-------------------------------------------------------------------
Sun Jan 29 19:46:50 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.37, Maintenance release

-------------------------------------------------------------------
Tue Jan 24 09:27:31 UTC 2012 - dl8fcl@darc.de

- update to version 3.21.36, build with fltk-1.1.10 and fltk-1.3.0

-------------------------------------------------------------------
Wed Dec 14 22:32:52 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.33

-------------------------------------------------------------------
Wed Nov 30 08:05:48 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.30, log merging bug fixed

-------------------------------------------------------------------
Wed Nov 23 22:37:50 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.28

-------------------------------------------------------------------
Sun Nov 20 19:18:17 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.27

-------------------------------------------------------------------
Tue Nov 15 06:30:17 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.26

-------------------------------------------------------------------
Fri Nov 11 19:34:23 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.24

-------------------------------------------------------------------
Thu Nov  3 19:31:15 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.23

-------------------------------------------------------------------
Sat Oct 29 15:33:39 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.22

-------------------------------------------------------------------
Mon Sep 26 10:27:17 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.15

-------------------------------------------------------------------
Sun Sep  4 21:20:46 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.14

-------------------------------------------------------------------
Mon Aug 22 12:01:59 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.13

-------------------------------------------------------------------
Tue Jun 28 19:16:02 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.12

-------------------------------------------------------------------
Wed Jun 15 21:55:27 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.11

-------------------------------------------------------------------
Sat Jun  4 13:43:00 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.10

-------------------------------------------------------------------
Wed Apr 20 17:44:09 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.9

-------------------------------------------------------------------
Wed Apr  6 17:39:52 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.8

-------------------------------------------------------------------
Mon Mar 21 07:31:50 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.7

-------------------------------------------------------------------
Wed Mar  9 22:37:53 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.5

-------------------------------------------------------------------
Thu Mar  3 10:31:36 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.4

-------------------------------------------------------------------
Tue Feb 22 05:30:05 UTC 2011 - dl8fcl@darc.de

- update to version 3.21.3

-------------------------------------------------------------------
Tue Dec 28 22:50:11 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.34

-------------------------------------------------------------------
Sat Dec 25 09:39:49 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.33

-------------------------------------------------------------------
Wed Dec  1 00:09:05 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.32

-------------------------------------------------------------------
Fri Nov 26 22:28:35 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.30

-------------------------------------------------------------------
Mon Nov  8 20:13:35 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.29

-------------------------------------------------------------------
Tue Sep  7 15:43:48 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.28

-------------------------------------------------------------------
Fri Sep  3 22:46:08 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.27

-------------------------------------------------------------------
Tue Aug 31 16:06:54 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.26

-------------------------------------------------------------------
Sat Aug 14 22:02:57 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.23

-------------------------------------------------------------------
Thu Aug  5 15:06:27 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.22

-------------------------------------------------------------------
Wed Jul 28 15:25:43 UTC 2010 - walter.fey@web.de

- update to version 3.20.21

-------------------------------------------------------------------
Sun Jul  4 20:44:21 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.19

-------------------------------------------------------------------
Tue Jun 29 21:43:31 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.18

-------------------------------------------------------------------
Tue Jun 22 15:39:14 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.17

-------------------------------------------------------------------
Wed Jun 16 13:12:44 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.16

-------------------------------------------------------------------
Sun Jun 13 11:37:37 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.15

-------------------------------------------------------------------
Mon Jun  7 14:14:04 UTC 2010 - dl8fcl@darc.de

- update to version 3.20.13
-------------------------------------------------------------------
* Wed May 19 2010 - dl8fcl@darc.de
- update to version 3.20.12
* Mon May 3 2010 - dl8fcl@darc.de
- update to version 3.20.11
* Sun Nov 08 2009 - dl8fcl@darc.de
- update to version 3.12.5
* Mon Aug 17 2009 - dl8fcl@darc.de
- update to version 3.12.4
* Thu Jul 30 2009 - dl8fcl@darc.de
- update to version 3.12.3
* Fri Jul 24 2009 - dl8fcl@darc.de
- update to version 3.12
* Wed Jul 8 2009 - dl8fcl@darc.de
- update to version 3.11.6
* Sun Jun 14 2009 - dl8fcl@darc.de
- update to version 3.11.5
* Sun May 10 2009 - dl8fcl@darc.de
- update to version 3.11.4
* Tue May 5 2009 - dl8fcl@darc.de
- update to version 3.11.3
* Wed Apr 22 2009 - dl8fcl@darc.de
- update to version 3.11.1
* Wed Apr 15 2009 - dl8fcl@darc.de
- update to version 3.11
* Sat Jan 17 2009 - dl8fcl@darc.de
- update to version 3.10
* Thu Sep 15 2008 - dl8fcl@darc.de
- updated to version 3.03
* Thu Aug 26 2008 - dl8fcl@darc.de
- updated to version 3.02
* Thu Aug 24 2008 - dl8fcl@darc.de
- updated to version 3.01
* Wed Aug 16 2008 - dl8fcl@darc.de
- updated to version 3.0
* Wed Jun 4 2008 - dg7gt@online.de
- updated to version 2.10.3
* Sun Mar 18 2007 - dl9pf@gmx.de
- import into buildservice

Places

File fldigi.changes of Package fldigi (Revision 698390318cbd4381a5232b6e47f4737c)

Places