Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
openSUSE:Backports:SLE-15-SP4:FactoryCandidates
flake-pilot
flake-pilot.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File flake-pilot.changes of Package flake-pilot
------------------------------------------------------------------- Wed Apr 10 12:13:56 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Turn terminal flag setup into function ------------------------------------------------------------------- Wed Apr 10 09:54:28 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.11 → 3.0.12 ------------------------------------------------------------------- Tue Apr 09 18:43:42 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix race condition on connection check ------------------------------------------------------------------- Tue Apr 09 16:53:26 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - set PS1 prompt via sci env ------------------------------------------------------------------- Tue Apr 09 16:41:34 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add terminal settings for pty stdout in sci disable ECHO ------------------------------------------------------------------- Tue Apr 09 12:35:08 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix invalid early exit condition ------------------------------------------------------------------- Mon Apr 08 12:59:48 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.10 → 3.0.11 ------------------------------------------------------------------- Mon Apr 08 12:58:58 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix build for Leap Issues on the gcc side for static targets, disable sci static build for older targets, e.g Leap ------------------------------------------------------------------- Wed Apr 03 22:48:44 CEST 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Prevent use of socat in firecracker-pilot Do not shell out socat and use proper UnixListener/UnixStream to do this job. This version of the commit works but I stumbled across a few issues: 1. Permission denied when the UnixListener runs as user and the firecracker process was called as root (run_as: root in the flake). The former implementation ran socat via sudo in the same way as the firecracker process. Thus if you register the flake to run as root it can now also only be called as root, which is acceptable. 2. The behavior in interactive sessions differs compared to socat. When sci in the guest is called it creates a pty and all data is copied to the vsock stream. The host connects via an UDS socket to this data and we multiplex stdin->stream and stream->stdout. When doing this with socat the behavior is different in a way that e.g tabs are effectively interpreted and the pty prompt allows for input on the same line when my code now always needs a newline to renew the prompt. I did not debug further what is needed to make this look nicer. This Fixes #8 ------------------------------------------------------------------- Wed Mar 27 14:11:25 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.9 → 3.0.10 ------------------------------------------------------------------- Wed Mar 27 14:04:40 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Clippy fixes ------------------------------------------------------------------- Wed Mar 27 13:57:50 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - sudo is required ------------------------------------------------------------------- Wed Mar 27 13:53:39 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix error handling Make sure the real command that is called through sudo is displayed. Also fix that the runas information is really used ------------------------------------------------------------------- Wed Mar 27 11:05:47 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Exit on remove if there is an error The remove sequence when used with --container or --vm deregisters all apps associated with the container or VM first. If there is an error on this deregistration, exit early and do not try to delete the container/vm ------------------------------------------------------------------- Mon Mar 25 12:10:45 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update URL in spec file Point to OSInside Organisation ------------------------------------------------------------------- Mon Mar 25 11:58:55 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.8 → 3.0.9 ------------------------------------------------------------------- Mon Mar 25 11:45:44 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix spec file Several changes according to the SUSE regulations ------------------------------------------------------------------- Mon Mar 25 11:04:41 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix robot tests ------------------------------------------------------------------- Mon Mar 25 10:40:16 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add missing %changelog line in spec ------------------------------------------------------------------- Mon Mar 25 10:26:49 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Allow non static sci Build sci non static for ppc64le which doesn't support the rust static target yet ------------------------------------------------------------------- Mon Mar 25 09:45:27 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Drop upx binary compression Startup time seems more important than binary size on target. The original reason for the compression was due to very limited size constraints from a former customer who no longer sticks to them. ------------------------------------------------------------------- Mon Mar 25 09:28:22 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Drop obsolete gcc static fix ------------------------------------------------------------------- Mon Mar 25 09:16:38 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Break long commandline for better readability ------------------------------------------------------------------- Mon Mar 25 09:13:53 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update documentation Added a delta container example registration ------------------------------------------------------------------- Mon Jan 29 15:47:26 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.7 → 3.0.8 ------------------------------------------------------------------- Fri Jan 26 21:52:07 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Drop build-deb support Building a debian package from a given oci container using the debbuild tool was an extra helper command to turn a container into a package. However, flake-pilot should not have this responsibility and if it should provide it, it should be done with the native tools from the respective distribution. ------------------------------------------------------------------- Fri Jan 26 12:56:56 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update README Add information about console settings and limitations with regards to firecracker VMs ------------------------------------------------------------------- Fri Jan 26 12:23:49 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add support for force vsock on firecracker pilot The vsock communication between guest and host was established with the firecracker pilot only for resume type registrations. For those it's required because you cannot mux one serial terminal between parallel applications running at the same time in the guest. So in resume mode each call has its own socket and channels. However, there is no reason to not also support that type of data flow between guest and host for one time calls which fires up the VM, starts the application and shuts down the VM. This commit adds support for forcing the vsock communication also for the simple app registration. The default stays on serial though. ------------------------------------------------------------------- Fri Jan 19 17:42:42 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.6 → 3.0.7 ------------------------------------------------------------------- Fri Jan 19 17:29:14 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Make sure /mnt mountpoint exists for firecracker When using an overlay sci mounts the new root to /mnt prior pivot. Thus make sure /mnt exists as mountpoint directory in the image at import time ------------------------------------------------------------------- Wed Jan 17 10:58:24 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.5 → 3.0.6 ------------------------------------------------------------------- Wed Jan 17 10:37:34 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Use raw channel fallback if pty setup failed In resume mode the firecracker pilot uses a vsock connection for the host <-> guest data transfer. On the guest the command is by default called in a new PTY. However if this is not possible e.g because the guest does not support pty allocation there should be a fallback allocating the standard channels directly. ------------------------------------------------------------------- Wed Jan 17 09:34:24 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update documentation Don't use static arch names ------------------------------------------------------------------- Mon Jan 15 18:59:51 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.4 → 3.0.5 ------------------------------------------------------------------- Mon Jan 15 18:36:51 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Make sure system mount point exists for sci Reboot, terminal allocation and pivot of a firecracker machine requires access to sysrq, pts devices and more. sci mounts all kernel filesystems but this requires the mountpoints /proc, /sys /dev, /dev/pts to be available. Some prebuild firecracker images comes without these mountpoints (non FHS compliant btw). With this commit we make sure that at registration time the image has this mountpoint such that the sci issued system mounts can succeed. ------------------------------------------------------------------- Tue Jan 09 21:44:59 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Complement copyright holder ------------------------------------------------------------------- Tue Jan 09 21:36:39 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Updates due to move from master to main Update workflows and documentation to match the branch move ------------------------------------------------------------------- Tue Jan 09 11:22:56 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.3 → 3.0.4 ------------------------------------------------------------------- Wed Jan 03 13:15:12 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update documentation Add more details on the main idea of this version of flake-pilot and provide a diagram to illustrate the use cases better ------------------------------------------------------------------- Tue Jan 02 19:38:08 CET 2024 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update compilation git action Run compile step in the same way as it's done when compiling the package, e.g sci as static binary ------------------------------------------------------------------- Sun Dec 31 18:38:28 CET 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Prevent use of socat in sci Replace external socat call in sci with rust implementation based on the pty, libc and vsock crates. This Fixes #8 ------------------------------------------------------------------- Sun Dec 31 14:39:06 CET 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix workspace resolver Edition 2021 is used in several src setup which implies workspace resolver version 2. Make this a permanent setting and don't let it assume an implicit resolver version ------------------------------------------------------------------- Mon Nov 13 10:36:32 CET 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.2 → 3.0.3 ------------------------------------------------------------------- Mon Nov 13 10:36:14 CET 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix package build ------------------------------------------------------------------- Mon Nov 13 09:24:04 CET 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.1 → 3.0.2 ------------------------------------------------------------------- Fri Nov 10 19:51:19 CET 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - make shellcheck happy ------------------------------------------------------------------- Fri Nov 10 16:40:40 CET 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add bash completion Add completion for flake-ctl. This Fixes #18 ------------------------------------------------------------------- Sat Oct 28 18:19:31 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Revert "Delete kiwi-settings from build requires" This reverts commit e5b8b146344cc1cf6736c51b2584031f80dbf6ba. ------------------------------------------------------------------- Sat Oct 28 18:15:56 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Delete kiwi-settings from build requires ------------------------------------------------------------------- Tue Oct 24 16:53:18 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixup documentation Fix URL references ------------------------------------------------------------------- Mon Oct 23 12:18:25 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed clippy warning call of unwrap after checking its variant with is_some() ------------------------------------------------------------------- Mon Oct 23 12:02:06 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update documentation Fix changed URL to example image ------------------------------------------------------------------- Wed Oct 11 08:09:23 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update documentation Package location has changed ------------------------------------------------------------------- Sat Oct 07 21:49:45 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Force cleanup of resume type flakes In case a resume type flake has lost its cid metadata which can happen on e.g powerfail, the resume of the instance should cleanup the left over container instance and start from scratch. This Fixes #23 ------------------------------------------------------------------- Sat Oct 07 21:46:05 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Make sure perform() reports all execution data The perform function only included the caller arguments but did not provide stdour/stderr information in case of an unsuccessful invocation of the command ------------------------------------------------------------------- Sat Oct 07 13:47:09 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update gcc static-pie workaround Apply for gcc-12 ------------------------------------------------------------------- Thu Sep 14 14:58:29 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Document contents of /etc/flakes Documentation for the system wide config file. This Fixes #17 ------------------------------------------------------------------- Thu Sep 14 14:36:38 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 3.0.0 → 3.0.1 ------------------------------------------------------------------- Thu Sep 14 14:05:54 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Consolidate common code to IO mod ------------------------------------------------------------------- Thu Sep 14 12:09:06 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add support for --include-path on all pilots Allow to provision files/directories. So far only tar archives could be used to provision arbitrary data to the instance ------------------------------------------------------------------- Wed Sep 13 16:28:36 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Make clippy happy on sci ------------------------------------------------------------------- Wed Sep 13 15:35:57 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Don't mix tests with implementation A matter of taste, but I value test code to be separated from the actual implementation code ------------------------------------------------------------------- Mon Sep 04 09:10:49 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.26 → 3.0.0 ------------------------------------------------------------------- Sat Sep 02 23:00:22 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added support for systemwide flake config Let podman and firecracker pilots read /etc/flakes.yml if present to allow configuration of several general settings. Proper defaults are encoded in case no data is provided ------------------------------------------------------------------- Thu Aug 31 23:10:33 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.25 → 2.2.26 ------------------------------------------------------------------- Thu Aug 31 22:57:58 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed firecracker serde schema Allowed values for cache_type are Writeback and Unsafe ------------------------------------------------------------------- Thu Aug 31 17:09:39 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.24 → 2.2.25 ------------------------------------------------------------------- Thu Aug 31 16:46:27 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed firecracker provision Check if overlay size is requested not only at creation time of the overlay filesystem image but also at usage time ------------------------------------------------------------------- Thu Aug 31 14:04:08 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Delete meta authors information The authors information at this point was used in the cli interface and printed on the console in the usage information. Exposing this information might be unwanted and the information is also printed in a not well formatted way. ------------------------------------------------------------------- Thu Aug 31 11:37:01 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.23 → 2.2.24 ------------------------------------------------------------------- Thu Aug 31 11:17:19 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixup clippy warnings ------------------------------------------------------------------- Wed Aug 30 22:22:02 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Cleanup code Removed out of scope and unused poc code Fixed bumpversion setup to handle all Cargo.toml files Update Makefile for better target readability Fixed Cargo files to follow the major.minor dependency policy Fixed spec file due to removal of unused poc code ------------------------------------------------------------------- Wed Aug 30 09:41:05 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Move is_debug to common lib Along with the change update podman and firecracker pilots to make use of is_debug from the common space and print debug messages through the debug! macro. The former double formatting of the debug message broke the output display In addition to the debug changes also a method do_trace() was added to create trace reports. However, the method is currently not in use as I'm still looking for a way to create a useful trace report without spreading do_trace() over the code ------------------------------------------------------------------- Tue Aug 29 22:36:16 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Better error message for fs::read_dir Added FlakeError for this condition. Related to Issue #9 ------------------------------------------------------------------- Tue Aug 29 18:14:15 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.22 → 2.2.23 ------------------------------------------------------------------- Tue Aug 29 16:55:58 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Improve error handling for firecracker Ported upstream patches from Michael Meyer <mijomeyer@t-online.de> ------------------------------------------------------------------- Tue Aug 29 16:20:05 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Refactor error handling for command execution Apply Upstream patch from Michael Meyer <mijomeyer@t-online.de> which consolidates further methods mkdir and chmod in the common space and also moves error handling out of the podman pilot into the common space ------------------------------------------------------------------- Tue Aug 29 10:22:18 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.21 → 2.2.22 ------------------------------------------------------------------- Mon Aug 28 23:07:54 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add support for %silent pilot option Allow to switch off the progress spinner for the podman and firecracker pilots ------------------------------------------------------------------- Mon Aug 28 22:46:15 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Refactor pilot options handling Add methods to read pilot options into the common space and adapt firecracker and podman pilots to make use of them ------------------------------------------------------------------- Mon Aug 28 17:17:49 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - podman-pilot cleanup changes Upstream patch from Michael Meyer <mijomeyer@t-online.de> which shortens some code parts. ------------------------------------------------------------------- Mon Aug 28 17:02:23 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.20 → 2.2.21 ------------------------------------------------------------------- Mon Aug 28 16:31:04 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Firecracker sanity check The firecracker startup procedure in resume mode needs to setup the control channels prior launching the actual firecracker program to allow synchronisation of guest vs. host data flow. If there is no check that the firecracker binary exists we still perform all the pre setup and waiting calls and the actual error condition is only visible in debug mode. Therefore an early exit condition that checks if there is a firecracker binary found on the host improves the user experience. This Fixes #129 ------------------------------------------------------------------- Mon Aug 28 16:23:54 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Move errors to the common space Allow error handling to be used on all pilots and utils ------------------------------------------------------------------- Mon Aug 28 12:40:47 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add static profile for building sci binary ------------------------------------------------------------------- Mon Aug 28 12:24:50 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix cargo setup Move profiles to the toplevel Fix contributors list and mail addresses Fix use of unused manifest key crate-type ------------------------------------------------------------------- Mon Aug 28 11:50:09 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix package build Source files from new common subdirectory were not added to the source tarball. Thus the compile stage failed ------------------------------------------------------------------- Mon Aug 28 11:43:02 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Consolidate actions workload files consistent naming, the same version of actions, no missing line endings ------------------------------------------------------------------- Mon Aug 28 11:34:48 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.19 → 2.2.20 ------------------------------------------------------------------- Fri Aug 25 09:33:45 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - Extract common code Start to refactor pilot code that is shared across multiple implementations into a common ground. The commit here adds a common way to handle sudo based command calls properly ------------------------------------------------------------------- Wed Aug 23 12:20:35 CEST 2023 - Michael Meyer <ichmed95@gmail.com> - Add logging for easier debugging ------------------------------------------------------------------- Tue Aug 22 23:18:01 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Refactor port allocation for UDS socket When using the firecracker-pilot in a resume type flake, the pilot creates a UDS socket for listening on data. Each of this socket connections requires a free port. The former implementation selects the socket by a random number within a given range. However, this is not a stable solution and the risk to select an already occupied port is high. This commit refactors the port allocation to FIRECRACKER_VSOCK_PORT_START + the PID of the pilot process. In addition the commit adds to allow to read runtime options which are only meant to be used for the pilot and should not interfere with the standard arguments passed along to the command call. For this purpose we deviate from the standard Unix/Linux commandline format and treat options passed as %name:value to be a pilot option. This commit adds the handling of the followng pilot option: %port:number Allows to specify a custom UDS port used for the VSOCK based communication channel in a firecracker flake configured for resume mode This Fixes #114 ------------------------------------------------------------------- Tue Aug 22 13:46:39 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - Use serde to read config in firecracker-pilot Move firecracker to serde ------------------------------------------------------------------- Mon Aug 21 16:32:50 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - Reduce source tarball size Remove unneeded files and hollow out all windows and wasm dependencie ------------------------------------------------------------------- Sat Aug 19 13:56:50 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - Add integration testing based on the robot framework Implement a first collection of flake-ctl and engine tests to run as a github action. The implementation of the test uses the python based robot framework. The test matrix is expected to grow ------------------------------------------------------------------- Thu Aug 17 11:47:58 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.18 → 2.2.19 ------------------------------------------------------------------- Thu Aug 17 11:44:45 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - Use one top level Cargo definition Updated the Makefile and the .spec file to fit the new structure with a top level Cargo.toml This also reduces the package size by combining the vendored dependencies ------------------------------------------------------------------- Mon Aug 14 21:42:16 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.17 → 2.2.18 ------------------------------------------------------------------- Mon Aug 14 21:38:39 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Revert "Makefile Fix" This reverts commit bebffd4f421b98c2d78e4d4117c4ae92fa135912. The package build was broken due to this commit and needs to be reverted. The original intend to consolidate the compilation into a more rust like structure is a good change but it needs to be done without breaking the existing package build. ------------------------------------------------------------------- Mon Aug 14 21:38:23 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Revert "Fix man path" This reverts commit ef7733f78019d89276ee05f00d647dab9c790139. ------------------------------------------------------------------- Mon Aug 14 11:52:04 CEST 2023 - Michael Meyer <ichmed95@gmail.com> - Fix man path ------------------------------------------------------------------- Mon Aug 14 11:48:56 CEST 2023 - Michael Meyer <ichmed95@gmail.com> - Update .gitignore ------------------------------------------------------------------- Fri Aug 11 18:09:41 CEST 2023 - Michael Meyer <ichmed95@gmail.com> - Makefile Fix ------------------------------------------------------------------- Fri Aug 11 15:27:48 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - Flake ctl exit with a correct return code Add failure returncodes and use them depending on the success/failed state of the action Co-authored-by: Michael Meyer <ichmed95@gmail.com> ------------------------------------------------------------------- Fri Aug 11 15:23:08 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - Refactor error handling Created error types and replace all panics, unwraps and exits with errors Co-authored-by: Michael Meyer <ichmed95@gmail.com> ------------------------------------------------------------------- Fri Aug 11 13:56:15 CEST 2023 - Michael Meyer <ichmed95@gmail.com> - Moved spinners to stderr ------------------------------------------------------------------- Mon Aug 07 13:29:10 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Keep comment format consistent Maybe nitpick but I think consistency makes things easier. I only adapted the comment block for this place in code as it was mine before. There are other places which I did not touch since I don't want to step on other peoples toes, but I recommend that we decide for one comment format and stick to it everywhere ------------------------------------------------------------------- Mon Aug 07 13:19:15 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - podman-pilot: replace adhoc yaml with serde Use serde to read and validate the flake setup when calling podman-pilot. This is related to #128 Co-authored-by: Michael Meyer <ichmed95@gmail.com> ------------------------------------------------------------------- Wed Jul 26 18:07:59 CEST 2023 - Michael Meyer <ichmed95@gmail.com> - match clippy action to othes ------------------------------------------------------------------- Fri Jul 14 11:00:30 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.16 → 2.2.17 ------------------------------------------------------------------- Fri Jul 14 10:52:16 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Regression and partial revert from the clippy set The changes done to make clippy happy also changed the logic of the code at several places. This was exactly the reason why I wanted small reviewable pull requests. The commit here is a partial revert of the code prior the big clippy changes. The reason for the changes here is because the template data was was no longer imported and also options given on the commandline were no longer added to the flake yaml file. I reverted to the version before clippy and manually fixed all clippy issues while testing the code to be still functional. This is the result commit of this action. ------------------------------------------------------------------- Fri Jul 14 10:51:32 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update flake-ctl man page The page was missing that we now also support firecracker ------------------------------------------------------------------- Sun Jul 09 00:43:48 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Use rst2man instead of pandoc to render man pages pandoc is pretty big and adds a lot of haskel lib requirements rst2man just requires python3-docutils and is more lightweight ------------------------------------------------------------------- Sun Jul 09 00:23:56 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Better sanity check for gcc static fix ------------------------------------------------------------------- Sat Jul 08 00:38:19 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.15 → 2.2.16 ------------------------------------------------------------------- Sat Jul 08 00:36:56 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed broken reading of resume config The clippy change introduced a regression on reading the resume option from the command. I guess a cut&paste bug ------------------------------------------------------------------- Fri Jul 07 23:27:37 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed Makefile clean target make sure no stale Cargo.lock files will be packaged on make package ------------------------------------------------------------------- Fri Jul 07 20:57:31 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.14 → 2.2.15 ------------------------------------------------------------------- Fri Jul 07 20:56:48 CEST 2023 - Michael Meyer <mijomeyer@t-online.de> - Fixes to the code to make clippy happy Added linter checks via clippy and simplify the code at several places. Also activate a github action for automated checking ------------------------------------------------------------------- Fri Jul 07 14:47:37 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Clarify on license Add missing license information to update_changelog.py license is MIT in alignment with the overall flake-pilot license. The license setting is in agreement with the only copyright holder of the software which is the person of this signed commit. This Fixes #125 ------------------------------------------------------------------- Wed Jul 05 09:58:53 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.13 → 2.2.14 ------------------------------------------------------------------- Wed Jul 05 09:52:26 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Rename oci-registry -> flake-registry For consistency reasons, all tools are named flake-XX and oci-registry is not only used for storing container images but also firecracker VMs ------------------------------------------------------------------- Wed Jul 05 08:46:15 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.12 → 2.2.13 ------------------------------------------------------------------- Wed Jul 05 08:45:17 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Better error message for seek os-error ------------------------------------------------------------------- Tue Jul 04 22:36:13 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.11 → 2.2.12 ------------------------------------------------------------------- Tue Jul 04 22:35:35 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Create flake tmp for new registries ------------------------------------------------------------------- Tue Jul 04 13:11:33 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.10 → 2.2.11 ------------------------------------------------------------------- Tue Jul 04 13:10:17 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Handle potential error on seek/write The unconditional unwrap here is evil since it only reports unwrap on a null value of either seek() or write() fails. The real error message e.g "no space left" is hidden in this case ------------------------------------------------------------------- Mon Jul 03 16:59:30 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.9 → 2.2.10 ------------------------------------------------------------------- Mon Jul 03 16:59:01 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Make sure to create flakes tmp with permissions ------------------------------------------------------------------- Mon Jul 03 16:22:27 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.8 → 2.2.9 ------------------------------------------------------------------- Mon Jul 03 16:21:57 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed dir creation Make sure to create the entire path ------------------------------------------------------------------- Mon Jul 03 15:21:04 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.7 → 2.2.8 ------------------------------------------------------------------- Mon Jul 03 12:42:23 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Increase max retries on resume type VM When connecting to a resume type VM for the first time, the wait time was not long enough. Increasing the retry count will solve this issue. If after this delay the VM is still not responsive on the vsock it's likely an issue on the VM startup itself and ok to close. This Fixes #122 ------------------------------------------------------------------- Sun Jul 02 18:39:29 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix sync output in case of an error In case tar fails it prints relevant data to stderr. This information should be part of the debug output when calling with PILOT_DEBUG=1 ------------------------------------------------------------------- Sat Jul 01 23:43:15 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Move flake metadata dir to persistent location flakes metadata was written to /tmp, but this is a non persistent storage area (tmpfs). For resume type instances it is required to keep the information to allow resume a stopped container. This Fixes #119 ------------------------------------------------------------------- Fri Jun 30 17:26:57 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add firecracker include provisioning This commit implements reading of the flake include section for the firecracker pilot. With the include tar support it's possible to provision any arbitrary data into the VM instance prior launch. For firecracker the include feature requires the use of an overlay. This Fixes #95 ------------------------------------------------------------------- Thu Jun 29 15:00:28 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.6 → 2.2.7 ------------------------------------------------------------------- Thu Jun 29 14:28:01 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Don't apply gcc static fix on TW ------------------------------------------------------------------- Thu Jun 29 12:52:11 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Disable loop feature in sys_mount By default sys_mount supports loop devices. In sci we don't use them and for kernel 6.x the code does not compiled anymore and fails with: enum_(unnamed_at_/usr/include/linux/loop_h_16_1)" is not a valid Ident ------------------------------------------------------------------- Tue Jun 27 18:22:11 CEST 2023 - Bo Maryniuk <bo@maryniuk.net> - Add flake-ctl and podman-pilot licenses ------------------------------------------------------------------- Tue Jun 27 18:09:28 CEST 2023 - Bo Maryniuk <bo@maryniuk.net> - Run SPDX sboms and list all vendor tree dependencies licenses ------------------------------------------------------------------- Tue Jun 27 18:08:52 CEST 2023 - Bo Maryniuk <bo@maryniuk.net> - Add MIT licenses to the sub-packages ------------------------------------------------------------------- Mon Jun 26 16:37:08 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.5 → 2.2.6 ------------------------------------------------------------------- Sat Jun 24 22:33:30 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed sci command quoting in resume mode In resume mode sci calls commands through a vsock using socat EXEC. This commit makes sure that the quoting of the command string doesn't get lost and becomes effective at socket connection time. This Fixes #113 ------------------------------------------------------------------- Thu Jun 22 20:32:41 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.4 → 2.2.5 ------------------------------------------------------------------- Thu Jun 22 20:32:25 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added socat requirement ------------------------------------------------------------------- Thu Jun 22 18:38:05 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.3 → 2.2.4 ------------------------------------------------------------------- Tue Jun 20 22:58:15 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Refactor sci and support resume mode The former implementation used the vsock channel to read the command, call it in a child and send the output back through the vsock channel. This works until the command is not interactive. With this refactor I propose a different way to handle the command execution. start vsock listener on VM_PORT, wait for command(s) in a loop A received command turns into an socat process calling the command with an expected listener Example: sudo socat UNIX-CONNECT:/run/sci_cmd_XXX.sock - CONNECT defaults::VM_PORT(52) --> send the command to call and quit sudo socat VSOCK-CONNECT:2:exec_port EXEC:cmd --> connects to the listener instance on the host (pilot) The above procedure got also implemeted as part of the firecracker-pilot resume code. This Fixes #87 ------------------------------------------------------------------- Tue Jun 20 15:56:31 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added instance resume process to firecracker pilot When using a firecracker instance in resume mode the first call has to run firecracker in the background, open a connection to the vsock and send the command. Any subsequent call only sends commands to the existing instance. If the instance gets deleted the pilot has to check if the VM is still there and behave properly. Meaning vmid (PID) and uds socket file must be cleaned up prior launching a new instance. The commit here implements the processing of this workflow. It does not implement the actual connection to the instance and sending of commands. This will follow. As of now only debug messages telling what should happen are printed. This is related to Issue #87 ------------------------------------------------------------------- Mon Jun 19 15:25:24 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Change name of UDS socket for vsock communication The name of the uds socket was set to /run/sci_cmd_PID.sock The used PID was the firecracker process ID. This name doesn't make much sense because for one command registration there will always be only one dedicated firecracker process instance assigned. For the use case of --resume there can be multiple connections through the same uds socket ------------------------------------------------------------------- Mon Jun 19 14:29:35 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add resume support to firecracker app registration Write sci_resume=1 to the boot cmdline arguments if --resume is set at app registration for the firecracker pilot. This is related to Issue #87 ------------------------------------------------------------------- Sun Jun 18 22:28:51 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.2 → 2.2.3 ------------------------------------------------------------------- Sun Jun 18 22:25:32 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed loading of vsock transport Within the guest the vsock virtio transport module must be loaded, not the vhost module ------------------------------------------------------------------- Fri Jun 16 18:11:59 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Cleanup sci on style and consistency Use a constant for the guest CID, properly pass the ok status in case of an error, reduce code duplication ------------------------------------------------------------------- Fri Jun 16 16:44:50 CEST 2023 - Marcin Katulski <marcin.katulski@gmail.com> - VSock communication on firecracker side in sci (#106) * VSock communication on firecracker side in sci * Fix the resume variable name * Fixes after review * Fixes after found bug * Removal of unnessecary debug log * Removing unnessecary counter ------------------------------------------------------------------- Thu Jun 15 15:22:02 CEST 2023 - Marcin Katulski <marcin.katulski@gmail.com> - FIX for wrongly handled CID in json configuration The CID in VM shall always be equall 3 as the connection generated by firecracker is vsock less connection, means static cid bound on vm to the unix domain socket bound on host ------------------------------------------------------------------- Fri Jun 09 09:05:19 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add firecracker vsock at instance startup (#105) This commit adds the init code to create a vsock per instance. This is related to Issue #87 ------------------------------------------------------------------- Thu May 25 15:37:05 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix project link ------------------------------------------------------------------- Thu May 25 15:34:35 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - update README ------------------------------------------------------------------- Thu May 25 15:33:32 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update README ------------------------------------------------------------------- Thu May 25 15:29:05 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update README ------------------------------------------------------------------- Wed May 24 17:08:43 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.1 → 2.2.2 ------------------------------------------------------------------- Wed May 24 17:07:56 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix vm and container purge If used together it's required to sanity check in the different template types between vm and containers ------------------------------------------------------------------- Tue May 23 16:36:50 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.2.0 → 2.2.1 ------------------------------------------------------------------- Tue May 23 12:25:31 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed setup of firecracker registry layout For firecracker the layout looks like the following: /var/lib/firecracker/ ├── images └── storage The code in flake-ctl setting it up only cared for the images subdirectory and did not allow /var/lib/firecracker to be a symlink location ------------------------------------------------------------------- Mon May 22 16:04:04 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.14 → 2.2.0 ------------------------------------------------------------------- Sun May 21 15:42:31 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update README ------------------------------------------------------------------- Sun May 21 15:21:15 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Allow to disable networking at registration time ------------------------------------------------------------------- Sun May 21 14:31:50 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update man page ------------------------------------------------------------------- Sat May 20 18:56:59 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Create overlayroot mount point on pull As the rootfs is used read-only in firecracker the overlayroot mountpoint cannot be created in sci ------------------------------------------------------------------- Fri May 19 15:52:05 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Make sure to create /overlayroot When using arbitrary rootfs images it might happen that there is no /overlayroot mountpoint which we use in the pilot to setup an overlay. In addition search for tools like switch_root in the former location /sbin to stay backward compatible with linux versions prior the /usr/sbin move. Newer linux versions still maintains symlinks from /sbin to /usr/sbin for compat reasons. ------------------------------------------------------------------- Fri May 19 09:53:55 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Package sci also in pilot Usually sci is provided as guestvm tool and the package gets installed as part of the rootfs building. But we also want to support adding sci to rootfs images which doesn't provide it. Therefore also provide sci in the pilot package that gets installed on the host ------------------------------------------------------------------- Thu May 18 10:59:32 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Support pulling image from components So far pulling a firecracker image was limited to the KIWI kis image type. With this commit it's also possible to pull an image from it's components; rootfs, kernel and optional initrd. This allows for example to make use of the firecracker hosted CI images or any other rootfs image in combination with some kernel/initrd. During the pull of such an image there is also a check for the sci binary inside of the rootfs. If it does not exist it gets added to the rootfs such that the firecracker-pilot can work with it. This Fixes #99 ------------------------------------------------------------------- Wed May 17 17:34:34 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add network configuration guide Those parts of the network setup for firecracker instances that cannot be done in code (or out of scope for this project) are documented with this commit as one possible example This Fixes #76 ------------------------------------------------------------------- Wed May 17 11:55:33 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Build sci as static binary This would allow to incorporate it into any arbitrary rootfs ------------------------------------------------------------------- Tue May 16 18:00:54 CEST 2023 - Andre Barthel <barthel_a@web.de> - Revision of the sci man page ------------------------------------------------------------------- Tue May 16 16:53:11 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.13 → 2.1.14 ------------------------------------------------------------------- Tue May 16 10:28:17 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed off by one in byte_size for sparse size ------------------------------------------------------------------- Tue May 16 09:23:22 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update flake-ctl firecracker register man page Update suffix format for size values ------------------------------------------------------------------- Mon May 15 17:00:16 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Addded man page for sci guest utility sci is used in combination with the firecracker engine and allows to execute the registered application inside of the guest VM. It also takes over responsiblity to setup an eventual overlay as well as perform the shutdown of the VM after the command execution. Further versions of sci will also implement the vsoc communication channels between host and guest. This commit adds a first version of the man page to describe sci in more detail. ------------------------------------------------------------------- Mon May 15 16:54:26 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Get rid of qemu tools to create sparse file Use native methods to create a sparse overlay file ------------------------------------------------------------------- Mon May 15 15:26:18 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added dracut-netstart package for firecracker The new package flake-pilot-firecracker-dracut-netstart supports users with building firecracker images that supports networking using systemd-networkd and systemd-resolved activated and persistent inside of the initrd. This is related to Issue #76 ------------------------------------------------------------------- Sun May 14 21:54:50 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.12 → 2.1.13 ------------------------------------------------------------------- Sun May 14 21:54:29 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Create resolver link in sci ------------------------------------------------------------------- Sun May 14 19:03:59 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.11 → 2.1.12 ------------------------------------------------------------------- Sun May 14 19:02:08 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed sci filesystem propagation Make sure /run is used from the initrd if present and only if not create a fresh tmpfs mount. This is required to e.g hand over resolver information created in the initrd via systemd-resolved, but also other runtime data from the initrd should be available to the system if present ------------------------------------------------------------------- Sun May 14 14:24:18 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.10 → 2.1.11 ------------------------------------------------------------------- Sun May 14 14:23:01 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed handing of tap names make sure each instance uses its own tap name. ------------------------------------------------------------------- Sun May 14 11:27:03 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.9 → 2.1.10 ------------------------------------------------------------------- Sun May 14 11:22:53 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add default network setup Use initrd options rd.neednet=1 ip=dhcp to let systemd inside of the initrd know how to setup the network. This design requires the firecracker image to use an initrd and that initrd must use systemd (typically created by dracut) in order to process the above cmdline arguments. If this concept is not acceptable by the users use case (e.g no initrd wanted) then the user needs to provide its own network setup mechanics as part of the firecracker rootfs image and also need to find a way to activate it prior launching the application, e.g by using systemd instead of sci as the init process. ------------------------------------------------------------------- Sun May 14 11:03:55 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - don't panic in sci In case of an error report and reboot because otherwise the firecracker process blocks forever on the running console ------------------------------------------------------------------- Sun May 14 11:03:26 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Handle all boot args in the flake yaml ------------------------------------------------------------------- Sat May 13 20:41:14 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix indentation ------------------------------------------------------------------- Sat May 13 20:35:54 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix menu ------------------------------------------------------------------- Sat May 13 20:34:32 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add doc link to README ------------------------------------------------------------------- Sat May 13 20:31:52 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update README ------------------------------------------------------------------- Sat May 13 20:26:24 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update README ------------------------------------------------------------------- Sat May 13 19:05:04 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.8 → 2.1.9 ------------------------------------------------------------------- Sat May 13 18:42:08 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Do not compress sci binary When used without an initrd it's not possible for the kernel to run the binary if it was upx compressed. For further details also let sci print the user env in debug mode ------------------------------------------------------------------- Fri May 12 23:38:29 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.7 → 2.1.8 ------------------------------------------------------------------- Fri May 12 23:37:46 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix firecracker initrd_path serialization Make sure initrd_path is not written at all if empty ------------------------------------------------------------------- Fri May 12 23:06:22 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix build on ubuntu/debian ------------------------------------------------------------------- Fri May 12 22:28:50 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.6 → 2.1.7 ------------------------------------------------------------------- Fri May 12 22:28:33 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Handle wait result better ------------------------------------------------------------------- Fri May 12 22:28:18 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fix firecracker package requirements ------------------------------------------------------------------- Fri May 12 20:05:21 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.5 → 2.1.6 ------------------------------------------------------------------- Fri May 12 20:04:54 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed bumpversion config wrong path to guestvm tools for firecracker ------------------------------------------------------------------- Fri May 12 20:03:38 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add firecracker-pilot to bumpversion ------------------------------------------------------------------- Thu May 11 20:56:43 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed app registration Check if app path exist prior trying to register ------------------------------------------------------------------- Wed May 10 19:14:44 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add firecracker-pilot launcher The firecracker-pilot launcher binary will run the registered application through firecracker. This Fixes #86 ------------------------------------------------------------------- Thu May 04 16:47:49 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add flake-ctl firecracker register/remove Add app registration/removal for the firecracker engine This Fixes #84 ------------------------------------------------------------------- Thu May 04 14:50:21 CEST 2023 - Marcin Katulski <marcin.katulski@gmail.com> - firecracker-service manual page (#88) * firecracker-service manual page * Fixes after review * Fix after review adding man page to package ------------------------------------------------------------------- Thu May 04 13:33:57 CEST 2023 - Andre Barthel <Andre.Barthel@elektrobit.com> - .spec file fix ------------------------------------------------------------------- Wed May 03 09:56:04 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add compile step to CI workflow ------------------------------------------------------------------- Tue May 02 16:50:46 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added support for flake-ctl firecracker pull Added the pull command for the firecracker engine to download and register remote firecracker images into a local storage location below /var/lib/firecracker/images. This Fixes #83 ------------------------------------------------------------------- Tue May 02 16:50:06 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed podman specific man pages Some man pages still contains non engine specific section names ------------------------------------------------------------------- Thu Apr 27 15:27:24 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add firecracker guest VM tools package Add flake-pilot-firecracker-guestvm-tools sub-package providing tools needed inside of the firecracker VM image to help implementing the application launcher workflow ------------------------------------------------------------------- Thu Apr 27 12:22:45 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Use an extra cmdline argument to handle the call To avoid conflicts with other code reading proc/cmdline it is more stable to introduce our own run=... argument and parse that in a shell like way. To do this the shell_words crate is used. ------------------------------------------------------------------- Thu Apr 27 09:02:54 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Maintain /overlayroot as package directory Create and maintain the /overlayroot mountpoint directory in the flake-pilot-firecracker package ------------------------------------------------------------------- Wed Apr 26 16:52:29 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed sci setup and command execution sci was a bit too picky on mounting proc, sys and run. If called from within an initrd it could happen that these mountpoints already exists. I turned this condition into a warning rather an error. Furthermore sci executes itself when the idea was that sci executes a given command. I refactored the code to allow calling a given command and also let the firecracker instance shut down after the command execution. The code also leaves two TODO code points which I'd like to fix later and together with the team ------------------------------------------------------------------- Wed Apr 26 13:00:45 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed use of static variables ------------------------------------------------------------------- Wed Apr 26 12:36:03 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Package firecracker service command interface sci is used as VM init tool to prepare the command execution environment, e.g overlay and actually call the given command ------------------------------------------------------------------- Wed Apr 26 11:04:45 CEST 2023 - Marcin Katulski <extern.marcin.katulski@elektrobit.com> - Correct the folder naming ------------------------------------------------------------------- Wed Apr 26 08:41:46 CEST 2023 - Marcin Katulski <extern.marcin.katulski@elektrobit.com> - Fixes after review ------------------------------------------------------------------- Fri Apr 21 22:22:54 CEST 2023 - Marcin Katulski <extern.marcin.katulski@elektrobit.com> - Newline at the end of bump version file ------------------------------------------------------------------- Fri Apr 21 22:22:05 CEST 2023 - Marcin Katulski <extern.marcin.katulski@elektrobit.com> - Update bump version for sci tool ------------------------------------------------------------------- Fri Apr 21 22:18:52 CEST 2023 - Marcin Katulski <extern.marcin.katulski@elektrobit.com> - SCI implementation Simple Command Init purpose is to mount proper system folders and the overlay fs if such has been configured and provided by the kernel boot arguments and start the Simple Command Executor ------------------------------------------------------------------- Fri Apr 21 09:38:04 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.4 → 2.1.5 ------------------------------------------------------------------- Fri Apr 21 08:11:48 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Refactor packaging (#73) Provide sub-packages flake-pilot-podman and flake-pilot-firecracker This Fixes #72 ------------------------------------------------------------------- Wed Apr 19 12:36:23 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.3 → 2.1.4 ------------------------------------------------------------------- Tue Apr 18 14:32:01 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fetch output channels when pulling In case of an error, panic including the error message. In any other case suppress the pull messages. In debug mode show the pull command for reproducibility ------------------------------------------------------------------- Tue Apr 18 12:00:40 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Log prune results in debug mode ------------------------------------------------------------------- Tue Apr 18 11:57:33 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Make sure prune errors are logged in debug mode ------------------------------------------------------------------- Tue Apr 18 11:53:31 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Handle error condition of podman image exists The call should actually never fail but if it does we should not continue ------------------------------------------------------------------- Mon Apr 17 15:58:40 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Make sure container layer get pulled in If using additional container layers, the launcher should make sure they get pulled if not yet done. ------------------------------------------------------------------- Fri Apr 14 14:54:58 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.2 → 2.1.3 ------------------------------------------------------------------- Fri Apr 14 14:54:13 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Use XFS for oci-registry ------------------------------------------------------------------- Fri Apr 14 08:16:05 CEST 2023 - Marcin Katulski <marcin.katulski@gmail.com> - Service communication implementation (#70) * Service communication implementation Protocol implementation with three base commands, register/unregister to store information about runnig vm's at the moment, ps to list running vm's * Cargo toml cleanup, removal of unused crates * Added missing newline at the end of lib.rs * Fixes after review --------- Co-authored-by: Marcin Katulski <extern.marcin.katulski@elektrobit.com> ------------------------------------------------------------------- Fri Apr 07 08:22:03 CEST 2023 - Marcin Katulski <marcin.katulski@gmail.com> - Initial commit with firecracker-service (#69) * Initial commit with firecracker-service Base skeleton for firecracker-service * Cleaned up names for stdout and stderr * Fixes after review --------- Co-authored-by: Marcin Katulski <extern.marcin.katulski@elektrobit.com> ------------------------------------------------------------------- Wed Apr 05 12:01:44 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.1 → 2.1.2 ------------------------------------------------------------------- Tue Apr 04 09:35:22 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add support for --info to podman register command If provided in the container the --info command will print the embedded default registration information. Along with the change some refactoring on the option handling as well as moving code engine specific vs. generic registration implementation. This Fixes #67 ------------------------------------------------------------------- Sat Apr 01 00:24:05 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update README ------------------------------------------------------------------- Sat Apr 01 00:23:17 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Update README ------------------------------------------------------------------- Fri Mar 31 23:35:10 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.1.0 → 2.1.1 ------------------------------------------------------------------- Fri Mar 31 23:23:48 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added shellcheck action ------------------------------------------------------------------- Fri Mar 31 23:18:08 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add oci-registry utility Create, activate and deactivate OCI read-write storage This Fixes #66 ------------------------------------------------------------------- Fri Mar 31 23:13:13 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Increase spinner scope ------------------------------------------------------------------- Thu Mar 30 21:45:12 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add spinner to feedback user on progress Add a spinner to show progress during provisioning This Fixes #59 ------------------------------------------------------------------- Thu Mar 30 21:07:22 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Suppress podman start output if detached Do not show the podman start output of the container gets started in detached mode. podman by default prints the container ID to stdout but podman-pilot already knows it and it's useless information for the user ------------------------------------------------------------------- Thu Mar 30 20:54:50 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Bump version: 2.0.5 → 2.1.0 ------------------------------------------------------------------- Thu Mar 30 20:54:34 CEST 2023 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixup bumpversion ------------------------------------------------------------------- Thu Mar 30 16:53:00 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fixed github workflow due to name change ------------------------------------------------------------------- Thu Mar 30 16:33:18 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add flake-pilot-rpmlintrc ------------------------------------------------------------------- Thu Mar 30 16:20:00 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Rename oci-pilot -> podman-pilot This Fixes #60 ------------------------------------------------------------------- Thu Mar 30 16:00:59 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Rename oci-ctl -> flake-ctl ------------------------------------------------------------------- Thu Mar 30 15:51:17 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update packaging due to name change ------------------------------------------------------------------- Thu Mar 30 15:38:42 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update manual pages due to name changes ------------------------------------------------------------------- Thu Mar 30 15:25:48 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Cleanup README to match name changes ------------------------------------------------------------------- Thu Mar 30 15:11:00 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Bump version: 2.0.4 → 2.0.5 ------------------------------------------------------------------- Thu Mar 30 15:10:50 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update README ------------------------------------------------------------------- Wed Mar 29 13:05:04 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add support for podman settings on the commandline Allow to specify podman runtime options as part of the flake registration. This Fixes #41 ------------------------------------------------------------------- Tue Mar 28 16:41:54 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add support for user setting on the commandline Allow to specify --run-as username as part of the flake registration. This Fixes #54 ------------------------------------------------------------------- Tue Mar 28 12:59:27 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update lock files due to version bump ------------------------------------------------------------------- Tue Mar 28 12:57:58 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Bump version: 2.0.3 → 2.0.4 ------------------------------------------------------------------- Tue Mar 28 12:57:35 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fix reading of flake directory ------------------------------------------------------------------- Mon Mar 27 22:20:58 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update lock files due to version bump ------------------------------------------------------------------- Mon Mar 27 22:18:38 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Bump version: 2.0.2 → 2.0.3 ------------------------------------------------------------------- Mon Mar 27 22:16:11 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update manual pages less duplication of information and update of new options ------------------------------------------------------------------- Mon Mar 27 22:15:37 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add support for includes on commandline Allow to specify --include-tar as part of the flake registration ------------------------------------------------------------------- Mon Mar 27 17:08:07 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add support for includes Allow to include custom tarball to provision container. This Fixes #52 ------------------------------------------------------------------- Mon Mar 27 15:49:44 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fixed build Make sure flake directory is created ------------------------------------------------------------------- Mon Mar 27 15:30:21 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Install flake templates to /etc/flakes ------------------------------------------------------------------- Mon Mar 27 15:26:09 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Follow symlinks to reach flake registry ------------------------------------------------------------------- Mon Mar 27 11:14:47 CEST 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fix README due to namespace changes ------------------------------------------------------------------- Mon Mar 27 10:52:15 CEST 2023 - jili8389 <jiyang.liu@elektrobit.com> - Add missing subcommands in examples ------------------------------------------------------------------- Fri Mar 24 12:52:54 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - cargo has updated the lock files ------------------------------------------------------------------- Fri Mar 24 12:48:10 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Bump version: 2.0.1 → 2.0.2 ------------------------------------------------------------------- Fri Mar 24 12:31:07 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update package spec Distinguish the flake template by a namespace ------------------------------------------------------------------- Fri Mar 24 12:25:30 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Refactor user interface Add a namespace to distinguish between runtime engines. The currently supported runtime engine is podman. This Fixes #44 ------------------------------------------------------------------- Fri Mar 24 10:50:46 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update pilot documentation ------------------------------------------------------------------- Fri Mar 24 10:41:58 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update oci-pilot due to flake format changes The container flake format got its own namespace. Follow the change in the pilot launcher ------------------------------------------------------------------- Fri Mar 24 09:49:33 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Refactor container flake file Provide flakes for a container engine inside of a container namespace ------------------------------------------------------------------- Thu Mar 23 15:49:28 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add commandline switches for attach/resume setting Allow to specify --attach or --resume setting at app registration. This Fixes #48 and Fixes #39 ------------------------------------------------------------------- Wed Mar 22 17:32:55 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fixed yaml writing Don't unwrap on None value ------------------------------------------------------------------- Tue Mar 21 18:20:13 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Refactor yaml processing Use serde for reading/writing yaml content. This Fixes #40 ------------------------------------------------------------------- Sun Mar 19 15:50:46 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Refactor resume behavior Allow calling the application with different caller options in the same container instance. This Fixes #45 ------------------------------------------------------------------- Sun Mar 19 00:19:57 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Seek to start of tempfile prior reading ------------------------------------------------------------------- Fri Mar 17 16:35:30 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Take all removed files into consideration During delta provisioning take all removed files information from all containers used in the provisioning process into account. This Fixes #46 ------------------------------------------------------------------- Fri Mar 17 08:48:21 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fixed section name, layers vs. layer ------------------------------------------------------------------- Thu Mar 16 23:20:28 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Allow multiple container layers for provisioning So far delta containers can be provisioned against one base container and optional host dependencies. However when creating delta of deltas this introduces additional layers that needs to be taken into account for provisioning the container. This Fixes #43 ------------------------------------------------------------------- Wed Mar 08 16:10:26 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Change the filename of the removed file reference In line with the changes proposed to kiwi from here https://github.com/OSInside/kiwi/pull/2252 the file name to store removed files has been changed from 'vanished' to 'removed' ------------------------------------------------------------------- Sat Mar 04 22:22:02 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fix package requires Needs rsync ------------------------------------------------------------------- Thu Mar 02 11:03:27 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Provide info message when removing an app ------------------------------------------------------------------- Wed Mar 01 12:52:54 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Generate proper changes information ------------------------------------------------------------------- Wed Mar 01 12:33:07 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update man pages Add information about PILOT_DEBUG ------------------------------------------------------------------- Wed Mar 01 12:29:53 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Only attach to running containers ------------------------------------------------------------------- Wed Mar 01 09:59:42 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add debugging information If the env variable PILOT_DEBUG is set this will cause more details about the container startup and provisioning ------------------------------------------------------------------- Wed Mar 01 09:18:50 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Handle static file names in defaults Put the name of the host dependencies file to defaults ------------------------------------------------------------------- Wed Mar 01 09:13:28 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Refactor container startup Delete the concept of respawn. We had respawn to support restart of a container that could not be attached. However with the changes to startup via create -> start (attached) respawn became obsolete ------------------------------------------------------------------- Tue Feb 28 15:54:20 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Added sync_host to resolve host dependencies Based on the presence of a file containing information about the host dependencies a provision step to include that information into the instance to startup is performed. This is related to Issue #37 ------------------------------------------------------------------- Tue Feb 28 15:19:19 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Cleanup dangling containers podman keeps a dangling <none> container in the registry on update. Make sure there is a clean state after pull ------------------------------------------------------------------- Tue Feb 28 15:02:36 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Don't suppress error messages Error messages from podman regarding the command call should not be suppressed ------------------------------------------------------------------- Mon Feb 27 11:57:06 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Added SBOM creation as github action Make use of the cargo-bom tool to create a bill of materials such that it becomes possible to check CVE information against the build of oci-pilot ------------------------------------------------------------------- Thu Feb 23 22:04:14 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update man pages ------------------------------------------------------------------- Thu Feb 23 21:52:24 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Added --base option to registration ------------------------------------------------------------------- Thu Feb 23 21:33:18 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Added pull command to oci-ctl Pull from remote registry. The command exists for convenience reasons. As we currently only support the podman engine the same could be achieved by podman pull ------------------------------------------------------------------- Mon Feb 20 11:30:44 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Implement delta container support Allow to orchestrate a container instance from a base and a delta container ------------------------------------------------------------------- Sat Feb 18 19:25:28 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Refactor resume/respawn Change container startup to use create followed by start. This allows to handle the delta containers which follows next. ------------------------------------------------------------------- Tue Jan 17 15:38:35 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Delete obsolete debian target from Makefile Formerly used to build debian style package sources. But this data was never maintained and suffered from bitrot ------------------------------------------------------------------- Tue Jan 17 15:35:51 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Bump version: 1.0.1 → 1.2.1 ------------------------------------------------------------------- Tue Jan 17 14:36:19 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Run engine through sudo Run engine (e.g podman) through sudo and allow custom user setting. This Fixes #33 ------------------------------------------------------------------- Sat Jan 14 20:59:40 CET 2023 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Added support for resume/respawn Using resume in the flake setup will re-attach to the running container instead of starting a new one. This setting is useful for interactive container sessions as well as for long running processes, e.g services. This addresses parts of Issue #32 ------------------------------------------------------------------- Fri Dec 16 15:24:33 CET 2022 - Jiyang Liu <jiyang.liu@electrobit.com> - Fix typos ------------------------------------------------------------------- Mon Dec 12 16:05:57 CET 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Update README ------------------------------------------------------------------- Fri Dec 02 16:48:13 CET 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Add copyright notice pointing to Elektrobit ------------------------------------------------------------------- Mon Oct 24 15:42:26 CEST 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Delete unused and outdated debian package setup oci-pilot is build using .spec through debbuild. The old debian based package data was not maintained anymore as the original maintainer vanished. Keeping old and unmaintained information is source for trouble. Thus I'm afraid it needs to go ------------------------------------------------------------------- Mon Oct 24 15:41:11 CEST 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fix engine option handling Runtime options were handled as hash values whereas the hash key was used as option name and the hash value as optional option value. This concept does not work for options that can be specified multiple times because the hash key must be unique or when options must be in order. This commit changes the option handling such that the options are provided as simple list values. Each value of the list uses a space to separate the option name from its value. The split by space happens only once and produces a tuple. This Fixes #28 ------------------------------------------------------------------- Sat Oct 08 17:31:31 CEST 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fix spec file requires ------------------------------------------------------------------- Sat Sep 10 23:24:43 CEST 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Build binary only in build-deb ------------------------------------------------------------------- Sat Sep 10 16:33:25 CEST 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Allow to register default entrypoint Some containers provides a default entrypoint. To allow using this entrypoint we can specify just "/" as target path ------------------------------------------------------------------- Sat Sep 10 14:54:24 CEST 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Prevent / in CONTAINER_NAME Replace with _ character ------------------------------------------------------------------- Mon Aug 29 12:51:20 CEST 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Added build arch option to build-deb Add support for --arch option in build-deb. This option allows to specify the package build arch. If not specified the information from uname -m is taken as default ------------------------------------------------------------------- Fri Aug 26 20:45:49 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Reduce binary size for oci-ctl and oci-pilot The changes reduces the release binary size a lot ------------------------------------------------------------------- Fri Aug 26 14:42:48 CEST 2022 - Marcus Schäfer <marcus.schaefer@elektrobit.com> - Fix use of term OCI image and OCI container ------------------------------------------------------------------- Tue Aug 23 16:15:27 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added manual pages Add man pages for all commands and integrate them with the package build. This Fixes #17 ------------------------------------------------------------------- Mon Aug 22 14:32:40 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Refactor yaml configuration format This is related to Issue #17 and changes the yaml config file format to the format shown in the following example: ```yaml container: name target_app_path: path/to/program/in/container host_app_path: path/to/program/on/host runtime: podman: --storage-opt: size=10G --rm: -ti: ``` The new attribute "host_app_path" was required to allow the purge command to work correctly if the app path inside of the container is different than the path used on the host. ------------------------------------------------------------------- Fri Aug 19 16:11:07 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed Cargo.toml glob setting typo in version statement leading to compile time warnings ------------------------------------------------------------------- Fri Aug 19 16:09:02 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed remove command The remove command did not delete the main config file only the pilot link and the config .d directory. In addition the removing code was not strict enough on checking if the provided app path is really something that should be deleted by oci-ctl. Thus I also added sanity checks to prevent accidental deletion of arbitrary files on the system ------------------------------------------------------------------- Fri Aug 19 15:31:05 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add support for oci-ctl list List all registered applications. This Fixes #21 ------------------------------------------------------------------- Thu Aug 18 17:03:48 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed space issues and add docstrings for methods ------------------------------------------------------------------- Thu Aug 18 16:54:36 CEST 2022 - Marcin Katulski <marcin.katulski@gmail.com> - Implement removal of single registered app link (#23) Implement removal of single registered app link. Also implement container purge functionality This Fixes #13 ------------------------------------------------------------------- Thu Aug 18 14:47:35 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add oci-ctl build subcommand (#22) Implements building a debian package including oci-pilot app registration hooks from a given OCI container tar file. The produced package(s) will be organized as local debian repository such that they can be consumed via apt. This Fixes #18 ------------------------------------------------------------------- Thu Jul 28 09:25:41 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed reading runtime section ------------------------------------------------------------------- Wed Jul 27 18:25:54 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Refactor register subcommand Follow the change of the oci-pilot refactoring and adapt the registration code. The registration of an app now performs the following steps: 1. Create the app symlink pointing to /usr/bin/oci-pilot 2. Create the app config file and custom app config.d directory ------------------------------------------------------------------- Wed Jul 27 16:58:55 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Rename oci-register to oci-ctl ------------------------------------------------------------------- Wed Jul 27 11:28:56 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - refactor pilot link structure and config file The former implementation of osc-pilot did not require an app config file and solved the required parts of a registration by a symlink name structure. However, this concept is not flexible enough and will now be changed. In this commit the osc-pilot code changed in two ways: 1. The app symlink must point to the osc-pilot binary 2. The osc-pilot binary requires an app config below /usr/share/flakes supporting the following structure /usr/share/flakes ├── app.d │ └── custom.yaml └── app.yaml app.yaml is mandatory and created when registering the app. The optional app.d directory allows to add additional config information which could be provided via external packages. All yaml snippets are combined to one prior passing to the yaml parser. The files in app.d are read in alpha sort order. ------------------------------------------------------------------- Wed Jul 20 16:34:37 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Implement oci-register register subcommand This commit implements the symlink procedure to register a container application. This Fixes #12 ------------------------------------------------------------------- Wed Jul 20 16:22:53 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - fixed function doc ------------------------------------------------------------------- Wed Jul 20 14:23:34 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Improve usage message ------------------------------------------------------------------- Wed Jul 20 13:15:55 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Change location for optional app config file Read config file from /usr/share/flakes/APP.yaml ------------------------------------------------------------------- Tue Jul 19 18:13:58 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Install to /usr/bin ------------------------------------------------------------------- Tue Jul 19 18:00:45 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed package build Cleanup Makefile, de-duplicate source tar setup and fixed spec file and rules file for new sourcetar ------------------------------------------------------------------- Tue Jul 19 17:01:40 CEST 2022 - Nader Hariri <naderinsa@gmail.com> - Add debian target to Makefile This enables building a non-native debian package for oci-pilot. ------------------------------------------------------------------- Tue Jul 19 16:53:05 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add init method prior registration task For creating the symlink structure to a container application a directory is needed which stores the container symlinks. This commit adds the needed init method to create this directory prior any registration tasks. All container symlinks will be stored in /usr/share/flakes. This means an application link structure for "app@container" would look like this: /usr/bin/app -> /usr/share/flakes/container -> /usr/bin/oci-pilot A flake is also the name we invented to handle and package OCI containers which gets managed by oci-pilot ------------------------------------------------------------------- Tue Jul 19 16:04:20 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Implementation for oci-register load The load subcommand calls podman to load the given OCI tarball into the local registry ------------------------------------------------------------------- Tue Jul 19 13:46:57 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added basic CLI implementation interface Add structure and method bodies to implement commandline capabilities ------------------------------------------------------------------- Mon Jul 18 09:54:36 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added unit testing via actions ------------------------------------------------------------------- Sat Jul 16 17:44:11 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added initial cli interface for oci-register Use a command based positional cli interface supporting sub-commands and its options ------------------------------------------------------------------- Sat Jul 16 17:14:45 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Restructure source tree Move launcher to oci-pilot for consistency ------------------------------------------------------------------- Fri Jul 15 14:38:43 CEST 2022 - Nader Hariri <naderinsa@gmail.com> - Add install & uninstall targets to Makefile ------------------------------------------------------------------- Fri Jul 15 14:36:50 CEST 2022 - Nader Hariri <naderinsa@gmail.com> - Add test target to Makefile ------------------------------------------------------------------- Fri Jul 15 14:33:44 CEST 2022 - Nader Hariri <naderinsa@gmail.com> - Add build & clean targets to Makefile ------------------------------------------------------------------- Tue Jul 12 21:01:10 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Support program runtime config file Options to control how podman starts the container can now be provided as /etc/pilot/program_name.yaml like the following example shows: runtime: --storage-opt: size=10G --rm: If no runtime configuration exists the following defaults apply * Container resources will be automatically deleted after the call. * Interactive sessions will be allowed ------------------------------------------------------------------- Tue Jul 12 10:30:38 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Fixed launcher_test example link structure The pilot binary was renamed to oci-pilot. The symlinks got forgotten. This commit fixes it ------------------------------------------------------------------- Mon Jul 11 15:31:00 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Rename to oci-pilot ------------------------------------------------------------------- Mon Jul 11 12:33:29 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add packaging infrastructure Adds a "make package" target which produces all files needed to build pilot with vendoring. Simple copy all files produced below the package/ directory and put them into OBS. ------------------------------------------------------------------- Sun Jul 10 17:28:43 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Add tests for app_path and container_link ------------------------------------------------------------------- Sun Jul 10 15:50:15 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Refactor source structure ------------------------------------------------------------------- Fri Jul 08 15:41:53 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Allow to search in path ------------------------------------------------------------------- Tue Jul 05 16:36:16 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added more launcher examples ------------------------------------------------------------------- Tue Jul 05 16:33:07 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - More flexible symlink structure ------------------------------------------------------------------- Tue Jul 05 16:19:02 CEST 2022 - Marcus Schäfer <marcus.schaefer@gmail.com> - Added pilot launcher Run container according to a symlink structure
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
