File colorhug-client.changes of Package colorhug-client

Overview Repositories Revisions Requests Users Attributes Meta

File colorhug-client.changes of Package colorhug-client (Revision cc02bbc45408e0b8efb66705994c2991)

Currently displaying revision cc02bbc45408e0b8efb66705994c2991 , Show latest

-------------------------------------------------------------------
Mon Nov 10 12:12:43 UTC 2014 - kkaempf@suse.com

- Update to version 0.2.3
  New Features:
  - Show the Yxy and sRGB values when using take-readings-xyz
    (Richard Hughes)

Bugfixes:
  - Do not fail TakeReadingRaw when using CH2 (Richard Hughes)
  - Do not show CCMX matrices for different device types
    (Richard Hughes)

-------------------------------------------------------------------
Mon Sep 15 06:43:48 UTC 2014 - kkaempf@suse.com

- Update to version 0.2.2
  - This release requires colord >= 1.2.3
 
  New Features:
  - Load the colorhug-spectro-utils data file from a GResource
  - Support ColorHug2 in colorhug-ccmx and colorhug-flash
  - Support getting and setting the DAC value on ColorHug+

Bugfixes:
  - Do not use deprecated widgets in the spectro tool
  - Don't set the multiplier or integral on v2 hardware
  - Fix autogen failure with new gettexts
  - Remove suspicious usage of sizeof with a numeric constant
  - Use ch_device_check_firmware() to verify the firmware

- drop colorhug-client-colorhug_plus.patch, upstream

-------------------------------------------------------------------
Fri Feb  7 21:23:50 UTC 2014 - dimstar@opensuse.org

- Update to version 0.2.1:
  + New Features: Add an AppData file for colorhug-flash and
    colorhug-ccmx.
  + Bugfixes:
    - Find the new ColorHug VID:PID in the USB example.
    - Do not use g_type_init() for new versions of GLib.
    - Rely on intltool >= 0.50 for GSettings translation.
- Add colorhug-client-colorhug_plus.patch: Rename 'ColorHug
  Spectro' to 'ColorHug+' for trademark reasons.

-------------------------------------------------------------------
Wed Sep  4 14:58:08 UTC 2013 - coolo@suse.com

- Update to version 0.2.0:
  + New Features:
    - Add a command to get the spectral data from the CCD.
    - Add a 'get-adc-vrefs' command to show the ADC Vref+ and
      Vref-.
    - Add help buttons to colorhug-flash and colorhug-ccmx.
    - Add some yelp documentation for the ColorHug device.
    - Add the ability to get and set CCD calibration values.
    - Support setting the blue LED in the ColorHug Spectro.
  + Bugfixes:
    - Do not refresh the calibration data twice when setting a
      custom CCMX.
    - Do not use deprecated colord functionality.
    - Remove the internal libcolorhug and depend on the system
      copy.
    - Set a title when generating a CCMX file.
    - Use gnome-autogen.sh to setup yelp rather than rolling our
      own thing.
- Add itstool BuildRequires, new dependency.

-------------------------------------------------------------------
Tue Apr 23 09:19:40 UTC 2013 - dimstar@opensuse.org

- Update to version 0.1.14:
  + New Features:
    - Compile the GtkBuilder files as a GResources to speed up
      startup.
    - Add a 'ccmx-upload' command to colorhug-cmd.
    - Allow the user to easily generate a CCMX correction matrix.
  + Bugfixes:
    - Use the UTF-8 'â rather than '...' in UI code.
    - Sort the profiles by name in colorhug-ccmx.
    - Don't use the deprecated INCLUDES in Makefile.am.
    - Never use -Werror when building.
    - Fix two difficult to translate strings.
    - Use an external libcolorhug if it exists rather than the
      internal copy.
- Changes from version 0.1.13:
  + New Features:
    - Add various demo programs for resetting the ColorHug.
    - Add a utility program to interface with the ColorHug Spectro.
    - Add client support for getting the device ambient
      temperature.
    - Add commands to read and write from the SRAM.
    - Add defines for the ColorHug Spectro.
    - Allow the user to flash an Intel HEX file from the command
      line.
    - Show the spectro temperature in the power utility.
  + Bugfixes:
    - Add self-test to the list of completion commands.
    - Add the ChSha1 symbol to the introspection data.
    - Add the missing GObjectIntrospection markup to ChDeviceQueue.
    - Cope with device errors without aborting when taking a raw
      measurement.
    - Don't return flashing success when the device failed to
      re-appear.
    - Fix flashing firmware with libusbx 1.0.13.
    - Fix make check when a ColorHug Spectro is inserted.
    - Fix the example to work when firmware > 1.2.0 is used.
    - Fix up the remaining introspection warnings.
    - Increase the device reset timeout for slow USB hubs.
    - Only require colord-gtk when building the debugging tools.
    - Remove some dead code spotted by coverity.
- Drop libcolorhug1 and libcolorhug-devel sub-packages: the library
  was moved to colord.

-------------------------------------------------------------------
Fri Nov  2 13:05:39 UTC 2012 - p.drouand@gmail.com

- Update to 0.1.12 version :
 New Features:
 - Add colorhug-profile to compare the measurement modes (Richard Hughes)
 - Add subcommands to get and set the measurement mode (Richard Hughes)

Bugfixes:
 - Accept full HID packets from devices with firmware >= 1.2.0 (Richard Hughes)
 - Fix a small memory leak when commands with helpers and callbacks fail (Richard Hughes)
 - Return a uint32 type for TAKE_READING_RAW (Richard Hughes)
- Remove unused conditional macros

-------------------------------------------------------------------
Sun Apr 22 05:19:11 UTC 2012 - mrdocs@opensuse.org

-add proper copyright to the spec file

-------------------------------------------------------------------
Fri Apr 20 11:03:37 UTC 2012 - vuntz@opensuse.org

- Change BuildRequires to pkgconfig() style:
  + Old ones: glib2-devel, gtk3-devel, libcanberra-devel,
    libcolord-devel, libgusb2-devel, liblcms2-devel, libsoup-devel.
  + New ones: colord, gio-2.0, glib-2.0, gmodule-2.0, gobject-2.0,
    gtk+-3.0, gusb, lcms2, libcanberra-gtk3, libsoup-2.4.
- Remove unneeded BuildRequires: gettext, libcanberra-gtk3-0,
  sqlite-devel.
- Change license tag from GPL-2.0 to GPL-2.0+.
- Split translations in a lang subpackage.
- General cleanup of spec file for inclusion in Factory.

-------------------------------------------------------------------
Wed Apr 18 07:23:10 UTC 2012 - kkaempf@suse.com

- Version 0.1.8
  Released: 2012-04-17

New Features:
  - Add a libusb0.1 example program that can run on RHEL5
  - Add a simple colorhug-ccmx icon
  - Make a sound when colorhug-flash fails or completes the update
   
  Bugfixes:
  - Add gmodule-2.0 to the GLib configure check
  - Automatically use the correct proxy server using glib-networking
  - Check the buffer size before attempting to parse
  - Don't assume const data is available when verifying firmware
  - Keep track of the device state in ChDeviceQueue
  - Prevent critical warnings when doing 'colorhug list-calibration'
  - Use the device state to work out if there are pending commands

-------------------------------------------------------------------
Fri Mar 16 07:16:34 UTC 2012 - kkaempf@suse.com

- Version 0.1.7
  Released: 2012-03-15

New Features:
  - Add a class responsible for async-queued-operations to multiple
    devices
  - Allow the user to update to test firmware if enabled in GSettings
  - Create a libcolorhug library that is designed for low level
    access to the device
  
  Bugfixes:
  - Add self test code to test the new incomplete-request functionality
  - Convert colorhug-ccmx to using ChDeviceQueue to decrease the
    startup delay
  - Convert colorhug-flash to using ChDeviceQueue to increase the
    flash speed
  - Convert the colormgr tool to using ChDeviceQueue
  - Correctly detect the failure to re-enumerate
  - Do not hardcode the server path, instead set it in the GSettings
    schema
  - Do not show an empty warning box if there is no firmware flash
    warning
  - Do not use g_usleep() when waiting for a device reconnect

-------------------------------------------------------------------
Mon Mar  5 07:44:57 UTC 2012 - kkaempf@suse.com

- Update to version 0.1.6
  Released: 2012-03-04

New Features:
  - Add a flash-firmware-force command (Richard Hughes)
  - Add a new icon for colorhug-flash (Lapo Calamandrei)
  - Add a new inactive colorimeter-colorhug icon for future use (Lapo
    Calamandrei)
  - Add support for getting and setting the PCB errata value
    (Richard Hughes)
  - Add support for TakeReadingArray and plot a simple graph with the
    results (Richard Hughes)
  - Allow the user to set the default LED correction matrix (Richard
    Hughes)

Bugfixes:
  - Check the calibration determinant before writing to the device
    (Richard Hughes)
  - Do not write temp files with predictable names to /tmp (Richard
    Hughes)
  - Implement loading CCMX from file (Michal Čihař)
  - Increase the device reconnect timeout after flashing (Richard
    Hughes)
  - Intialize leds to 0 in ch_device_cmd_get_leds() (Jussi Kukkonen)
  - Recognise TYPE_FACTORY in the ccmx loader (Richard Hughes)
  - Remove all locale dependent string parsing functions (Richard
    Hughes)
  - Repair device only once while forced (Michal Čihař)
  - Set correct return value (Michal Čihař)
  - set_leds/get_leds() argument is not ChStatusLed, but guint8
    (Jussi Kukkonen)
 - Use G_GSIZE_FORMAT when printing gsize values (Jussi Kukkonen)

-------------------------------------------------------------------
Fri Jan 27 07:49:22 UTC 2012 - kkaempf@suse.com

- Update to 0.1.5
  Released: 2012-01-26

Notes:
  - We've now switched to a XML manifest format which allows us to check
    the size and sha1sum of the firmware file, and also to show the user
    any warnings about the new firmware.
       
  New Features:
  - Add an interactive version of 'colorhug set-dark-offsets'
    (Richard Hughes)
  - Add a --repair command line argument to colorhug-ccmx (Richard
    Hughes)
  - Add a simple HID client example (Richard Hughes)
  - Added name and email fields in client (Matthew Hirsch)
  - Add icons for the application/x-ccmx mime type (Richard Hughes)
  - Add some raw EEPROM commands to the command line tool (Richard
    Hughes)
  - Allow the user to flash stand alone files with colorhug-flash
    (Richard Hughes)
  - Check the SHA1 of the firmware before using it (Richard Hughes)
  - Show warning messages about firmware in a modal dialog box
    (Richard Hughes)

Bugfixes:
  - Always pad the flash .bin file to a 64 byte chunk (Richard Hughes)
  - Fix handing device endianess (Michal Čihař)
  - Increase the USB timeout for dark reads (Richard Hughes)
  - Show the user the sensor conditions before showing CLI results
    (Richard Hughes)

-------------------------------------------------------------------
Wed Jan 11 07:47:33 UTC 2012 - kkaempf@suse.com

- Version 0.1.4

New Features:
  - A massive number of new translations from Transifex, thanks!
  - Add a missing manpage for colorhug-ccmx (Michal Čihař)
  
  Bugfixes:
  - Add transifex integration (Richard Hughes)
  - Add some button tooltips (Richard Hughes)
  - Move the command helpers out of ChClient (Richard Hughes)
  - Ensure we never delete the factory calibration matrix in
    colorhug-ccmx (Richard Hughes)
  - Allow the user to repair a device without a factory calibration
    matrix (Richard Hughes)
       
-------------------------------------------------------------------
Mon Jan  2 09:27:11 UTC 2012 - kkaempf@suse.com

- Initial package release, version 0.1.3

Places

File colorhug-client.changes of Package colorhug-client (Revision cc02bbc45408e0b8efb66705994c2991)

Places