File collectl.changes of Package collectl

Overview Repositories Revisions Requests Users Attributes Meta

File collectl.changes of Package collectl (Revision 1362a980a343c6a12ed4a01a8f3b03c3)

Currently displaying revision 1362a980a343c6a12ed4a01a8f3b03c3 , Show latest

-------------------------------------------------------------------
Wed Sep 24 19:41:02 UTC 2014 - tabraham@suse.com

- Update to version 3.7.4
  See RELEASE-collectl for changes

-------------------------------------------------------------------
Thu Dec 12 23:17:15 UTC 2013 - p.drouand@gmail.com

- Update to version 3.6.9
  + Typo in network plot header loop resulted in infinite loop
  + remove $int/secs from numa hit rate calc AND add more precision
    to its output
- Changes from 3.6.8
  + new flag $exportComm must be set in gexpr/ganglia so that they won't
    generate an error if run without -f or -A
  + new switch: --intfilt allows filtering of interrupts
  + always log messages of type F/E to syslog in daemon mode even if
    -m is not set
  + wasn't dealing correctly with missing whitespace after network name in
    /proc/dev/net in initRecord()
  + updated init.d script for suse per the maintainer's instructions
  + extra spaces were being printed in plot mode for tpc stats
  + added entry to envrules.std to deal with intel Phi Co-Processor
  + debian init.d script now does 'exit 1' if status reports 'not running'
  + rawnetignore switch wasn't working correctly
  + found/fixed some subtle problems with --procanalyze as well as some cleanup
    - need to ignore first sample after initializing summary arrays
    - need to init summary hashes for thrutime and accumT because get uninit var
      in print routine is only a single process entry
    - found a typo in procAnalyze() to a $usecs which wasn't being used!
    - added error check to make sure --procanalyze with -P requires -s
  + added a little more debugging output for -d128
  + discovered dynamic disk/network detail names for interactive mode were not
    being reported correctly.  sounds a lot worse than it is because this is
    typically not done very often nor are disks/networks very dynamic except in
    large, virtualized environments such as clouds
  + add to list of devices to exlude from network summary data: tap, dp and nl,
    which are associated with openstack cinder.  remember you can always add
    more to that list with --netfilt
  + $lastHour was never referenced and dayInit() called every time a log was
    created so fix logic to update $lastHour correctly AND call initDay() one
    time and do it before newLog() called.
  + closed a couple of file handles that were left open and reportedly
    causing some defunct processes with -sx.
  + fixed bug in lustre stats recording
  + clarified --showsubopts text about disk and network filters in that they
    apply to both summary and detail data output
  + fixed problem with --import and --stats
  + --statsopt a didn't work because when changed some internal logic missed
    changing a test of $timestampFlag to $timestampCounter[$rawPFlag] and so
    now $timestampCount can be removed entirely
  + clear $firstpass after 1st pass during playback
  + make sure filename initialized before calling loadConfig so if there is
    an error logsys() doesn't get an undefined var warning
  + to be safe, remove any quotes on net/dsk filters in case included by
    mistake in DaemonCommands string
  + tightened up tests to see if daemonized collectl already running
  + if no hiRes::Time, fudge the value of $microInterval based on -i
  + new --procOpt k, removes known shells from process listing with -sZ,
    currently set to /bin.sh, /usr/bin/perl, /usr/bin/python and python
  + fixed varname in lexpr: $debug should have been $lexDebug
- Remove init-cleanup.patch; merged on upstream release
  
-------------------------------------------------------------------
Sat Oct 26 17:59:37 UTC 2013 - p.drouand@gmail.com

- Drop sysvinit support; none of target distributions use sysvinit
  anymore
- Add systemd support
- Install collectl in /usr/bin to get it launchable with systemd and 
  link it in /usr/sbin
- Add a sysconfig file

-------------------------------------------------------------------
Thu Jun  6 01:23:39 UTC 2013 - tabraham@suse.com

- deleted bug-793027.patch : deprecated
- init-cleanup.patch : init script cleanup
- see RELEASE-collectl for list of changes between 3.4.3 and 3.6.7

-------------------------------------------------------------------
Tue Mar  5 05:55:17 UTC 2013 - coolo@suse.com

- update license to new format

-------------------------------------------------------------------
Wed Dec  5 21:46:00 UTC 2012 - tabraham@suse.com

- bug-793027.patch: fix for collectl init script (bnc #793027)

-------------------------------------------------------------------
Sun Sep 18 16:05:27 UTC 2011 - jengelh@medozas.de

- Remove redundant tags/sections from specfile

-------------------------------------------------------------------
Fri Nov  5 15:40:18 UTC 2010 - hvogel@novell.com

- Update to version 3.4.3
  * when errors detected during initialization not skipping subsequent checks
  * added --dskfilt
  * added check for client-side OST uuid status 'DEACTIVATED'
  * support for CPUs dynamically changing stats and going off/on-line
  * new feature: select process by UID range
  * do not issue 'stty' if !PC, running on terminal and !background.
  * added --netfilt
  * changed disk details to use 'cvt()' for reporting number of I/Os since DM
    numbers
  * 2 new process sort fields: pid and cpu
  * only look at $cpuDisabledFlag when processing CPU data

-------------------------------------------------------------------
Tue Apr  6 13:55:50 UTC 2010 - hvogel@novell.com

- Update to version 3.4.1
  * new switch --umask for setting mode to files collectl creates 
  * support for Fusion-IO disks 
  * Support for OFED 1.5
  * Improved performance of playback
  * Added LSB headers to all start scripts
  * New data collection/reporting API
  * New export: gexpr, for exporting data to ganglia
  * Added NFS V4 support and collection
  * Expanded contents of verbose memory output
  * Added Power to environmental monitoring
  * Allow multiple clients to connect when is server mode
  * Added fields to --top for monitoring slabs
  * Expanded --top functionality.
  * Enhanced MDS stats to support lustre 1.6.5
  * Added --grep switch to allow searching/reporting data in raw files
  * A couple of switch names changed to be more consistent
  * Improved help
 
-------------------------------------------------------------------
Thu Jul  3 15:29:05 CEST 2008 - hvogel@suse.de

- Initial package, Version 2.6.4

Places

File collectl.changes of Package collectl (Revision 1362a980a343c6a12ed4a01a8f3b03c3)

Places