File kismet-2010-01-R1-makefile.diff of Package kismet

Overview Repositories Revisions Requests Users Attributes Meta

File kismet-2010-01-R1-makefile.diff of Package kismet

--- Makefile.inc.in
+++ Makefile.inc.in
@@ -1,7 +1,3 @@
-INSTGRP 	?= "@instgrp@"
-MANGRP 		?= "@mangrp@"
-INSTUSR 	?= "root"
-
 ZAURUS 		= @zaurus@
 
 PCAPLNK 	= @pcaplnk@
--- Makefile.in
+++ Makefile.in
@@ -127,31 +123,31 @@
 	@-echo "'Makefile.in' or 'configure' are more current than this Makefile.  You should re-run 'configure'."
 
 binsuidinstall:
-	$(INSTALL) -o $(INSTUSR) -g $(SUIDGROUP) -m 4550 $(CS) $(BIN)/$(CS); 
+	$(INSTALL) -m 4550 $(CS) $(BIN)/$(CS); 
 	
 commoninstall:
 	mkdir -p $(ETC)
 	mkdir -p $(BIN)
 
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 555 scripts/kismet $(BIN)/kismet
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 555 $(NC) $(BIN)/$(NC)
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 555 $(PS) $(BIN)/$(PS); 
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 555 $(DRONE) $(BIN)/$(DRONE);
+	$(INSTALL) -m 555 scripts/kismet $(BIN)/kismet
+	$(INSTALL) -m 555 $(NC) $(BIN)/$(NC)
+	$(INSTALL) -m 555 $(PS) $(BIN)/$(PS); 
+	$(INSTALL) -m 555 $(DRONE) $(BIN)/$(DRONE);
 
 	mkdir -p $(MAN)/man1
-	$(INSTALL) -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet.1 $(MAN)/man1/kismet.1
-	$(INSTALL) -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet_drone.1 $(MAN)/man1/kismet_drone.1
+	$(INSTALL) -m 644 man/kismet.1 $(MAN)/man1/kismet.1
+	$(INSTALL) -m 644 man/kismet_drone.1 $(MAN)/man1/kismet_drone.1
 
 	mkdir -p $(MAN)/man5
-	$(INSTALL) -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet.conf.5 $(MAN)/man5/kismet.conf.5
-	$(INSTALL) -o $(INSTUSR) -g $(MANGRP) -m 644 man/kismet_drone.conf.5 $(MAN)/man5/kismet_drone.conf.5
+	$(INSTALL) -m 644 man/kismet.conf.5 $(MAN)/man5/kismet.conf.5
+	$(INSTALL) -m 644 man/kismet_drone.conf.5 $(MAN)/man5/kismet_drone.conf.5
 
 	mkdir -p $(WAV)
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/new.wav $(WAV)/new.wav
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/packet.wav $(WAV)/packet.wav
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/alert.wav $(WAV)/alert.wav
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/gpslost.wav $(WAV)/gpslost.wav
-	$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 wav/gpslock.wav $(WAV)/gpslock.wav
+	$(INSTALL) -m 644 wav/new.wav $(WAV)/new.wav
+	$(INSTALL) -m 644 wav/packet.wav $(WAV)/packet.wav
+	$(INSTALL) -m 644 wav/alert.wav $(WAV)/alert.wav
+	$(INSTALL) -m 644 wav/gpslost.wav $(WAV)/gpslost.wav
+	$(INSTALL) -m 644 wav/gpslock.wav $(WAV)/gpslock.wav
 
 suidinstall: $(CS)
 	-groupadd -f $(SUIDGROUP)
@@ -162,8 +158,8 @@
 		echo "if there have been any changes to the base config you will need"; \
 		echo "to add them to your config file."; \
     else \
-		$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf;  \
-		echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf;  \
+		$(INSTALL) -m 644 conf/kismet.conf $(ETC)/kismet.conf;  \
+		echo install -m 644 conf/kismet.conf $(ETC)/kismet.conf;  \
 		echo "Installed config into $(ETC)/kismet.conf."; \
 	fi
 	@if test -f $(ETC)/kismet_drone.conf; then \
@@ -171,8 +167,8 @@
 		echo "if there have been any changes to the base config you will need"; \
 		echo "to add them to your config file."; \
     else \
-		$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf;  \
-		echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf;  \
+		$(INSTALL) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf;  \
+		echo install -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf;  \
 		echo "Installed drone config into $(ETC)/kismet_drone.conf."; \
 	fi
 
@@ -194,8 +190,8 @@
 		echo "if there have been any changes to the base config you will need"; \
 		echo "to add them to your config file."; \
     else \
-		$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf;  \
-		echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet.conf $(ETC)/kismet.conf;  \
+		$(INSTALL) -m 644 conf/kismet.conf $(ETC)/kismet.conf;  \
+		echo install -m 644 conf/kismet.conf $(ETC)/kismet.conf;  \
 		echo "Installed config into $(ETC)/kismet.conf."; \
 	fi
 	@if test -f $(ETC)/kismet_drone.conf; then \
@@ -203,8 +199,8 @@
 		echo "if there have been any changes to the base config you will need"; \
 		echo "to add them to your config file."; \
     else \
-		$(INSTALL) -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf;  \
-		echo install -o $(INSTUSR) -g $(INSTGRP) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf;  \
+		$(INSTALL) -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf;  \
+		echo install -m 644 conf/kismet_drone.conf $(ETC)/kismet_drone.conf;  \
 		echo "Installed drone config into $(ETC)/kismet_drone.conf."; \
 	fi
 	@echo "Installed kismet into $(BIN)/."

Places

File kismet-2010-01-R1-makefile.diff of Package kismet

Places