Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
network
proftpd
proftpd.init
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File proftpd.init of Package proftpd
#! /bin/sh # Copyright (c) 1995-2004 SUSE Linux AG, Nuernberg, Germany. # All rights reserved. # # Author: Kurt Garloff # Please send feedback to http://www.suse.de/feedback/ # # /etc/init.d/proftpd # and its symbolic link # /(usr/)sbin/rcproftpd # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # ### BEGIN INIT INFO # Provides: proftpd # Required-Start: $syslog $remote_fs # Should-Start: $time ypbind sendmail # Required-Stop: $syslog $remote_fs # Should-Stop: $time ypbind sendmail # Default-Start: 3 5 # Default-Stop: 0 1 2 6 # Short-Description: ProFTPD daemon # Description: Start ProFTPD to allow XY and provide YZ ### END INIT INFO # # Note on runlevels: # 0 - halt/poweroff 6 - reboot # 1 - single user 2 - multiuser without network exported # 3 - multiuser w/ network (text mode) 5 - multiuser w/ network and X11 (xdm) # # Note on script names: # http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html # A registry has been set up to manage the init script namespace. # http://www.lanana.org/ # Please use the names already registered or register one or use a # vendor prefix. # Check for missing binaries (stale symlinks should not happen) # Note: Special treatment of stop for LSB conformance PROFTPD_BIN=/usr/sbin/proftpd test -x $PROFTPD_BIN || { echo "$PROFTPD_BIN not installed"; if [ "$1" = "stop" ]; then exit 0; else exit 5; fi; } PROFTPD_RUNDIR=/var/run/proftpd # Check for existence of needed config file and read it #PROFTPD_CONFIG=/etc/sysconfig/proftpd #test -r $PROFTPD_CONFIG || { echo "$PROFTPD_CONFIG not existing"; # if [ "$1" = "stop" ]; then exit 0; # else exit 6; fi; } # # Read config #. $PROFTPD_CONFIG # Source LSB init functions # providing start_daemon, killproc, pidofproc, # log_success_msg, log_failure_msg and log_warning_msg. # This is currently not used by UnitedLinux based distributions and # not needed for init scripts for UnitedLinux only. If it is used, # the functions from rc.status should not be sourced or used. #. /lib/lsb/init-functions # Shell functions sourced from /etc/rc.status: # rc_check check and set local and overall rc status # rc_status check and set local and overall rc status # rc_status -v be verbose in local rc status and clear it afterwards # rc_status -v -r ditto and clear both the local and overall rc status # rc_status -s display "skipped" and exit with status 3 # rc_status -u display "unused" and exit with status 3 # rc_failed set local and overall rc status to failed # rc_failed <num> set local and overall rc status to <num> # rc_reset clear both the local and overall rc status # rc_exit exit appropriate to overall rc status # rc_active checks whether a service is activated by symlinks . /etc/rc.status # Reset status of this service rc_reset # Return values acc. to LSB for all commands but status: # 0 - success # 1 - generic or unspecified error # 2 - invalid or excess argument(s) # 3 - unimplemented feature (e.g. "reload") # 4 - user had insufficient privileges # 5 - program is not installed # 6 - program is not configured # 7 - program is not running # 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) # # Note that starting an already running service, stopping # or restarting a not-running service as well as the restart # with force-reload (in case signaling is not supported) are # considered a success. case "$1" in start) if [ ! -d $PROFTPD_RUNDIR ]; then mkdir -p $PROFTPD_RUNDIR fi echo -n "Starting proftpd " ## Start daemon with startproc(8). If this fails ## the return value is set appropriately by startproc. /sbin/startproc $PROFTPD_BIN # Remember status and be verbose rc_status -v ;; stop) echo -n "Shutting down proftpd " ## Stop daemon with killproc(8) and if this fails ## killproc sets the return value according to LSB. /sbin/killproc -TERM $PROFTPD_BIN # Remember status and be verbose rc_status -v ;; try-restart|condrestart) ## Do a restart only if the service was active before. ## Note: try-restart is now part of LSB (as of 1.9). ## RH has a similar command named condrestart. if test "$1" = "condrestart"; then echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}" fi $0 status if test $? = 0; then $0 restart else rc_reset # Not running is not a failure. fi # Remember status and be quiet rc_status ;; restart) ## Stop the service and regardless of whether it was ## running or not, start it again. $0 stop $0 start # Remember status and be quiet rc_status ;; force-reload) echo -n "Reload service proftpd " ## Signal the daemon to reload its config. Most daemons ## do this on signal 1 (SIGHUP). ## If it does not support it, restart the service if it ## is running. # if it supports it: /sbin/killproc -HUP $PROFTPD_BIN #touch /var/run/proftpd.pid # Remember status and be verbose rc_status -v ## Otherwise: #$0 try-restart #rc_status ;; reload) echo -n "Reload service proftpd " ## Like force-reload, but if daemon does not support ## signaling, do nothing (!) # If it supports signaling: /sbin/killproc -HUP $PROFTPD_BIN #touch /var/run/proftpd.pid # Remember status and be verbose rc_status -v ## Otherwise if it does not support reload: #rc_failed 3 #rc_status -v ;; status) echo -n "Checking for service proftpd " ## Check status with checkproc(8), if process is running ## checkproc will return with exit status 0. # Return value is slightly different for the status command: # 0 - service up and running # 1 - service dead, but /var/run/ pid file exists # 2 - service dead, but /var/lock/ lock file exists # 3 - service not running (unused) # 4 - service status unknown :-( # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) # NOTE: checkproc returns LSB compliant status values. /sbin/checkproc $PROFTPD_BIN # NOTE: rc_status knows that we called this init script with # "status" option and adapts its messages accordingly. # Remember status and be verbose rc_status -v ;; probe) ## Optional: Probe for the necessity of a reload, print out the ## argument to this init script which is required for a reload. ## Note: probe is not (yet) part of LSB (as of 1.9) test /etc/proftpd/proftpd.conf -nt $PROFTPD_RUNDIR/proftpd.pid && echo reload ;; *) echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}" exit 1 ;; esac rc_exit
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor