Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
electronics
libsigrokdecode
libsigrokdecode.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File libsigrokdecode.changes of Package libsigrokdecode
------------------------------------------------------------------- Mon Jun 27 17:42:59 UTC 2022 - Stefan Brüns <stefan.bruens@rwth-aachen.de> - Fix build with Python >= 3.9, add 0001-Properly-detect-python-library-for-3.9.patch ------------------------------------------------------------------- Wed Dec 11 22:24:06 UTC 2019 - Stefan Brüns <stefan.bruens@rwth-aachen.de> - Update to 0.5.3 * New supported protocol decoders: - lin: Local Interconnect Network (LIN) protocol - x2444m: Xicor X2444M/P nonvolatile static RAM protocol - ds2408: 1-Wire 8-channel addressable switch - cc1101: Low-power sub-1GHz RF transceiver chip - enc28j60: Microchip ENC28J60 10Base-T Ethernet controller protocol - pca9571: NXP PCA9571 8-bit I²C output expander - seven_segment: 7-segment display protocol - amulet_ascii: Amulet Technologies LCD controller ASCII protocol - tdm_audio: TDM multi-channel audio protocol - signature: Annotate signature of logic patterns - nes_gamepad: NES gamepad button states - flexray: Automotive network communications protocol - ir_rc6: RC-6 infrared remote control protocol - ieee488: IEEE-488 General Purpose Interface Bus (GPIB/HPIB or IEC) - hdcp: HDCP protocol over HDMI * Several other improvements, see included NEWS file * The library API and ABI is compatible with version 0.5.2 ------------------------------------------------------------------- Wed Sep 12 21:19:08 UTC 2018 - Stefan Brüns <stefan.bruens@rwth-aachen.de> - Update to 0.5.2 * New supported protocol decoders: - mcs48: Intel MCS-48 external memory access protocol - st7735: Sitronix ST7735 TFT controller protocol - atsha204a: Microchip ATSHA204A CryptoAuthentication device - cfp: 100 Gigabit C form-factor pluggable (CFP) protocol - jtag_ejtag: MIPS EJTAG protocol - swim: STM8 Single Wire Interface Module (SWIM) protocol - cec: HDMI Consumer Electronics Control (CEC) protocol - miller: Miller encoding protocol - ook: On-off keying protocol - ook_oregon: Oregon Scientific weather sensor protocol - ook_vis: OOK visualisation in various formats * Several other improvements, see included NEWS file * The library API and ABI is compatible with version 0.5.1 - Cleanup: remove %defattr, use %license ------------------------------------------------------------------- Fri Apr 13 15:53:08 UTC 2018 - stefan.bruens@rwth-aachen.de - Update to 0.5.1 * New (backported) supported protocol decoders: - ac97: Audio and modem control for PC systems - ds243x: Maxim DS243x series 1-Wire EEPROM protocol - maple_bus: Maple bus peripheral protocol for SEGA Dreamcast - morse: Demodulated morse code protocol - graycode: Accumulate rotary encoder increments, timing statistics - counter: Count number of edges - sda2506: Serial nonvolatile 1-Kbit EEPROM - rc_encode: PT2262/HX2262/SC5262 remote control encoder protocol * The library API and ABI is compatible with version 0.5.0 * Support for the PD v2 API has been dropped. All PDs distributed with libsigrokdecode were converted to the new, query-based API. ------------------------------------------------------------------- Sat Jul 1 14:28:50 UTC 2017 - stefan.bruens@rwth-aachen.de - Remove Obsoletes: libsigrokdecode3. Obsoletes implies a conflict, so there is no way in rpm to trigger deinstalation of deprecated shared library packages. ------------------------------------------------------------------- Tue Jun 13 20:31:26 UTC 2017 - stefan.bruens@rwth-aachen.de - Update to 0.5.0 * New supported protocol decoders: - ade77xx Poly phase multifunction energy metering IC protocol - adf435x Wideband synthesizer with integrated VCO - dali DALI lighting control protocol - dsi DSI lighting control protocol - eeprom93xx 93xx series Microwire EEPROM protocol (bug #931) - iec Commodore serial IEEE-488 (IEC) bus protocol - microwire 3-wire, half-duplex, synchronous serial bus (bug #931) * Add support for the new query-based PD v3 decoder API. ------------------------------------------------------------------- Mon Dec 26 23:39:34 UTC 2016 - stefan.bruens@rwth-aachen.de - Update to 0.4.1 * New (backported) supported protocol decoders: - aud Renesas/Hitachi Advanced User Debugger (AUD) protocol - avr_pdi Atmel proprietary interface for the ATxmega MCU - dmx512 Professional lighting control protocol - em4305 EM4205/EM4305 100-150kHz RFID protocol - gpib IEEE-488 GPIB / HPIB protocol - ps2 PS/2 keyboard/mouse interface - rgb_led_ws281x RGB LED string protocol (WS281x) - ssi32 Synchronous Serial Interface (32bit) protocol - t55xx T55xx 100-150kHz RFID protocol - wiegand Wiegand interface for electronic entry systems * Introduce a decoders/common facility for code shared between PDs (bug #804). * Supply metadata to all stacked decoders, not just low-level ones (bug #664). * Various Doxygen/documentation improvements. * Factor out a srd_decoder_apiver() internal helper function. * srd_inst_decode(): Return SRD_ERR_ARG if unitsize is 0. * Print error messages when decoders fail load time checks (bug #704). * Fix multiple valgrind warnings (memory leaks and such). * Build system: Sort PD list alphabetically in "make install". * Enhancements to several PDs, see NEWS for details. - Drop upstream 0001-Supply-metadata-to-stacked-decoders.patch ------------------------------------------------------------------- Fri Feb 12 16:56:06 UTC 2016 - stefan.bruens@rwth-aachen.de - Propagate metadata (e.g. samplerate) to stacked decoders * Add 0001-Supply-metadata-to-stacked-decoders.patch ------------------------------------------------------------------- Sat Jan 30 12:21:20 UTC 2016 - stefan.bruens@rwth-aachen.de - Update to 0.4.0 * New supported protocol decoders: - adns5020: Bidirectional command and data over an SPI-like protocol - am230x: Aosong AM230x/DHTxx/RHTxx humidity/temperature sensor - arm_etmv3: Decode ETM instruction trace packets - arm_itm: Trace data from Cortex-M / ARMv7m ITM module - arm_tpiu: Filter TPIU formatted trace data into separate streams - eeprom24xx: 24xx series I²C EEPROM protocol - em4100: EM4100 100-150kHz RFID protocol - jitter: Retrieves the timing jitter between two digital signals - max7219: 8-digit LED display driver - mdio: Half-duplex sync serial bus for MII management (MAC/PHY) - modbus: Modbus RTU protocol for industrial applications - mrf24j40: IEEE 802.15.4 2.4 GHz RF tranceiver chip - nrf24l01: 2.4GHz transceiver chip - pwm: Analog level encoded in duty cycle percentage - qi: Async serial protocol for Qi charger receivers - rfm12: HopeRF RFM12 wireless transceiver control protocol - sdcard_sd: Secure Digital card (SD mode) low-level protocol - spdif: Serial bus for connecting digital audio devices - stepper_motor: Absolute position and movement speed from step/dir - swd: Two-wire protocol for debug access to ARM CPUs - tca6408a: Texas Instruments TCA6408A 8-bit I²C I/O expander - timing: Calculate time between edges - usb_power_delivery: USB Power Delivery protocol - usb_request: USB (low-speed and full-speed) transaction/request protocol ------------------------------------------------------------------- Fri Sep 25 03:10:52 UTC 2015 - stefan.bruens@rwth-aachen.de - Track GIT version (upcoming 0.4.0) * update libsigrokdecode-versioned-decoders.patch ------------------------------------------------------------------- Tue Aug 4 14:56:23 UTC 2015 - max@suse.com - New version: 0.3.1: * This is mostly a bugfix-release, the C library API was not changed. * Improvements and bugfixes in existing protocol decoders. * New decoders: adns5020, am230x, arm_etmv3, arm_itm, arm_tpiu, eeprom24xx, jitter, mdio, mrf24j40, nrf24l01, pwm, rfm12, spdif, stepper_motor, swd, tca6408a, timing. ------------------------------------------------------------------- Fri Oct 24 11:26:48 UTC 2014 - dimstar@opensuse.org - Add libsigrokdecode-versioned-decoders.patch: move decoders to a versioned subdirectory. - Change RPM Group of the library package to System/Libraries. ------------------------------------------------------------------- Thu Oct 23 11:52:31 UTC 2014 - max@suse.com - Keep the decoders under /usr/share/libsigrokdecode (unversioned) otherwise the library won't find them. ------------------------------------------------------------------- Sun Aug 3 09:48:52 UTC 2014 - dmitry_r@opensuse.org - Change package license to GPL-3.0+ according to README - Minor spec file cleanup ------------------------------------------------------------------- Mon Jun 2 18:53:48 UTC 2014 - bugs@vdm-design.de - sync spec file with .spec from rmax ------------------------------------------------------------------- Fri May 30 10:20:06 UTC 2014 - bugs@vdm-design.de - Update to 0.3.0 * New supported protocol decoders: - guess_bitrate Guess the bitrate/baudrate of a signal - ir_nec NEC infrared remote control protocol - ir_rc5 RC-5 infrared remote control protocol - midi Musical Instrument Digital Interface - parallel Parallel synchronous bus decoder - rgb_led_spi RGB LED string decoder (SPI) - xfp 10 Gigabit Small Form Factor Pluggable Module - z80 Zilog Z80 microprocessor disassembly * New features: - Support for annotation rows (groups of annotation classes to be shown together). - The new OUTPUT_BINARY facility allows PDs to output decoded data in various (file) formats (e.g. I²S output in WAV format, USB output in PCAP format for Wireshark, LCD controller output in PNG format for viewing, and so on). - The new OUTPUT_META facility allows PDs to report certain data points or events to the frontend, which can be used for various post-processing and statistics purposes (e.g. simple counts, average/mean values, min/max values, and more). - The protocol decoder API has changed, the API version is bumped to 2. Decoders using the old PD API no longer work with this library release. - A large amount of PD fixes have been done to improve the usability of all PDs when used with GUIs (long/short annotations for zoom-dependent display, corrected annotation sample numbers, use of annotation rows, and so on). - Various API improvements were also performed to allow for all the new features. You can take a look at the API docs for more details. - And of course all PDs and the library code have received quite a few bugfixes, as usual. ------------------------------------------------------------------- Thu Jan 24 17:39:58 UTC 2013 - max@suse.com - Requires python3. ------------------------------------------------------------------- Wed Jan 16 15:22:45 UTC 2013 - max@suse.com - Initial build from git snapshot.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor