File _service:obs_scm:microos-tools-2.19+git19.obscpio of Package microos-tools

Overview Repositories Revisions Requests Users Attributes Meta

File _service:obs_scm:microos-tools-2.19+git19.obscpio of Package microos-tools

07070100000000000081A4000000000000000000000001663B317D0000016D000000000000000000000000000000000000002400000000microos-tools-2.19+git19/.gitignoreMakefile.in
autom4te.cache
aclocal.m4
compile
configure
depcomp
install-sh
missing
stamp-h1
# files generated by configure
.deps
.libs
Makefile
config.h
*.o
*.lo
*.la
*.a
*~
*.rej
*.orig
core
config.log
config.status
test-driver
test-suite.log
check-output.*
firstboot/MicroOS-firstboot.service
microos-tools-*.tar.*
locale-check/locale-check
devel-tools/rpmorphan
07070100000001000041ED000000000000000000000002663B317D00000000000000000000000000000000000000000000001E00000000microos-tools-2.19+git19/.obs07070100000002000081A4000000000000000000000001663B317D000001EE000000000000000000000000000000000000002C00000000microos-tools-2.19+git19/.obs/workflows.ymlci_workflow:
  steps:
    - branch_package:
        source_project: devel:microos:ci:microos-tools
        source_package: microos-tools
        target_project: devel:microos:ci:microos-tools
  filters:
    event: pull_request

master_workflow:
  steps:
    - branch_package:
        source_project: devel:microos:ci:microos-tools
        source_package: microos-tools
        target_project: devel:microos:ci:microos-tools
  filters:
    event: push
    branches:
      only:
        - master
07070100000003000081A4000000000000000000000001663B317D0000467E000000000000000000000000000000000000002100000000microos-tools-2.19+git19/COPYING                    GNU GENERAL PUBLIC LICENSE
                       Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc., <http://fsf.org/>
 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your
freedom to share and change it.  By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.)  You can apply it to
your programs, too.

When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and
modification follow.

GNU GENERAL PUBLIC LICENSE
   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License.  The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language.  (Hereinafter, translation is included without limitation in
the term "modification".)  Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope.  The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.

You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices
    stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in
    whole or in part contains or is derived from the Program or any
    part thereof, to be licensed as a whole at no charge to all third
    parties under the terms of this License.

c) If the modified program normally reads commands interactively
    when run, you must cause it, when started running for such
    interactive use in the most ordinary way, to print or display an
    announcement including an appropriate copyright notice and a
    notice that there is no warranty (or else, saying that you provide
    a warranty) and that users may redistribute the program under
    these conditions, and telling the user how to view a copy of this
    License.  (Exception: if the Program itself is interactive but
    does not normally print such an announcement, your work based on
    the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole.  If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works.  But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.

In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.

3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable
    source code, which must be distributed under the terms of Sections
    1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three
    years, to give any third party, for a charge no more than your
    cost of physically performing source distribution, a complete
    machine-readable copy of the corresponding source code, to be
    distributed under the terms of Sections 1 and 2 above on a medium
    customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer
    to distribute corresponding source code.  (This alternative is
    allowed only for noncommercial distribution and only if you
    received the program in object code or executable form with such
    an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for
making modifications to it.  For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable.  However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.

If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License.  Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.

5. You are not required to accept this License, since you have not
signed it.  However, nothing else grants you permission to modify or
distribute the Program or its derivative works.  These actions are
prohibited by law if you do not accept this License.  Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions.  You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.

7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all.  For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.

It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices.  Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.

This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded.  In such case, this License incorporates
the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

Each version is given a distinguishing version number.  If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation.  If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.

10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission.  For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this.  Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

{description}
    Copyright (C) {year}  {fullname}

This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
    with this program; if not, write to the Free Software Foundation, Inc.,
    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author
    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary.  Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program
  `Gnomovision' (which makes passes at compilers) written by James Hacker.

{signature of Ty Coon}, 1 April 1989
  Ty Coon, President of Vice

This General Public License does not permit incorporating your program into
proprietary programs.  If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.
07070100000004000081A4000000000000000000000001663B317D0000010B000000000000000000000000000000000000002500000000microos-tools-2.19+git19/Makefile.amAUTOMAKE_OPTIONS = 1.6 foreign check-news dist-xz

SUBDIRS = systemd-proxy-env systemd-printenv tmpfs \
	selinux devel-tools

CLEANFILES = *~

EXTRA_DIST = README.md

profile_DATA = man-online.sh
profiledir = $(prefix)$(sysconfdir)/profile.d
bin_SCRIPTS = man-online
07070100000005000081A4000000000000000000000001663B317D000008EB000000000000000000000000000000000000001E00000000microos-tools-2.19+git19/NEWSVersion 2.21:
- 98selinux-microos: Work around overlayfs bug [bsc#1210690]
- 98selinux-microos: Create .relabelled marker before relabelling
- Drop extra sysctl file for coredumps [boo#1091684]

Version 2.20:
- 98selinux-microos: Don't load the policy to label the system

Version 2.19:
- Clean up selinux-autorelabel-generator and make it compatible with systemd 253

Version 2.18
- Add TMPDIR to tukit binddirs for Salt
- 98selinux-microos: Add chroot as dependency
- Fix spelling error in warning

Version 2.17
- selinux-autorelabel-generator: Don't cross partition boundaries
  for /.snapshots when relabeling [issue#11]

Version 2.16
- 98selinux-microos: Make the btrfs subvolume writable temporarily [boo#1202395]

Version 2.15
- 98selinux-microos: Add grep as dependency

Version 2.14
- Fix Makefile for devel-tools

Version 2.13
- 98selinux-microos: Don't rely on selinux=1 [bsc#1202449]
- Add sysext-add-debug
- Make sure /var/lib/overlay exists before relabeling

Version 2.12
- Remove locale-check, aaa_base has now an own solution
- Remove old CaaSP stuff
- Remove systemd firstboot overwrite

Version 2.11
- Fix unwritable /var / /etc after SELinux relabel [bsc#1186563]

Version 2.10
- Fixes and improvements for SELinux support
- Add devel tools

Version 2.9
- Use absolute path for selinuxenabled in systemd generator

Version 2.8
- Don't propagate umounts into the real root
- Use content of .autorelabel only if it exists

Version 2.7
 - Add workaround if /.autorelabel is used, don't ignore it.
 - Use content of .autorelabel as additional restorecon argument

Version 2.6
 - Don't delete autorelabel file in initrd

Version 2.5
 - Remove tmpfiles.d/tmp.conf, now handled by filesystem package

Version 2.4
 - Don't override tmp.mount options but use tmpfiles.d/tmp.conf to
   set the labels [bsc#1175379]

Version 2.3
 - override tmp.mount option to set correct SELinux label for /tmp
 - Prepare "noexec" for tmp.mount
 - Override TMPDIR for salt to not exec things in /tmp
 - Add selinux dracut module to relabel system at bootup
 - Add locale-check to reset locale to system default if the one
   set by SSH does not exist [bsc#1156175]

Version 2.2
 - tmp.mount is provided now by systemd

Version 2.1
 - Use tmpfs for /tmp

Version 2.0
 - change to autotools
07070100000006000081A4000000000000000000000001663B317D00000533000000000000000000000000000000000000002300000000microos-tools-2.19+git19/README.md# MicroOS Tools
Files and scripts for openSUSE MicroOS

## /tmp on tmpfs with noexec flag

MicroOS will use tmpfs for /tmp with noexec flag set in the future.
For this reasons, salt-minion will write it's temporary files into
/run/salt-tmp.
In general, daemons should use private disk space for their data
and not shared one in /tmp.

## SELinux

MicroOS has preliminary support for SELinux.
If the file `/etc/selinux/.autorelabel` exists, the dracut module
`98selinux-microos` will label the root filesystem including
`/etc` and `/var`.

## locale-check

MicroOS supports only a limited number of locales (C, C.utf8, en_US.utf8,
POSIX). If you login via SSH, the locale settings will be verified that
they exist on this system. If not, locale is reset to the system default.

## systemd services

### setup-systemd-proxy-env.service

The `setup-systemd-proxy-env.service` makes the proxy variables from
`/etc/sysconfig/proxy` available to all systemd units.

### printenv.service

The `printenv.service` is to debug which environment variables exist
by default. It just calls `printenv`.

## development tools

* microos-rw: switches the root file system to read-write
* microos-ro: resets btrfs property to read-only again.
* rpmorphan: display files not owned by rpm
* rpm-sortbysize: list all installed packages sorted by size
07070100000007000081ED000000000000000000000001663B317D00000091000000000000000000000000000000000000002400000000microos-tools-2.19+git19/autogen.sh#!/bin/sh -x

rm -fv ltmain.sh config.sub config.guess config.h.in
aclocal 
automake --add-missing --copy --force
autoreconf
chmod 755 configure
07070100000008000081A4000000000000000000000001663B317D00000507000000000000000000000000000000000000002600000000microos-tools-2.19+git19/configure.acdnl Process this file with autoconf to produce a configure script.
AC_INIT([microos-tools], [2.21])
AM_INIT_AUTOMAKE
AC_PREFIX_DEFAULT(/usr)

AC_SUBST(PACKAGE)
AC_SUBST(VERSION)

PKG_CHECK_VAR([systemdsystemunitdir], [systemd], [systemdsystemunitdir], [],
	[AC_MSG_ERROR([Could not determine value for 'systemdsystemunitdir' - is the 'systemd.pc' file installed?])])
PKG_CHECK_VAR([tmpfilesdir], [systemd], [tmpfilesdir], [],
        [AC_MSG_ERROR([Could not determine value for 'tmpfilesdir' - is the 'systemd.pc' file installed?])])
PKG_CHECK_VAR([systemdgeneratordir], [systemd], [systemdsystemgeneratordir], [],
        [AC_MSG_ERROR([Could not determine value for 'systemdsystemgeneratordir' - is the 'systemd.pc' file installed?])])
PKG_CHECK_VAR([dracutmodulesdir], [dracut], [dracutmodulesdir], [],
        [AC_MSG_ERROR([Could not determine value for 'dracutmodulesdir' - is the 'dracut.pc' file installed?])])
PKG_CHECK_MODULES([RPM], [rpm])

if test "${exec_prefix}" = "NONE"
then
  SYSCTLDIR=${prefix}/lib/sysctl.d
else
  SYSCTLDIR=${exec_prefix}/lib/sysctl.d
fi
AC_SUBST(SYSCTLDIR)

AC_PROG_CC
AC_PROG_INSTALL
AC_PROG_LN_S

AC_CONFIG_FILES([Makefile systemd-proxy-env/Makefile systemd-printenv/Makefile \
	tmpfs/Makefile selinux/Makefile \
	devel-tools/Makefile])
AC_OUTPUT
07070100000009000041ED000000000000000000000002663B317D00000000000000000000000000000000000000000000002500000000microos-tools-2.19+git19/devel-tools0707010000000A000081A4000000000000000000000001663B317D00000108000000000000000000000000000000000000003100000000microos-tools-2.19+git19/devel-tools/Makefile.amsystemddir = $(systemdsystemunitdir)

systemd_DATA = microos-ro.service
sbin_SCRIPTS = microos-rw microos-ro rpm-sortbysize sysext-add-debug
sbin_PROGRAMS = rpmorphan

rpmorphan_LDADD = $(RPM_LIBS)
rpmorphan_CFLAGS = $(RPM_CFLAGS)

EXTRA_DIST = $(SCRIPTS) $(DATA)
0707010000000B000081A4000000000000000000000001663B317D000000DA000000000000000000000000000000000000003000000000microos-tools-2.19+git19/devel-tools/microos-ro#!/bin/bash
btrfs prop set -t s / ro true
# can't do that, would remount all subvolumes :-(
#mount -o remount,ro /
systemctl disable --runtime microos-ro.service
systemctl unmask --runtime transactional-update.service
0707010000000C000081A4000000000000000000000001663B317D000000D3000000000000000000000000000000000000003800000000microos-tools-2.19+git19/devel-tools/microos-ro.service[Unit]
Description=Switch root FS to read-only again
Before=systemd-reboot.service
DefaultDependencies=no

[Service]
ExecStart=/usr/sbin/microos-ro
Type=oneshot

[Install]
WantedBy=reboot.target shutdown.target
0707010000000D000081A4000000000000000000000001663B317D00000167000000000000000000000000000000000000003000000000microos-tools-2.19+git19/devel-tools/microos-rw#!/bin/bash
# make sure we switch back to ro on shutdown
systemctl enable --runtime microos-ro.service
systemctl mask --runtime transactional-update.service
mount -o remount,rw /
btrfs prop set -t s / ro false
cat <<EOF
##########################
# Root FS switches to RW #
# Operating out of spec, #
#       be careful!      #
##########################
EOF
0707010000000E000081A4000000000000000000000001663B317D00000039000000000000000000000000000000000000003400000000microos-tools-2.19+git19/devel-tools/rpm-sortbysize#!/usr/bin/sh
rpm -qa --qf '%{SIZE} %{NAME}\n' | sort -n
0707010000000F000081A4000000000000000000000001663B317D00000FEC000000000000000000000000000000000000003100000000microos-tools-2.19+git19/devel-tools/rpmorphan.c/*
 Copyright (c) 2019,2020 SUSE LLC
 Author: Adam Majer

Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
 in the Software without restriction, including without limitation the rights
 to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 copies of the Software, and to permit persons to whom the Software is
 furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
 all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
*/

#include <rpm/rpmts.h>
#include <rpm/rpmdb.h>
#include <rpm/rpmlib.h>
#include <fcntl.h>
#include <rpm/rpmcli.h>
#include <rpm/header.h>
#include <rpm/rpmfiles.h>

#include <dirent.h>
#include <stdlib.h>
#include <string.h>

static int check_list(const char * const * known_list, size_t known_list_size, const char *p)
{
	int pos = known_list_size / 2;
	int top = known_list_size;
	int bot = 0;
	for (;;) {
		// fprintf(stderr, "checking vs: %s  @ %d\n", known_list[pos], pos);
		int c = strcmp(p, known_list[pos]);
		if (c == 0)
			return pos;

if (c < 0)
			top = pos;
		if (c > 0) {
			if (bot == pos)
				break;
			bot = pos;
		}

if (bot + (top - bot)/2 == pos)
			break;
		pos = bot + (top - bot)/2;
	}

return -1;
}

static void scan_subdirs(const char *dir, const char * const * filters,
                        const char ** known_list, size_t known_list_size)
{
	char fullpath[10240];
	DIR *d = opendir(dir);
	if (d == NULL)
		return;

struct dirent *e;
	while ((e = readdir(d)) != NULL) {
		if (strcmp(e->d_name, ".") == 0 || strcmp(e->d_name, "..") == 0)
			continue;

switch (e->d_type) {
		case DT_DIR:
		case DT_LNK:
		case DT_REG:
		{
			if (strlen(dir) + strlen(e->d_name) + 2 > 10240)
				abort();

strcpy(fullpath, dir);
			strcat(fullpath, "/");
			strcat(fullpath, e->d_name);

if (check_list(known_list, known_list_size, fullpath) == -1) {
				puts(fullpath);
			}

if (e->d_type == DT_DIR) {
				const char * const *f = filters;
				while (*f != NULL && strcmp(*f, fullpath) != 0) f++;
				if (*f == NULL)
					scan_subdirs(fullpath, filters, known_list, known_list_size);
			}
		}
		}
	}
	closedir(d);
}

static int str_sort(const void *a, const void *b)
{
	return strcmp(*(const char**)a, *(const char**)b);
}

int main()
{
	rpmcliConfigured();
	rpmts dbts = rpmtsCreate();
	if (!dbts) {
		printf("ERROR\n:");
		return -1;
	}

if (rpmtsOpenDB(dbts, O_RDONLY) != 0) {
		printf("BAD BAD\n");
		return -3;
	}

size_t paths_size = 1024 * 128, count = 0;
	char **known_paths = malloc(sizeof(char*) * paths_size);

rpmdbMatchIterator iter = rpmtsInitIterator(dbts, RPMDBI_PACKAGES, NULL, 0);
	Header hdr;
	while ((hdr = rpmdbNextIterator(iter)) != NULL) {
		rpmfiles files = rpmfilesNew(NULL, hdr, 0, 0);
		rpmfi fi = rpmfilesIter(files, 0);
		while (rpmfiNext(fi) >= 0) {
			if (count >= paths_size) {
				paths_size *= 2;
				known_paths = realloc(known_paths, sizeof(char*) * paths_size);
			}
			known_paths[count++] = strdup(rpmfiFN(fi));
		}
		rpmfiFree(fi);
		rpmfilesFree(files);
	}

// sort the known list
	qsort(known_paths, count, sizeof(char*), str_sort);

// Iterate over /usr (!/usr/local) and /lib, /lib64, /sbin
	// and find things not in the database
	const char *dirs[] = { "/usr", "/lib", "/lib64", "/sbin", NULL };
	const char *filter_dirs[] = { "/usr/local", NULL };

for (const char * const * dir = dirs; *dir != NULL; ++dir)
		scan_subdirs(*dir, filter_dirs, (const char**)known_paths, count);

return 0;
}

07070100000010000081ED000000000000000000000001663B317D000003FE000000000000000000000000000000000000003600000000microos-tools-2.19+git19/devel-tools/sysext-add-debug#!/bin/bash -e

if [ "$#" = 0 -o "$1" = "--help" ]; then
	echo "Usage: $0 PACKAGE..."
	echo "Downloads gdb and debuginfo for specified packages to /var/lib/extensions/"
	echo "Uses systemd-sysext(8) to temporarily overlay them into the system."
	exit 0
fi

pkgs=('gdb')
for i in "$@"; do
	if [ "${i%-debuginfo}" = "$i" ] && [ "${i%-debugsource}" = "$i" ]; then
		pkgs+=("$i-debuginfo" "$i-debugsource")
	else
		pkgs+=("$i")
	fi
done

. /usr/lib/os-release

ext_base=/var/lib/extensions/debug-"$VERSION_ID"
mkdir -p "$ext_base/download"

echo "getting ${pkgs[@]}"
zypper --pkg-cache-dir="$ext_base/download" --plus-content debug in --dry-run --download-only "${pkgs[@]}"

while read pkg; do
	echo "adding ${pkg##*/}"
	rpm2cpio "$pkg" | cpio -idD "$ext_base"
	rm "$pkg"
done < <(find "$ext_base/download" -type f -name '*.rpm')

mkdir -p "$ext_base"/usr/lib/extension-release.d
cat > "$ext_base"/usr/lib/extension-release.d/extension-release.debug-"$VERSION_ID" <<EOF
ID=$ID
VERSION_ID=$VERSION_ID
EOF

systemd-sysext merge
07070100000011000081ED000000000000000000000001663B317D000003B4000000000000000000000000000000000000002400000000microos-tools-2.19+git19/man-online#!/bin/bash -e

section=

helpandquit()
{
      cat <<-EOF
	  Usage: $0 [man options] [[section] page ...] ...

OPTIONS:
	    -h, --help       help screen
	EOF
    exit 0
}

cleanup()
{
    [ -z "$tmpdir" ] || rm -rf "$tmpdir"
}

show()
{
    local topic="${1:?}"
    if ! curl -s -f -o "$tmpdir/$topic".gz -f -L https://manpages.opensuse.org/"$topic${section:+.}$section".gz; then
	echo "Failed to fetch $topic" >&2
	return 0
    fi
    mandoc -l "$tmpdir/$topic.gz"
}

getopttmp=$(getopt -o hs: --long help -n "${0##*/}" -- "$@")
eval set -- "$getopttmp"

while true ; do
    case "$1" in
	-h|--help) helpandquit ;;
	-s) section="$2"; shift 2 ;;
	--) shift ; break ;;
	*) echo "Internal error!" ; exit 1 ;;
    esac
done

[ -z "$1" ] && helpandquit

tmpdir=$(mktemp -d -t addimageencryption.XXXXXX)
trap cleanup EXIT

if [ -z "$section" ] && [ "${1/#[0-9]/}" != "$1" ]; then
    section="$1"
    shift
fi

for i in "$@"; do
    show "$i"
done
07070100000012000081A4000000000000000000000001663B317D00000081000000000000000000000000000000000000002700000000microos-tools-2.19+git19/man-online.sh# install alias if no local man is installed
if [ "$is" = 'bash' ] && ! type -P man >/dev/null; then
    alias man=man-online
fi
07070100000013000081A4000000000000000000000001663B317D00000D11000000000000000000000000000000000000002C00000000microos-tools-2.19+git19/microos-tools.spec#
# spec file for package microos-tools
#
# Copyright (c) 2023 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.

# Please submit bugfixes or comments via https://bugs.opensuse.org/
#

%{!?_distconfdir: %global _distconfdir %{_prefix}%{_sysconfdir}}

Name:           microos-tools
Version:        2.21+git0
Release:        0
Summary:        Files and Scripts for openSUSE MicroOS
License:        GPL-2.0-or-later
Group:          Development/Tools/Other
URL:            https://github.com/openSUSE/microos-tools
Source:         microos-tools-%{version}.tar.xz
BuildRequires:  automake
BuildRequires:  distribution-release
BuildRequires:  pkgconfig
BuildRequires:  pkgconfig(dracut)
BuildRequires:  pkgconfig(rpm)
BuildRequires:  pkgconfig(systemd)
Requires:       read-only-root-fs
# for man-online
Requires:       mandoc-bin

%description
Files, scripts and directories for openSUSE MicroOS.

%package -n microos-devel-tools
Summary:        Tools to develop MicroOS

%description -n microos-devel-tools
This package contains tools to make developing of MicroOS easier.

%prep
%autosetup -p1

%build
./autogen.sh
%configure
%make_build

%install
%make_install

%pre
%service_add_pre setup-systemd-proxy-env.service setup-systemd-proxy-env.path printenv.service

%post
%{regenerate_initrd_post}
%service_add_post setup-systemd-proxy-env.service setup-systemd-proxy-env.path printenv.service

%preun
%service_del_preun setup-systemd-proxy-env.service setup-systemd-proxy-env.path printenv.service

%postun
%{regenerate_initrd_post}
%service_del_postun setup-systemd-proxy-env.service setup-systemd-proxy-env.path printenv.service

%posttrans
%{regenerate_initrd_posttrans}

%pre -n microos-devel-tools
%service_add_pre microos-ro.service

%post -n microos-devel-tools
%service_add_post microos-ro.service

%preun -n microos-devel-tools
%service_del_preun microos-ro.service

%postun -n microos-devel-tools
%service_del_postun microos-ro.service

%files
%license COPYING
%dir %{_sysconfdir}/selinux
%config %{_sysconfdir}/selinux/fixfiles_exclude_dirs
%{_unitdir}/printenv.service
%{_unitdir}/setup-systemd-proxy-env.path
%{_unitdir}/setup-systemd-proxy-env.service
%dir %{_unitdir}/salt-minion.service.d
%{_unitdir}/salt-minion.service.d/TMPDIR.conf
%{_tmpfilesdir}/salt-minion-tmpdir.conf
%dir %{_distconfdir}/tukit.conf.d
%{_distconfdir}/tukit.conf.d/salt-tukit.conf
%{_sbindir}/setup-systemd-proxy-env
%dir %{_prefix}/lib/dracut
%dir %{_prefix}/lib/dracut/modules.d
%{_prefix}/lib/dracut/modules.d/98selinux-microos
%{_systemdgeneratordir}/selinux-autorelabel-generator
%{_bindir}/man-online
%{_distconfdir}/profile.d/man-online.sh

%files -n microos-devel-tools
%{_unitdir}/microos-ro.service
%{_sbindir}/microos-ro
%{_sbindir}/microos-rw
%{_sbindir}/rpm-sortbysize
%{_sbindir}/rpmorphan
%{_sbindir}/sysext-add-debug

%changelog
07070100000014000041ED000000000000000000000003663B317D00000000000000000000000000000000000000000000002100000000microos-tools-2.19+git19/selinux07070100000015000041ED000000000000000000000002663B317D00000000000000000000000000000000000000000000003300000000microos-tools-2.19+git19/selinux/98selinux-microos07070100000016000081ED000000000000000000000001663B317D00000118000000000000000000000000000000000000004300000000microos-tools-2.19+git19/selinux/98selinux-microos/module-setup.sh#!/bin/bash

# called by dracut
check() {
    test -f /etc/selinux/config || return 1
    return 0
}

# called by dracut
depends() {
    return 0
}

# called by dracut
install() {
    inst_hook pre-pivot 50 "$moddir/selinux-microos-relabel.sh"
    inst_multiple chroot cut grep
}
07070100000017000081ED000000000000000000000001663B317D000010C8000000000000000000000000000000000000004E00000000microos-tools-2.19+git19/selinux/98selinux-microos/selinux-microos-relabel.sh#!/bin/sh
type ismounted > /dev/null 2>&1 || . /lib/dracut-lib.sh

# In this mode, the zipl initrd uses grub2-emu to kexec the real kernel
# and initrd. Don't run there, only in the real initrd (s.a. bsc#1218065).
if getargbool 0 'initgrub'; then
    # This script gets sourced, so must use return here instead of exit
    return 0
fi

rd_is_selinux_enabled()
{
    # If SELinux is not enabled exit now
    grep -qw selinux /sys/kernel/security/lsm || return 1

SELINUX="enforcing"
    [ -e "$NEWROOT/etc/selinux/config" ] && . "$NEWROOT/etc/selinux/config"

if [ "$SELINUX" = "disabled" ]; then
        return 1;
    fi
    return 0
}

rd_microos_relabel()
{
    info "SELinux: relabeling root filesystem"

# If this doesn't exist because e.g. it's not mounted yet due to a bug
    # (boo#1197309), the exclusion is ignored. If it gets mounted during
    # the relabel, it gets wrong labels assigned.
    if ! [ -d "$NEWROOT/var/lib/overlay" ]; then
        warn "ERROR: /var/lib/overlay doesn't exist - /var not mounted (yet)?"
        return 1
    fi

# Use alternate mount point to prevent overwriting subvolume options (bsc#1186563)
    ROOT_SELINUX="${NEWROOT}-selinux"
    mkdir -p "${ROOT_SELINUX}"
    # Don't let mounts propagate into other namespaces
    mount --bind --make-private "${ROOT_SELINUX}" "${ROOT_SELINUX}"
    mount --rbind --make-rslave "${NEWROOT}" "${ROOT_SELINUX}"
    ret=0
    for sysdir in /proc /sys /dev; do
        # Don't let recursive umounts propagate into the bind source
        if ! mount --rbind --make-rslave "${sysdir}" "${ROOT_SELINUX}${sysdir}" ; then
            warn "ERROR: mounting ${sysdir} failed!"
            ret=1
        fi
    done
    if [ $ret -eq 0 ]; then
        info "SELinux: mount root read-write and relabel"
        mount -o remount,rw "${ROOT_SELINUX}"
        oldrovalue="$(btrfs prop get "${ROOT_SELINUX}" ro | cut -d= -f2)"
        btrfs prop set "${ROOT_SELINUX}" ro false
        FORCE=
        [ -e "${ROOT_SELINUX}"/etc/selinux/.autorelabel ] && FORCE="$(cat "${ROOT_SELINUX}"/etc/selinux/.autorelabel)"
        . "${ROOT_SELINUX}"/etc/selinux/config
        # Marker when we had relabelled the filesystem. This is relabelled as well.
        > "${ROOT_SELINUX}"/etc/selinux/.relabelled
        LANG=C chroot "$ROOT_SELINUX" /sbin/setfiles $FORCE -e /var/lib/overlay -e /proc -e /sys -e /dev -e /etc "/etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts" $(chroot "$ROOT_SELINUX" cut -d" " -f2 /proc/mounts)
        # On overlayfs, st_dev isn't consistent so setfiles thinks it's a different mountpoint, ignoring it.
        # st_dev changes also on copy-up triggered by setfiles itself, so the only way to relabel properly
        # is to list every file explicitly.
        # That's not all: There's a kernel bug that security.selinux of parent directories is lost on copy-up (bsc#1210690).
        # Work around that by visiting children first and only then the parent directories.
        LANG=C chroot "$ROOT_SELINUX" find /etc -depth -exec /sbin/setfiles $FORCE "/etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts" \{\} +
        btrfs prop set "${ROOT_SELINUX}" ro "${oldrovalue}"
    fi

umount -R "${ROOT_SELINUX}"
    # In some versions of util-linux, ^ does not umount stacked mounts
    # (https://github.com/util-linux/util-linux/issues/2551)
    # so take care of the private bind on itself separately:
    if ismounted "${ROOT_SELINUX}"; then
        umount "${ROOT_SELINUX}"
    fi

return $ret
}

if test -e "$NEWROOT"/.autorelabel -a "$NEWROOT"/.autorelabel -nt "$NEWROOT"/etc/selinux/.relabelled ; then
    cp -a "$NEWROOT"/.autorelabel "$NEWROOT"/etc/selinux/.autorelabel
    rm -f "$NEWROOT"/.autorelabel 2>/dev/null
fi

if rd_is_selinux_enabled; then
    if test -f "$NEWROOT"/etc/selinux/.autorelabel; then
        rd_microos_relabel
    elif getarg "autorelabel" > /dev/null; then
        rd_microos_relabel
    fi
elif test -e "$NEWROOT"/etc/selinux/.relabelled; then
    # SELinux is off but looks like some labeling took place before.
    # So probably a boot with manually disabled SELinux. Make sure
    # the system gets relabelled next time SELinux is on.
    > "$NEWROOT"/etc/selinux/.autorelabel
    warn "SElinux is off in labelled system!"
fi

return 0
07070100000018000081A4000000000000000000000001663B317D0000013A000000000000000000000000000000000000002D00000000microos-tools-2.19+git19/selinux/Makefile.ammodulesdir = @dracutmodulesdir@/98selinux-microos
selinuxdir = @sysconfdir@/selinux

modules_SCRIPTS = 98selinux-microos/selinux-microos-relabel.sh \
	98selinux-microos/module-setup.sh

selinux_DATA = fixfiles_exclude_dirs

systemdgenerator_SCRIPTS = selinux-autorelabel-generator

EXTRA_DIST = $(SCRIPTS) $(DATA)
07070100000019000081A4000000000000000000000001663B317D00000011000000000000000000000000000000000000003700000000microos-tools-2.19+git19/selinux/fixfiles_exclude_dirs/var/lib/overlay
0707010000001A000081ED000000000000000000000001663B317D000007EB000000000000000000000000000000000000003F00000000microos-tools-2.19+git19/selinux/selinux-autorelabel-generator#!/bin/sh
set -e

# This systemd.generator(7) detects if SELinux is running and if the
# user requested an autorelabel. If so, services will be enabled to
# run after subvolumes and partitions are mounted before local-fs.target
# is reached.

# If invoked with no arguments (for testing) write to /tmp.
generatordir="/tmp"
if [ -n "$1" ]; then
    generatordir="$1"
fi

enable_units() {
    mkdir -p "${generatordir}"/local-fs.target.requires

relabel_unit_list=""

for realdir in "/.snapshots" "/home" "/opt" "/root" "/srv" "/usr/local" \
		"/boot/grub2/i386-pc" "/boot/grub2/x86_64-efi" \
		"/boot/grub2/arm64-efi" "/boot/writable"; do
        # Make sure the directory exist, else we create
        # services for non existing mount points
        test -d "${realdir}" || continue
	mountunit=$(systemd-escape --path ${realdir})
	unitfile="${mountunit}-relabel.service"
	relabel_unit_list="$unitfile $relabel_unit_list"

opts=""
	[ "${realdir}" == "/.snapshots" ] && opts="-x"

cat >"${generatordir}/${unitfile}" <<-EOF
		[Unit]
		Description=Relabel ${realdir}
		DefaultDependencies=no
		RequiresMountsFor=${realdir}
		Before=local-fs.target
		ConditionSecurity=selinux

[Service]
		Type=oneshot
		ExecStart=/sbin/restorecon -R ${opts} ${realdir}
	EOF

ln -sf ../"${unitfile}" "${generatordir}"/local-fs.target.requires/"${unitfile}"
    done

unitfile="mark-autorelabel-done.service"
    cat >"${generatordir}/${unitfile}" <<-EOF
	[Unit]
	Description=Mark autorelabel as done
	DefaultDependencies=no
	Before=local-fs.target
	After=${relabel_unit_list}
	Requires=${relabel_unit_list}
	ConditionSecurity=selinux
	ConditionPathExists=/etc/selinux/.autorelabel

[Service]
	Type=oneshot
	ExecStart=/usr/bin/rm /etc/selinux/.autorelabel
EOF

ln -sf "../${unitfile}" "${generatordir}/local-fs.target.requires/${unitfile}"
}

if [ -x /usr/sbin/selinuxenabled ] && /usr/sbin/selinuxenabled; then
    if [ -f /etc/selinux/.autorelabel ] || grep -wq autorelabel /proc/cmdline; then
        enable_units
    fi
fi
0707010000001B000041ED000000000000000000000002663B317D00000000000000000000000000000000000000000000002A00000000microos-tools-2.19+git19/systemd-printenv0707010000001C000081A4000000000000000000000001663B317D0000005C000000000000000000000000000000000000003600000000microos-tools-2.19+git19/systemd-printenv/Makefile.amsystemddir = $(systemdsystemunitdir)

systemd_DATA = printenv.service

EXTRA_DIST = $(DATA)
0707010000001D000081A4000000000000000000000001663B317D0000009B000000000000000000000000000000000000003B00000000microos-tools-2.19+git19/systemd-printenv/printenv.service[Unit]
Description=Print systemd environment
Wants=local-fs.target

[Service]
Type=oneshot
ExecStart=/usr/bin/printenv

[Install]
WantedBy=default.target

0707010000001E000041ED000000000000000000000002663B317D00000000000000000000000000000000000000000000002B00000000microos-tools-2.19+git19/systemd-proxy-env0707010000001F000081A4000000000000000000000001663B317D000000BA000000000000000000000000000000000000003700000000microos-tools-2.19+git19/systemd-proxy-env/Makefile.amsystemddir = $(systemdsystemunitdir)

sbin_SCRIPTS = setup-systemd-proxy-env
systemd_DATA = setup-systemd-proxy-env.path setup-systemd-proxy-env.service

EXTRA_DIST = $(DATA) $(SCRIPTS)
07070100000020000081ED000000000000000000000001663B317D000007B5000000000000000000000000000000000000004300000000microos-tools-2.19+git19/systemd-proxy-env/setup-systemd-proxy-env#!/bin/bash

# Look at /etc/sysconfig/proxy and make the proxy configuration
# available as environment variable in systemd services

CFG=/etc/sysconfig/proxy
SYSTEMD_CFG=/etc/systemd/system.conf.d/proxy.conf

test -f ${CFG} || exit 0

DefaultEnvironment=""

while read line ; do
    case "$line" in
        \#*|"") continue ;;
    esac
    eval val=${line#*=}
    test -z "$val" && continue
    case "$line" in
        PROXY_ENABLED=*)
	    test "$val" = "yes" && continue
	    if [ -f $SYSTEMD_CFG ]; then
		rm $SYSTEMD_CFG
		systemctl daemon-reload
	    fi
	    exit 0
	    ;;
        HTTP_PROXY=*)
            DefaultEnvironment="$DefaultEnvironment \"HTTP_PROXY=${val}\" \"http_proxy=${val}\""
            ;;
        HTTPS_PROXY=*)
	    DefaultEnvironment="$DefaultEnvironment \"HTTPS_PROXY=${val}\" \"https_proxy=${val}\""
            ;;
        FTP_PROXY=*)
	    DefaultEnvironment="$DefaultEnvironment \"FTP_PROXY=${val}\" \"ftp_proxy=${val}\""
            ;;
        GOPHER_PROXY=*)
	    DefaultEnvironment="$DefaultEnvironment \"GOPHER_PROXY=${val}\" \"gopher_proxy=${val}\""
            ;;
        SOCKS_PROXY=*)
	    DefaultEnvironment="$DefaultEnvironment \"SOCKS_PROXY=${val}\" \"socks_proxy=${val}\""
            ;;
        SOCKS5_SERVER=*)
	    DefaultEnvironment="$DefaultEnvironment \"SOCKS5_SERVER=${val}\" \"socks5_server=${val}\""
            ;;
        NO_PROXY=*)
	    DefaultEnvironment="$DefaultEnvironment \"NO_PROXY=${val}\" \"no_proxy=${val}\""
            ;;
    esac
done < $CFG

test -z "$DefaultEnvironment" && exit 0

if [ ! -d /etc/systemd/system.conf.d ]; then
    mkdir -p /etc/systemd/system.conf.d || exit 1
fi

TMPCFGFILE=`mktemp ${SYSTEMD_CFG}.XXXXXXXXXX` || exit 1
echo -e "[Manager]\nDefaultEnvironment=${DefaultEnvironment}" > ${TMPCFGFILE}
cmp -s ${TMPCFGFILE} ${SYSTEMD_CFG}
if [ $? -ne 0 ]; then
    chmod 0644 ${TMPCFGFILE}
    mv ${TMPCFGFILE} ${SYSTEMD_CFG}
    systemctl daemon-reload
else
    rm -f $TMPCFGFILE
fi

exit 0
07070100000021000081A4000000000000000000000001663B317D000000C4000000000000000000000000000000000000004800000000microos-tools-2.19+git19/systemd-proxy-env/setup-systemd-proxy-env.path[Unit]
Description=Watch for changes in proxy configuration
After=local-fs.target

[Path]
Unit=setup-systemd-proxy-env.service
PathChanged=/etc/sysconfig/proxy

[Install]
WantedBy=default.target

07070100000022000081A4000000000000000000000001663B317D000000C5000000000000000000000000000000000000004B00000000microos-tools-2.19+git19/systemd-proxy-env/setup-systemd-proxy-env.service[Unit]
Description=Update system wide proxy setup for systemd services
Wants=local-fs.target

[Service]
Type=oneshot
ExecStart=/usr/sbin/setup-systemd-proxy-env

[Install]
WantedBy=default.target

07070100000023000041ED000000000000000000000003663B317D00000000000000000000000000000000000000000000001F00000000microos-tools-2.19+git19/tmpfs07070100000024000081A4000000000000000000000001663B317D00000113000000000000000000000000000000000000002B00000000microos-tools-2.19+git19/tmpfs/Makefile.amsaltminiondir = $(systemdsystemunitdir)/salt-minion.service.d
tukitconfdir = $(prefix)$(sysconfdir)/tukit.conf.d

tmpfiles_DATA = salt-minion/salt-minion-tmpdir.conf
saltminion_DATA = salt-minion/TMPDIR.conf
tukitconf_DATA = salt-minion/salt-tukit.conf

EXTRA_DIST = $(DATA)
07070100000025000041ED000000000000000000000002663B317D00000000000000000000000000000000000000000000002B00000000microos-tools-2.19+git19/tmpfs/salt-minion07070100000026000081A4000000000000000000000001663B317D0000002E000000000000000000000000000000000000003700000000microos-tools-2.19+git19/tmpfs/salt-minion/TMPDIR.conf[Service]
Environment="TMPDIR=/run/salt-tmp/"
07070100000027000081A4000000000000000000000001663B317D0000001F000000000000000000000000000000000000004300000000microos-tools-2.19+git19/tmpfs/salt-minion/salt-minion-tmpdir.confd /run/salt-tmp 0750 root root
07070100000028000081A4000000000000000000000001663B317D0000002F000000000000000000000000000000000000003B00000000microos-tools-2.19+git19/tmpfs/salt-minion/salt-tukit.confBINDDIRS["salt-minion-tmpdir"]="/run/salt-tmp"
07070100000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000B00000000TRAILER!!!102 blocks

Places

File _service:obs_scm:microos-tools-2.19+git19.obscpio of Package microos-tools

Places