Sign Up
Log In
Log In
or
Sign Up
Places
All Projects
Status Monitor
Collapse sidebar
SUSE:SLE-15-SP3:GA
fwupd.28660
fwupd.changes
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File fwupd.changes of Package fwupd.28660
------------------------------------------------------------------- Tue Mar 30 02:40:43 UTC 2021 - Gary Ching-Pang Lin <glin@suse.com> - Update to version 1.2.14: (jsc#SLE-16809, bsc#1182057) * Release fwupd 1.2.14 * Fix using a very new libxmlb with a very old fwupd daemon * uefi-capsule: Specify the section flags for .sbat * uefi-capsule: Ensure SBAT metadata is added correctly * uefi-capsule: Set the component generation to 1 * uefi-capsule: Include all the sections when using objcopy * Allow building without SBAT metadata * uefi-capsule: Fix objcopy failing to add a .sbat section on aarch64 * uefi-capsule: Add SBAT metadata to the fwupd EFI binary * uefi: add configuration option for objcopy utility. * uefi: Make generate_binary.sh more robust * efi: use a wildcard section copy for final EFI generation * Fix the DeviceID set by GetDetails * synaptics-prometheus: Force the minor version from 0x02 to 0x01 to make sure the devices can be updated back to 0x01. * Validate that gpgme_op_verify_result() returned at least one signature (boo#1172643 CVE-2020-10759) * trivial: uefi: fix dell TPM updates * prevent updates to occur via synaptics-mst plugin * upower: Decrease minimum battery requirement to 10% * src: fu-engine: check version was updated by checking version * Correctly import PKCS-7 remote metadata * Disable the battery percentage checks if UPower is unavailable * efi: use a wildcard section copy for final EFI generation * fu-engine: Read all releases and convert versions when comparing * Do not do semver conversion in fu_common_vercmp() * unifying: use the correct timeout for IO channel writes * Only check the vendor ID if the device has one set * wacom-raw: Correct HWID support * modem-manager: increase re-enumeration delay to 20000ms * modem-manager: add counterpart GUID for the DW5821e/eSIM * usb: make loading vendor/product/serial strings non-fatal * Strip trailing whitespace from USB descriptors * udev-device: fix offset of vendor id of hidraw devices * thunderbolt-power: avoid checking for bolt support * modem-manager: Fix a tiny memory leak when starting the daemon * Fix usage of incorrect type for return value * fu-common: Use environment variables for systemd managed directories * Use more systemd directives for directories - Specify the SBAT metadata (bsc#1182057) - Drop upstreamed patch: CVE-2020-10759.patch ------------------------------------------------------------------- Mon Sep 7 08:25:54 UTC 2020 - QK ZHU <qkzhu@suse.com> - Add fwupd-jscSLE-11766-close-efidir-leap-gap.patch: Set SLE and openSUSE esp os dir at runtime (jsc#SLE-11766) - Drop build option -Defi_os_dir="%{efidir}": with the above patch fwupd can detect esp os dir dynamically - Update the efidir related %post and %postun scripts in spec file ------------------------------------------------------------------- Tue Jun 9 21:14:55 UTC 2020 - Michael Gorse <mgorse@suse.com> - Add CVE-2020-10759.patch: check for a valid gpg signature (boo#1172643 CVE-2020-10759). ------------------------------------------------------------------- Thu Nov 21 13:39:25 UTC 2019 - Frederic Crozat <fcrozat@suse.com> - Ensure /var/cache/fwupd is created and owned by package, required when StateDirectory is not set for systemd service. ------------------------------------------------------------------- Thu Nov 14 08:35:41 UTC 2019 - glin@suse.com - Update to version 1.2.11 (jsc#SLE-10751): * synapticsmst: Use a more suitable icon for the device * thunderbolt: Fix logic to work properly with ICL thunderbolt controller * Do not ask the user to upload a report if ReportURI is not set * Do not crash when starting tpm2-abrmd * fu-history: Update device_modified in sql database during updates * synaptics-prometheus: Fix tiny memory leak when using FuSynapromConfig * Remove replug flag after the device comes back from reboot * uefi: add support for tpm2-tools 4.X * fu-engine/fu-config: Reload metadata store when configuration changes * unifying: update Solaar url * synapticsmst: Add a SynapticsMSTBoardID for another Lenovo dock * synapticsmst: Add a SynapticsMSTBoardID for a Lenovo dock * synapticsmst: Display the board ID in non-hex form in the error message * Be more accepting when trying to recover a failed database migration * modem-manager: add counterpart GUID for the DW5821e * fu-tool: Port ability to update a single device from fwupdmgr * uefi: Actually write the new device path if different than before * Fix a crash when stopping the fwupd service * Relax the certificate time checks in the self tests for the legacy certificate * Never show AppStream markup on the console * Do not segfault when trying to quit the downgrade selection * Allow specifying <firmware>GUID</firmware> to check any version exists - Add fwupd-bsc1130056-change-shim-path.patch to set the default shim binary for openSUSE/SLE (bsc#1130056) - Add fwupd-bsc1143905-hash-the-source-files.patch to hash the source files instead of libfwupdprivate.a to avoid the checksum change due to the random naming LTO profile sections (bsc#1143905) - Mark fwupdate as obsolete + fwupdate has been merged into fwupd since fwupd 1.1.0. ------------------------------------------------------------------- Fri Sep 21 08:00:53 UTC 2018 - fezhang@suse.com - Update to version 1.0.9 (FATE#326702): + New Features: - Add support for more Wacom tablets. - Add support for the Synaptics Panamera chip. - Add validation for Titan Ridge Thunderbolt devices. - Use boltd force power API if available. + Bugfixes: - Allow flashing Unifying devices in recovery mode. - Allow updating just one specific device from the commandline. - Do not hold hidraw devices open forever. - Do not use 8bitdo bootloader commands after a successful flash. - Don't crash when the Dell alternate device has not been set. - Don't potentially expose user passwords for remotes. - Fix a potential buffer overflow when applying a DFU patch. - Fix a potential segfault in smbios data processing. - Fix downgrading older releases to devices. - Fix failure to detach Unifying devices when using a slow host controller. - Fix flashing devices that require a manual replug. - Handle -EAGAIN from the kernel better when reading NVM. - Drop enable_pkcs7_when_testing_only.patch: fixed upstream. ------------------------------------------------------------------- Mon Sep 10 11:45:07 UTC 2018 - Jan Engelhardt <jengelh@inai.de> - Use noun phrase for summary. Trim request for comments from description. ------------------------------------------------------------------- Wed Jul 25 09:23:22 UTC 2018 - tchvatal@suse.com - Run %udev_rules_update in post as package install udev rules ------------------------------------------------------------------- Wed Jul 11 14:30:15 UTC 2018 - oliver@getspam.de - Update to version 1.0.8: + New Features (including version 1.0.7): - Add an plugin to update some future Wacom tablets - Add 'fwupdmgr get-topology' to show logical device tree - Add support for creating a flatpak - Add support for creating a snap - Add support for Motorola S-record files - Add the Linux Foundation public GPG keys for firmware and metadata - Show a translated warning when the server is limiting downloads - Add enable-remote and disable-remote commands to fwupdmgr - Add fu_plugin_add_compile_version() for libraries to use - Allow requiring specific versions of libraries for firmware updates - If no remotes are enabled try to enable the LVFS - Show a warning with interactive prompt when enabling a remote + Bugfixes (including version 1.0.7): - Add a firmware diagnostic tool called fwupdtool - Adjust all licensing to LGPL 2.1+ - Allow installing more than one firmware using 'fwupdmgr install' - Allow specifying hwids with OR relationships - Do not call fu_plugin_init() on blacklisted plugins - Do not require libcolorhug to build - Fix a crash in libfwupd where no device ID is set - Fix a potential DoS in libdfu by limiting holes to 1MiB - Fix a segfault that sometimes occurs during cleanup of USB plugins - Fix Hardware-ID{0,1,2,12} compatibility with Microsoft - Hide devices that aren't updatable by default in fwupdmgr - Search all UEFI GUIDs when matching hardware - Stop matching Nintendo Switch Pro in the 8bitdo plugin - Check that EFI system partition is mounted before update - Disable synapticsmst remote control on failure - Don't recoldplug thunderbolt to fix a flashing failure - Fix SQL error when running 'fwupdmgr clear-offline' - Improve the update report message - Only enumerate Dell Docks if the type is known - Only run certtool if a new enough gnutls is present - Prevent a client crash if the daemon somehow sends invalid data - Reboot after scheduling using logind not systemd - Use the right encoding for the label in make-images - Added/backported enable_pkcs7_when_testing_only.patch: + needed to disable pkcs7 test during build (can be removed for fwupd >= 1.0.9) ------------------------------------------------------------------- Wed Apr 4 09:43:55 UTC 2018 - dimstar@opensuse.org - Update hasbang in installed files from /usr/bin/env python3 to /usr/bin/python3. ------------------------------------------------------------------- Tue Apr 3 13:14:02 UTC 2018 - mpluskal@suse.com - Update url - Small packaging cleanup with spec-cleaner ------------------------------------------------------------------- Fri Mar 23 20:06:34 UTC 2018 - antoine.belvire@opensuse.org - Update to version 1.0.6: + New Features: - Add bash completion for fwupdmgr. - Add support for newest Thunderbolt chips. - Allow all functions that take device arguments to be prompted. - Allow devices to use the runtime version when in bootloader mode. - Allow overriding ESP mount point via conf file. - Delete any old fwupdate capsules and efivars when launching fwupd. - Generate Vala bindings. + Bugfixes: - Allow ctrl-d out of the prompt for devices. - Allow to create package out of provided binary. - Correct handling of unknown Thunderbolt devices. - Correctly detect new remotes that are manually copied. - Fix a crash related to when passing device to downgrade in CLI. - Fix running the self tests when no fwupd is installed. - Fix Unifying signature writing and parsing for Texas bootloader. - Only send success and failure reports to the server. - Use a CNAME to redirect to the correct CDN for metadata. - Use a longer timeout when powering back the Thunderbolt device. - Add pkgconfig(bash-completion) BuildRequires: new dependency. ------------------------------------------------------------------- Thu Mar 15 13:14:55 UTC 2018 - fcrozat@suse.com - Ensure library package has a dependency on main package, otherwise it won't be usable. ------------------------------------------------------------------- Mon Mar 05 20:31:46 UTC 2018 - dimstar@opensuse.org - Update to version 1.0.5: + New Features: - Offer to reboot when processing an offline update. - Report the efivar, libsmbios and fwupdate library versions. - Report Thunderbolt safe mode and SecureBoot status. - Show the user a URL when they report a known problem. - Support split cabinet archives as produced by Windows Update. + Bugfixes: - Be more careful deleting and modifying device history. - Clarify which devices don't have upgrades. - Ensure the Thunderbolt version is xx.yy. - Fix a daemon warning when using fwupdmgr get-results. - Fix crasher with MST flashing. - Fix DFU detach with newer releases of libusb. - Include the device VID and PID when generating the device-id. - Set the RemoteId when using GetDetails. - Stop matching 8bitdo DS4 controller VID/PID. - Use help2man for dfu-tool and drop docbook dependencies. - Use ngettext for any strings with plurals. - Use the default value if ArchiveSizeMax is unspecified. ------------------------------------------------------------------- Mon Mar 05 20:30:22 UTC 2018 - dimstar@opensuse.org - Update to version 1.0.4: + New Features: - Add D-Bus methods to get and modify the history information. - Allow the user to share firmware update success or failure. - Ask the user to refresh metadata when it is very old. - Store firmware update success and failure to a local database. + Bugfixes: - Add a device name for locked UEFI devices. - Allow each plugin to opt-in to the recoldplug action. - Fix firmware downloading using gnome-software. - Fix UX capsule reference to the one specified in efivar. - Never add two devices to the daemon with the same ID. - Rescan supported flags when refreshing metadata. - Add pkgconfig(json-glib-1.0) BuildRequires: new dependency. ------------------------------------------------------------------- Mon Mar 05 20:28:01 UTC 2018 - dimstar@opensuse.org - Update to version 1.0.3: + New Features: - Add a new plugin to add support for CSR "Driverless DFU". - Add initial SF30/SN30 Pro support. - Support AppStream metadata with relative <location> URLs. + Bugfixes: - Add more metadata to the user-agent string. - Block owned Dell TPM updates. - Choose the correct component from provides matches using requirements. - Do not try to parse huge compressed archive files. - Fix a double-free bug in the Udev code. - Handle Thunderbolt "native" mode. - Use the new functionality in libgcab >= 1.0 to avoid writing temp files. ------------------------------------------------------------------- Thu Dec 21 18:49:45 UTC 2017 - stefan.bruens@rwth-aachen.de - Unbreak compilation on non-x86, upstream renamed options to disable plugins. ------------------------------------------------------------------- Tue Dec 19 09:32:41 UTC 2017 - fcrozat@suse.com - Update to version 1.0.2: + Add a plugin for the Nitrokey Storage device + Add support for the original AVR DFU protocol + Allow different plugins to claim the same device + Allow quirks to set common USB properties + Move a common plugin functionality out to a new shared object + Optionally delay the device removal for better replugging + Set environment variables to allow easy per-plugin debugging + Use a SHA1 hash for the internal DeviceID + Add quirk for AT32UC3B1256 as used in the RubberDucky + Disable the dell plugin if libsmbios fails + Don't register for USB UDev events to later ignore them + Fix a possible buffer overflow when debugging ebitdo devices + Fix critical warning when more than one remote fails to load + Fix DFU attaching AVR32 devices like the XMEGA + Ignore useless Thunderbolt device types + Refactor ColorHug into a much more modern plugin + Release the Steelseries interface if getting the version failed + Remove autoconf-isms from the meson configure options + Show a nicer error message if the requirement fails + Sort the output of GetUpgrades correctly - Changes from version 1.0.1: + Add support for HWID requirements + Add support for programming various AVR32 and XMEGA parts using DFU + Add the various DFU quirks for the Jabra Speak devices + Allow specifying the output file type for 'dfu-tool read' + Move the database of supported devices out into runtime loaded files + Support the IHEX record type 0x05 + Use help2man to generate the man page at build time + Use the new quirk infrastructure for version numbers + Catch invalid Dell dock component requests + Correctly output Intel HEX files with > 16bit offset addresses + Do not try to verify the element write if upload is unsupported + Fix a double-unref when updating any 8Bitdo device + Fix crash when enumerating with Dell dock connected but with no UEFI + Fix uploading large firmware files over DFU + Format the BCD USB revision numbers correctly + Guess the DFU transfer size if it is not specified + Include the reset timeout as wValue to fix some DFU bootloaders + Make the error message clearer when sans fonts are missing + Support devices with truncated DFU interface data + Use the correct remote-specified username and passord when using fwupdmgr + Use the correct wDetachTimeOut when writing DFU firmware + Verify devices with legacy VIDs are actually 8Bitdo controllers - Add help2man as BuildRequires. ------------------------------------------------------------------- Thu Dec 14 18:40:06 UTC 2017 - stefan.bruens@rwth-aachen.de - Fix dependencies and build options for non-x86 architectures. At least FW updates for USB are arch independent, and EFI FW updates can also be applied on Aarch64. ------------------------------------------------------------------- Fri Oct 27 09:17:53 UTC 2017 - dimstar@opensuse.org - Update to version 1.0.0: * Add the plugin documentation to the main gtk-doc * Add a waiting-for-auth daemon state * Add fwupd_remote_get_checksum() to use in client programs * Generate the LD script from the GObject Introspection data * Prevent fwupd from mounting filesystems * uefi: Do not use system-specific infomation for PCI devices * uefi: Support uploading the firmware splash image * dell: only set coldplug delay when we know we need it * dell: only run SMI to toggle host MST GPIO on systems with host MST * dell: add functionality to blacklist HW with problems * dell: only run on intended chassis * thunderbolt-power: always run after thunderbolt plugin * Allow plugins to depend on each other * Add support for SMBIOSv3 * dell: prefer to use hwids to get DMI keys and DE table * debian: remove /etc/fwupd.conf on upgrade * unifying: Use fu_plugin_check_supported() * Add fu_plugin_check_supported() * unifying: Use a device whitelist to avoid breaking devices * Fix various printing issues with the progressbar * dell: Fix a trivial whitespace issue * Do not fail to load the daemon if cached metadata is invalid * Do not store the newest release as part of the FuDevice object * Add a method to return a list of upgrades for a specific device * Move the downgrade calculation to the daemon * Make FuDevice derive from FwupdDevice rather than FwupdResult * Add a command 'clear-offline' to fwupdmgr * Merge releases where multiple remotes provide the same firmware * Remove the UniqueID property * uefi: Do not set the release version * udev: Do not match USB devices, even with a GUID set * Use the intel-wmi-thunderbolt kernel module to force power * dell: drop thunderbolt force power code * unifying: Add hardcoded summaries for peripheral kinds * Create CODE_OF_CONDUCT.md * Ensure more devices set the device summary * Add an 'Summary' property to each device * Add a human-readable title for each remote * unifying: Disable if the kernel has no CONFIG_HIDRAW support * Move deprecated symbols to a new header * Introduce an s390x cross compile target to CI * Add ModifyRemote as an easy way to enable and disable remotes like the LVFS * Do not auto-open all USB devices at startup * dfu: Use FuDeviceLocker * unifying: Use FuDeviceLocker * colorhug: Use FuDeviceLocker * ebitdo: Use FuDeviceLocker * altos: Use FuDeviceLocker * steelseries: Use FuDeviceLocker * usb: Use FuDeviceLocker * Add FuDeviceLocker to simplify device open/close lifecycles * dfu: Remove DEVO support * dfu: Remove the now-unused symtab support * Remove the ELF support from libdfu and move the code to the altos plugin * Use -Werror when building in Travis CI * Do not install the libdfu helper library * Parse the SMBIOS DMI table directly * usb: Disable the fallback USB plugin * Test for missing language translations at build time * Fix the libdfu self test failure on s390 and ppc64 ------------------------------------------------------------------- Fri Oct 27 09:05:57 UTC 2017 - dimstar@opensuse.org - Update to version 0.9.8: * Add a command 'clear-offline' to fwupdmgr * Do not fail to load the daemon if cached metadata is invalid * Fix a crash when using fu_plugin_device_add_delay() * Fix the libdfu self test failure on s390 and ppc64 * Format the BCD USB revision numbers correctly * Never fallback to an offline update from client code * Prevent fwupd from mounting filesystems * dfu: Allow flashing when the target does not specify an alt-name * dfu: Do not try to verify the element write if upload is unsupported * dfu: Fix uploading large firmware files * dfu: Include the reset timeout as wValue to fix some hardware * dfu: Set the vendor ID to the runtime USB VID * dfu: Use 0x0101 as an alias for 0x0110 * thunderbolt: move test for mock environment (gh#hughsie/fwupd#280) * udev: Do not match USB devices, even with a GUID set * uefi: Do not set the release version * unifying: Disable if the kernel has no CONFIG_HIDRAW support ------------------------------------------------------------------- Tue Sep 19 13:45:59 UTC 2017 - dimstar@opensuse.org - Update to version 0.9.7: + 10 months worth of bugfixing, integrating more vendor specific Firmware update paths. ------------------------------------------------------------------- Thu Mar 02 21:23:17 UTC 2017 - dimstar@opensuse.org - Update to version 0.8.1: + Delete duplicate translations (gh#hughsie/fwupd#89). + Do not hardcode docbook2man path. + Fix fwupdmgr timeout with missing pending database. + Fix compiler warnings. + Fix a crash when enumerating devices on a Dell WLD15. + dell: don't initialize libsmbios on unsupported systems. + Do not fail to start on Dell hardware. + Adjust systemd confinement restrictions. + Do not dlclose modules when running under valgrind. + Really remove the NoNewPrivileges systemd confinement. + Release fwupd 0.8.1. ------------------------------------------------------------------- Mon Feb 27 12:24:39 UTC 2017 - mpluskal@suse.com - Update to version 0.8.0: + Show a different error when checking for updates while on + battery power (gh#hughsie/fwupd#68). + Clarify the test in --help and man page related to offline + (gh#hughsie/fwupd#69). + libdfu: Use a heuristic for the start address if the firmware + has no DfuSe footer. + dell: Don't return the address of a stack variable. + dell: Fix a possibly-impossible-to-hit buffer overrun. + close USB devices before error returns (gh#hughsie/fwupd#73). + Make libelf support optional. + Always make sure we're getting a C99 compiler. + Fix redeclaration of polkit autocleanup functions. + Uncomment SystemdService parameter in the dbus service file + (gh#hughsie/fwupd#74). + Make all providers and plugins share a GUsbContext. + Unexport libebitdo. + Move the plugins into plugin-specific directories. + Convert the providers to plugins to simplify code and for + future features. + Add support for Logitech Unifying devices. + Add a set of vfuncs that are run before and after a device + update. + Return the pending UEFI update when not on AC power. + Move the UPower functionality to a plugin. + Fix udev plugin loading. + fix dfu plugin loading. + Disable PrivateNetwork on systemd service. + Use more restrictive settings when running under systemd. + dell: add a new method for forcing a controller to flash mode. + Add VerifyUpdate to update the device checksums server-side. + Move the Option ROM parsing to the Udev plugin. + Move the device add delay to shared code. + Add initial skeleton for Intel Thunderbolt support. + unifying: Use the actual bootloader VID/PIDs when in firmware + mode. + Allow the metadata to match a version of fwupd and the existing + fw version. + Add fwupd_result_get_device_version_bootloader(). + Fix the appstream-glib version guards. + dell: Add coldplug methods to let other plugins turn on + TBT/GPIO. + libdfu: Don't read data from some DfuSe targets. + Add the ability to run a prepare->exec->cleanup on coldplug. + Allow plugins to request that all plugins re-coldplug. + thunderbolt: Detecting new devices and add an actual device to + the daemon. + Add support for flashing the ChaosKey. + thunderbolt: add some guards around empty arrays. + dell: Adjust the coldplug preparation and cleanup sequence. + dell: Fix possible linker problem. + Revert "thunderbolt: add some guards around empty arrays". + Add fu_plugin_set_coldplug_delay() to allow hardware to + initialize if required. + altos: Add error checking when using termios. + ebitdo: Subclass FuDevice like the altos plugin. + altos: Set the flags in the init_real so they work for the + cmdline tool. + unifying: Subclass FuDevice like the altos plugin. + Include all debug messages when run with --verbose. + dell: introduce a standalone (noinst) tool to force mode + flashes. + Introduce plugin for Synaptics MST hubs. + synapticsmst: Add cascade support. + Only register the D-Bus service when all devices have been + added. + synapticsmst: Refactor away the global state. + synapticsmst: fix cascade support in the plugin. + Updates for thunderbolt plugin. + thunderbolt: Add special handling for safe mode on Dell systems + (gh#hughsie/fwupd#84). + synapticsmst: Iterate all nodes rather than hardcoding to 3. + synapticsmst: build GUID using dock type. + Add a new function fu_dell_supported to fu-dell-common. + synapticsmst: add a test suite. + synapticsmst: Fix up some trivial whitespace issues. + Fix a refcounting issue in the udev plugin. - Add rpmlintrc untill security review is resolved ------------------------------------------------------------------- Mon Jan 30 10:13:01 UTC 2017 - zaitor@opensuse.org - Update to version 0.7.5: + Clean up PO files + Verify devices support updating in mode they are called. + Fix an assert when unlocking the dummy ESRT device + Don't create the UEFI dummy device if the unlock will happen on + next boot + dell: Match on TB16 as well + Fix a -fstack-protector-strong crash when uploading firmware + Enable the stack protection in local builds + dell: If running in test suite, don't try to get product ID + from sysfs + libfdfu: Show a warning when getting the alt-name failed + dfu: Fix listing devices using the ST reference bootloader + Show the nicely formatted target name for DfuSe devices + libdfu: Fix two possible critical warnings for corrupt USB + descriptors + libdfu: Correctly offset addresses when one zone has multiple + sectors + libdfu: Do not do GetStatus on dfuse upload + libdfu: Fix uploading from DfuSe devices + libdfu: Use the device offset when writing DfuSe firmware + libdfu: Add DfuAction enumerated value to represent a device + action + libdfu: Use an animated progress bar when performing DFU + operations + libdfu: Do not do a zero-byte download when in DfuSe mode + libdfu: Fix verification of written DfuSe firmware + libdfu: Ensure the device is open before claiming the interface + libdfu: Ensure the mode is set correctly when faking a runtime + libdfu: Re-get the quirks when the DfuDevice gets a new + GUsbDevice + libdfu: Add quirks for HydraBus as it does not have a DFU + runtime + libdfu: Match the device booloader or runtime VID and PID when + checking firmware + Add a 'replace-data' command to dfu-tool + string + libdfu: Add dfu_sector_get_zone() to get the continuous memory + zone number + libdfu: Wait for DNBUSY to be cleared when checking the DfuSe + status + libdfu: Correctly erase DfuSe devices + Enable hardening flags on more binaries + libdfu: Correctly set the element address when uploading from + DfuSe devices - Add pkgconfig(gmodule-2.0) BuildRequires: Align with what + configure checks for. - Add pkgconfig(libsmbios_c) BuildRequires: Support dell bios. + Unfortunatly, until we have fwup packaged and enabled, this will + not work. - Add disabled pkgconfig(libtbtfwu): For future thunderbolt + support. ------------------------------------------------------------------- Mon Jan 30 10:12:47 UTC 2017 - zaitor@opensuse.org - Update to version 0.7.4: + Add a fallback for older appstream-glib releases + Write the ELF files with the correct section type + Fix libfwupd self tests when a host-provided fwupd is not + available + Add dfu_firmware_add_symbol() + Add the Altos symbol table to the DfuFirmware + Use the symtab to set the VID/PID from Altos IHEX firmware + images + Show the human-readable version in the 'dfu-tool dump' output + Allow specifying the argument to 'dfu-tool set-release' in + major.minor format. + sections + Support writing the IHEX symbol table + call + Load the symbol table from ELF firmware + Load the Altos USB descriptor from ELF files + Add DFU_CIPHER_KIND_RSA + Fix a possible crash when uploading firmware files using libdfu ------------------------------------------------------------------- Mon Jan 30 10:12:28 UTC 2017 - zaitor@opensuse.org - Update to version 0.7.3: + build: Fix gtk-doc build when srcdir != builddir + In get-details output, display the blob filename + Ensure the update ID is set when getting local firmware details + Use a private gnupg key store + Add support for installing against multiple devices from a CAB + file + Use the correct firmware blob when installing a composite + device update + in get-details output, display update_name rather than Unknown + Device + statements + Don't make failures critical while checking versions or locked + state + Show a more detailed error when installing firmware on the + wildcard + Add Dell TPM and TB15/WD15 support via new Dell provider. + file + Allow blacklisting devices by their GUID + header file + Add XPS 9250 to Dell TPM modeswitch blacklist + Only display flashes left in results output when it gets low. + Add a small library for talking with 0bitdo hardware + Add another compile warning and fix up any build failures + Embed fwupd version in generated libfwupd and libdfu + documentation + Update fwupdmgr manpage for new commands and arguments + build: Fix gtk-doc build when srcdir != builddir + online not offline + Get the firmware version correctly from 0Bitdo gamepads + Switch to the Amazon S3 CDN for firmware metadata + Fix writing 8Bitdo device firmware + be updated + Show the vendor flashing instructions when installing + Split out the DFU file formats to separate files + Add fwupd_result_remove_device_flag() + Add FU_DEVICE_FLAG_NEEDS_BOOTLOADER + get-updates output + Allow providers to export percentage completion + Add fwupd_client_get_status() + Handle the 8Bitdo bootloader in a better way + Show a progress notification when installing firmware + Add fwupd_result_get_unique_id() + Use the SHA1 hash of the local file data as the component + origin + Use the correct define prefix for FwupdDeviceFlags + libdfu: Fix hang when parsing corrupt IHEX files + Add a set-target-size command to dfu-tool + Support the 'DEVO' cipher kind in libdfu + Add a set-address command to dfu-util + Disable the Dell specific code by default + Conditionally enable all providers based upon what's installed + Add a summary of providers that are enabled from configure + Do not use the deprecated GNOME_COMPILE_WARNINGS + Ignore devices that do not add at least one GUID + Do not attempt to add DFU devices not in runtime mode + Save the unique ID in the pending database + libdfu: Add initial ELF reading and writing support + Add dfu_firmware_format_from_string() + Normalize the DfuFirmwareFormat enums ------------------------------------------------------------------- Mon Jan 30 10:12:16 UTC 2017 - zaitor@opensuse.org - Update to version 0.7.2: + Allow devices to have multiple assigned GUIDs + Only return updatable devices from GetDevices() + Add fu_device_get_alternate() + Allow metainfo files to match only specific revisions of + devices + Re-read flags for a device after a provider's unlock routine is + done + Test for a locked device when trying to install firmware update + Enforce allowing providers to take away flash abilities + Support returning multiple GUIDs from GetDetails + Add a GetDetailsLocal() method to eventually replace + GetDetails() + break + libdfu: Add DfuVersion enumerated values + libdfu: Show the DFU protocol version in 'dfu-tool list' + Only claim the DFU interface when required ------------------------------------------------------------------- Mon Jan 30 10:11:59 UTC 2017 - zaitor@opensuse.org - Update to version 0.7.1: + Fix libdfu CRC check for big endian architectures + Add dfu_image_get_element_default() + Fix libdfu CRC check for big endian architectures + Fix big endian issues when reading and writing DFU and DfuSe + files + Remove non-interactive pinentry setting from fu-keyring + Set the system's DMI product name as the DisplayName for UEFI + Re-order output of get-devices to be easier to read + Make the device display name nicer + update version + Return all update descriptions newer than the installed version + Add summary and name field for Rival SteelSeries + Fix a critical warning when restarting the daemon + Add a 'supported' flag to the FuDevice + Add fwupd_client_connect() + Add a 'monitor' debugging command for fwupdmgr + Add device-added, device-removed and device-changed signals + Match the AppStream metadata after a device has been adedd + Re-match devices when the AppStream metadata is updated + Show 'Unknow Device' in fwupdmgr when a device name is not set + Set the device description when parsing local firmware files + Add support for a new device field "Flashes Left". + src/Makefile.am: reshuffle so enableable bits are only + referenced when on + Add support for a --force flag to override provider warnings ------------------------------------------------------------------- Mon Jan 30 10:11:48 UTC 2017 - zaitor@opensuse.org - Update to version 0.7.0: + Use g_usb_context_wait_for_replug() + Run vendor plugins as required + Add a plugin for SteelSeries hardware + Add fwupd_device_flag_to_string() + Return the device flags when getting firmware details + Show device flags in 'fwupdmgr get-devices' + Add fwupd_trust_flag_to_string() + Export FwupdUpdateState in libfwupd + Export FwupdUpdateFlags in libfwupd + Add FwupdResult to libfwupd + Add a self test framework for libfwupd + Add FwupdClient to libfwupd + Use FwupdClient from libfwupd in fwupdmgr + Use libfwupd inside the daemon + Emit a FwupdClient::changed when the daemon emits this signal + Rename some of the new libfwupd API to align with the D-Bus + names + libdfu: Fix up some NULL/FALSE confusion + libfwup: Fix up some NULL/FALSE confusion + FwupdClient + Allow other checksum kinds in FwupdResult + Allow SHA-256 hashes when verifying + Show the checksum kind in the fwupdmgr output + Add Alienware to the version quirk table + Do not use /tmp for downloaded files + Add fwupd_result_has_device_flag() + Do not return updates that require AC when on battery + Connect to UPower at startup + Test that GPG key import actually was successful (or didn't + change a key already in the keyring) + Use g_auto() in FuKeyring + Return errors of the correct type when using libfwupd + Allow overridding the location of the pending database for + test suite + Allow overriding the location of the provider offline files for + test suite + Validate that the dbus system bus is available before running + libfwupd tests + Update README.md for changes that have happened in the project + Add some basic explanation of how to use fwupd with various + frontends + Split out the libdfu-devel package + Revert "Allow overridding the location of the pending database + for test suite" + Revert "Allow overriding the location of the provider offline + files for test suite" + Allow the test suite to run in %check + Generate gtk-doc documentation for libfwupd ------------------------------------------------------------------- Mon Jan 30 10:11:29 UTC 2017 - zaitor@opensuse.org - Update to version 0.6.3: + Require AC power before scheduling some types of firmware + update + Install the hardcoded firmware AppStream file + Correct the BCD version number for DFU 1.1 + Add an unlock method for devices + Add ESRT enable method into UEFI provider. + Only read PCI OptionROM firmware when devices are manually + unlocked + Do not use deprecated API from libappstream-glib + Ignore the DFU runtime on the DW1820A + Export the attribute and quirk values in libdfu + Show ignored DFU devices in dfu-util, but not in fwupd + Allow defining update vfuncs with no runtime support + Revert "Allow defining update vfuncs with no runtime support" + Add a simple plugin infrastructure ------------------------------------------------------------------- Mon Jan 30 10:10:00 UTC 2017 - zaitor@opensuse.org - Update to version 0.6.2: + Add 'Created' and 'Modified' properties on managed devices + Fix get-results for UEFI provider. + Support vendor-specific UEFI version encodings + Move quirks directly into a single table and file. ------------------------------------------------------------------- Mon Jan 30 10:09:48 UTC 2017 - zaitor@opensuse.org - Update to version 0.6.1: + Only dump the profiling data when run with --verbose + Always persist ColorHug devices after replug + Do not misdetect different ColorHug devices ------------------------------------------------------------------- Thu Dec 10 15:44:25 UTC 2015 - dimstar@opensuse.org - Update to version 0.6.0: + Add support for updating USB devices with DFU + libdfu: Add support for DfuSe firmware + libdfu: Generate gtk-doc documentation + libdfu: Don't rely on specific hardware to be present + libdfu: Move the VID:PID checks from the tool to DfuDevice + libdfu: Use a custom error domain + Use the same device identification string format as Microsoft + libdfu: Fix crash when setting a target size + libdfu: Allow setting the alternate settings in DfuSe firmware + libdfu: Add a merge command to dfu-tool + libdfu: Allow choosing a different alt-setting when downloading + libdfu: Fix a crash when setting a NULL image name + libdfu: Correctly implement auto-boot in dfu_device_download() + libdfu: Check for extra args to dfu-tool convert + libdfu: Call the progress callback when doing detach + Ignore the DFU device detach:attach when verifying + libdfu: Require a --force flag to flash wildcard firmware + Use new API available in fwup 0.5 + libdfu: Make the element address 32 bits in size + libdfu: Support the ST-specific bitCanAccelerate + libdfu: Only do a Detach notification if we're actually doing to do it + libdfu: Use the progress bar for all uploads and downloads + libdfu: Improve the output of 'dfu-util list' + libdfu: Support download and upload to ST DfuSe devices + libdfu: Fix multi-interface devices like the Neo Freerunner + libdfu: Add a pkgconfig file + libdfu: Use signals to propagate device state + libdfu: Add a context object to handle device hotplug + libdfu: Add an example showing GObject Introspection + libdfu: Do not ref DfuDevice in DfuTarget so the auto-close + logic works + Close DFU devices as soon as possible after the transfer has completed + Emit the changed signal after doing an update + Rescan the DFU device after replug to get the new version + libdfu: Add dfu_context_get_device_by_platform_id() + libdfu: Add dfu_device_get_runtime_release() + libdfu: Add dfu_device_get_display_name() + libdfu: Fix self tests after recent API change + Split out the DFU provider as a new file + libdfu: Copy the platform ID and invalidate the GUsbDevice when removed + libdfu: Accept multiple spaces after the DfuSe sector name + libdfu: Verify the GUsbDevice is set before using it + libdfu: Remove the weak pointer when destroying the DfuTarget + libdfu: Fix dfu_device_wait_for_replug() so it can work with a DfuContext + Export the AppStream ID when returning device results + Rescan the DFU device after firmware has been updated + libdfu: Handle cancellation with ctrl+c in dfu-tool + libdfu: Add a quirk to support DFU runtime-less devices + libdfu: Add an explicit 'attach' method + libdfu: Add dfu_firmware_get_image_by_name() + libdfu: Make reading and writing to targets easier to + understand + Fix compile with --disable-shared + libdfu: Display all the files shown with 'dfu-tool dump' + libdfu: Fix a few crashers found using afl + libdfu: Fix another bug discovered by the fuzzer + libdfu: Add commands to encrypt and decrypt firmware images + libdfu: Show better device errors + libdfu: Add DfuCipher which is a property on a target and a + firmware file + libdfu: Add support for the draft 'DFU Metadata Table + Specification' + libdfu: Only enumerate the DfuContext when required + libdfu: Fix several reported crashes in the inhex32 import code + Release fwupd 0.6.0 ------------------------------------------------------------------- Thu Dec 10 15:44:17 UTC 2015 - dimstar@opensuse.org - Update to version 0.5.4: + Fix compile error against fwupdate git due to dropped + functions. + Use strerror() when printing errors from libfwupdate + Use new API available in fwup 0.5 + Release fwupd 0.5.4 ------------------------------------------------------------------- Thu Dec 10 15:44:11 UTC 2015 - dimstar@opensuse.org - Update to version 0.5.3: + Avoid seeking when reading the file magic during refresh + Do not assume that the compressed XML data will be NUL + terminated + debugging + Use the correct user agent string for fwupdmgr + Release fwupd 0.5.3 ------------------------------------------------------------------- Thu Dec 10 15:44:05 UTC 2015 - dimstar@opensuse.org - Update to version 0.5.2: + Ensure D-Bus remote errors are registered at fwupdmgr startup + Show the dotted-decimal representation of the UEFI version + number + require appstream-glib 0.5.1 + not found + When the version is from the 'FW' extension do not cache the + device + Support cabinet archives files with more than one firmware + Add the update description to the GetDetails results + Add profiling data to debug slow startup times + Fix verify-update to produce components with the correct + provide values + Clear the in-memory firmware store only after parsing a valid + XML file + Release fwupd 0.5.2 ------------------------------------------------------------------- Thu Dec 10 15:43:57 UTC 2015 - dimstar@opensuse.org - Update to version 0.5.1: + Fix the error message when no devices can be updated + offline update: Use glib api for for reading symlinks + Release fwupd 0.5.1 ------------------------------------------------------------------- Thu Dec 10 15:43:51 UTC 2015 - dimstar@opensuse.org - Update to version 0.5.0: + Do not merge the existing firmware metadata with the submitted + files + Raise the dep on GLib to support and use g_autoptr() + Do not reboot if racing with the PackageKit offline update + mechanism + Release fwupd 0.5.0 ------------------------------------------------------------------- Thu Dec 10 15:43:31 UTC 2015 - dimstar@opensuse.org - Update to version 0.1.6: + Install fwupd and fwsignd into /usr/lib/$(triplet)/fwupd + instead. + Use the new secure metadata URI + Update the offline update service to invoke right command + Don't apply firmware if something else is processing the + offline update + Remove fwsignd, we have the LVFS now + Depend on appstream-glib >= 0.5.0 + Add application metadata when getting the updates list + Simplify the version properties on devices to avoid complexity + and bugs + Release fwupd 0.1.6 ------------------------------------------------------------------- Thu Dec 10 15:43:03 UTC 2015 - dimstar@opensuse.org - Update to version 0.1.5: + Allow fwupd to be autostarted by systemd + Sign the test binary with the correct key + Do not pre-convert the update description from AppStream XML + Devices with option ROM are always internal + Prefer the GUID from the firmware than the device + Allow no arguments to 'fwupdmgr verify-update' and use sane + defaults + Add the ability to remove a vendor on the LVFS site + Fix validation of written firmware + Move the verification and metadata matching phase to the daemon + Add a simple config file to store the correct LVFS download URI + Make parsing the option ROM runtime optional + Add a Raspberry Pi firmware provider + Use the AppStream 0.9 firmware specification by default + Generate the ColorHug test files at runtime + Release fwupd 0.1.5 ------------------------------------------------------------------- Thu Dec 10 15:42:07 UTC 2015 - dimstar@opensuse.org - Update to version 0.1.4: + man/Makefile.am: Add --sgml to docbook2man invocation + Make statements about storing private keys stronger. + Provide a way for clients to add new firmware metadata to the + system cache + Fix fwupd-offline-update.service + Revert "man/Makefile.am: Add --sgml to docbook2man invocation" + Add a Udev firmware provider + Extract the version string from the ROM in PCI devices + Add a 'verify' command that verifies the cryptographic hash of + device firmware + Make the ROM parsing more robust and add self tests + Get the version number out from Intel VBIOS too + Provide a way to dump the option ROM using the command line + build: gusb is required even without colorhug + remove unused variables + Do not return NULL as a gboolean + Fix Intel VBIOS detection on Dell hardware + Do not use the subsystem information when constructing the fake + GUID + Actually parse the PCI option ROM + Accept multiple files at one time when using fwupdmgr dump-rom + verify run + Add a 'verify-update' command to fwupdmgr + Fix trivial bug when parsing firmware versions + Keep hitting the hardware until it gives us enough ROM + Make the version parsing more resilient to corrupt firmware + Fix the example .inf file to reflect reality + Fix ROM PPID searching to work for all ROMs + Move the LVFS website to the fwupd project + Add the ability to create detached signatures + Allow cab files to be saved + Add a simple signing server that operates on .cab files + Automatically download metadata using fwupdmgr if required + Don't call efibootmgr after fwupdate. + Associate the contact email address directly with the vendor + key + Use the actual LVFS GPG key + Allow running fwsignd as the non-root user + metadata + Do not merge existing LVFS metadata + Do not use the file hash when storing the LVFS submitted + firmwares + Move GetUpdates to the daemon + Change the DBus method for installing firmware to 'Install' + Allow installing an offline UEFI update without --offline + Add a 'fwupdmgr update' command to update all devices to latest + versions + 'update' command + Increase the size limit of firmware to 50Mb + Only sign files when the entire file has been copied + Fallback to offline install when calling the update argument. + Reload appstream data after refreshing. + Release fwupd 0.1.4 ------------------------------------------------------------------- Thu Dec 10 15:41:38 UTC 2015 - dimstar@opensuse.org - Update to version 0.1.3: + Coldplug the devices before acquiring the well known name + Add an UNKNOWN status so we can return meaningful enum values + Run the offline actions using systemd when required + Get the firmware version from the device descriptors + Added syntax highlighting + More markup + Support OpenHardware devices using the fwupd vendor extensions + Move boolean properties on the device to a set of flags + Release fwupd 0.1.3 ------------------------------------------------------------------- Wed May 27 11:12:03 UTC 2015 - dimstar@opensuse.org - Update to version 0.1.2: + More markup + Fixed typos and markup for executable + Add slovak translation + Add helper code to validate public key signatures + Decompress any firmware signatures in the .cab file + Verify firmware if a detached signature is present + Show the firmware trust status when doing GetDetails() + Only allow signed firmware to be upgraded without a password + Add some guidelines for vendors to README + Small grammar fix + Extract the .cat file alongside the firmware + Release fwupd 0.1.2 ------------------------------------------------------------------- Mon Apr 13 17:54:58 UTC 2015 - dimstar@opensuse.org - Update to version fwupd_0_1_1: + Do not crash when there are no devices to return + Add a 'get-updates' command to fwupdmgr + Add and document the offline-update lifecycle + Create runtime directories if they do not exist + Create a libfwupd shared library + Export the status as an enumerated value rather than a string + Release fwupd 0.1.1 ------------------------------------------------------------------- Mon Apr 13 17:53:40 UTC 2015 - dimstar@opensuse.org - Initial package.
Locations
Projects
Search
Status Monitor
Help
OpenBuildService.org
Documentation
API Documentation
Code of Conduct
Contact
Support
@OBShq
Terms
openSUSE Build Service is sponsored by
The Open Build Service is an
openSUSE project
.
Sign Up
Log In
Places
Places
All Projects
Status Monitor
