File 0101-Super1-allow-RAID0-layout-setting-to-be-re... of Package mdadm.17611

Overview Repositories Revisions Requests Users Attributes Meta

File 0101-Super1-allow-RAID0-layout-setting-to-be-removed.patch of Package mdadm.17611

From 97b51a2c2d00b79a59f2a8e37134031b0c9e0223 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Wed, 14 Oct 2020 13:12:48 +1100
Subject: [PATCH 07/17] Super1: allow RAID0 layout setting to be removed.

Once the RAID0 layout has been set, the RAID0 array cannot be assembled
on an older kernel which doesn't understand layouts.
This is an intentional safety feature, but sometimes people need the
ability to roll-back to a previously working configuration.

So add "--update=layout-unspecified" to remove RAID0 layout information
from the superblock.
Running "--assemble --update=layout-unspecified" will cause the assembly
the fail when run on a newer kernel, but will allow it to work on
an older kernel.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
 md.4       | 13 +++++++++++++
 mdadm.8.in | 15 +++++++++++++--
 mdadm.c    |  5 +++--
 super1.c   |  6 +++++-
 4 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/md.4 b/md.4
index aecff38..60fdd27 100644
--- a/md.4
+++ b/md.4
@@ -215,6 +215,19 @@ option or the
 .B "--update=layout-alternate"
 option.
 
+Once you have updated the layout you will not be able to mount the array
+on an older kernel.  If you need to revert to an older kernel, the
+layout information can be erased with the
+.B "--update=layout-unspecificed"
+option.  If you use this option to 
+.B --assemble
+while running a newer kernel, the array will NOT assemble, but the
+metadata will be update so that it can be assembled on an older kernel.
+
+No that setting the layout to "unspecified" removes protections against
+this bug, and you must be sure that the kernel you use matches the
+layout of the array.
+
 .SS RAID1
 
 A RAID1 array is also known as a mirrored set (though mirrors tend to
diff --git a/mdadm.8.in b/mdadm.8.in
index ab832e8..34a93a8 100644
--- a/mdadm.8.in
+++ b/mdadm.8.in
@@ -1213,6 +1213,7 @@ argument given to this flag can be one of
 .BR no\-ppl ,
 .BR layout\-original ,
 .BR layout\-alternate ,
+.BR layout\-unspecified ,
 .BR metadata ,
 or
 .BR super\-minor .
@@ -1368,8 +1369,9 @@ The
 .B layout\-original
 and
 .B layout\-alternate
-options are for RAID0 arrays in use before Linux 5.4.  If the array was being
-used with Linux 3.13 or earlier, then to assemble the array on a new kernel,
+options are for RAID0 arrays with non-uniform devices size that were in
+use before Linux 5.4.  If the array was being used with Linux 3.13 or
+earlier, then to assemble the array on a new kernel, 
 .B \-\-update=layout\-original
 must be given.  If the array was created and used with a kernel from Linux 3.14 to
 Linux 5.3, then
@@ -1379,6 +1381,15 @@ will happen normally.
 For more information, see
 .IR md (4).
 
+The
+.B layout\-unspecified
+option reverts the effect of
+.B layout\-orignal
+or
+.B layout\-alternate
+and allows the array to be again used on a kernel prior to Linux 5.3.
+This option should be used with great caution.
+
 .TP
 .BR \-\-freeze\-reshape
 Option is intended to be used in start-up scripts during initrd boot phase.
diff --git a/mdadm.c b/mdadm.c
index 1b3467f..493d70e 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -796,7 +796,8 @@ int main(int argc, char *argv[])
 			if (strcmp(c.update, "revert-reshape") == 0)
 				continue;
 			if (strcmp(c.update, "layout-original") == 0 ||
-			    strcmp(c.update, "layout-alternate") == 0)
+			    strcmp(c.update, "layout-alternate") == 0 ||
+			    strcmp(c.update, "layout-unspecified") == 0)
 				continue;
 			if (strcmp(c.update, "byteorder") == 0) {
 				if (ss) {
@@ -828,7 +829,7 @@ int main(int argc, char *argv[])
 		"     'summaries', 'homehost', 'home-cluster', 'byteorder', 'devicesize',\n"
 		"     'no-bitmap', 'metadata', 'revert-reshape'\n"
 		"     'bbl', 'no-bbl', 'force-no-bbl', 'ppl', 'no-ppl'\n"
-		"     'layout-original', 'layout-alternate'\n"
+		"     'layout-original', 'layout-alternate', 'layout-unspecified'\n"
 				);
 			exit(outf == stdout ? 0 : 2);
 
diff --git a/super1.c b/super1.c
index 7664883..8b0d6ff 100644
--- a/super1.c
+++ b/super1.c
@@ -1551,11 +1551,15 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
 	else if (strcmp(update, "nofailfast") == 0)
 		sb->devflags &= ~FailFast1;
 	else if (strcmp(update, "layout-original") == 0 ||
-		 strcmp(update, "layout-alternate") == 0) {
+		 strcmp(update, "layout-alternate") == 0 ||
+		 strcmp(update, "layout-unspecified") == 0) {
 		if (__le32_to_cpu(sb->level) != 0) {
 			pr_err("%s: %s only supported for RAID0\n",
 			       devname?:"", update);
 			rv = -1;
+		} else if (strcmp(update, "layout-unspecified") == 0) {
+			sb->feature_map &= ~__cpu_to_le32(MD_FEATURE_RAID0_LAYOUT);
+			sb->layout = 0;
 		} else {
 			sb->feature_map |= __cpu_to_le32(MD_FEATURE_RAID0_LAYOUT);
 			sb->layout = __cpu_to_le32(update[7] == 'o' ? 1 : 2);
-- 
2.26.2

Places

File 0101-Super1-allow-RAID0-layout-setting-to-be-removed.patch of Package mdadm.17611

Places