File cpupower-mperf_monitor-Introduce-per_cpu_schedu... of Package cpupower.13927

Overview Repositories Revisions Requests Users Attributes Meta

File cpupower-mperf_monitor-Introduce-per_cpu_schedule-flag.patch of Package cpupower.13927

From: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Subject: cpupower: mperf_monitor: Introduce per_cpu_schedule flag
References: bsc#1152967
Patch-Mainline: v5.5-rc1
Git-commit: 7adafe541fe5e015261a92d39db8b163db477337

The per_cpu_schedule flag is used to move the cpupower process to the cpu
on which we are looking to read the APERF/MPERF registers.

This prevents IPIs from being generated by read_msr()s as we are already
on the cpu of interest.

Ex: If cpupower is running on CPU 0 and we execute

read_msr(20, MSR_APERF, val) then,
    read_msr(20, MSR_MPERF, val)

the msr module will generate an IPI from CPU 0 to CPU 20 to query
    for the MSR_APERF and then the MSR_MPERF in separate IPIs.

This delay, caused by IPI latency, between reading the APERF and MPERF
registers may cause both of them to go out of sync.

The use of the per_cpu_schedule flag reduces the probability of this
from happening. It comes at the cost of a negligible increase in cpu
consumption caused by the migration of cpupower across each of the
cpus of the system.

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Signed-off-by:  <trenn@suse.com>
diff --git a/utils/idle_monitor/cpupower-monitor.h b/utils/idle_monitor/cpupower-monitor.h
index 9b612d999660..5b5eb1da0cce 100644
--- a/utils/idle_monitor/cpupower-monitor.h
+++ b/utils/idle_monitor/cpupower-monitor.h
@@ -62,6 +62,7 @@ struct cpuidle_monitor {
 	unsigned int overflow_s;
 	struct {
 		unsigned int needs_root:1;
+		unsigned int per_cpu_schedule:1;
 	} flags;
 };
 
diff --git a/utils/idle_monitor/mperf_monitor.c b/utils/idle_monitor/mperf_monitor.c
index 7cae74202a4d..afb2e6f8edd3 100644
--- a/utils/idle_monitor/mperf_monitor.c
+++ b/utils/idle_monitor/mperf_monitor.c
@@ -86,15 +86,35 @@ static int mperf_get_tsc(unsigned long long *tsc)
 	return ret;
 }
 
+static int get_aperf_mperf(int cpu, unsigned long long *aval,
+				    unsigned long long *mval)
+{
+	int ret;
+
+	/*
+	 * Running on the cpu from which we read the registers will
+	 * prevent APERF/MPERF from going out of sync because of IPI
+	 * latency introduced by read_msr()s.
+	 */
+	if (mperf_monitor.flags.per_cpu_schedule) {
+		if (bind_cpu(cpu))
+			return 1;
+	}
+
+	ret  = read_msr(cpu, MSR_APERF, aval);
+	ret |= read_msr(cpu, MSR_MPERF, mval);
+
+	return ret;
+}
+
 static int mperf_init_stats(unsigned int cpu)
 {
-	unsigned long long val;
+	unsigned long long aval, mval;
 	int ret;
 
-	ret = read_msr(cpu, MSR_APERF, &val);
-	aperf_previous_count[cpu] = val;
-	ret |= read_msr(cpu, MSR_MPERF, &val);
-	mperf_previous_count[cpu] = val;
+	ret = get_aperf_mperf(cpu, &aval, &mval);
+	aperf_previous_count[cpu] = aval;
+	mperf_previous_count[cpu] = mval;
 	is_valid[cpu] = !ret;
 
 	return 0;
@@ -102,13 +122,12 @@ static int mperf_init_stats(unsigned int cpu)
 
 static int mperf_measure_stats(unsigned int cpu)
 {
-	unsigned long long val;
+	unsigned long long aval, mval;
 	int ret;
 
-	ret = read_msr(cpu, MSR_APERF, &val);
-	aperf_current_count[cpu] = val;
-	ret |= read_msr(cpu, MSR_MPERF, &val);
-	mperf_current_count[cpu] = val;
+	ret = get_aperf_mperf(cpu, &aval, &mval);
+	aperf_current_count[cpu] = aval;
+	mperf_current_count[cpu] = mval;
 	is_valid[cpu] = !ret;
 
 	return 0;
@@ -305,6 +324,9 @@ struct cpuidle_monitor *mperf_register(void)
 	if (init_maxfreq_mode())
 		return NULL;
 
+	if (cpupower_cpu_info.vendor == X86_VENDOR_AMD)
+		mperf_monitor.flags.per_cpu_schedule = 1;
+
 	/* Free this at program termination */
 	is_valid = calloc(cpu_count, sizeof(int));
 	mperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));

Places

File cpupower-mperf_monitor-Introduce-per_cpu_schedule-flag.patch of Package cpupower.13927

Places