File azure-li-services.changes of Package azure-li-services

Overview Repositories Revisions Requests Users Attributes Meta

File azure-li-services.changes of Package azure-li-services (Revision a2cec6322bd85c62fc61d0f1b2348033)

Currently displaying revision a2cec6322bd85c62fc61d0f1b2348033 , Show latest

-------------------------------------------------------------------
Tue May  7 09:59:20 CEST 2019 - ms@suse.de

- Bump version: 1.1.30 → 1.1.31
  
-------------------------------------------------------------------
Tue May  7 09:56:33 CEST 2019 - ms@suse.de
  
- Reference commit for SUSE maintenance
  
  This submission creates a reference to bsc#1133162 which
  got fixed in Issue #138
  
-------------------------------------------------------------------
Tue May  7 09:32:10 CEST 2019 - ms@suse.de
  
- Bump version: 1.1.29 → 1.1.30
  
-------------------------------------------------------------------
Fri May  3 10:42:32 CEST 2019 - ms@suse.de
  
- Umount LUN only on cleanup
  
  If one service(A) needs the LUN and another service(B) that needs
  the LUN too runs in parallel a potential race condition exists
  in a way the service A could have umounted the LUN exactly at
  a time service B accesses it. Thus this patch changes the
  services such that only the last service, the cleanup service
  umounts the LUN. This Fixes #137
  
-------------------------------------------------------------------
Fri Apr 26 16:13:18 CEST 2019 - jesus.bv@suse.com
  
- Load softdog module when STONITH is set up
  
  It loads the module and make the load boot persistant
  This Fixes #138
  
-------------------------------------------------------------------
Thu Apr 11 10:24:51 CEST 2019 - ms@suse.de
  
- Bump version: 1.1.28 → 1.1.29
  
-------------------------------------------------------------------
Wed Apr 10 10:25:14 CEST 2019 - ms@suse.de
  
- Fixup system-setup service dependencies
  
  The setup of the stonith SBD device requires the network
  to be up beforehand because the target is an iSCSI endpoint.
  This Fixes #119
  
-------------------------------------------------------------------
Mon Apr  1 09:14:10 CEST 2019 - ms@suse.de
  
- Bump version: 1.1.27 → 1.1.28
  
-------------------------------------------------------------------
Fri Mar 29 16:34:54 CET 2019 - ms@suse.de
  
- Create /etc/sysconfig/sbd configuration
  
  Write /etc/sysconfig/sbd which contains the disk device
  name used to initialize the SBD device
  
-------------------------------------------------------------------
Tue Mar 12 22:06:45 CET 2019 - ms@suse.de
  
- Add support for iSCSI SBD device setup
  
  In a new an optional stonith section the configuration for
  the iSCSI initiator and ip address can be setup. Once present
  the process to setup the iSCSI initiator as well as the
  device discovery is started. This Fixes bsc#1125373 and
  bsc#1125372 and Fixes #119
  
-------------------------------------------------------------------
Tue Mar  5 14:44:17 CET 2019 - ms@suse.de
  
- Bump version: 1.1.26 → 1.1.27
  
-------------------------------------------------------------------
Tue Mar  5 14:41:13 CET 2019 - ms@suse.de
  
- Tracker bug references
  
  This commit is a reference commit to track the update of
  the package for SLES. bsc#1127923 and bsc#1127924 references
  the implementations done with the Issues #121, #120 and #114
  
-------------------------------------------------------------------
Wed Feb 27 11:34:07 CET 2019 - ms@suse.de
  
- Bump version: 1.1.25 → 1.1.26
  
-------------------------------------------------------------------
Wed Feb 27 11:33:00 CET 2019 - ms@suse.de
  
- Fixed ifroute file name to match size limits
  
  Adapt ifroute- file name to match the new vlan interface naming
  and avoid exceeding the file name size limits
  
-------------------------------------------------------------------
Tue Feb 26 18:05:35 CET 2019 - ms@suse.de
  
- Bump version: 1.1.24 → 1.1.25
  
-------------------------------------------------------------------
Mon Feb 25 12:40:13 CET 2019 - ms@suse.de
  
- Bump version: 1.1.23 → 1.1.24
  
-------------------------------------------------------------------
Mon Feb 25 12:38:26 CET 2019 - ms@suse.de
  
- Followup fix for package installer
  
  Concatenation of packages still leads to multiple packages
  passed as one argument. This commit finally fixes the package
  list handling
  
-------------------------------------------------------------------
Mon Feb 25 11:31:10 CET 2019 - ms@suse.de
  
- Fixed network service vlan setup
  
  The vlan setup used the interface name in its ifcfg config
  file in the following format: ifcfg-<interface>.<vlan_id>
  However if the interface name is based on the MAC address
  that leads to a name which is longer than the fixed defined
  value from /usr/include/linux/if.h: #define IFNAMSIZ 16
  and will make the network setup to fail. Therefore this
  patch changes the config file for the vlan setup to follow
  the format: ifcfg-vlan<vlan_id> which avoids that size
  limit. This Fixes #115
  
-------------------------------------------------------------------
Mon Feb 25 11:15:53 CET 2019 - ms@suse.de
  
- Bump version: 1.1.22 → 1.1.23
  
-------------------------------------------------------------------
Mon Feb 25 11:14:22 CET 2019 - ms@suse.de
  
- Fix package installer
  
  zypper expects multiple packages as arguments, one argument
  per package, one argument with multiple packages is treated
  as one long package name and of course fails
  
-------------------------------------------------------------------
Mon Feb 25 09:22:13 CET 2019 - ms@suse.de
  
- Cleanup network service
  
  Delete unused elements from ifcfg configuration on suse systems
  
  * ONBOOT, obsolete if STARTMODE is used
  * VLAN, obsolete ETHERDEVICE gives the vlan type
  * DEVICE, obsolete and invalid use of self reference. suse
    only uses this in the context of PPP(oE) interfaces which
    are not of interest in the scope of Azure LI/VLI
    
-------------------------------------------------------------------
Mon Feb 25 08:20:52 CET 2019 - ms@suse.de
    
- Bump version: 1.1.21 → 1.1.22
  
-------------------------------------------------------------------
Sat Feb 23 15:54:24 CET 2019 - ms@suse.de
  
- Allow to specify install section per repo
  
  Update schema per last feedback. Allow to specify the
  install section per repository section. Restore former
  behavior for raw directory section, which installs all
  rpms from the given directories
  
-------------------------------------------------------------------
Mon Feb 18 08:41:11 CET 2019 - ms@suse.de
  
- Extend installer service
  
  Allow to configure multiple repositories and formats not only
  packages from a directory list. Specifically add packages to
  install in an install section. This Fixes #120
  
-------------------------------------------------------------------
Sun Feb 17 13:39:55 CET 2019 - ms@suse.de
  
- Added optional require_password_change attribute
  
  Allow to specify if the user password has to be changed on
  next logon. This Fixes #121
  
-------------------------------------------------------------------
Tue Feb 12 09:29:03 CET 2019 - ms@suse.de
  
- Bump version: 1.1.20 → 1.1.21
  
-------------------------------------------------------------------
Mon Feb 11 17:39:34 CET 2019 - ms@suse.de
  
- Added support for interface bonding
  
  Allow to setup bonding slaves on top of vlan interfaces
  or direct bonding structure. Because bonding slave interfaces
  comes with no ip/netmask setup the schema has to be changed
  to allow interface list elements without ip and subnet_mask
  fields which were required elements before.
  This Fixes #114
  
-------------------------------------------------------------------
Wed Jan  9 17:59:06 CET 2019 - ms@suse.de
  
- Bump version: 1.1.19 → 1.1.20
  
-------------------------------------------------------------------
Wed Jan  9 17:58:33 CET 2019 - ms@suse.de
  
- Submission to SUSE:SLE-15:Update
  
  This commit tracks the submission for fate#326575
  and bsc#1105612
  
-------------------------------------------------------------------
Wed Jan  9 17:53:39 CET 2019 - ms@suse.de
  
- Bump version: 1.1.18 → 1.1.19
  
-------------------------------------------------------------------
Wed Jan  9 11:41:42 CET 2019 - ms@suse.de
  
- Fixup createrepo requirement
  
  createrepo is no longer part of SLE15. The successor of this
  package is createrepo_c an implementation in C. Therefore
  the requires statement in the spec file should be changed to
  work with both distributions: SLE12 and SLE15.
  
-------------------------------------------------------------------
Tue Jan  8 15:51:24 CET 2019 - ms@suse.de
  
- Support MTU setup for standard and vlan interfaces
  
  Enhanced the config schema to allow the networking attributes
  mtu and vlan_mtu as optional arguments to configure the maximum
  transfer unit for the interface and/or its virtual type. In
  addition add a differentiator for the VeryLarge instance types
  in generation 3 and its successor. For Gen3 VeryLarge instance
  types the network setup was not yet defined because we haven't
  started to support this target. However the successor of the
  VeryLarge instance type is similar in the infrastructure and
  boot compared to the LargeInstance type and can be covered
  by the network service in the same way. This Fixes #105
  and Fixes bsc#1120522
  
-------------------------------------------------------------------
Mon Jan  7 16:29:17 CET 2019 - ms@suse.de
  
- Bump version: 1.1.17 → 1.1.18
  
-------------------------------------------------------------------
Mon Jan  7 16:26:38 CET 2019 - ms@suse.de
  
- Submission to SUSE:SLE-15:Update
  
  This commit tracks the submission for fate#326575
  and bsc#1103542
  
-------------------------------------------------------------------
Tue Dec 18 12:13:11 CET 2018 - ms@suse.de
  
- Bump version: 1.1.16 → 1.1.17
  
-------------------------------------------------------------------
Tue Dec 18 12:12:54 CET 2018 - ms@suse.de
  
- Update package build due to guidelines
  
-------------------------------------------------------------------
Mon Dec 17 12:06:27 CET 2018 - ms@suse.de
  
- Bump version: 1.1.15 → 1.1.16
  
-------------------------------------------------------------------
Mon Dec 17 12:04:50 CET 2018 - ms@suse.de
  
- Tracker bug reference
  
  Update of the package is tracked in bsc#1119702
  
-------------------------------------------------------------------
Tue Dec 11 10:50:07 CET 2018 - ms@suse.de
  
- Bump version: 1.1.14 → 1.1.15
  
-------------------------------------------------------------------
Mon Dec 10 17:05:35 CET 2018 - ms@suse.de
  
- Fixed group processing in setup_ssh_authorization
  
  The change in the schema to specify group names/id was not
  handled in the code processing the setup of the ssh
  authorization. As there was a group key before and after the
  change in the schema but with a different result and used
  only as parameters to a mocked grp.getgrnam() system call
  the unit tests did not uncover the issue. This Fixes #98
  
-------------------------------------------------------------------
Wed Nov 21 08:52:12 CET 2018 - ms@suse.de
  
- Bump version: 1.1.13 → 1.1.14
  
-------------------------------------------------------------------
Tue Nov 20 10:01:51 CET 2018 - ms@suse.de
  
- Write workload log file
  
  In case of a deployment error, a log file in addition to the
  status flag files is written which contains the systemd
  service log information from all services ran so far.
  The log file is written to the storage location from which
  the yaml config file was read from. It is expected that
  this location is writable and offers enough space to store
  the logfile. In case of an error writing the log we will
  treat this as "bad luck" and continue with the cleanup.
  This Fixes #96
  
-------------------------------------------------------------------
Fri Nov 16 15:45:15 CET 2018 - ms@suse.de
  
- Cleanup code to make flake8 happy
  
  The new version of flake8 is more strict on code checking and
  complained at several places. This commit fixes the code smells
  such that flake8 is happy again
  
-------------------------------------------------------------------
Fri Nov 16 15:15:43 CET 2018 - ms@suse.de
  
- Added workload status flag file
  
  At the time of the cleanup service a file named:
  workload_success_is_true or workload_success_is_false
  will be written on the storage location the config file
  was read from. At the time this file appears it's also
  safe to release the config file storage location from
  the system. This Fixes #93
  
-------------------------------------------------------------------
Fri Sep 21 18:04:51 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.12 → 1.1.13
  
-------------------------------------------------------------------
Fri Sep 21 11:51:44 CEST 2018 - ms@suse.de
  
- Refactor group schema
  
  The description of a user group must be connected to a
  name, whereas the group id is an optional information.
  This should be also reflected in the schema
  
-------------------------------------------------------------------
Wed Sep 19 20:45:31 CEST 2018 - ms@suse.de
  
- Allow optional group_id in user data
  
  This Fixes #90
  
-------------------------------------------------------------------
Mon Sep 17 17:18:12 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.11 → 1.1.12
  
-------------------------------------------------------------------
Mon Sep 17 11:48:54 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.10 → 1.1.11
  
-------------------------------------------------------------------
Mon Sep 17 09:48:20 CEST 2018 - ms@suse.de
  
- Replace pre/post section with descriptive comment
  
-------------------------------------------------------------------
Mon Sep 17 08:08:11 CEST 2018 - rjschwei@suse.com
  
- Fix typos in spec file comment
  
-------------------------------------------------------------------
Fri Sep 14 18:32:16 CEST 2018 - ms@suse.de
  
- Fix inconsistent cleanup service
  
  The introduction of the pre/post scripts in the package which
  runs systemd macros to delete the services causes a core dump
  on zypper and prevents the cleanup service from actually
  uninstalling the package. Thus I suggest to delete those
  pre/post actions from the package and leave this in the hand
  of the cleanup service using the reset-failed command from
  systemd after uninstall of the package has been performed.
  This references Issue #88
  
-------------------------------------------------------------------
Fri Sep 14 10:09:30 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.9 → 1.1.10
  
-------------------------------------------------------------------
Thu Sep 13 17:48:49 CEST 2018 - rjschwei@suse.com
  
- Properly handle service stop/restart on package update or removal
  
-------------------------------------------------------------------
Wed Sep 12 11:55:17 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.8 → 1.1.9
  
-------------------------------------------------------------------
Tue Sep 11 11:34:00 CEST 2018 - ms@suse.de
  
- Allow to activate/deactivate the crash dump setup
  
  The crash dump setup deserves its own section containing
  the optional high/low values as well as a new switch to
  control the activation of the setup process.
  This Fixes #78
  
-------------------------------------------------------------------
Thu Aug 23 14:37:13 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.7 → 1.1.8
  
-------------------------------------------------------------------
Thu Aug 23 11:49:57 CEST 2018 - ms@suse.de
  
- Follow up fix for mount location checkup
  
  Provides a umount_config_source method in the Defaults
  space to allow to perform an umount which succeeds even
  if the mountpoint is busy. The umount is performed as
  Lazy unmount and detaches the filesystem from the file
  hierarchy now, and clean up all references to this
  filesystem as soon as it is not busy anymore.
  This Fixes #76
  
-------------------------------------------------------------------
Tue Aug 21 22:22:03 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.6 → 1.1.7
  
-------------------------------------------------------------------
Tue Aug 21 12:02:09 CEST 2018 - ms@suse.de
  
- Check if mount location is already mounted
  
  Call the mountpoint command in mount_config_source prior to the
  actual mount and perform the mount process only if the location
  is not already an active mountpoint. This Fixes #74
  
-------------------------------------------------------------------
Fri Aug 17 10:23:21 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.5 → 1.1.6
  
-------------------------------------------------------------------
Thu Aug 16 15:32:29 CEST 2018 - ms@suse.de
  
- Accumulate errors in user service
  
  Instead of exiting at the first raise condition continue
  setting up other users and raise with the collection of
  potential errors. Fixes #71
  
-------------------------------------------------------------------
Thu Aug 16 15:09:07 CEST 2018 - ms@suse.de
  
- Accumulate errors in system_setup service
  
  Instead of exiting at the first raise condition continue
  setting up other system components and raise with the
  collection of potential errors. Issue #71
  
-------------------------------------------------------------------
Thu Aug 16 14:55:03 CEST 2018 - ms@suse.de
  
- Accumulate errors in storage service
  
  Instead of exiting at the first raise condition continue
  setting up other storage mounts and raise with the
  collection of potential errors. Issue #71
  
-------------------------------------------------------------------
Thu Aug 16 11:13:12 CEST 2018 - ms@suse.de
  
- Accumulate errors in network service
  
  Instead of exiting at the first raise condition continue
  setting up other network interfaces and raise with the
  collection of potential errors. Issue #71
  
-------------------------------------------------------------------
Thu Aug 16 11:05:11 CEST 2018 - ms@suse.de
  
- Accumulate errors in machine_constraints service
  
  Instead of exiting at the first raise condition continue
  checking other machine constraints and raise with the
  collection of potential errors. Issue #71
  
-------------------------------------------------------------------
Thu Aug 16 10:54:13 CEST 2018 - ms@suse.de
  
- Don't raise on missing vlan id
  
  The vlan setup is an add-on setup if a vlan id is given.
  If it's not given the other network components are still
  valid and this does not justify create_vlan_config to raise
  an exception but just skip the vlan setup
  
-------------------------------------------------------------------
Thu Aug 16 10:04:16 CEST 2018 - ms@suse.de
  
- Fixed access of unbound variable
  
  For the copy of the ssh private key the location providing the
  key is mounted first and umounted when done. However the location
  information from the mount is unknown in the scope of the final
  block performing the umount. This Fixes #70
  
-------------------------------------------------------------------
Wed Aug 15 11:14:57 CEST 2018 - ms@suse.de
  
- Fixup system inconsistency on module loading
  
  Make sure that no services module code is loaded from disk after
  the cleanup service has uninstalled the azure-li-services package.
  All follow up code after the uninstall must be kept in memory.
  This Fixes #68
  
-------------------------------------------------------------------
Tue Aug 14 10:55:45 CEST 2018 - ms@suse.de
  
- Submission to SUSE:SLE-12-SP3:Update:PubClouds
  
  This commit tracks the submission for fate#326575
  and bsc#1103542
  
-------------------------------------------------------------------
Thu Aug  2 11:15:17 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.4 → 1.1.5
  
-------------------------------------------------------------------
Fri Jul 27 16:50:13 CEST 2018 - ms@suse.de
  
- Allow reboot of the system via kexec
  
  This patch set is two fold:
  
  First it adds a reboot flag to the status report
  and extends the cleanup service to allow for reboot of
  the system via kexec if all services were successful
  and at least one requests for reboot of the system in
  its result report.
  
  Second it extends the system setup service for the
  crash kernel memory setup in a way that the high
  value if not set via the config file is calculated
  based on the amount of main memory. If the preconfigured
  values have changed the system_setup service also
  activates the reboot flag in its status report
  
  This Fixes #64
  
-------------------------------------------------------------------
Thu Jul 26 17:01:17 CEST 2018 - ms@suse.de
  
- Fixup saptune startup sequence
  
  Regarding a discussion with Peter Schinagl the sequence
  to start the saptune daemon was wrong and is fixed with
  this commit. Fixes #65
  
-------------------------------------------------------------------
Thu Jul 19 16:30:10 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.3 → 1.1.4
  
-------------------------------------------------------------------
Wed Jul 18 09:18:55 CEST 2018 - ms@suse.de
  
- Update schema semantic to specify ssh private key
  
  The former ssh private key specification was based on
  a custom file name and a target name for the key. The
  given file name was copied and renamed as specified.
  However the renaming seems superfluous and can be
  avoided by specifying just the file name and copying
  as such to the right place.
  
-------------------------------------------------------------------
Tue Jul 17 16:54:01 CEST 2018 - ms@suse.de
  
- Refactor reading of ssh private key
  
  Instead of specifying a base64 encoded private ssh key
  string as part of the key element in the config file,
  we now just read a file path reference which is expected
  to exist on the storage location from where the config
  file was read. The referenced file is copied as the
  ssh private key of the configured user. This sets the
  config file free from any secret data and Fixes #58
  
-------------------------------------------------------------------
Tue Jul 17 11:47:43 CEST 2018 - ms@suse.de
  
- Fixup runtime order of report service
  
  Next try to make sure the report service runs before
  any getty@.service is called. The getty@.service is
  configured to run after systemd-user-sessions.service
  Thus we should be safe if the reporting service runs
  before systemd-user-sessions.service
  
-------------------------------------------------------------------
Tue Jul 10 09:48:45 CEST 2018 - ms@suse.de
  
- Added reboot intervention on Very Large Instances
  
  For Very Large Instance platforms the reboot may not happen
  without operator intervention. On EFI systems this can be
  done by an efi call script: startup.nsh. This method was
  preferred over setting a BIOS boot option through the Bios
  menu by the Microsoft ops team. This Fixes #46
  
-------------------------------------------------------------------
Mon Jul  9 16:10:33 CEST 2018 - ms@suse.de
  
- Seems like latest tox version is broken
  
  Pin the version to 2.9.1 for the moment
  
-------------------------------------------------------------------
Mon Jul  9 15:58:53 CEST 2018 - ms@suse.de
  
- Setup start of saptune daemon and tuned service
  
  The start of the service requires the sap-hana profile
  to be installed on the system. The hana profile as of
  today is delivered by a custom package from $MS, installed
  via the azure-li-install service. Thus the system_setup
  service now runs after the install service.
  This Fixes #52
  
-------------------------------------------------------------------
Sun Jul  8 16:58:51 CEST 2018 - ms@suse.de
  
- Call kdump calibrate only when needed
  
-------------------------------------------------------------------
Fri Jul  6 11:24:38 CEST 2018 - ms@suse.de
  
- Added kernel crash dump setup
  
  Allows the setup of custom kernel crash dump values from the
  yaml config file. If not specified the kdumptool calibration
  results will be used to setup the high and low memory range to
  store crash dumps. Please also note that the image comes with
  a pre-configured crashdump setup in case the kernel crashes
  before this system_setup service has done its job.
  This Fixes #50
  
-------------------------------------------------------------------
Thu Jul  5 15:06:45 CEST 2018 - ms@suse.de
  
- Added samepage and energy performance setup
  
  Extend the system_setup service with the setup of the
  kernel samepage handling and energy performance selection.
  This Fixes #54 and Fixes #53
  
-------------------------------------------------------------------
Thu Jun 28 15:36:30 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.2 → 1.1.3
  
-------------------------------------------------------------------
Wed Jun 27 21:39:02 CEST 2018 - ms@suse.de
  
- Fix service order for storage unit
  
  The storage service has to run after the network target
  has been reached. This Fixes #49
  
-------------------------------------------------------------------
Thu Jun 21 15:38:12 CEST 2018 - ms@suse.de
  
- Allow import of private key
  
  Add an additional optional sub section named ssh-private-key
  into the credentials section. The section allows for a name
  which is the base filename of an ssh private key and the key
  value encoded as base64 string. This Fixes #42
  
-------------------------------------------------------------------
Thu Jun 21 14:35:26 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.1 → 1.1.2
  
-------------------------------------------------------------------
Thu Jun 21 14:35:04 CEST 2018 - ms@suse.de
  
- Added system_setup to report service
  
-------------------------------------------------------------------
Thu Jun 21 11:06:52 CEST 2018 - ms@suse.de
  
- Bump version: 1.1.0 → 1.1.1
  
-------------------------------------------------------------------
Thu Jun 21 10:04:54 CEST 2018 - ms@suse.de
  
- Make hostname an optional setup
  
-------------------------------------------------------------------
Wed Jun 20 16:36:39 CEST 2018 - ms@suse.de
  
- Added system_setup service
  
  Along with the service the setup of the hostname has
  been implemented. This Fixes #40
  
-------------------------------------------------------------------
Tue Jun 19 19:10:30 CEST 2018 - ms@suse.de
  
- Fixup success state for optional services
  
  This Fixes #43
  
-------------------------------------------------------------------
Tue Jun 19 18:41:17 CEST 2018 - ms@suse.de
  
- Make sure report service starts before getty
  
  This Fixes #38
  
-------------------------------------------------------------------
Tue Jun 19 18:19:11 CEST 2018 - ms@suse.de
  
- Improve error handling on mount_config_source
  
  Provide more detail on the used sequence of mount
  calls and their errors
  
-------------------------------------------------------------------
Tue Jun 19 16:38:36 CEST 2018 - ms@suse.de
  
- Fixup ssh files ownership in user service
  
  ssh files must be owned by the user they belong to. In addition
  the home path of the root user is not located in the standard
  home directory of users and needs an extra handling. This
  Fixes #37
  
-------------------------------------------------------------------
Mon Jun 18 18:12:53 CEST 2018 - ms@suse.de
  
- networking is required
  
-------------------------------------------------------------------
Mon Jun 18 17:33:09 CEST 2018 - ms@suse.de
  
- Update schema constraints per review
  
-------------------------------------------------------------------
Thu Jun 14 14:59:09 CEST 2018 - ms@suse.de
  
- Added DVD fallback mounting sequence
  
  Primarily we mount a LUN by label, but if that failed a
  fallback mount from /dev/dvd kicks in. Only if that fails
  the overall mount attempt has failed. This Fixes #13
  
-------------------------------------------------------------------
Thu Jun 14 14:25:11 CEST 2018 - ms@suse.de
  
- Added schema validation for config file
  
  This Fixes #31
  
-------------------------------------------------------------------
Wed Jun 13 16:52:41 CEST 2018 - ms@suse.de
  
- Bump version: 1.0.0 → 1.1.0
  
-------------------------------------------------------------------
Wed Jun 13 12:26:11 CEST 2018 - ms@suse.de
  
- Make sure mount point path gets created
  
-------------------------------------------------------------------
Tue Jun 12 17:03:04 CEST 2018 - ms@suse.de
  
- Added storage to report service
  
-------------------------------------------------------------------
Tue Jun 12 16:45:37 CEST 2018 - ms@suse.de
  
- Added machine_constraints to report service
  
-------------------------------------------------------------------
Tue Jun 12 13:14:07 CEST 2018 - ms@suse.de
  
- Added free space validation
  
-------------------------------------------------------------------
Tue Jun 12 12:31:35 CEST 2018 - ms@suse.de
  
- Added storage service
  
  Updates fstab with new entries from the optional storage
  section and activates the new mount locations.
  This Fixes #10
  
-------------------------------------------------------------------
Tue Jun 12 11:25:42 CEST 2018 - ms@suse.de
  
- Separate issue report from cleanup service
  
  Put the report code into its own service and handle
  the dependency chain from within the systemd unit
  files. report runs after all services which creates a
  status report and cleanup runs after report
  
-------------------------------------------------------------------
Tue Jun 12 10:55:43 CEST 2018 - ms@suse.de
  
- Simplify dict access
  
-------------------------------------------------------------------
Tue Jun 12 10:43:26 CEST 2018 - ms@suse.de
  
- Use binary multiples of bytes (powers of two)
  
  Storage sizes as we work with here are always byte values
  
-------------------------------------------------------------------
Mon Jun 11 16:09:56 CEST 2018 - ms@suse.de
  
- Added machine constraint checker service
  
  Validate min_cores and min_memory constraints on the
  machine when booting. This Fixes #30
  
-------------------------------------------------------------------
Mon Jun 11 11:39:42 CEST 2018 - ms@suse.de
  
- Added overall state check for cleanup service
  
  Added check for success state from all services and update
  the /etc/issue file if one or more services have a failed
  state. This completes and Fixes #19
  
-------------------------------------------------------------------
Mon Jun 11 10:15:08 CEST 2018 - ms@suse.de
  
- Bump version: 0.4.1 → 1.0.0
  
-------------------------------------------------------------------
Mon Jun 11 10:11:38 CEST 2018 - ms@suse.de
  
- Handle missing credentials section as error
  
  If no credentials section is specified in the config file
  this should be reported as an error. That's because in the
  image no user login will be allowed and therefore the
  credentials setup from the config file is the only door
  opener and mandatory for any subsequent work with the
  system. This Fixes #29
  
-------------------------------------------------------------------
Fri Jun  8 18:01:49 CEST 2018 - ms@suse.de
  
- Fix unit test for install unit
  
-------------------------------------------------------------------
Fri Jun  8 17:21:31 CEST 2018 - ms@suse.de
  
- Better name for the user method
  
  As create_user actually creates or modifies if the
  user already exists, the name should reflect this
  
-------------------------------------------------------------------
Fri Jun  8 16:04:33 CEST 2018 - ms@suse.de
  
- Move status report directory to /var/lib
  
-------------------------------------------------------------------
Fri Jun  8 09:14:30 CEST 2018 - ms@suse.de
  
- Fixup user service for handling existing users
  
  If the user setup in the config file already exists on the
  system, the user service failed to add that user as it
  should rather modify it. This Fixes #25
  
-------------------------------------------------------------------
Fri Jun  8 08:39:29 CEST 2018 - ms@suse.de
  
- Handle missing packages source as error
  
  The install service did not handle an empty list of packages
  sources as an error and just proceeded without installing
  packages. However in the scope of the large instance setup
  it is expected that there are packages to install and if
  not this is an error condition. This Fixes #26
  
-------------------------------------------------------------------
Thu Jun  7 10:06:05 CEST 2018 - ms@suse.de
  
- Fixup ssh directory and setup file permissions
  
-------------------------------------------------------------------
Thu Jun  7 08:21:47 CEST 2018 - ms@suse.de
  
- Let services report result status
  
  In preperation to operate on an overall success or failed
  state depending on the result of the individual services,
  each service should have an easy way to report its result
  state. The StatusReport class implements this in a way
  that each service reports its state in a yaml file written
  to the directory provided by get_status_report_directory().
  As services are called by systemd and will run in parallel,
  one file per service name is created to avoid potential
  I/O conflicts on write. Issue #19
  
-------------------------------------------------------------------
Wed Jun  6 14:47:43 CEST 2018 - ms@suse.de
  
- Added cleanup service
  
  After all services got called the cleanup service kicks in
  and uninstalls the azure-li-services package. This Fixes #12
  
-------------------------------------------------------------------
Wed Jun  6 14:31:23 CEST 2018 - ms@suse.de
  
- Ensure /etc/suse_firstboot_config.yaml is at 0600
  
  This is related to Issue #12
  
-------------------------------------------------------------------
Mon Jun  4 18:20:48 CEST 2018 - ms@suse.de
  
- Cleanup of config file format
  
  Per discussion this commit adds a revised version of the
  config file format to become active. Basic changes are:
  
  * networking moved on toplevel
  * blade section gets deleted, sku moved to toplevel
  * storage section was reworked
  * new section machine_constraints contains min_cores and
    min_memory values the machine has to provide
    
-------------------------------------------------------------------
Fri Jun  1 12:38:20 CEST 2018 - ms@suse.de
    
- Bump version: 0.4.0 → 0.4.1
  
-------------------------------------------------------------------
Fri Jun  1 12:37:12 CEST 2018 - ms@suse.de
  
- Fixed rsync command invocation
  
  For pattern matching a shell environment is required
  
-------------------------------------------------------------------
Fri Jun  1 12:20:25 CEST 2018 - ms@suse.de
  
- Fixed call service unit
  
  Fixed wrong condition trigger file reference
  
-------------------------------------------------------------------
Fri Jun  1 10:00:13 CEST 2018 - ms@suse.de
  
- Bump version: 0.3.0 → 0.4.0
  
-------------------------------------------------------------------
Wed May 30 17:26:31 CEST 2018 - ms@suse.de
  
- Added package install service
  
  Allow to install packages from local repository
  This Fixes #7
  
-------------------------------------------------------------------
Wed May 30 11:19:31 CEST 2018 - ms@suse.de
  
- Bump version: 0.2.0 → 0.3.0
  
-------------------------------------------------------------------
Tue May 29 15:09:31 CEST 2018 - ms@suse.de
  
- Bump version: 0.1.0 → 0.2.0
  
-------------------------------------------------------------------
Thu May 24 09:38:12 CEST 2018 - rjschwei@suse.com
  
- Fix service ordering for network setup
  + The network setup needs to be written before any of the netwroking
    services are started by systemd, or we have to explicitly restart the
    networking. This order is only guaranteed with the network-pre.target
    
-------------------------------------------------------------------
Fri May 18 22:10:22 CEST 2018 - ms@suse.de
    
- Fixup sudo authorization
  
  Setup of sudoers and admin group must be done only once
  
-------------------------------------------------------------------
Fri May 18 21:50:02 CEST 2018 - ms@suse.de
  
- Allow for multiple user setup
  
  In addition more elements of the user can be specified
  such as user id, group and home_dir
  
-------------------------------------------------------------------
Fri May 18 20:32:09 CEST 2018 - ms@suse.de
  
- Be more clear on call argument
  
-------------------------------------------------------------------
Fri May 18 16:36:47 CEST 2018 - ms@suse.de
  
- Update runtime config key description
  
-------------------------------------------------------------------
Fri May 18 11:41:49 CEST 2018 - ms@suse.de
  
- Added script call service
  
-------------------------------------------------------------------
Fri May 18 10:58:11 CEST 2018 - ms@suse.de
  
- Added User service
  
  Creates the configured user and its access setup for ssh
  and sudo services in the scope of an Azure Li/Vli instance
  This Fixes #6
  
-------------------------------------------------------------------
Thu May 17 09:07:14 CEST 2018 - ms@suse.de
  
- Bump version: 0.0.6 → 0.1.0
  
-------------------------------------------------------------------
Wed May 16 16:53:10 CEST 2018 - ms@suse.de
  
- Refactor misleading class names
  
  Using Li in names that covers implementation for Li and VLi may
  lead to confusion in the future when we need to differentiate
  between the two, the namespace should be free for that purpose
  
-------------------------------------------------------------------
Wed May 16 16:40:19 CEST 2018 - ms@suse.de
  
- Time never stops
  
-------------------------------------------------------------------
Wed May 16 11:02:38 CEST 2018 - ms@suse.de
  
- Refactor network service
  
  Change on the design to allow for running different code
  paths depending on if the instance is a LargeInstance or
  a VeryLargeInstance. Apply the instance distinction with
  the network service
  
-------------------------------------------------------------------
Tue May 15 16:29:40 CEST 2018 - ms@suse.de
  
- Added azure-li-network service
  
  Work through the networking section of the Azure Li/Vli config
  file and setup the network configuration for this instance
  type. This Fixes #4
  
-------------------------------------------------------------------
Wed May  9 16:52:37 CEST 2018 - ms@suse.de
  
- Bump version: 0.0.5 → 0.0.6
  
-------------------------------------------------------------------
Wed May  9 16:51:47 CEST 2018 - ms@suse.de
  
- Fixed system unit
  
  systemd requires absolute path to binary
  
-------------------------------------------------------------------
Wed May  9 14:50:28 CEST 2018 - ms@suse.de
  
- Bump version: 0.0.4 → 0.0.5
  
-------------------------------------------------------------------
Wed May  9 14:50:13 CEST 2018 - ms@suse.de
  
- Fixed spec file
  
  python3-setuptools is required
  
-------------------------------------------------------------------
Tue May  8 09:35:29 CEST 2018 - ms@suse.de
  
- Fixed spec file template
  
  Update to common source tarball name
  
-------------------------------------------------------------------
Tue May  8 09:33:34 CEST 2018 - ms@suse.de
  
- Bump version: 0.0.3 → 0.0.4
  
-------------------------------------------------------------------
Tue May  8 09:33:00 CEST 2018 - ms@suse.de
  
- Update spec file
  
  Create common style source tarball
  
-------------------------------------------------------------------
Tue May  8 09:27:27 CEST 2018 - ms@suse.de
  
- Bump version: 0.0.2 → 0.0.3
  
-------------------------------------------------------------------
Tue May  8 09:24:24 CEST 2018 - ms@suse.de
  
- Build changelog from git history
  
-------------------------------------------------------------------
Tue May  8 09:21:25 CEST 2018 - ms@suse.de
  
- Bump version: 0.0.1 → 0.0.2
  
-------------------------------------------------------------------
Tue May  8 09:20:55 CEST 2018 - ms@suse.de
  
- Fixed bumpversion config file
  
  Wrong path to version file
  
-------------------------------------------------------------------
Mon May  7 11:11:40 CEST 2018 - ms@suse.de
  
- Update per agreement on config file name
  
-------------------------------------------------------------------
Fri May  4 12:13:41 CEST 2018 - ms@suse.de
  
- Implement config lookup service
  
  The implementation is based on mounting a device by label
  and lookup of a pre defined file name on the root of that
  mount point. This Fixes #1 and This Fixes #2
  
-------------------------------------------------------------------
Fri May  4 11:37:46 CEST 2018 - ms@suse.de
  
- Added Command and Path class
  
  Classes for command invocation and lookup
  
-------------------------------------------------------------------
Wed Apr 25 11:30:57 CEST 2018 - ms@suse.de
  
- Fixed spec file source directory name
  
-------------------------------------------------------------------
Wed Apr 25 11:27:04 CEST 2018 - ms@suse.de
  
- Fixed spec file source name
  
-------------------------------------------------------------------
Wed Apr 25 11:21:50 CEST 2018 - ms@suse.de
  
- Added config_lookup service
  
  Implementation is still incomplete as we don't know
  how Azure presents the file to the instance.
  
-------------------------------------------------------------------
Mon Apr 23 16:59:20 CEST 2018 - ms@suse.de
  
- Added RuntimeConfig class
  
  Implements reading of Azure LI/VLI runtime config file
  
-------------------------------------------------------------------
Mon Apr 23 15:47:19 CEST 2018 - ms@suse.de
  
- Add package template

Places

File azure-li-services.changes of Package azure-li-services (Revision a2cec6322bd85c62fc61d0f1b2348033)

Places