openSUSE Build Service

Overview Repositories Revisions Requests Users Attributes Meta

Revisions of pipewire

Antonio Larrosa (alarrosa) accepted request 1101197 from

Antonio Larrosa (alarrosa) 10 months ago (revision 143)

      by the session manager (boo#1213682).

Antonio Larrosa (alarrosa) accepted request 1101182 from

Antonio Larrosa (alarrosa) 10 months ago (revision 142)

- Update to version 0.3.76:
  * Highlights
    - Fix a regression that would cause the MPV pipewire backend
      to fail because of a spurious thread-loop signal.
    - Fix a crash when DBus is not found.
    - ALSA hires timestamps are now disabled by default.
    - Some more fixes and improvements.
  * PipeWire
    - A new option was added to pw-thread-loop to signal when the
      thread starts.
    - This is only used in module-rt to avoid regressions in mpv.
      (#3374)
    - Fix a compilation problem.
    - Stream flags now only set the properties when not already
      set. This fixes a regression with node autoconnect. (#3382)
  * Tools
    - pw-cat will now stop when the stream is disconnected. (#2731)
    - Improve the pw-cat man page, mention that stdin/stdout
      handling is only on raw data.
  * modules
    - module-rt will now not crash when dbus is not available but
      error out as before.
    - A new VBAN (vb-audio.com) sender and receiver was added.
      (#3380)
  * SPA
    - Add an option in audioconvert to disable volume updates.
      (#3361)
    - ALSA hires timestamps are disabled by default because many
      drivers seem to give wrong timestamps and cause extra delay.
  * bluetooth

buildservice-autocommit accepted request 1100810 from

Antonio Larrosa (alarrosa) 11 months ago (revision 141)

baserev update by copy to link target

Antonio Larrosa (alarrosa) accepted request 1100809 from

Antonio Larrosa (alarrosa) 11 months ago (revision 140)

- Add code in the spec file to modify the patch file 
  reduce-meson-dependency.patch (used to build in SLE/Leap) so that
  we don't need to rebase it manually for every version update.
- Use gcc 11 in SLE/Leap since gcc 9 fails to build 0.3.75 with
  ../spa/include/spa/utils/cleanup.h:52:13: error: dereferencing pointer to incomplete type ‘DIR’ {aka ‘struct __dirstream’}
     52 |  __typeof__(*(ptr)) *_old_value = spa_steal_ptr(ptr); \

      potential portal managed screencast nodes to link to the
      camera even though it was not assigned permissions to do so
      by the session manager.
    - Permissions for links between nodes are now enforced. The
      link will now check that the owner clients of the nodes can
      see each other before allowing the link. This avoids
      screensharing clients to accidentally being linked to the
      camera nodes by the session manager. A side effect is that
      patchbay tools will no longer be able to link portal managed
      screencast nodes to the camera, for this we need a new
      permission for those patchbay clients.
    - The stream.rules/filter.rules are now evaluated when
      connecting the stream/filter so that more properties can be
      matched.
    - Move some internal events from the context to the nodes to
      better handle per-node threads in the future.
    - Atomic operation macros were move from internal pipewire API
      to public API.
      SPA_VIDEO_FLAG_MODIFIER_FIXATION_REQUIRED flag to instruct
      the application to fixate the modifiers. This simplifies some
      logic in applications a lot.

Antonio Larrosa (alarrosa) accepted request 1100514 from

llyyr (llyyr) 11 months ago (revision 139)

- Update to version 0.3.75:
  * Highlights
    - Link permissions between nodes are now enforced. This avoids 
      potential portal managed screencast nodes to link to the camera
      even though it was not assigned permissions to do so by the 
      session manager.
    - Libcamera and v4l2 devices now have properties so that 
      duplicates can be filtered out by the session manager.
    - A bug with draining was fixed where a buffer would be marked 
      EMPTY and would not play when it contained drained samples.
    - Many fixes and improvements.
  * PipeWire
    - Permissions for links between nodes are now enforced. The link
      will now check that the owner clients of the nodes can see each
      other before allowing the link. This avoids screensharing clients
      to accidentally being linked to the camera nodes by the session
      manager. A side effect is that patchbay tools will no longer be
      able to link portal managed screencast nodes to the camera, for
      this we need a new permission for those patchbay clients.
    - The stream.rules/filter.rules are now evaluated when connecting 
      the stream/filter so that more properties can be matched.
    - Move some internal events from the context to the nodes to better
      handle per-node threads in the future.
    - The thread-loop will now signal when the thread is started.
  * modules
    - A timestamp workaround in module-raop was reverted because it 
      does not work in all cases. Instead latency was increased to 
      1.5 seconds, which also makes the problematic device in 
      question work.
    - The profiler module was reworked a bit to use the new node 
      realtime events. It should now also handle dynamically added
      and removed drivers.
    - The module-rt now does the rtkit calls from a separate thread 
      so that it does not block the main thread. This could cause 
      deadlocks during startup in some cases.
  * SPA
    - Atomic operation macros were move from internal pipewire API to
      public API.
    - The video-info structure now has a new 
      SPA_VIDEO_FLAG_MODIFIER_FIXATION_REQUIRED flag to instruct the 
      application to fixate the modifiers. This simplifies some logic
      in applications a lot.
    - The libcamera and v4l2 nodes now have properties to enumerate 
      the device id they are using. This can be used to match v4l2
      devices and libcamera devices and filter out duplicates.
    - A bug with draining was fixed where a buffer would be marked 
      EMPTY and would not

buildservice-autocommit accepted request 1099024 from

Antonio Larrosa (alarrosa) 11 months ago (revision 138)

baserev update by copy to link target

Antonio Larrosa (alarrosa) accepted request 1098340 from

Alexei Sorokin (XRevan86) 11 months ago (revision 137)

- Update to version 0.3.74.

buildservice-autocommit accepted request 1095401 from

Antonio Larrosa (alarrosa) 11 months ago (revision 136)

baserev update by copy to link target

Antonio Larrosa (alarrosa) accepted request 1095379 from

Antonio Larrosa (alarrosa) 12 months ago (revision 135)

- Update to version 0.3.72:
  * Highlights
    - Fix a critical bug that would refuse to update the samplerate
      or buffersize in JACK clients.
    - A new module-netjack2-driver and module-netjack2-manager were
      added that are compatible with NETJACK2. This allows PipeWire
      to become a NETJACK2 manager or a driver between JACK2 or
      PipeWire servers.
    - Support was added for firewire devices with FFADO. This is
      untested for now and MIDI is not implemented yet.
    - The node scheduling was optimized some more. External drivers
      are now as efficient as in-server ones. This should improve
      performance of various drivers such as bluetooth and JACK
      based drivers.
    - Many, many bug fixes and a ton of improvements.
  * PipeWire
    - pw-filter can now be used to write sinks and sources.
    - The node activation for drivers was changed. The driver now
      does not need to go to the server to start the processing
      cycle. This makes out-of-server drivers as efficient as
      in-server drivers.
    - Don't try to use drivers with 0 priority as fallback drivers.
      This avoids making the screencast driver a driver for audio.
    - Improve xrun count reporting in pw-top and the profiler. Now
      each node has their own xrun counter updated when it fails to
      complete processing during the cycle.
    - pw-filter now also has support for TRIGGER.
    - A potential fd leak was found when fds were send to a zombie
      client.
    - Fix a bug where monitor or capture streams were logged twice

buildservice-autocommit accepted request 1089545 from

Antonio Larrosa (alarrosa) about 1 year ago (revision 134)

baserev update by copy to link target

Antonio Larrosa (alarrosa) accepted request 1088088 from

Alexei Sorokin (XRevan86) about 1 year ago (revision 133)

buildservice-autocommit accepted request 1087689 from

Antonio Larrosa (alarrosa) about 1 year ago (revision 132)

baserev update by copy to link target

Antonio Larrosa (alarrosa) accepted request 1087688 from

Antonio Larrosa (alarrosa) about 1 year ago (revision 131)

- Update to version 0.3.71:
  * Highlights
    - A new zero-latency jackdbus bridge was added. This works
      similar to what PulseAudio has to offer and creates a
      sink/source when jackdbus is started. It is however much more
      efficient and runs the complete PipeWire graph as a
      synchronous JACK client with no added latency.
    - Many performance improvements. Activation of remote nodes is
      more efficient, fewer eventfds are required on the clients,
      less callback overhead in performence critical paths and an
      optimized poll function was added. This was mainly driven by
      the jackdbus module to get the lowest possible overhead when
      running the graph.
    - The JACK notify callback implementation was reworked to
      emulate better what JACK does, improving compatibility with
      ardour7 and the JACK stress test.
    - More work on BAP devices. Device latency is now passed on to
      applications also for multi-device headsets, and channel
      allocation is handled better.
    - Many more improvements and bugfixes.
  * PipeWire
    - Remove the hardcoded limit on io_areas. This is used to link
      nodes together and exchange buffers, it was limited to 2048
      but now dynamically scales based on requirements.
    - Rate and quantum changes are now applied correctly in more
      cases. (#3159)
    - Updates to client-node to more efficiently process the
      driver.
    - The profiler information was improved to be more accurate.
      It should now work better for remote drivers.

buildservice-autocommit accepted request 1086211 from

Antonio Larrosa (alarrosa) about 1 year ago (revision 130)

baserev update by copy to link target

Antonio Larrosa (alarrosa) accepted request 1084065 from

Alexei Sorokin (XRevan86) about 1 year ago (revision 129)

Antonio Larrosa (alarrosa) accepted request 1080926 from

Antonio Larrosa (alarrosa) about 1 year ago (revision 128)

- Update to version 0.3.70:
  * Highlights:
    - Fix a regression in the scheduler that could keep some nodes
      IDLE.
    - Fix a regression in the biquad filters in filter-chain.
    - Fix a regression and potential crash in the ALSA mixer
      probing.
    - Fix a regression in pipewiresrc with timestamps that could
      cause cheese to record video with wrong timestamps.
    - Beamforming support was enabled in the echo-canceler.
    - pulse-tunnel and raop-sink will now proxy local volume
      changes to the remote end.
    - More bugfixes and improvements.
  * PipeWire
    - Fix a bug in the graph scheduler where some nodes might stay
      IDLE in some cases (like when connecting the source of the
      echo-canceler to the sink).
    - pw-metadata can now be created from the factory with initial
      values for the metadata. (#3076)
    - Conditions were added to the pipewire config file to make it
      possible to configure the access module and the exec sections.
    - Support was added in pw-stream to intercept and override
      properties for the adapter. This can be used to implement
      custom volume control, for example.
  * Tools
    - pw-metadata can now list all available metadata objects with
      the -l option.
    - A new pw-config tool was added to debug configuration file
      loading and parsing.
  * Modules

Antonio Larrosa (alarrosa) accepted request 1080187 from

Dirk Mueller (dirkmueller) about 1 year ago (revision 127)

- reenable ffmpeg plugin by building against ffmpeg-5-mini

buildservice-autocommit accepted request 1079813 from

Antonio Larrosa (alarrosa) about 1 year ago (revision 126)

baserev update by copy to link target

Antonio Larrosa (alarrosa) committed about 1 year ago (revision 125)

  during build is too old.

Antonio Larrosa (alarrosa) accepted request 1079436 from

Bjørn Lie (iznogood) about 1 year ago (revision 124)

- Only apply reduce-meson-dependency.patch when meson present
  during build is to old.

Displaying revisions 61 - 80 of 203

Places

Revisions of pipewire

Places